mainline inclusion
from mainline-master
commit 19a39831
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=19a39831ff99f88ea8d01a2b6716084f14752529

------------------------------------------------------------------------

Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.

Context analysis:

  - sas_enable_revalidation(): process, acquires mutex
  - sas_resume_ha(): process, calls wait_event_timeout()

Link: https://lore.kernel.org/r/20210118100955.1761652-9-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NAhmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 3997e0fd
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3997e0fdd5878a7d6224056176800c1db538f468

------------------------------------------------------------------------

Now that the driver always uses managed interrupts, delete
auto_affine_msi_experimental module param.

Link: https://lore.kernel.org/r/1609763622-34119-2-git-send-email-john.garry@huawei.comSigned-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 74a29219
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=74a2921948ed8c0e7f079a98442ec3493168cc85

------------------------------------------------------------------------

As a performance enhancement, make the completion queue interrupts managed.

In addition, in commit bf0beec0 ("blk-mq: drain I/O when all CPUs in a
hctx are offline"), CPU hotplug for MQ devices using managed interrupts is
made safe. So expose HW queues to blk-mq to take advantage of this.

Flag Scsi_host.host_tagset is also set to ensure that the HBA is not sent
more commands than it can handle. However the driver still does not use
request tag for IPTT as there are many HW bugs means that special rules
apply for IPTT allocation.

Link: https://lore.kernel.org/r/1606905417-183214-6-git-send-email-john.garry@huawei.comSigned-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit e15f2fa9
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e15f2fa959f2cce8a05e8e3a596e75d068cd42c5

------------------------------------------------------------------------

Drivers for multi-queue platform devices may also want managed interrupts
for handling HW queue completion interrupts, so add support.

The function accepts an affinity descriptor pointer, which covers all IRQs
expected for the device.

The function is devm class as the only current in-tree user will also use
devm method for requesting the interrupts; as such, the function is made
as devm as it can ensure ordering of freeing the irq and disposing of the
mapping.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1606905417-183214-5-git-send-email-john.garry@huawei.comReviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1c3f69b4
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1c3f69b4543af0aad514c127298e5ea40392575d

------------------------------------------------------------------------

The functionality of acpi_dev_irqresource_disabled() is same as in common
irqresource_disabled(), so drop acpi_dev_irqresource_disabled() in favour
of that function.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1606905417-183214-4-git-send-email-john.garry@huawei.comReviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 9806731d
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9806731db684a475ade1e95d166089b9edbd9da3
------------------------------------------------------------------------

Add a common function to set the fields for a irq resource to disabled,
which mimics what is done in acpi_dev_irqresource_disabled(), with a view
to replace that function.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1606905417-183214-3-git-send-email-john.garry@huawei.comReviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1d3aec89
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1d3aec89286254487df7641c30f1b14ad1d127a5
------------------------------------------------------------------------

Add a function to allow the affinity of an interrupt be switched to
managed, such that interrupts allocated for platform devices may be
managed.

This new interface has certain limitations, and attempts to use it in the
following circumstances will fail:
- For when the kernel is configured for generic IRQ reservation mode (in
  config GENERIC_IRQ_RESERVATION_MODE). The reason being that it could
  conflict with managed vs. non-managed interrupt accounting.
- The interrupt is already started, which should not be the case during
  init
- The interrupt is already configured as managed, which means double init
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1606905417-183214-2-git-send-email-john.garry@huawei.comReviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 60f7c503
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=60f7c503d971a731ee3c4f884a9f2e80d476730d

------------------------------------------------------------------------

Fix some spelling mistakes in comments:
	udpate ==> update
	succesful ==> successful
	exmaple ==> example
	unneccessary ==> unnecessary
	stoping ==> stopping
	uknown ==> unknown

Link: https://lkml.kernel.org/r/20201127011747.86005-1-shihaitao1@huawei.comSigned-off-by: NHaitao Shi <shihaitao1@huawei.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Reviewed-by: NSouptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 18577cdc
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18577cdcaeeb7a1ca5c3adc4d92ed2ba75699625

------------------------------------------------------------------------

hisi_sas_task_exec() uses preemptible() to see if it's safe to block.  This
does not work for CONFIG_PREEMPT_COUNT=n kernels in which preemptible()
always returns 0.

The problem is masked when enabling some of the common Kconfig.debug
options (like CONFIG_DEBUG_ATOMIC_SLEEP), as they implicitly enable the
preemption counter.

In general, driver leaf functions should not make logic decisions based on
the context they're called from. The caller should be the entity
responsible for explicitly indicating context.

Since hisi_sas_task_exec() already has a gfp_t flags parameter, use it as
the explicit context marker.

Link: https://lore.kernel.org/r/20201126132952.2287996-3-bigeasy@linutronix.de
Fixes: 214e702d ("scsi: hisi_sas: Adjust task reject period during host reset")
Fixes: 550c0d89 ("scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec()")
Cc: Xiaofei Tan <tanxiaofei@huawei.com>
Cc: Xiang Chen <chenxiang66@hisilicon.com>
Cc: John Garry <john.garry@huawei.com>
Acked-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NAhmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 623a4b6d
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=623a4b6d5c2a7595f677fa17348dbca6b461f16a

------------------------------------------------------------------------

Relocate all the debugfs code for DFX to v3 hw since no other versions
support it.

Link: https://lore.kernel.org/r/1606207594-196362-4-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit bec99e52
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bec99e5250bfe1c575e72a971bc2b2b21cf6c8b4

------------------------------------------------------------------------

Sometimes local functions are called indirectly from the hw driver, which
only makes the code harder to follow. Remove these.

Method .hw_init is only called from platform driver probe, which is not
relevant, so don't set this either.

Link: https://lore.kernel.org/r/1606207594-196362-2-git-send-email-john.garry@huawei.comSigned-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 71c8f15e
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=71c8f15e1dbcd202f0b27d7560ce191c5a3b7286

------------------------------------------------------------------------

Both runtime_suspend_v3_hw() and runtime_resume_v3_hw() do nothing else but
invoke suspend_v3_hw() and resume_v3_hw() respectively. This is the case of
unnecessary function calls. To use those functions for runtime pm as well,
simply use UNIVERSAL_DEV_PM_OPS.

make -j$(nproc) W=1, with CONFIG_PM disabled, throws '-Wunused-function'
warning for runtime_suspend_v3_hw() and runtime_resume_v3_hw(). After
dropping those function definitions, the warning was thrown for
suspend_v3_hw() and resume_v3_hw(). Hence, mark them as '__maybe_unused'.

Link: https://lore.kernel.org/r/20201102164730.324035-15-vaibhavgupta40@gmail.comSigned-off-by: NVaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 027e508a
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=027e508aea458719390eb6a83a297940e8ae79f1

------------------------------------------------------------------------

Drivers using new-framework/generic-framework should not handle standard
power management operations. These operations were performed by legacy
framework through PCI helper functions like pci_save/restore_state(),
pci_set_power_state(), etc.

Drivers should not use them now.

Link: https://lore.kernel.org/r/20201102164730.324035-14-vaibhavgupta40@gmail.comSigned-off-by: NVaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 17b5e4d1
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=17b5e4d14837b1f16d583cb66810d8f915ffbfd8

------------------------------------------------------------------------

The driver calls pci_enable_wake(...., false) in hisi_sas_v3_resume(), and
there is no corresponding pci_enable_wake(...., true) in
hisi_sas_v3_suspend(). Either it should do enable-wake the device in
.suspend() or should not invoke pci_enable_wake() at all.

Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
hisi_sas_v3_resume().

Link: https://lore.kernel.org/r/20201102164730.324035-13-vaibhavgupta40@gmail.comSigned-off-by: NVaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.14-rc1
commit ccb5ecdc
category: bugfix
bugzilla: 168583
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ccb5ecdc2ddeaff744ee075b54cdff8a689e8fa7

----------------------------------------------------------------------

Before commit 8fcc4ae6 ("arm64: acpi: Make apei_claim_sea()
synchronise with APEI's irq work"), do_sea() would unconditionally
signal the affected task from the arch code. Since that change,
the GHES driver sends the signals.

This exposes a problem as errors the GHES driver doesn't understand
or doesn't handle effectively are silently ignored. It will cause
the errors get taken again, and circulate endlessly. User-space task
get stuck in this loop.

Existing firmware on Kunpeng9xx systems reports cache errors with the
'ARM Processor Error' CPER records.

Do memory failure handling for ARM Processor Error Section just like
for Memory Error Section.

Fixes: 8fcc4ae6 ("arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work")
Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: NJames Morse <james.morse@arm.com>
[ rjw: Subject edit ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: 31369

-----------------------------------------------

This reverts commit ec02feff.
Following patche mainline has fixed this issue:
0188b878 ("kretprobe: Avoid re-registration of the same kretprobe earlier")
Signed-off-by: NWang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: NJian Cheng <cj.chengjian@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainine inclusion
from mainline-v5.12-rc7
d62fbdb9
category: feature
bugzilla: 175140
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d62fbdb99a85730af408399bfae9fa2aa708c6f1

---------------------------

Add HiSilicon I2C controller driver for the Kunpeng SoC. It provides
the access to the i2c busses, which connects to the eeprom, rtc, etc.

The driver works with IRQ mode, and supports basic I2C features and 10bit
address. The DMA is not supported.
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NYicong Yang <yangyicong@hisilicon.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Reviewed-by: NJay Fang <f.fangjian@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc7
3b4c747c
category: feature
bugzilla: 175140
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3b4c747cd32078172dd238929e38a43cfed83580

---------------------------

Some I2C drivers like Designware and HiSilicon will print the
bus frequency mode information, so add a public one that everyone
can make use of.

Add the definition of the I2C Frequency Modes macro.
Tested-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYicong Yang <yangyicong@hisilicon.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Reviewed-by: NJay Fang <f.fangjian@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc7
07740c92
category: feature
bugzilla: 175140
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=07740c92ae57ca21204f1e0c6f59272cdf3190cc

---------------------------

Some I2C controller drivers will only unregister the I2C
adapter in their .remove() callback, which can be done
by simply using a managed variant to add the I2C adapter.

So add the managed functions for adding the I2C adapter.
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NYicong Yang <yangyicong@hisilicon.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Reviewed-by: NJay Fang <f.fangjian@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc3
commit 4ebd3aec
category: bugfix
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4ebd3aec3842662300979dacd6fb38e3e8edf7f4

------------------------------------------------------------------------

clear_buffer_new() is used to clear buffer new stat.  When PAGE_SIZE is
64K, most buffer heads in the list are not needed to clear.
clear_buffer_new() has an enpensive atomic modification operation, Let's
add checking buffer head before clear it as __block_write_begin_int does
which is good for performance.

Link: https://lkml.kernel.org/r/1612332890-57918-1-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NYang Guo <guoyang2@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc3
commit abd3ac79
category: bugfix
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=abd3ac7902fb77f8386f485f7284253fc0c4d803

------------------------------------------------------------------------

For Armv8.6, The frequency of CNTFRQ_EL0 is standardized to a
frequency of 1GHz, so Arm Base System Architecture 1.0[1] has
introduced watchdog revision 1 that increases the length the
watchdog offset register to 48 bit, while other operation of
the watchdog remains the same.

The driver can determine which version of the watchdog is
implemented through the watchdog interface identification
register (W_IID). If the version is 0x1, the watchdog
offset register will be 48 bit, otherwise it will be 32 bit.

[1] https://developer.arm.com/documentation/den0094/latest

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Al Stone <al.stone@linaro.org>
Cc: Jianchao Hu <hujianchao@hisilicon.com>
Cc: Huiqiang Wang <wanghuiqiang@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1621253408-23401-1-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@linux-watchdog.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc3
commit 4c1daba1
category: bugfix
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4c1daba15c209b99d192f147fea3dade30f72ed2

------------------------------------------------------------------------

With global filtering, we only allow an event to be scheduled if its
filter settings exactly match those of any existing events, therefore
it is pointless to reapply the filter in that case. Much worse, though,
is that in doing that we trample the event type of counter 0 if it's
already active, and never touch the appropriate PMEVTYPERn so the new
event is likely not counting the right thing either. Don't do that.

CC: stable@vger.kernel.org
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/32c80c0e46237f49ad8da0c9f8864e13c4a803aa.1623153312.git.robin.murphy@arm.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc3
commit 3c1f2eb5
category: bugfix
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3c1f2eb5475a4031d9555a38de2467d80019c66a

------------------------------------------------------------------------

request_irq() after setting IRQ_NOAUTOEN as below
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
can be replaced by request_irq() with IRQF_NO_AUTOEN flag.

this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which
is being merged: https://lore.kernel.org/patchwork/patch/1388765/Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1622595642-61678-2-git-send-email-tiantao6@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc2
commit cbe16f35
category: bugfix
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cbe16f35bee6880becca6f20d2ebf6b457148552

------------------------------------------------------------------------

Many drivers don't want interrupts enabled automatically via request_irq().
So they are handling this issue by either way of the below two:

(1)
  irq_set_status_flags(irq, IRQ_NOAUTOEN);
  request_irq(dev, irq...);

(2)
  request_irq(dev, irq...);
  disable_irq(irq);

The code in the second way is silly and unsafe. In the small time gap
between request_irq() and disable_irq(), interrupts can still come.

The code in the first way is safe though it's subobtimal.

Add a new IRQF_NO_AUTOEN flag which can be handed in by drivers to
request_irq() and request_nmi(). It prevents the automatic enabling of the
requested interrupt/nmi in the same safe way as #1 above. With that the
various usage sites of #1 and #2 above can be simplified and corrected.
Signed-off-by: NBarry Song <song.bao.hua@hisilicon.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: dmitry.torokhov@gmail.com
Link: https://lore.kernel.org/r/20210302224916.13980-2-song.bao.hua@hisilicon.comReviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc3
commit 814be609
category: bugfix
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=814be609baae62aaa6c02fa6f3ad66cff32a6d15

------------------------------------------------------------------------

'Data source' is a new function for HHA PMU and config / clear
interface was wrong by mistake. 'HHA_DATSRC_CTRL' register is
mainly used for data source configuration, if we enable bit0
as driver, it will go on count the event and we didn't check
it carefully. So fix the issue and do as the initial purpose.

Fixes: 932f6a99 ("drivers/perf: hisi: Add new functions for HHA PMU")
Reported-by: Nkernel test robot <lkp@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1622709291-37996-1-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc3
commit 77b06ddc
category: bugfix
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=77b06ddc04354293f746d0434f00700110d3392d

------------------------------------------------------------------------

These drivers use irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.

Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.

Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.

Replace the mindless abuse with irq_set_affinity().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: NMark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.813375875@linutronix.deSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc3
commit 26210545
category: bugfix
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2621054535955fb78ea96b76b279eb481f40fcef

------------------------------------------------------------------------

The driver uses irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.

Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.

Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.

Replace the mindless abuse with irq_set_affinity().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: NMark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.603636289@linutronix.deSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc3
commit 4d80d6ca
category: bugfix
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4d80d6ca5d77fde9880da8466e5b64f250e5bf82

------------------------------------------------------------------------

Perf modules abuse irq_set_affinity_hint() to set the affinity of system
PMU interrupts just because irq_set_affinity() was not exported.

The fact that irq_set_affinity_hint() actually sets the affinity is a
non-documented side effect and the name is clearly saying it's a hint.

To clean this up, export the real affinity setter.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093117.968251441@linutronix.deReviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc3
commit a0ab25cd
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a0ab25cd82eeb68bfa19a4d93a097521af5011b8

------------------------------------------------------------------------

On HiSilicon Hip09 platform, there is a PA (Protocol Adapter) module on
each chip SICL (Super I/O Cluster) which incorporates three Hydra interface
and facilitates the cache coherency between the dies on the chip. While PA
uncore PMU model is the same as other Hip09 PMU modules and many PMU events
are supported. Let's support the PMU driver using the HiSilicon uncore PMU
framework.

PA PMU supports the following filter functions:
* tracetag_en: allows user to count events according to tt_req or
tt_core set in L3C PMU. It's the same as other PMUs.

* srcid_cmd & srcid_msk: allows user to filter statistics that come from
specific CCL/ICL by configuration source ID.

* tgtid_cmd & tgtid_msk: it is the similar function to srcid_cmd &
srcid_msk. Both are used to check where the data comes from or go to.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Co-developed-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-9-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc3
commit 3bf30882
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3bf30882c3c7b6e376d9d6d04082c9aa2d2ac30a

------------------------------------------------------------------------

HiSilicon's Hip09 is comprised by multi-dies that can be connected by SLLC
module (Skyros Link Layer Controller), its has separate PMU registers which
the driver can program it freely and interrupt is supported to handle
counter overflow. Let's support its driver under the framework of HiSilicon
uncore PMU driver.

SLLC PMU supports the following filter functions:
* tracetag_en: allows user to count data according to tt_req or
tt_core set in L3C PMU.

* srcid_cmd & srcid_msk: allows user to filter statistics that come from
specific CCL/ICL by configuration source ID.

* tgtid_hi & tgtid_lo: it also supports event statistics that these
operations will go to the CCL/ICL by configuration target ID or
target ID range. It's the same as source ID with 11-bit width in
the SoC. More introduction is added in documentation:
Documentation/admin-guide/perf/hisi-pmu.rst

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Co-developed-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-8-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc3
commit cce03e70
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cce03e702c9f26a43b16c51bf03029911feab692

------------------------------------------------------------------------

DDRC PMU's events are useful for performance profiling, but the events
are limited and counter is fixed. On HiSilicon Hip09 platform, PMU
counters are the programmable and more events are supported. Let's
add the DDRC PMU v2 driver.

Bandwidth events are exposed directly in driver and some more events
will listed in JSON file later.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Co-developed-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-7-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc3
commit 932f6a99
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=932f6a99f9b0c6b7039a5e2ce961009a8dc8c07c

------------------------------------------------------------------------

On HiSilicon Hip09 platform, some new functions are also supported on
HHA PMU.

* tracetag_en: it is the abbreviation of tracetag enable and allows user
to count events according to tt_req or tt_core set in L3C PMU.

* datasrc_skt: it is the abbreviation of data source from another
socket and it is used in the multi-chips. It's the same as L3C PMU.

* srcid_cmd & srcid_msk: pair of the fields are used to filter
statistics that come from the specific CCL/ICL by the configuration.
These are the abbreviation of source ID command and mask. The source
ID is 11-bit and detailed descriptions are documented in
Documentation/admin-guide/perf/hisi-pmu.rst.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Co-developed-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-6-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc3
commit 486a7f46
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=486a7f46b966a825484808d4edf53bbe02698fb3

------------------------------------------------------------------------

On HiSilicon Hip09 platform, some new functions are enhanced on L3C PMU:

* tt_req: it is the abbreviation of tracetag request and allows user to
count only read/write/atomic operations. tt_req is 3-bit and details are
listed in the hisi-pmu document.
$# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5

* tt_core: it is the abbreviation of tracetag core and allows user to
filter by core/thread within the cluster, it is a 8-bit bitmap that each
bit represents the corresponding core/thread in this L3C.
$# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0xf/ sleep 5

* datasrc_cfg: it is the abbreviation of data source configuration and
allows user to check where the data comes from, such as: from local DDR,
cross-die DDR or cross-socket DDR. Its is 5-bit and represents different
data source in the SoC.
$# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0xe/ sleep 5

* datasrc_skt: it is the abbreviation of data source from another socket
and is used in the multi-chips, if user wants to check the cross-socket
datat source, it shall be added in perf command. Only one bit is used to
control this.
$# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0x10,datasrc_skt=1/ sleep 5

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Co-developed-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-5-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc3
commit 3da582df
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3da582df575c3b2910e09e0445c27c3ebc8096e5

------------------------------------------------------------------------

For HiSilicon uncore PMU, more versions are supported and some variables
shall be added suffix to distinguish the version which are prepared for
the new drivers.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Co-developed-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-4-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc3
commit baff06c3
category: cleanup
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=baff06c315a146a6943b4fcabb4fe4fa36167413

------------------------------------------------------------------------

On HiSilicon uncore PMU drivers, interrupt handling function and interrupt
registration function are very similar in differents PMU modules. Let's
refactor the frame.

Two new callbacks are added for the HW accessors:

* hisi_uncore_ops::get_int_status returns a bitmap of events which
  have overflowed and raised an interrupt

* hisi_uncore_ops::clear_int_status clears the overflow status for a
  specific event

These callback functions are used by a common IRQ handler,
hisi_uncore_pmu_isr().

One more function hisi_uncore_pmu_init_irq() is added to replace each
PMU initialization IRQ interface and simplify the code.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Co-developed-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-3-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc3
commit 4e4cb8ca
category: cleanup
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4e4cb8ca48bd68c00df67c10ff867016abb7391f

------------------------------------------------------------------------

The sanity check for counter index has been done in the function
hisi_uncore_pmu_get_event_idx, so remove the redundant interface
hisi_uncore_pmu_counter_valid() and sanity check.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-2-git-send-email-zhangshaokun@hisilicon.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit 34eb9359
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=34eb9359c111fd17ef8fb1ba671102438a7810c6

------------------------------------------------------------------------

The ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3_PMU was added with the idea
that a SMMUv3 PMCG would only exist on a system with an associated SMMUv3.

However it is not the job of Kconfig to make these sorts of decisions (even
if it were true), so remove the dependency.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1612175042-56866-1-git-send-email-john.garry@huawei.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc4
commit 4a669e24
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4a669e2432fce9c01522a8453460e89f877dccd4

------------------------------------------------------------------------

Armv8.3 extends the SPE by adding:
- Alignment field in the Events packet, and filtering on this event
  using PMSEVFR_EL1.
- Support for the Scalable Vector Extension (SVE).

The main additions for SVE are:
- Recording the vector length for SVE operations in the Operation Type
  packet. It is not possible to filter on vector length.
- Incomplete predicate and empty predicate fields in the Events packet,
  and filtering on these events using PMSEVFR_EL1.

Update the check of pmsevfr for empty/partial predicated SVE and
alignment event in SPE driver.
Signed-off-by: NWei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20201203141609.14148-1-liwei391@huawei.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.10-rc3
commit 2c255223
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2c255223362e9747075320ba618bd5960b76e04f

------------------------------------------------------------------------

SMMU_PMCG_IIDR was added in the SMMUv3.3 spec.

For the perf tool to know the specific HW implementation, expose the
PMCG_IIDR contents only when set.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1602149181-237415-5-git-send-email-john.garry@huawei.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.10-rc3
commit ac4511c9
category: feature
bugzilla: 175148
CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ac4511c9364c9a6390e8585cdd4596103bca16eb

------------------------------------------------------------------------

To allow userspace to identify the specific implementation of the device,
add an "identifier" sysfs file.

Encoding is as follows (same for all uncore drivers):
hi1620: 0x0
hi1630: 0x30
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1602149181-237415-2-git-send-email-john.garry@huawei.comSigned-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>