Makes the debug output much more useful.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SND_SOC_TPLG_INDEX_ALL is used by drivers to tell the core to load
all topology component indexes, not just the index in the header.
Fix this so that SND_SOC_TPLG_INDEX_ALL will load all components no matter
their index.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current topology only allows for widget configuration before the widget
is registered. This patch also allows further configuration and usage
after registration is complete.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Due to build errors revert commit c8597af8 (ASoC: topology: Allow
bespoke configuration post widget creation) until they can be fixed.
Signed-off-by: NMark Brown <broonie@kernel.org>

Template name pointers are copied when creating new widgets and are freed
in widget destroy.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Rewrite the message to be more meaningful.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current topology only allows for widget configuration before the widget
is registered. This patch also allows further configuration and usage
after registration is complete.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

OSS drivers are left as badly unmaintained, and now we're facing a
problem to clean up the hackish set_fs() usage in their codes.  Since
most of drivers have been covered by ALSA, and the others are dead old
and inactive, let's leave them RIP.

This patch is the first step: disable the build of OSS drivers.
We'll eventually drop the whole codes and clean up later.

Note that sound/oss/dmasound is still kept, since it's a completely
different implementation of OSS, and it doesn't suffer from set_fs()
hack.  Moreover, the build of ALSA is disabled on M68K by some reason,
thus disabling it shall result in a regression.  This one will be
disabled / removed once when we add the support in ALSA side.
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out
when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq())
causes hard lockup so unlock while waiting using jiffies.

---<-snip->---
<0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3
<4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem
<4>[ 1211.603053] irq event stamp: 13366
<4>[ 1211.603053] hardirqs last  enabled at (13365):
...
<4>[ 1211.603059] Call Trace:
<4>[ 1211.603059]  ? delay_tsc+0x3d/0xc0
<4>[ 1211.603059]  __delay+0xa/0x10
<4>[ 1211.603060]  __const_udelay+0x31/0x40
<4>[ 1211.603060]  snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core]
<4>[ 1211.603060]  ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel]
<4>[ 1211.603061]  snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core]
<4>[ 1211.603061]  azx_stop_chip+0x9/0x10 [snd_hda_codec]
<4>[ 1211.603061]  azx_suspend+0x72/0x220 [snd_hda_intel]
<4>[ 1211.603061]  pci_pm_suspend+0x71/0x140
<4>[ 1211.603062]  dpm_run_callback+0x6f/0x330
<4>[ 1211.603062]  ? pci_pm_freeze+0xe0/0xe0
<4>[ 1211.603062]  __device_suspend+0xf9/0x370
<4>[ 1211.603062]  ? dpm_watchdog_set+0x60/0x60
<4>[ 1211.603063]  async_suspend+0x1a/0x90
<4>[ 1211.603063]  async_run_entry_fn+0x34/0x160
<4>[ 1211.603063]  process_one_work+0x1f4/0x6d0
<4>[ 1211.603063]  ? process_one_work+0x16e/0x6d0
<4>[ 1211.603064]  worker_thread+0x49/0x4a0
<4>[ 1211.603064]  kthread+0x107/0x140
<4>[ 1211.603064]  ? process_one_work+0x6d0/0x6d0
<4>[ 1211.603065]  ? kthread_create_on_node+0x40/0x40
<4>[ 1211.603065]  ret_from_fork+0x2e/0x40

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419
Fixes: 38b19ed7 ("ALSA: hda: fix to wait for RIRB & CORB DMA to set")
Reported-by: NMarta Lofstedt <marta.lofstedt@intel.com>
Suggested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
CC: stable <stable@vger.kernel.org> # 4.7
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

set_memory_* functions have moved to set_memory.h.  Switch to this
explicitly.

Link: http://lkml.kernel.org/r/1488920133-27229-14-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This typo is quite common.  Fix it and add it to the spelling file so
that checkpatch catches it earlier.

Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.orgSigned-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NFlorin Tudorache <florin_tudorache@live.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Bitclk is derived from sysclk using bclk_divs.
Sysclk can be derived in two ways:
	(1) directly from MLCK
	(2) MCLK via PLL

Commit 3c01b9ee ("ASoC: codec: wm8960: Relax bit clock
computation")
relaxed bitclk computation when sysclk is directly derived from MCLK.

Lets do the same thing when sysclk is derived via PLL.
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The new PLL configuration code triggers a harmless warning:

sound/soc/codecs/wm8960.c: In function 'wm8960_configure_clocking':
sound/soc/codecs/wm8960.c:735:3: error: 'best_freq_out' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
   wm8960_set_pll(codec, freq_in, best_freq_out);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/wm8960.c:699:12: note: 'best_freq_out' was declared
here

Fix this by reworking the code such that:

1) When there is no PLL freq available return -EINVAL and make
sure *bclk_idx, *dac_idx, *sysclk_idx are initialized with
invalid values.

2) When there is a PLL freq available initialize *bclk_idx,
*dac_idx and *sysclk_idx with correct values and immediately
return the freq available.

Fixes: 84fdc00d ("ASoC: codec: wm9860: Refactor PLL out freq search")
Fixes: 303e8954 ("ASoC: codec: wm8960: Stop when a matching PLL freq is found")
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Remove initial configuration of Class D gain for 1R and 2L.
Leave them at the chip default.
Signed-off-by: NJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: NJohn Hsu <supercraig0719@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Rename the name of kcontrols to match up the DAPM
widget controls.
Signed-off-by: NJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: NJohn Hsu <supercraig0719@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

skl_tplg_add_pipe() returned EEXIST instead of negative EEXIST, so fix that
and handle the return value as well.
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NMark Brown <broonie@kernel.org>

With compiler option W=1, we have one more warning in the driver for
'set but unused variable', so remove the unused variable to fix it.

sound/soc/intel/skylake/skl-pcm.c: In function ‘skl_platform_open’:
sound/soc/intel/skylake/skl-pcm.c:954:26: warning: variable ‘runtime’ set but not used [-Wunused-but-set-variable]
  struct snd_pcm_runtime *runtime;
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NMark Brown <broonie@kernel.org>

The error handling in bxt_sst_dsp_init() got changed in a way that
it now derefences an uninitialized pointer when printing a warning
about the device not being found:

sound/soc/intel/skylake/bxt-sst.c: In function 'bxt_sst_dsp_init':
sound/soc/intel/skylake/bxt-sst.c:567:14: error: 'skl' may be used uninitialized in this function [-Werror=maybe-uninitialized]

As we do have a valid device pointer available at the call site,
let's use that instead.

Fixes: 9fe9c711 ("ASoC: Intel: Skylake: Move sst common initialization to a helper function")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NMark Brown <broonie@kernel.org>

We intended to return here.  The current code has a static checker
warning because we set "ret" but don't use it.

Fixes: 76c2145d ("ASoC: sti: Add CPU DAI driver for playback")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NArnaud POULIQUEN <arnaud.pouliquen@st.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

During reset "refactoring" the output configuration was lost.
This commit repairs sound on EDB93XX boards.

Fixes: 9a397f47 ("ASoC: cs4271: add regulator consumer support")
Signed-off-by: NAlexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 4.6+

Designware PCM is an extension to Designware I2S and they are dependent
on each other. For this reason, make Designware PCM a boolean which will
compile with Desigwnare I2S module. The name of the module is not changed
but the name of the files need to be changed.

Also, without this commit we get errors when probbing designware_i2s module
because of unspecified license:

designware_pcm: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
designware_pcm: Unknown symbol __rcu_read_lock (err 0)
designware_pcm: Unknown symbol devm_snd_soc_register_platform (err 0)
designware_pcm: Unknown symbol synchronize_rcu (err 0)
designware_pcm: Unknown symbol __rcu_read_unlock (err 0)
designware_pcm: Unknown symbol snd_soc_set_runtime_hwparams (err 0)

So, this is really needed as a fix.

Fixes: 79361b2b ("ASoC: dwc: Add PIO PCM extension")
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

trivial fix to spelling mistake in dev_warn message,
"ali_capture_preapre" should be "ali_capture_prepare"
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch implements SAI ASoC driver for STM32.
Signed-off-by: Nolivier moysan <olivier.moysan@st.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Kabylake platform expects modules in a library manifest. After loading
base firmware library manifest is loaded using load library IPC. This is
followed by module load using load multiple modules IPC.
Signed-off-by: NSodhi, VunnyX <vunnyx.sodhi@intel.com>
Signed-off-by: NG Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Kabylake uses code loader dma and wait on notification instead of ipc
reply for load library ipc status. So modify the argument of
skl_sst_ipc_load_library to check on flag to wait for ipc reply.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For audio kabylake is same as skylake except the module load approach.
This patch registers different dsp_fw_ops for kabylake and next patch
adds the module load support for kabylake.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Kabylake also uses code loader dma for module load and library load.
skl_transfer_module can be reused. Modify the arguments to include
library index to be passed to lib load ipc and module/lib check to use
correct ipc for lib/module load.
Signed-off-by: NG Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

request firmware, strip extended manifest and release library changes
are common to kabylake and APL.

So move these common code to utils to be reused in later patches for
kabylake library load.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some skl sst context are not dependent of platform and initializing them
independently for each platform can lead to errors. So optimize by
moving them to a helper function and platform specific init code can
call this.
Signed-off-by: NG Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add driver for NAU88L24.
Signed-off-by: NJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: NJohn Hsu <supercraig0719@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Lenovo P520/420 build with two codecs.
ALC233 for front panel.
ALC662 for rear panel.
This patch will rename capture name for slove conflicts.
And create a card longname for UCM profile.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

tas2552_suspend() and tas2552_resume() currently always return success,
even though they may fail.

Fix this behaviour by always propagating the error code.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: NDan Murphy <dmurphy@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Now that quirks can be overridden with a module parameter,
log errors so that non-sensical quirks introduced by mistake
are identified.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The previous patch for adding the quirk module option had a typo in
its info print, which results in a weird output.  Also, the parameter
type should be rather unsigned int instead of signed int.

Fixes: 9f2cf73e ("ASoC: bytcr_rt5640: Allow quirk set via module option")
Reported-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry
the ignore_suspend flag, and this prevents the suspend/resume working
properly while the stream is running, since SST core code has the
check of the running streams and returns -EBUSY.  Drop these
superfluous flags for fixing the behavior.

Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE
definitions, which leads to the kernel Oops at suspend/resume like:

  BUG: scheduling while atomic: systemd-sleep/3144/0x00000003
  Call Trace:
   dump_stack+0x5c/0x7a
   __schedule_bug+0x55/0x70
   __schedule+0x63c/0x8c0
   schedule+0x3d/0x90
   schedule_timeout+0x16b/0x320
   ? del_timer_sync+0x50/0x50
   ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core]
   ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core]
   ? remove_wait_queue+0x60/0x60
   ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core]
   ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core]
   ....

This patch addresses these appropriately, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # v4.1+

Trivial fix to spelling mistake in dev_err message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The bytcr-rt5640 driver has a few quirk setups depending on the board,
where the quirk value is set by DMI matching.  When you have a new
device to add the support, you often experience to try the different
quirk by trial-and-error.  Or, you may have a development model that
still has no proper DMI string.  In either case, you'd need to compile
the driver at each time.

This patch introduces a module option to override the quirk value on
the fly.  User can boot like snd-soc-sst-bytcr-rt5640.quirk=0x4004 to
override the default value without recompilation.  It's a raw value,
so user needs to check the source code for the meaning of each bit.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Since recently UCM can pick up a configuration specific to the board
via card longname field, and we introduced a helper function
snd_soc_set_dmi_name() for that.  So far, it was used only in one
place (sound/soc/intel/boards/broadwell.c), but it should be more
widely applied.

This patch puts a big hammer for that: it lets snd_soc_register_card()
calling snd_soc_set_dmi_name() unconditionally, so that all x86
devices get the better longname string.  This would have no impact for
other systems without DMI support, as snd_soc_set_dmi_name() is no-op
on them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For systems without DMI, it makes no sense to have the code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>