- 01 10月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
The recent __must_check stuff flagged some error handling bugs. phy/fixed.c: * handle device_bind_driver() failure phy/phy_device.c: * handle device_bind_driver() failure * release rwsem upon failure Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 30 9月, 2006 5 次提交
-
-
由 Michael Chan 提交于
MSI is defined to be 32-bit write. The 5706 does 64-bit MSI writes with byte enables disabled on the unused 32-bit word. This is legal but causes problems on the AMD 8132 which will eventually stop responding after a while. Without this patch, the MSI test done by the driver during open will pass, but MSI will eventually stop working after a few MSIs are written by the device. AMD believes this incompatibility is unique to the 5706, and prefers to locally disable MSI rather than globally disabling it using pci_msi_quirk. Update version to 1.4.45. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Sesterhenn 提交于
For len equal to 4, we never call sppp_lcp_conf_parse_options(), therefore rmagic does not get initialized. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Acked-by: NPaul Fulghum <paulkf@microgate.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arjan van de Ven 提交于
Introduce the disable_irq_nosync_lockdep_irqsave() and enable_irq_lockdep_irqrestore() APIs. These are needed for NE2000; basically NE2000 calls disable_irq and enable_irq as locking against the IRQ handler, but both in cases where interrupts are on and off. This means that lockdep needs to track the old state of the virtual irq flags on disable_irq, and restore these at enable_irq time. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rolf Eike Beer 提交于
As suggested by Muli Ben-Yehuda this function is moved to generic code as may be useful for all archs. [akpm@osdl.org: fix] Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Komal Shah 提交于
Add smc91x support for TI OMAP2420 H4 EVM board. Cc: <nico@cam.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 9月, 2006 19 次提交
-
-
由 Samuel Ortiz 提交于
FIFOCTL_RXERR and FIFOCTL_TXERR are undocumented bits, according to the Sigmatel datasheet. We should thus not take any assumption on their values and semantics. Problem spotted by andrzej zaborowski <balrogg@gmail.com> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Walleij (LD/EAB 提交于
This patch detects the smsc-ircc chipset on the nx1000 (including nx7000 and nx7010) and the nx5000 HP/Compaq laptop series. Patch from "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lamarque Vieira Souza 提交于
According to NatSemi datasheet, the configuration base address for the PC8738x family is 0x2e or 0x164. 0x0 doesn't appear in any datasheet. Patch from Lamarque Vieira Souza <lamarque@gmail.com> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The loopback device status structure is a singleton and doesn't need to be allocated. Add ethtool_ops hooks to show checksum always on, and make ethtool_ops const. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samuel Ortiz 提交于
With the inclusion of the stir421x code, we now need to select FW_LOADER whenever we try to build the irda-usb code. Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Ostrowski 提交于
PPPoE must advertise the underlying device's MTU via the ppp channel descriptor structure, as multilink functionality depends on it. Signed-off-by: NMichal Ostrowski <mostrows@earthlink.net> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 3.66. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add support for the 5709 10/100 PHY. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add support for the new 5709 device. This is a new 10/100 Mbps chip. The mailbox access and firmware interface are quite different from all other tg3 chips. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Put the firmware polling logic into a separate function. This makes the code cleaner. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add IDs to support 5722 and 5756. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Some PHY related fixes: 1. Fix Serdes WoL. 2. Fix loopback test on 10/100 only devices. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Change to a different ASF heartbeat message code to improve reliability. There were some reports of unintended resets on real time kernels where the timer may be slow and cause the heartbeat to be late. Netpoll will also have the same problem because the timer irq will be unavailable. Using the new heartbeat code, the ASF firmware will also check the ring condition before resetting the chip when the heartbeat is expiring. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Improve 5704S autoneg logic by using a serdes_counter field to keep track of the transient states. This eliminates a 200 msec busy loop in the code. Autoneg will take its course without the driver busy waiting for it to finish. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
ifa_local, ifa_address, ifa_mask, ifa_broadcast and ifa_anycast are net-endian. Annotated them and variables that are inferred to be net-endian. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Net devices should depend on NETDEVICES, so revert part of Paolo's previous patch. See http://marc.theaimsgroup.com/?l=linux-kernel&m=115566326218740&w=2 for history. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chuck Short 提交于
Fix memory leak. Coverity id# 653 patch location: http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=a1f34cb68b16807ed9d5ebb0f6a6ec5ff8a5fc78Signed-off-by: NChuck Short <zulcss@gmail.com> Signed-off-by: NBen Collins <bcollins@ubuntu.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 9月, 2006 15 次提交
-
-
由 Andrew Victor 提交于
This is more preparation for adding support for the new Atmel AT91SAM9 processors. Changes include: - Replace AT91_BASE_* with AT91RM9200_BASE_* - Replace AT91_ID_* with AT91RM9200_ID_* - ROM, SRAM and UHP address definitions moved to at91rm9200.h. - The raw AT91_P[ABCD]_* definitions are now depreciated in favour of the GPIO API. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Olof Johansson 提交于
A driver shouldn't compare to DMA_ERROR_CODE directly, use pci_dma_mapping_error() instead. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Version 1.9 is for 2.6.19. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Use hardware support for chained receive to break up large frames into multiple pages. This avoids having to do a mult-page allocation that can fail on a busy system due to fragmented memory. For normal size MTU, this code behaves the same. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Use the netdevice transmit lock via netif_tx_lock rather than putting lock in device specific code and using lockless transmit. The code is cleaner using netif_tx_lock, and the performance is same. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Since a transmit can take several control blocks, the old code waited until the last control block was marked as done. This code processes the return values incrementally. This makes slots in the tx ring available and less chance of getting stuck. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Use the ethernet device name when requesting the irq because the irqbalance daemon looks for the name when deciding policy. Better to play along with this dubious heuristic. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Workarounds for 88e806x chips from the vendor driver. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Use the standard pci capability mechanism to access PCI express error registers, rather than hard coding the offset. Mask off the PCI express error from ever occuring on non-PCI express systems. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Look at the registers correctly, when doing gigabit full duplex. Need to look for link partner result. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Vosburgh 提交于
I neglected to properly update the version number in the recent patch series; this sets it to something reasonable. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Andrew Morton 提交于
In file included from drivers/net/wan/pc300_tty.c:59: drivers/net/wan/pc300.h:335: error: field 'pppdev' has incomplete type Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Auke Kok 提交于
e100-3.5.17-k2 e1000-7.2.9-k2 ixgb-1.0.117-k2 Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
-
由 Auke Kok 提交于
PCI error recovery code recently merged needs to use netdev_priv Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
-
由 Jesse Brandeburg 提交于
We experimented with more descriptor buffer writebacks and found that values larger than 8 give HW problems, but 8 is safe and gives us some improved performance. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
-