Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 02 9月, 2021 1 次提交
  3. 26 8月, 2021 1 次提交
    • P
      selftests/net: allow GRO coalesce test on veth · 9af771d2
      由 Paolo Abeni 提交于 
      This change extends the existing GRO coalesce test to
allow running on top of a veth pair, so that no H/W dep
is required to run them.

By default gro.sh will use the veth backend, and will try
to use exiting H/W in loopback mode if a specific device
name is provided with the '-i' command line option.

No functional change is intended for the loopback-based
tests, just move all the relevant initialization/cleanup
code into the related script.

Introduces a new initialization helper script for the
veth backend, and plugs the correct helper script according
to the provided command line.

Additionally, enable veth-based tests by default.

v1 -> v2:
  - drop unused code in setup_veth_ns() - Willem
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9af771d2
  5. 05 8月, 2021 2 次提交
    • C
      selftests/net: toeplitz test · 5ebfb4cc
      由 Coco Li 提交于 
      To verify that this hash implements the Toeplitz hash function.

Additionally, provide a script toeplitz.sh to run the test in loopback mode
on a networking device of choice (see setup_loopback.sh). Since the
script modifies the NIC setup, it will not be run by selftests
automatically.

Tested:
./toeplitz.sh -i eth0 -irq_prefix <eth0_pattern> -t -6
carrier ready
rxq 0: cpu 14
rxq 1: cpu 20
rxq 2: cpu 17
rxq 3: cpu 23
cpu 14: rx_hash 0x69103ebc [saddr fda8::2 daddr fda8::1 sport 58938 dport 8000] OK rxq 0 (cpu 14)
...
cpu 20: rx_hash 0x257118b9 [saddr fda8::2 daddr fda8::1 sport 59258 dport 8000] OK rxq 1 (cpu 20)
count: pass=111 nohash=0 fail=0
Test Succeeded!
Signed-off-by: NCoco Li <lixiaoyan@google.com>
Reviewed-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5ebfb4cc
    • C
      selftests/net: GRO coalesce test · 7d157501
      由 Coco Li 提交于 
      Implement a GRO testsuite that expects Linux kernel GRO behavior.
All tests pass with the kernel software GRO stack. Run against a device
with hardware GRO to verify that it matches the software stack.

gro.c generates packets and sends them out through a packet socket. The
receiver in gro.c (run separately) receives the packets on a packet
socket, filters them by destination ports using BPF and checks the
packet geometry to see whether GRO was applied.

gro.sh provides a wrapper to run the gro.c in NIC loopback mode.
It is not included in continuous testing because it modifies network
configuration around a physical NIC: gro.sh sets the NIC in loopback
mode, creates macvlan devices on the physical device in separate
namespaces, and sends traffic generated by gro.c between the two
namespaces to observe coalescing behavior.

GRO coalescing is time sensitive.
Some tests may prove flaky on some hardware.

Note that this test suite tests for software GRO unless hardware GRO is
enabled (ethtool -K $DEV rx-gro-hw on).

To test, run ./gro.sh.
The wrapper will output success or failed test names, and generate
log.txt and stderr.

Sample log.txt result:
...
pure data packet of same size: Test succeeded

large data packets followed by a smaller one: Test succeeded

small data packets followed by a larger one: Test succeeded
...

Sample stderr result:
...
carrier ready
running test ipv4 data
Expected {200 }, Total 1 packets
Received {200 }, Total 1 packets.
...
Signed-off-by: NCoco Li <lixiaoyan@google.com>
Reviewed-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7d157501
  7. 21 7月, 2021 1 次提交
    • J
      selftests: net: Test for the IOAM insertion with IPv6 · 968691c7
      由 Justin Iurman 提交于 
      This test evaluates the IOAM insertion for IPv6 by checking the IOAM data
integrity on the receiver.

The topology is formed by 3 nodes: Alpha (sender), Beta (router in-between)
and Gamma (receiver). An IOAM domain is configured from Alpha to Gamma only,
which means not on the reverse path. When Gamma is the destination, Alpha
adds an IOAM option (Pre-allocated Trace) inside a Hop-by-hop and fills the
trace with its own IOAM data. Beta and Gamma also fill the trace. The IOAM
data integrity is checked on Gamma, by comparing with the pre-defined IOAM
configuration (see below).

    +-------------------+            +-------------------+
    |                   |            |                   |
    |    alpha netns    |            |    gamma netns    |
    |                   |            |                   |
    |  +-------------+  |            |  +-------------+  |
    |  |    veth0    |  |            |  |    veth0    |  |
    |  |  db01::2/64 |  |            |  |  db02::2/64 |  |
    |  +-------------+  |            |  +-------------+  |
    |         .         |            |         .         |
    +-------------------+            +-------------------+
              .                                .
              .                                .
              .                                .
    +----------------------------------------------------+
    |         .                                .         |
    |  +-------------+                  +-------------+  |
    |  |    veth0    |                  |    veth1    |  |
    |  |  db01::1/64 | ................ |  db02::1/64 |  |
    |  +-------------+                  +-------------+  |
    |                                                    |
    |                      beta netns                    |
    |                                                    |
    +--------------------------+-------------------------+

~~~~~~~~~~~~~~~~~~~~~~
| IOAM configuration |
~~~~~~~~~~~~~~~~~~~~~~

Alpha
+-----------------------------------------------------------+
| Type                | Value                               |
+-----------------------------------------------------------+
| Node ID             | 1                                   |
+-----------------------------------------------------------+
| Node Wide ID        | 11111111                            |
+-----------------------------------------------------------+
| Ingress ID          | 0xffff (default value)              |
+-----------------------------------------------------------+
| Ingress Wide ID     | 0xffffffff (default value)          |
+-----------------------------------------------------------+
| Egress ID           | 101                                 |
+-----------------------------------------------------------+
| Egress Wide ID      | 101101                              |
+-----------------------------------------------------------+
| Namespace Data      | 0xdeadbee0                          |
+-----------------------------------------------------------+
| Namespace Wide Data | 0xcafec0caf00dc0de                  |
+-----------------------------------------------------------+
| Schema ID           | 777                                 |
+-----------------------------------------------------------+
| Schema Data         | something that will be 4n-aligned   |
+-----------------------------------------------------------+

Note: When Gamma is the destination, Alpha adds an IOAM Pre-allocated Trace
      option inside a Hop-by-hop, where 164 bytes are pre-allocated for the
      trace, with 123 as the IOAM-Namespace and with 0xfff00200 as the trace
      type (= all available options at this time). As a result, and based on
      IOAM configurations here, only both Alpha and Beta should be capable of
      inserting their IOAM data while Gamma won't have enough space and will
      set the overflow bit.

Beta
+-----------------------------------------------------------+
| Type                | Value                               |
+-----------------------------------------------------------+
| Node ID             | 2                                   |
+-----------------------------------------------------------+
| Node Wide ID        | 22222222                            |
+-----------------------------------------------------------+
| Ingress ID          | 201                                 |
+-----------------------------------------------------------+
| Ingress Wide ID     | 201201                              |
+-----------------------------------------------------------+
| Egress ID           | 202                                 |
+-----------------------------------------------------------+
| Egress Wide ID      | 202202                              |
+-----------------------------------------------------------+
| Namespace Data      | 0xdeadbee1                          |
+-----------------------------------------------------------+
| Namespace Wide Data | 0xcafec0caf11dc0de                  |
+-----------------------------------------------------------+
| Schema ID           | 0xffffff (= None)                   |
+-----------------------------------------------------------+
| Schema Data         |                                     |
+-----------------------------------------------------------+

Gamma
+-----------------------------------------------------------+
| Type                | Value                               |
+-----------------------------------------------------------+
| Node ID             | 3                                   |
+-----------------------------------------------------------+
| Node Wide ID        | 33333333                            |
+-----------------------------------------------------------+
| Ingress ID          | 301                                 |
+-----------------------------------------------------------+
| Ingress Wide ID     | 301301                              |
+-----------------------------------------------------------+
| Egress ID           | 0xffff (default value)              |
+-----------------------------------------------------------+
| Egress Wide ID      | 0xffffffff (default value)          |
+-----------------------------------------------------------+
| Namespace Data      | 0xdeadbee2                          |
+-----------------------------------------------------------+
| Namespace Wide Data | 0xcafec0caf22dc0de                  |
+-----------------------------------------------------------+
| Schema ID           | 0xffffff (= None)                   |
+-----------------------------------------------------------+
| Schema Data         |                                     |
+-----------------------------------------------------------+
Signed-off-by: NJustin Iurman <justin.iurman@uliege.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      968691c7
  9. 25 6月, 2021 1 次提交
  11. 24 4月, 2021 1 次提交
  13. 12 4月, 2021 1 次提交
  15. 31 3月, 2021 1 次提交
  17. 27 1月, 2021 1 次提交
  19. 03 11月, 2020 1 次提交
  21. 15 10月, 2020 1 次提交
    • M
      selftests: Add VRF route leaking tests · 1a017276
      由 Michael Jeanson 提交于 
      The objective of the tests is to check that ICMP errors generated while
crossing between VRFs are properly routed back to the source host.

The first ttl test sends a ping with a ttl of 1 from h1 to h2 and parses the
output of the command to check that a ttl expired error is received.

The second ttl test runs traceroute from h1 to h2 and parses the output to
check for a hop on r1.

The mtu test sends a ping with a payload of 1450 from h1 to h2, through
r1 which has an interface with a mtu of 1400 and parses the output of the
command to check that a fragmentation needed error is received.

[ The IPv6 MTU test still fails with the symmetric routing setup. It
  appears to be caused by source address selection picking ::1.  Fixing
  this is beyond the scope of this series. ]
Signed-off-by: NMichael Jeanson <mjeanson@efficios.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      1a017276
  23. 01 10月, 2020 1 次提交
  25. 24 9月, 2020 1 次提交
    • D
      selftest/net/xfrm: Add test for ipsec tunnel · bc2652b7
      由 Dmitry Safonov 提交于 
      It's an exhaustive testing for ipsec: covering all encryption/
authentication/compression algorithms. The tests are run in two
network namespaces, connected by veth interfaces. To make exhaustive
testing less time-consuming, the tests are run in parallel tasks,
specified by parameter to the selftest.

As the patches set adds support for xfrm in compatible tasks, there are
tests to check structures that differ in size between 64-bit and 32-bit
applications.
The selftest doesn't use libnl so that it can be easily compiled as
compatible application and don't require compatible .so.

Here is a diagram of the selftest:

                           ---------------
                           |  selftest   |
                           |  (parent)   |
                           ---------------
                              |        |
                              | (pipe) |
                              ----------
                             /   |  |   \
               /-------------   /    \   -------------\
               |          /-----      -----\          |
      ---------|----------|----------------|----------|---------
      |   ---------   ---------        ---------   ---------   |
      |   | child |   | child |  NS A  | child |   | child |   |
      |   ---------   ---------        ---------   ---------   |
      -------|------------|----------------|-------------|------
           veth0        veth1            veth2         vethN
    ---------|------------|----------------|-------------|----------
    | ------------  ------------       ------------   ------------ |
    | | gr.child |  | gr.child | NS B  | gr.child |   | gr.child | |
    | ------------  ------------       ------------   ------------ |
    ----------------------------------------------------------------

The parent sends the description of a test (xfrm parameters) to the
child, the child and grand child setup a tunnel over veth interface and
test it by sending udp packets.

Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
      bc2652b7
  27. 10 7月, 2020 1 次提交
  29. 24 6月, 2020 1 次提交
    • T
      selftests/net: plug rxtimestamp test into kselftest framework · 0558c396
      由 tannerlove 提交于 
      Run rxtimestamp as part of TEST_PROGS. Analogous to other tests, add
new rxtimestamp.sh wrapper script, so that the test runs isolated
from background traffic in a private network namespace.

Also ignore failures of test case #6 by default. This case verifies
that a receive timestamp is not reported if timestamp reporting is
enabled for a socket, but generation is disabled. Receive timestamp
generation has to be enabled globally, as no associated socket is
known yet. A background process that enables rx timestamp generation
therefore causes a false positive. Ntpd is one example that does.

Add a "--strict" option to cause failure in the event that any test
case fails, including test #6. This is useful for environments that
are known to not have such background processes.

Tested:
make -C tools/testing/selftests TARGETS="net" run_tests
Signed-off-by: NTanner Love <tannerlove@google.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0558c396
  31. 23 4月, 2020 1 次提交
  33. 30 3月, 2020 1 次提交
  35. 26 3月, 2020 1 次提交
  37. 13 3月, 2020 1 次提交
  39. 14 2月, 2020 1 次提交
    • D
      selftests: use LDLIBS for libraries instead of LDFLAGS · 3e839363
      由 Dmitry Safonov 提交于 
      While building selftests, the following errors were observed:
> tools/testing/selftests/timens'
> gcc -Wall -Werror -pthread  -lrt -ldl  timens.c  -o tools/testing/selftests/timens/timens
> /usr/bin/ld: /tmp/ccGy5CST.o: in function `check_config_posix_timers':
> timens.c:(.text+0x65a): undefined reference to `timer_create'
> collect2: error: ld returned 1 exit status

Quoting commit 870f193d ("selftests: net: use LDLIBS instead of
LDFLAGS"):

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.

More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.

LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.

While at here, correct other selftests, not only timens ones.
Reported-by: NShuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NDmitry Safonov <dima@arista.com>
Tested-by: NShuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NShuah Khan <skhan@linuxfoundation.org>
      3e839363
  41. 03 2月, 2020 1 次提交
    • S
      selftests: net: Add FIN_ACK processing order related latency spike test · af8c8a45
      由 SeongJae Park 提交于 
      This commit adds a test for FIN_ACK process races related reconnection
latency spike issues.  The issue has described and solved by the
previous commit ("tcp: Reduce SYN resend delay if a suspicous ACK is
received").

The test program is configured with a server and a client process.  The
server creates and binds a socket to a port that dynamically allocated,
listen on it, and start a infinite loop.  Inside the loop, it accepts
connection, reads 4 bytes from the socket, and closes the connection.
The client is constructed as an infinite loop.  Inside the loop, it
creates a socket with LINGER and NODELAY option, connect to the server,
send 4 bytes data, try read some data from server.  After the read()
returns, it measure the latency from the beginning of this loop to this
point and if the latency is larger than 1 second (spike), print a
message.
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NSeongJae Park <sjpark@amazon.de>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      af8c8a45
  43. 07 11月, 2019 1 次提交
    • F
      selftest: net: add some traceroute tests · 3c28d99f
      由 Francesco Ruggeri 提交于 
      Added the following traceroute tests.

IPV6:
Verify that in this scenario

       ------------------------ N2
        |                    |
      ------              ------  N3  ----
      | R1 |              | R2 |------|H2|
      ------              ------      ----
        |                    |
       ------------------------ N1
                 |
                ----
                |H1|
                ----

where H1's default route goes through R1 and R1's default route goes
through R2 over N2, traceroute6 from H1 to H2 reports R2's address
on N2 and not N1.

IPV4:
Verify that traceroute from H1 to H2 shows 1.0.1.1 in this scenario

                   1.0.3.1/24
---- 1.0.1.3/24    1.0.1.1/24 ---- 1.0.2.1/24    1.0.2.4/24 ----
|H1|--------------------------|R1|--------------------------|H2|
----            N1            ----            N2            ----

where net.ipv4.icmp_errors_use_inbound_ifaddr is set on R1 and
1.0.3.1/24 and 1.0.1.1/24 are respectively R1's primary and secondary
address on N1.

v2: fixed some typos, and have bridge in R1 instead of R2 in IPV6 test.
Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3c28d99f
  45. 09 8月, 2019 1 次提交
  47. 04 8月, 2019 2 次提交
  49. 02 7月, 2019 1 次提交
  51. 31 5月, 2019 1 次提交
  53. 29 5月, 2019 1 次提交
  55. 25 5月, 2019 1 次提交
    • W
      selftests/net: SO_TXTIME with ETF and FQ · af5136f9
      由 Willem de Bruijn 提交于 
      The SO_TXTIME API enables packet tranmission with delayed delivery.
This is currently supported by the ETF and FQ packet schedulers.

Evaluate the interface with both schedulers. Install the scheduler
and send a variety of packets streams: without delay, with one
delayed packet, with multiple ordered delays and with reordering.
Verify that packets are released by the scheduler in expected order.

The ETF qdisc requires a timestamp in the future on every packet. It
needs a delay on the qdisc else the packet is dropped on dequeue for
having a delivery time in the past. The test value is experimentally
derived. ETF requires clock_id CLOCK_TAI. It checks this base and
drops for non-conformance.

The FQ qdisc expects clock_id CLOCK_MONOTONIC, the base used by TCP
as of commit fb420d5d ("tcp/fq: move back to CLOCK_MONOTONIC").
Within a flow there is an expecation of ordered delivery, as shown by
delivery times of test 4. The FQ qdisc does not require all packets to
have timestamps and does not drop for non-conformance.

The large (msec) delays are chosen to avoid flakiness.

	Output:

	SO_TXTIME ipv6 clock monotonic
	payload:a delay:28 expected:0 (us)

	SO_TXTIME ipv4 clock monotonic
	payload:a delay:38 expected:0 (us)

	SO_TXTIME ipv6 clock monotonic
	payload:a delay:40 expected:0 (us)

	SO_TXTIME ipv4 clock monotonic
	payload:a delay:33 expected:0 (us)

	SO_TXTIME ipv6 clock monotonic
	payload:a delay:10120 expected:10000 (us)

	SO_TXTIME ipv4 clock monotonic
	payload:a delay:10102 expected:10000 (us)

	[.. etc ..]

	OK. All tests passed

Changes v1->v2: update commit message output
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      af5136f9
  57. 28 1月, 2019 1 次提交
    • F
      selftests: net: use LDLIBS instead of LDFLAGS · 870f193d
      由 Fathi Boudra 提交于 
      reuseport_bpf_numa fails to build due to undefined reference errors:

 aarch64-linaro-linux-gcc
 --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall
 -Wl,--no-as-needed -O2 -g -I../../../../usr/include/  -Wl,-O1
 -Wl,--hash-style=gnu -Wl,--as-needed -lnuma  reuseport_bpf_numa.c
 -o
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa
 /tmp/ccfUuExT.o: In function `send_from_node':
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138:
 undefined reference to `numa_run_on_node'
 /tmp/ccfUuExT.o: In function `main':
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230:
 undefined reference to `numa_available'
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233:
 undefined reference to `numa_max_node'

It's GNU Make and linker specific.

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.

More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.

LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.

https://lkml.org/lkml/2010/2/10/362

tools/perf: libraries must come after objects

Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libnuma.
Signed-off-by: NFathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: NShuah Khan <shuah@kernel.org>
      870f193d
  59. 19 12月, 2018 1 次提交
  61. 15 12月, 2018 1 次提交
  63. 04 12月, 2018 1 次提交
  65. 25 11月, 2018 1 次提交
    • W
      selftests/net: add txring_overwrite · 358be656
      由 Willem de Bruijn 提交于 
      Packet sockets with PACKET_TX_RING send skbs with user data in frags.

Before commit 5cd8d46e ("packet: copy user buffers before orphan
or clone") ring slots could be released prematurely, possibly allowing
a process to overwrite data still in flight.

This test opens two packet sockets, one to send and one to read.
The sender has a tx ring of one slot. It sends two packets with
different payload, then reads both and verifies their payload.

Before the above commit, both receive calls return the same data as
the send calls use the same buffer. From the commit, the clone
needed for looping onto a packet socket triggers an skb_copy_ubufs
to create a private copy. The separate sends each arrive correctly.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      358be656
  67. 09 11月, 2018 1 次提交
  69. 08 11月, 2018 2 次提交
  71. 05 9月, 2018 1 次提交
  73. 30 8月, 2018 1 次提交