Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 20 11月, 2020 2 次提交
    • O
      can: gw: support modification of Classical CAN DLCs · 94c23097
      由 Oliver Hartkopp 提交于 
      Add support for data length code modifications for Classical CAN.

The netlink configuration interface always allowed to pass any value
that fits into a byte, therefore only the modification process had to be
extended to handle the raw DLC represenation of Classical CAN frames.

When a DLC value from 0 .. F is provided for Classical CAN frame
modifications the 'len' value is modified as-is with the exception that
potentially existing 9 .. F DLC values in the len8_dlc element are moved
to the 'len' element for the modification operation by mod_retrieve_ccdlc().

After the modification the Classical CAN frame DLC information is brought
back into the correct format by mod_store_ccdlc() which is filling 'len'
and 'len8_dlc' accordingly.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201119084921.2621-1-socketcan@hartkopp.netSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
      94c23097
    • O
      can: add optional DLC element to Classical CAN frame structure · ea780056
      由 Oliver Hartkopp 提交于 
      ISO 11898-1 Chapter 8.4.2.3 defines a 4 bit data length code (DLC) table which
maps the DLC to the payload length of the CAN frame in bytes:

    DLC      ->  payload length
    0 .. 8   ->  0 .. 8
    9 .. 15  ->  8

Although the DLC values 8 .. 15 in Classical CAN always result in a payload
length of 8 bytes these DLC values are transparently transmitted on the CAN
bus. As the struct can_frame only provides a 'len' element (formerly 'can_dlc')
which contains the plain payload length ( 0 .. 8 ) of the CAN frame, the raw
DLC is not visible to the application programmer, e.g. for testing use-cases.

To access the raw DLC values 9 .. 15 the len8_dlc element is introduced, which
is only valid when the payload length 'len' is 8 and the DLC is greater than 8.

The len8_dlc element is filled by the CAN interface driver and used for CAN
frame creation by the CAN driver when the CAN_CTRLMODE_CC_LEN8_DLC flag is
supported by the driver and enabled via netlink configuration interface.
Reported-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201110101852.1973-2-socketcan@hartkopp.netSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
      ea780056
  3. 18 11月, 2020 1 次提交
    • X
      net: wan: Delete the DLCI / SDLA drivers · f7365919
      由 Xie He 提交于 
      The DLCI driver (dlci.c) implements the Frame Relay protocol. However,
we already have another newer and better implementation of Frame Relay
provided by the HDLC_FR driver (hdlc_fr.c).

The DLCI driver's implementation of Frame Relay is used by only one
hardware driver in the kernel - the SDLA driver (sdla.c).

The SDLA driver provides Frame Relay support for the Sangoma S50x devices.
However, the vendor provides their own driver (along with their own
multi-WAN-protocol implementations including Frame Relay), called WANPIPE.
I believe most users of the hardware would use the vendor-provided WANPIPE
driver instead.

(The WANPIPE driver was even once in the kernel, but was deleted in
commit 8db60bcf ("[WAN]: Remove broken and unmaintained Sangoma
drivers.") because the vendor no longer updated the in-kernel WANPIPE
driver.)

Cc: Mike McLagan <mike.mclagan@linux.org>
Signed-off-by: NXie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201114150921.685594-1-xie.he.0141@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
      f7365919
  5. 11 11月, 2020 2 次提交
  7. 10 11月, 2020 2 次提交
  9. 07 11月, 2020 3 次提交
  11. 06 11月, 2020 3 次提交
  13. 01 11月, 2020 1 次提交
  15. 31 10月, 2020 4 次提交
  17. 30 10月, 2020 8 次提交
    • H
      bridge: cfm: Netlink GET status Interface. · e77824d8
      由 Henrik Bjoernlund 提交于 
      This is the implementation of CFM netlink status
get information interface.

Add new nested netlink attributes. These attributes are used by the
user space to get status information.

GETLINK:
    Request filter RTEXT_FILTER_CFM_STATUS:
    Indicating that CFM status information must be delivered.

    IFLA_BRIDGE_CFM:
        Points to the CFM information.

    IFLA_BRIDGE_CFM_MEP_STATUS_INFO:
        This indicate that the MEP instance status are following.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO:
        This indicate that the peer MEP status are following.

CFM nested attribute has the following attributes in next level.

GETLINK RTEXT_FILTER_CFM_STATUS:
    IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE:
        The MEP instance number of the delivered status.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN:
        The MEP instance received CFM PDU with unexpected Opcode.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN:
        The MEP instance received CFM PDU with unexpected version.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN:
        The MEP instance received CCM PDU with MD level lower than
        configured level. This frame is discarded.
        The type is u32 (bool).

    IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE:
        The MEP instance number of the delivered status.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID:
        The added Peer MEP ID of the delivered status.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT:
        The CCM defect status.
        The type is u32 (bool).
        True means no CCM frame is received for 3.25 intervals.
        IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI:
        The last received CCM PDU RDI.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE:
        The last received CCM PDU Port Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE:
        The last received CCM PDU Interface Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN:
        A CCM frame has been received from Peer MEP.
        The type is u32 (bool).
        This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN:
        A CCM frame with TLV has been received from Peer MEP.
        The type is u32 (bool).
        This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN:
        A CCM frame with unexpected sequence number has been received
        from Peer MEP.
        The type is u32 (bool).
        When a sequence number is not one higher than previously received
        then it is unexpected.
        This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
Signed-off-by: NHenrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: NHoratiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      e77824d8
    • H
      bridge: cfm: Netlink GET configuration Interface. · 5e312fc0
      由 Henrik Bjoernlund 提交于 
      This is the implementation of CFM netlink configuration
get information interface.

Add new nested netlink attributes. These attributes are used by the
user space to get configuration information.

GETLINK:
    Request filter RTEXT_FILTER_CFM_CONFIG:
    Indicating that CFM configuration information must be delivered.

    IFLA_BRIDGE_CFM:
        Points to the CFM information.

    IFLA_BRIDGE_CFM_MEP_CREATE_INFO:
        This indicate that MEP instance create parameters are following.
    IFLA_BRIDGE_CFM_MEP_CONFIG_INFO:
        This indicate that MEP instance config parameters are following.
    IFLA_BRIDGE_CFM_CC_CONFIG_INFO:
        This indicate that MEP instance CC functionality
        parameters are following.
    IFLA_BRIDGE_CFM_CC_RDI_INFO:
        This indicate that CC transmitted CCM PDU RDI
        parameters are following.
    IFLA_BRIDGE_CFM_CC_CCM_TX_INFO:
        This indicate that CC transmitted CCM PDU parameters are
        following.
    IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO:
        This indicate that the added peer MEP IDs are following.

CFM nested attribute has the following attributes in next level.

GETLINK RTEXT_FILTER_CFM_CONFIG:
    IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
        The created MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
        The created MEP domain.
        The type is u32 (br_cfm_domain).
        It must be BR_CFM_PORT.
        This means that CFM frames are transmitted and received
        directly on the port - untagged. Not in a VLAN.
    IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
        The created MEP direction.
        The type is u32 (br_cfm_mep_direction).
        It must be BR_CFM_MEP_DIRECTION_DOWN.
        This means that CFM frames are transmitted and received on
        the port. Not in the bridge.
    IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
        The created MEP residence port ifindex.
        The type is u32 (ifindex).

    IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
        The deleted MEP instance number.
        The type is u32.

    IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
        The configured MEP unicast MAC address.
        The type is 6*u8 (array).
        This is used as SMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
        The configured MEP unicast MD level.
        The type is u32.
        It must be in the range 1-7.
        No CFM frames are passing through this MEP on lower levels.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
        The configured MEP ID.
        The type is u32.
        It must be in the range 0-0x1FFF.
        This MEP ID is inserted in any transmitted CCM frame.

    IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
        The Continuity Check (CC) functionality is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
        The CC expected receive interval of CCM frames.
        The type is u32 (br_cfm_ccm_interval).
        This is also the transmission interval of CCM frames when enabled.
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
        The CC expected receive MAID in CCM frames.
        The type is CFM_MAID_LENGTH*u8.
        This is MAID is also inserted in transmitted CCM frames.

    IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_MEPID:
        The CC Peer MEP ID added.
        The type is u32.
        When a Peer MEP ID is added and CC is enabled it is expected to
        receive CCM frames from that Peer MEP.

    IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_RDI_RDI:
        The RDI that is inserted in transmitted CCM PDU.
        The type is u32 (bool).

    IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
        The transmitted CCM frame destination MAC address.
        The type is 6*u8 (array).
        This is used as DMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
        The transmitted CCM frame update (increment) of sequence
        number is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
        The period of time where CCM frame are transmitted.
        The type is u32.
        The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
        must be done before timeout to keep transmission alive.
        When period is zero any ongoing CCM frame transmission
        will be stopped.
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
        The transmitted CCM frame update with Interface Status TLV
        is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
        The transmitted Interface Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
        The transmitted CCM frame update with Port Status TLV is enabled
        or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
        The transmitted Port Status TLV value field.
        The type is u8.
Signed-off-by: NHenrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: NHoratiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      5e312fc0
    • H
      bridge: cfm: Netlink SET configuration Interface. · 2be665c3
      由 Henrik Bjoernlund 提交于 
      This is the implementation of CFM netlink configuration
set information interface.

Add new nested netlink attributes. These attributes are used by the
user space to create/delete/configure CFM instances.

SETLINK:
    IFLA_BRIDGE_CFM:
        Indicate that the following attributes are CFM.

    IFLA_BRIDGE_CFM_MEP_CREATE:
        This indicate that a MEP instance must be created.
    IFLA_BRIDGE_CFM_MEP_DELETE:
        This indicate that a MEP instance must be deleted.
    IFLA_BRIDGE_CFM_MEP_CONFIG:
        This indicate that a MEP instance must be configured.
    IFLA_BRIDGE_CFM_CC_CONFIG:
        This indicate that a MEP instance Continuity Check (CC)
        functionality must be configured.
    IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD:
        This indicate that a CC Peer MEP must be added.
    IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE:
        This indicate that a CC Peer MEP must be removed.
    IFLA_BRIDGE_CFM_CC_CCM_TX:
        This indicate that the CC transmitted CCM PDU must be configured.
    IFLA_BRIDGE_CFM_CC_RDI:
        This indicate that the CC transmitted CCM PDU RDI must be
        configured.

CFM nested attribute has the following attributes in next level.

SETLINK RTEXT_FILTER_CFM_CONFIG:
    IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
        The created MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
        The created MEP domain.
        The type is u32 (br_cfm_domain).
        It must be BR_CFM_PORT.
        This means that CFM frames are transmitted and received
        directly on the port - untagged. Not in a VLAN.
    IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
        The created MEP direction.
        The type is u32 (br_cfm_mep_direction).
        It must be BR_CFM_MEP_DIRECTION_DOWN.
        This means that CFM frames are transmitted and received on
        the port. Not in the bridge.
    IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
        The created MEP residence port ifindex.
        The type is u32 (ifindex).

    IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
        The deleted MEP instance number.
        The type is u32.

    IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
        The configured MEP unicast MAC address.
        The type is 6*u8 (array).
        This is used as SMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
        The configured MEP unicast MD level.
        The type is u32.
        It must be in the range 1-7.
        No CFM frames are passing through this MEP on lower levels.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
        The configured MEP ID.
        The type is u32.
        It must be in the range 0-0x1FFF.
        This MEP ID is inserted in any transmitted CCM frame.

    IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
        The Continuity Check (CC) functionality is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
        The CC expected receive interval of CCM frames.
        The type is u32 (br_cfm_ccm_interval).
        This is also the transmission interval of CCM frames when enabled.
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
        The CC expected receive MAID in CCM frames.
        The type is CFM_MAID_LENGTH*u8.
        This is MAID is also inserted in transmitted CCM frames.

    IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_MEPID:
        The CC Peer MEP ID added.
        The type is u32.
        When a Peer MEP ID is added and CC is enabled it is expected to
        receive CCM frames from that Peer MEP.

    IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_RDI_RDI:
        The RDI that is inserted in transmitted CCM PDU.
        The type is u32 (bool).

    IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
        The transmitted CCM frame destination MAC address.
        The type is 6*u8 (array).
        This is used as DMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
        The transmitted CCM frame update (increment) of sequence
        number is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
        The period of time where CCM frame are transmitted.
        The type is u32.
        The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
        must be done before timeout to keep transmission alive.
        When period is zero any ongoing CCM frame transmission
        will be stopped.
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
        The transmitted CCM frame update with Interface Status TLV
        is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
        The transmitted Interface Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
        The transmitted CCM frame update with Port Status TLV is enabled
        or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
        The transmitted Port Status TLV value field.
        The type is u8.
Signed-off-by: NHenrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: NHoratiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      2be665c3
    • H
      bridge: cfm: Kernel space implementation of CFM. CCM frame RX added. · dc32cbb3
      由 Henrik Bjoernlund 提交于 
      This is the third commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.

Functionality is extended with CCM frame reception.
The MEP instance now contains CCM based status information.
Most important is the CCM defect status indicating if correct
CCM frames are received with the expected interval.
Signed-off-by: NHenrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: NHoratiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      dc32cbb3
    • H
      bridge: cfm: Kernel space implementation of CFM. CCM frame TX added. · a806ad8e
      由 Henrik Bjoernlund 提交于 
      This is the second commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.

Functionality is extended with CCM frame transmission.

Interface is extended with these functions:
br_cfm_cc_rdi_set()
br_cfm_cc_ccm_tx()
br_cfm_cc_config_set()

A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
    The Continuity Check parameters can be configured to be used when
    transmitting CCM.

A MEP can be configured to start or stop transmission of CCM frames by
br_cfm_cc_ccm_tx()
    The CCM will be transmitted for a selected period in seconds.
    Must call this function before timeout to keep transmission alive.

A MEP transmitting CCM can be configured with inserted RDI in PDU by
br_cfm_cc_rdi_set()
Signed-off-by: NHenrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: NHoratiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      a806ad8e
    • H
      bridge: cfm: Kernel space implementation of CFM. MEP create/delete. · 86a14b79
      由 Henrik Bjoernlund 提交于 
      This is the first commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.

It contains MEP instance create, delete and configuration.

Connectivity Fault Management (CFM) comprises capabilities for
detecting, verifying, and isolating connectivity failures in
Virtual Bridged Networks. These capabilities can be used in
networks operated by multiple independent organizations, each
with restricted management access to each others equipment.

CFM functions are partitioned as follows:
    - Path discovery
    - Fault detection
    - Fault verification and isolation
    - Fault notification
    - Fault recovery

Interface consists of these functions:
br_cfm_mep_create()
br_cfm_mep_delete()
br_cfm_mep_config_set()
br_cfm_cc_config_set()
br_cfm_cc_peer_mep_add()
br_cfm_cc_peer_mep_remove()

A MEP instance is created by br_cfm_mep_create()
    -It is the Maintenance association End Point
     described in 802.1Q section 19.2.
    -It is created on a specific level (1-7) and is assuring
     that no CFM frames are passing through this MEP on lower levels.
    -It initiates and validates CFM frames on its level.
    -It can only exist on a port that is related to a bridge.
    -Attributes given cannot be changed until the instance is
     deleted.

A MEP instance can be deleted by br_cfm_mep_delete().

A created MEP instance has attributes that can be
configured by br_cfm_mep_config_set().

A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
    The Continuity Check Receiver state machine can be
    enabled and disabled.
    According to 802.1Q section 19.2.8

A MEP can have Peer MEPs added and removed by
br_cfm_cc_peer_mep_add() and br_cfm_cc_peer_mep_remove()
    The Continuity Check feature can maintain connectivity
    status on each added Peer MEP.
Signed-off-by: NHenrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: NHoratiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      86a14b79
    • H
      bridge: uapi: cfm: Added EtherType used by the CFM protocol. · fbaedb41
      由 Henrik Bjoernlund 提交于 
      This EtherType is used by all CFM protocal frames transmitted
according to 802.1Q section 12.14.
Signed-off-by: NHenrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: NHoratiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: NNikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      fbaedb41
    • A
      wimax: move out to staging · f54ec58f
      由 Arnd Bergmann 提交于 
      There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.

According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there
have been many public wimax networks, but it appears that many of these
have migrated to LTE or discontinued their service altogether.
As most PCs and phones lack WiMAX hardware support, the remaining
networks tend to use standalone routers. These almost certainly
run Linux, but not a modern kernel or the mainline wimax driver stack.

NetworkManager appears to have dropped userspace support in 2015
https://bugzilla.gnome.org/show_bug.cgi?id=747846, the
www.linuxwimax.org
site had already shut down earlier.

WiMax is apparently still being deployed on airport campus networks
("AeroMACS"), but in a frequency band that was not supported by the old
Intel 2400m (used in Sandy Bridge laptops and earlier), which is the
only driver using the kernel's wimax stack.

Move all files into drivers/staging/wimax, including the uapi header
files and documentation, to make it easier to remove it when it gets
to that. Only minimal changes are made to the source files, in order
to make it possible to port patches across the move.

Also remove the MAINTAINERS entry that refers to a broken mailing
list and website.
Acked-by: NJakub Kicinski <kuba@kernel.org>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Suggested-by: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      f54ec58f
  19. 29 10月, 2020 1 次提交
  21. 28 10月, 2020 5 次提交
  23. 26 10月, 2020 1 次提交
  25. 23 10月, 2020 1 次提交
  27. 22 10月, 2020 2 次提交
  29. 20 10月, 2020 1 次提交
  31. 19 10月, 2020 1 次提交
    • M
      mm/madvise: introduce process_madvise() syscall: an external memory hinting API · ecb8ac8b
      由 Minchan Kim 提交于 
      There is usecase that System Management Software(SMS) want to give a
memory hint like MADV_[COLD|PAGEEOUT] to other processes and in the
case of Android, it is the ActivityManagerService.

The information required to make the reclaim decision is not known to the
app.  Instead, it is known to the centralized userspace
daemon(ActivityManagerService), and that daemon must be able to initiate
reclaim on its own without any app involvement.

To solve the issue, this patch introduces a new syscall
process_madvise(2).  It uses pidfd of an external process to give the
hint.  It also supports vector address range because Android app has
thousands of vmas due to zygote so it's totally waste of CPU and power if
we should call the syscall one by one for each vma.(With testing 2000-vma
syscall vs 1-vector syscall, it showed 15% performance improvement.  I
think it would be bigger in real practice because the testing ran very
cache friendly environment).

Another potential use case for the vector range is to amortize the cost
ofTLB shootdowns for multiple ranges when using MADV_DONTNEED; this could
benefit users like TCP receive zerocopy and malloc implementations.  In
future, we could find more usecases for other advises so let's make it
happens as API since we introduce a new syscall at this moment.  With
that, existing madvise(2) user could replace it with process_madvise(2)
with their own pid if they want to have batch address ranges support
feature.

ince it could affect other process's address range, only privileged
process(PTRACE_MODE_ATTACH_FSCREDS) or something else(e.g., being the same
UID) gives it the right to ptrace the process could use it successfully.
The flag argument is reserved for future use if we need to extend the API.

I think supporting all hints madvise has/will supported/support to
process_madvise is rather risky.  Because we are not sure all hints make
sense from external process and implementation for the hint may rely on
the caller being in the current context so it could be error-prone.  Thus,
I just limited hints as MADV_[COLD|PAGEOUT] in this patch.

If someone want to add other hints, we could hear the usecase and review
it for each hint.  It's safer for maintenance rather than introducing a
buggy syscall but hard to fix it later.

So finally, the API is as follows,

      ssize_t process_madvise(int pidfd, const struct iovec *iovec,
                unsigned long vlen, int advice, unsigned int flags);

    DESCRIPTION
      The process_madvise() system call is used to give advice or directions
      to the kernel about the address ranges from external process as well as
      local process. It provides the advice to address ranges of process
      described by iovec and vlen. The goal of such advice is to improve
      system or application performance.

      The pidfd selects the process referred to by the PID file descriptor
      specified in pidfd. (See pidofd_open(2) for further information)

      The pointer iovec points to an array of iovec structures, defined in
      <sys/uio.h> as:

        struct iovec {
            void *iov_base;         /* starting address */
            size_t iov_len;         /* number of bytes to be advised */
        };

      The iovec describes address ranges beginning at address(iov_base)
      and with size length of bytes(iov_len).

      The vlen represents the number of elements in iovec.

      The advice is indicated in the advice argument, which is one of the
      following at this moment if the target process specified by pidfd is
      external.

        MADV_COLD
        MADV_PAGEOUT

      Permission to provide a hint to external process is governed by a
      ptrace access mode PTRACE_MODE_ATTACH_FSCREDS check; see ptrace(2).

      The process_madvise supports every advice madvise(2) has if target
      process is in same thread group with calling process so user could
      use process_madvise(2) to extend existing madvise(2) to support
      vector address ranges.

    RETURN VALUE
      On success, process_madvise() returns the number of bytes advised.
      This return value may be less than the total number of requested
      bytes, if an error occurred. The caller should check return value
      to determine whether a partial advice occurred.

FAQ:

Q.1 - Why does any external entity have better knowledge?

Quote from Sandeep

"For Android, every application (including the special SystemServer)
are forked from Zygote.  The reason of course is to share as many
libraries and classes between the two as possible to benefit from the
preloading during boot.

After applications start, (almost) all of the APIs end up calling into
this SystemServer process over IPC (binder) and back to the
application.

In a fully running system, the SystemServer monitors every single
process periodically to calculate their PSS / RSS and also decides
which process is "important" to the user for interactivity.

So, because of how these processes start _and_ the fact that the
SystemServer is looping to monitor each process, it does tend to *know*
which address range of the application is not used / useful.

Besides, we can never rely on applications to clean things up
themselves.  We've had the "hey app1, the system is low on memory,
please trim your memory usage down" notifications for a long time[1].
They rely on applications honoring the broadcasts and very few do.

So, if we want to avoid the inevitable killing of the application and
restarting it, some way to be able to tell the OS about unimportant
memory in these applications will be useful.

- ssp

Q.2 - How to guarantee the race(i.e., object validation) between when
giving a hint from an external process and get the hint from the target
process?

process_madvise operates on the target process's address space as it
exists at the instant that process_madvise is called.  If the space
target process can run between the time the process_madvise process
inspects the target process address space and the time that
process_madvise is actually called, process_madvise may operate on
memory regions that the calling process does not expect.  It's the
responsibility of the process calling process_madvise to close this
race condition.  For example, the calling process can suspend the
target process with ptrace, SIGSTOP, or the freezer cgroup so that it
doesn't have an opportunity to change its own address space before
process_madvise is called.  Another option is to operate on memory
regions that the caller knows a priori will be unchanged in the target
process.  Yet another option is to accept the race for certain
process_madvise calls after reasoning that mistargeting will do no
harm.  The suggested API itself does not provide synchronization.  It
also apply other APIs like move_pages, process_vm_write.

The race isn't really a problem though.  Why is it so wrong to require
that callers do their own synchronization in some manner?  Nobody
objects to write(2) merely because it's possible for two processes to
open the same file and clobber each other's writes --- instead, we tell
people to use flock or something.  Think about mmap.  It never
guarantees newly allocated address space is still valid when the user
tries to access it because other threads could unmap the memory right
before.  That's where we need synchronization by using other API or
design from userside.  It shouldn't be part of API itself.  If someone
needs more fine-grained synchronization rather than process level,
there were two ideas suggested - cookie[2] and anon-fd[3].  Both are
applicable via using last reserved argument of the API but I don't
think it's necessary right now since we have already ways to prevent
the race so don't want to add additional complexity with more
fine-grained optimization model.

To make the API extend, it reserved an unsigned long as last argument
so we could support it in future if someone really needs it.

Q.3 - Why doesn't ptrace work?

Injecting an madvise in the target process using ptrace would not work
for us because such injected madvise would have to be executed by the
target process, which means that process would have to be runnable and
that creates the risk of the abovementioned race and hinting a wrong
VMA.  Furthermore, we want to act the hint in caller's context, not the
callee's, because the callee is usually limited in cpuset/cgroups or
even freezed state so they can't act by themselves quick enough, which
causes more thrashing/kill.  It doesn't work if the target process are
ptraced(e.g., strace, debugger, minidump) because a process can have at
most one ptracer.

[1] https://developer.android.com/topic/performance/memory"

[2] process_getinfo for getting the cookie which is updated whenever
    vma of process address layout are changed - Daniel Colascione -
    https://lore.kernel.org/lkml/20190520035254.57579-1-minchan@kernel.org/T/#m7694416fd179b2066a2c62b5b139b14e3894e224

[3] anonymous fd which is used for the object(i.e., address range)
    validation - Michal Hocko -
    https://lore.kernel.org/lkml/20200120112722.GY18451@dhcp22.suse.cz/

[minchan@kernel.org: fix process_madvise build break for arm64]
  Link: http://lkml.kernel.org/r/20200303145756.GA219683@google.com
[minchan@kernel.org: fix build error for mips of process_madvise]
  Link: http://lkml.kernel.org/r/20200508052517.GA197378@google.com
[akpm@linux-foundation.org: fix patch ordering issue]
[akpm@linux-foundation.org: fix arm64 whoops]
[minchan@kernel.org: make process_madvise() vlen arg have type size_t, per Florian]
[akpm@linux-foundation.org: fix i386 build]
[sfr@canb.auug.org.au: fix syscall numbering]
  Link: https://lkml.kernel.org/r/20200905142639.49fc3f1a@canb.auug.org.au
[sfr@canb.auug.org.au: madvise.c needs compat.h]
  Link: https://lkml.kernel.org/r/20200908204547.285646b4@canb.auug.org.au
[minchan@kernel.org: fix mips build]
  Link: https://lkml.kernel.org/r/20200909173655.GC2435453@google.com
[yuehaibing@huawei.com: remove duplicate header which is included twice]
  Link: https://lkml.kernel.org/r/20200915121550.30584-1-yuehaibing@huawei.com
[minchan@kernel.org: do not use helper functions for process_madvise]
  Link: https://lkml.kernel.org/r/20200921175539.GB387368@google.com
[akpm@linux-foundation.org: pidfd_get_pid() gained an argument]
[sfr@canb.auug.org.au: fix up for "iov_iter: transparently handle compat iovecs in import_iovec"]
  Link: https://lkml.kernel.org/r/20200928212542.468e1fef@canb.auug.org.auSigned-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NSuren Baghdasaryan <surenb@google.com>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Dias <joaodias@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200302193630.68771-3-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200508183320.GA125527@google.com
Link: http://lkml.kernel.org/r/20200622192900.22757-4-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-4-minchan@kernel.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ecb8ac8b
  33. 17 10月, 2020 2 次提交