With latest llvm compiler, running test_progs will have the following
verifier failure for test_sysctl_loop1.o:

  libbpf: load bpf program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  invalid indirect read from stack var_off (0x0; 0xff)+196 size 7
  ...
  libbpf: -- END LOG --
  libbpf: failed to load program 'cgroup/sysctl'
  libbpf: failed to load object 'test_sysctl_loop1.o'

The related bytecode looks as below:

  0000000000000308 LBB0_8:
      97:       r4 = r10
      98:       r4 += -288
      99:       r4 += r7
     100:       w8 &= 255
     101:       r1 = r10
     102:       r1 += -488
     103:       r1 += r8
     104:       r2 = 7
     105:       r3 = 0
     106:       call 106
     107:       w1 = w0
     108:       w1 += -1
     109:       if w1 > 6 goto -24 <LBB0_5>
     110:       w0 += w8
     111:       r7 += 8
     112:       w8 = w0
     113:       if r7 != 224 goto -17 <LBB0_8>

And source code:

     for (i = 0; i < ARRAY_SIZE(tcp_mem); ++i) {
             ret = bpf_strtoul(value + off, MAX_ULONG_STR_LEN, 0,
                               tcp_mem + i);
             if (ret <= 0 || ret > MAX_ULONG_STR_LEN)
                     return 0;
             off += ret & MAX_ULONG_STR_LEN;
     }

Current verifier is not able to conclude that register w0 before '+'
at insn 110 has a range of 1 to 7 and thinks it is from 0 - 255. This
leads to more conservative range for w8 at insn 112, and later verifier
complaint.

Let us workaround this issue until we found a compiler and/or verifier
solution. The workaround in this patch is to make variable 'ret' volatile,
which will force a reload and then '&' operation to ensure better value
range. With this patch, I got the below byte code for the loop:

  0000000000000328 LBB0_9:
     101:       r4 = r10
     102:       r4 += -288
     103:       r4 += r7
     104:       w8 &= 255
     105:       r1 = r10
     106:       r1 += -488
     107:       r1 += r8
     108:       r2 = 7
     109:       r3 = 0
     110:       call 106
     111:       *(u32 *)(r10 - 64) = r0
     112:       r1 = *(u32 *)(r10 - 64)
     113:       if w1 s< 1 goto -28 <LBB0_5>
     114:       r1 = *(u32 *)(r10 - 64)
     115:       if w1 s> 7 goto -30 <LBB0_5>
     116:       r1 = *(u32 *)(r10 - 64)
     117:       w1 &= 7
     118:       w1 += w8
     119:       r7 += 8
     120:       w8 = w1
     121:       if r7 != 224 goto -21 <LBB0_9>

Insn 117 did the '&' operation and we got more precise value range
for 'w8' at insn 120. The test is happy then:

  #3/17 test_sysctl_loop1.o:OK
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NSong Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191107170045.2503480-1-yhs@fb.com

The libbpf AF_XDP code is extended to allow for the creation of Rx
only or Tx only sockets. Previously it returned an error if the socket
was not initialized for both Rx and Tx.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Tested-by: NWilliam Tu <u9012063@gmail.com>
Acked-by: NJonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-4-git-send-email-magnus.karlsson@intel.com

Add support in libbpf to create multiple sockets that share a single
umem. Note that an external XDP program need to be supplied that
routes the incoming traffic to the desired sockets. So you need to
supply the libbpf_flag XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD and load
your own XDP program.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Tested-by: NWilliam Tu <u9012063@gmail.com>
Acked-by: NJonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-2-git-send-email-magnus.karlsson@intel.com

This adds a new getter for the BPF program size (in bytes). This is useful
for a caller that is trying to predict how much memory will be locked by
loading a BPF object into the kernel.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSong Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333185272.88376.10996937115395724683.stgit@toke.dk

Currently, libbpf only provides a function to get a single ID for the XDP
program attached to the interface. However, it can be useful to get the
full set of program IDs attached, along with the attachment mode, in one
go. Add a new getter function to support this, using an extendible
structure to carry the information. Express the old bpf_get_link_id()
function in terms of the new function.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSong Liu <songliubraving@fb.com>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157333185164.88376.7520653040667637246.stgit@toke.dk

The netlink functions were using fprintf(stderr, ) directly to print out
error messages, instead of going through the usual logging macros. This
makes it impossible for the calling application to silence or redirect
those error messages. Fix this by switching to pr_warn() in nlattr.c and
netlink.c.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSong Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333185055.88376.15999360127117901443.stgit@toke.dk

When loading an eBPF program, libbpf overrides the return code for EPERM
errors instead of returning it to the caller. This makes it hard to figure
out what went wrong on load.

In particular, EPERM is returned when the system rlimit is too low to lock
the memory required for the BPF program. Previously, this was somewhat
obscured because the rlimit error would be hit on map creation (which does
return it correctly). However, since maps can now be reused, object load
can proceed all the way to loading programs without hitting the error;
propagating it even in this case makes it possible for the caller to react
appropriately (and, e.g., attempt to raise the rlimit before retrying).
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSong Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333184946.88376.11768171652794234561.stgit@toke.dk

This add tests for the different variations of automatic map unpinning on
load failure.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSong Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333184838.88376.8243704248624814775.stgit@toke.dk

Since the automatic map-pinning happens during load, it will leave pinned
maps around if the load fails at a later stage. Fix this by unpinning any
pinned maps on cleanup. To avoid unpinning pinned maps that were reused
rather than newly pinned, add a new boolean property on struct bpf_map to
keep track of whether that map was reused or not; and only unpin those maps
that were not reused.

Fixes: 57a00f41 ("libbpf: Add auto-pinning of maps when loading BPF objects")
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSong Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333184731.88376.9992935027056165873.stgit@toke.dk

Access the skb->cb[] in the kfree_skb test.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191107180905.4097871-1-kafai@fb.com

If we get ELF file with "maps" section, but no symbols pointing to it, we'll
end up with division by zero. Add check against this situation and exit early
with error. Found by Coverity scan against Github libbpf sources.

Fixes: bf829271 ("libbpf: refactor map initialization")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-6-andriin@fb.com

Perform size check always in btf__resolve_size. Makes the logic a bit more
robust against corrupted BTF and silences LGTM/Coverity complaining about
always true (size < 0) check.

Fixes: 69eaab04 ("btf: extract BTF type size calculation")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-5-andriin@fb.com

Fix few issues found by Coverity and LGTM.

Fixes: b053b439 ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-4-andriin@fb.com

Fix a potential overflow issue found by LGTM analysis, based on Github libbpf
source code.

Fixes: 3d650141 ("bpf: libbpf: Add btf_line_info support to libbpf")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-3-andriin@fb.com

Coverity scan against Github libbpf code found the issue of not freeing memory and
leaving already freed memory still referenced from bpf_program. Fix it by
re-assigning successfully reallocated memory sooner.

Fixes: 2993e051 ("tools/bpf: add support to read .BTF.ext sections")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-2-andriin@fb.com

Fix issue reported by static analysis (Coverity). If bpf_prog_get_fd_by_id()
fails, xsk_lookup_bpf_maps() will fail as well and clean-up code will attempt
close() with fd=-1. Fix by checking bpf_prog_get_fd_by_id() return result and
exiting early.

Fixes: 10a13bb4 ("libbpf: remove qidconf and better support external bpf programs.")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107054059.313884-1-andriin@fb.com

When compiling larger programs with bpf_asm, it's possible to
accidentally exceed jt/jf range, in which case it won't complain, but
rather silently emit a truncated offset, leading to a "happy debugging"
situation.

Add a warning to help detecting such issues. It could be made an error
instead, but this might break compilation of existing code (which might
be working by accident).
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107100349.88976-1-iii@linux.ibm.com

Streamline BPF_CORE_READ_BITFIELD_PROBED interface to follow
BPF_CORE_READ_BITFIELD (direct) and BPF_CORE_READ, in general, i.e., just
return read result or 0, if underlying bpf_probe_read() failed.

In practice, real applications rarely check bpf_probe_read() result, because
it has to always work or otherwise it's a bug. So propagating internal
bpf_probe_read() error from this macro hurts usability without providing real
benefits in practice. This patch fixes the issue and simplifies usage,
noticeable even in selftest itself.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191106201500.2582438-1-andriin@fb.com

As part of 42765ede ("selftests/bpf: Remove too strict field offset relo
test cases"), few ints relocations negative (supposed to fail) tests were
removed, but not completely. Due to them being negative, some leftovers in
prog_tests/core_reloc.c went unnoticed. Clean them up.

Fixes: 42765ede ("selftests/bpf: Remove too strict field offset relo test cases")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191106173659.1978131-1-andriin@fb.com

Add test verifying correctness and logic of field size relocation support in
libbpf.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-6-andriin@fb.com

Add a bunch of selftests verifying correctness of relocatable bitfield reading
support in libbpf. Both bpf_probe_read()-based and direct read-based bitfield
macros are tested. core_reloc.c "test_harness" is extended to support raw
tracepoint and new typed raw tracepoints as test BPF program types.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-5-andriin@fb.com

Add bpf_core_field_size() macro, capturing a relocation against field size.
Adjust bits of internal libbpf relocation logic to allow capturing size
relocations of various field types: arrays, structs/unions, enums, etc.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-4-andriin@fb.com

Add support for the new field relocation kinds, necessary to support
relocatable bitfield reads. Provide macro for abstracting necessary code doing
full relocatable bitfield extraction into u64 value. Two separate macros are
provided:
- BPF_CORE_READ_BITFIELD macro for direct memory read-enabled BPF programs
(e.g., typed raw tracepoints). It uses direct memory dereference to extract
bitfield backing integer value.
- BPF_CORE_READ_BITFIELD_PROBED macro for cases where bpf_probe_read() needs
to be used to extract same backing integer value.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-3-andriin@fb.com

As libbpf is going to gain support for more field relocations, including field
size, some restrictions about exact size match are going to be lifted. Remove
test cases that explicitly test such failures.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-2-andriin@fb.com

Tested on x86-64 and Ilya was also kind enough to give it a spin on
s390x, both passing with probe_user:OK there. The test is using the
newly added bpf_probe_read_user() to dump sockaddr from connect call
into .bss BPF map and overrides the user buffer via bpf_probe_write_user():

  # ./test_progs
  [...]
  #17 pkt_md_access:OK
  #18 probe_user:OK
  #19 prog_run_xattr:OK
  [...]
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Tested-by: NIlya Leoshkevich <iii@linux.ibm.com>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/90f449d8af25354e05080e82fc6e2d3179da30ea.1572649915.git.daniel@iogearbox.net

Use probe read *_{kernel,user}{,_str}() helpers instead of bpf_probe_read()
or bpf_probe_read_user_str() for program tests where appropriate.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/4a61d4b71ce3765587d8ef5cb93afa18515e5b3e.1572649915.git.daniel@iogearbox.net

The current bpf_probe_read() and bpf_probe_read_str() helpers are broken
in that they assume they can be used for probing memory access for kernel
space addresses /as well as/ user space addresses.

However, plain use of probe_kernel_read() for both cases will attempt to
always access kernel space address space given access is performed under
KERNEL_DS and some archs in-fact have overlapping address spaces where a
kernel pointer and user pointer would have the /same/ address value and
therefore accessing application memory via bpf_probe_read{,_str}() would
read garbage values.

Lets fix BPF side by making use of recently added 3d708182 ("uaccess:
Add non-pagefault user-space read functions"). Unfortunately, the only way
to fix this status quo is to add dedicated bpf_probe_read_{user,kernel}()
and bpf_probe_read_{user,kernel}_str() helpers. The bpf_probe_read{,_str}()
helpers are kept as-is to retain their current behavior.

The two *_user() variants attempt the access always under USER_DS set, the
two *_kernel() variants will -EFAULT when accessing user memory if the
underlying architecture has non-overlapping address ranges, also avoiding
throwing the kernel warning via 00c42373 ("x86-64: add warning for
non-canonical user access address dereferences").

Fixes: a5e8c070 ("bpf: add bpf_probe_read_str helper")
Fixes: 2541517c ("tracing, perf: Implement BPF programs attached to kprobes")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/796ee46e948bc808d54891a1108435f8652c6ca4.1572649915.git.daniel@iogearbox.net

This adds a new BPF selftest to exercise the new automatic map pinning
code.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269298209.394725.15420085139296213182.stgit@toke.dk

This adds support to libbpf for setting map pinning information as part of
the BTF map declaration, to get automatic map pinning (and reuse) on load.
The pinning type currently only supports a single PIN_BY_NAME mode, where
each map will be pinned by its name in a path that can be overridden, but
defaults to /sys/fs/bpf.

Since auto-pinning only does something if any maps actually have a
'pinning' BTF attribute set, we default the new option to enabled, on the
assumption that seamless pinning is what most callers want.

When a map has a pin_path set at load time, libbpf will compare the map
pinned at that location (if any), and if the attributes match, will re-use
that map instead of creating a new one. If no existing map is found, the
newly created map will instead be pinned at the location.

Programs wanting to customise the pinning can override the pinning paths
using bpf_map__set_pin_path() before calling bpf_object__load() (including
setting it to NULL to disable pinning of a particular map).
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269298092.394725.3966306029218559681.stgit@toke.dk

The existing pin_*() functions all try to create the parent directory
before pinning. Move this check into the per-object _pin() functions
instead. This ensures consistent behaviour when auto-pinning is
added (which doesn't go through the top-level pin_maps() function), at the
cost of a few more calls to mkdir().
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297985.394725.5882630952992598610.stgit@toke.dk

Support storing and setting a pin path in struct bpf_map, which can be used
for automatic pinning. Also store the pin status so we can avoid attempts
to re-pin a map that has already been pinned (or reused from a previous
pinning).

The behaviour of bpf_object__{un,}pin_maps() is changed so that if it is
called with a NULL path argument (which was previously illegal), it will
(un)pin only those maps that have a pin_path set.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297876.394725.14782206533681896279.stgit@toke.dk

bpf_map__reuse_fd() was calling close() in the error path before returning
an error value based on errno. However, close can change errno, so that can
lead to potentially misleading error messages. Instead, explicitly store
errno in the err variable before each goto.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297769.394725.12634985106772698611.stgit@toke.dk

DebugFS for netdevsim now contains some "action trigger" files
which are write only. Don't try to capture the contents of those.

Note that we can't use os.access() because the script requires
root.

Fixes: 4418f862 ("netdevsim: implement support for devlink region and snapshots")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.

Fixes: d6a61f80 ("soreuseport: test mixed v4/v6 sockets")
Reported-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWei Wang <weiwan@google.com>
Cc: Craig Gallek <cgallek@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRoman Mashak <mrv@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 5bc60de5 ("selftests: bpf: Don't try to read
files without read permission").

Quoted commit does not work at all, and was never tested.
Script requires root permissions (and tests for them)
and os.access() will always return true for root.

The correct fix is needed in the bpf tree, so let's just
revert and save ourselves the merge conflict.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Cc: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/bpf/20191101005127.1355-1-jakub.kicinski@netronome.com

Cleanup libbpf from expected_attach_type == attach_btf_id hack
and introduce BPF_PROG_TYPE_TRACING.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191030223212.953010-3-ast@kernel.org

Add basic tests to verify action creation with new fast_init flag for all
actions that support the flag.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Two pedit tests were failing due to incorrect operation
value in matchPattern, should be 'add' not 'val', so fix it.
Signed-off-by: NRoman Mashak <mrv@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are tests for full and narrows loads from bpf_sysctl.file_pos, but
for bpf_sysctl.write only full load is tested. Add the missing test.
Suggested-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAndrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20191029143027.28681-1-iii@linux.ibm.com