The comparison of the u32 variable wgds_tbl_idx with less than zero is
always going to be false because it is unsigned.  Fix this by making
wgds_tbl_idx a plain signed int.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 4fd445a2 ("iwlwifi: mvm: Add log information about SAR status")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This code clearly never could have worked, since it locks
while already locked. Add an unlocked __iwl_mvm_mac_set_key()
variant that doesn't do locking to fix that.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The driver should call iwl_dbg_tlv_free even if debugfs is not defined
since ini mode does not depend on debugfs ifdef.
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Fixes: 68f6f492 ("iwlwifi: trans: support loading ini TLVs from external file")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

ini debug mode should work even if debug override is not defined.
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Fixes: 68f6f492 ("iwlwifi: trans: support loading ini TLVs from external file")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

iwl_mvm_rs_tx_status can be called from two places in the code, but the
mutex is taken only on one of the calls. Split it into a wrapper taking
locks and an internal __iwl_mvm_rs_tx_status function.
Signed-off-by: NGregory Greenman <gregory.greenman@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In order to support MSI-X efficiently, we want to avoid
communication across Rx queues. Each Rx queue should have
all the data it needs to process a packet.

The reordering buffer is a challenge in the MSI-X world
since we can have a single BA session whose packets are
directed to different queues. This is why each queue has
its own reordering buffer. The hardware is able to hint
the driver whether we have a hole or not, which allows
the driver to know whether it can release a packet or not.
This indication is called NSSN. Roughly, if the packet's
SN is lower than the NSSN, we can release the packet to
the stack. The NSSN is the SN of the newest packet received
without any holes + 1.

This is working as long as we don't have packets that we
release because of a timeout. When that happens, we could
have taken the decision to release a packet after we have
been waiting for its predecessor for too long. If this
predecessor comes later, we have to drop it because we
can't release packets out of order. In that case, the
hardware will give us an indication that we can we release
the packet (SN < NSSN), but the packet still needs to be
dropped.
This is why we sometimes need to ignore the NSSN and we
track the head_sn in software.
Here is a specific example of this:

1) Rx queue 1 got packets: 480, 482, 483
2) We release 480 to to the stack and wait for 481
3) NSSN is now 481
4) The timeout expires
5) We release 482 and 483, NSSN is still 480
6) 481 arrives its NSSN is 484.

We need to drop 481 even if 481 < 484. This is why we'll
update the head_sn to 484 at step 2. The flow now is:

1) Rx queue 1 got packets: 480, 482, 483
2) We release 480 to to the stack and wait for 481
3) NSSN is now 481 / head_sn is 481
4) The timeout expires
5) We release 482 and 483, NSSN is still 480 but head_sn is 484.
6) 481 arrives its NSSN is 484, but head_sn is 484 and we drop it.

This code introduces another problem in case all the traffic
goes well (no hole, no timeout):

Rx queue 1: 0   -> 483   (head_sn = 484)
Rx queue 2: 501 -> 4095  (head_sn = 0)
Rx queue 2: 0   -> 480   (head_sn = 481)
Rx queue 1: 481 but head_sn = 484 and we drop it.

At this point, the SN of queue 1 is far behind: more than
4040 packets behind. Queue 1 will consider 481 "old"
because 481 is in [501-64:501] whereas it is a very new
packet.

In order to fix that, send an Rx notification from time to
time (twice across the full set of 4096 packets) to make
sure no Rx queue is lagging too far behind.

What will happen then is:

Rx queue 1: 0    -> 483       (head_sn = 484)
Rx queue 2: 501  -> 2047      (head_sn = 2048)
Rx queue 1: Sync nofication   (head_sn = 2048)
Rx queue 2: 2048 -> 4095      (head_sn = 0)
Rx queue 1: Sync notification (head_sn = 0)
Rx queue 2: 1    -> 481       (head_sn = 482)
Rx queue 1: 481 and head_sn = 0.

In queue 1's data, head_sn is now 0, the packet coming in
is 481, it'll understand that the new packet is new and it
won't be dropped.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Instead of allocating memory for which we have an upper
limit, use a small buffer on stack.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

We will soon be using a new notification that will be
initiated by the driver, sent to the firmware and sent
back to all the RSS queues by the firmware. This new
notification will be useful to synchronize the NSSN across
all the queues.

For now, don't send the notification, just add the code to
handle it. Later patch will add the code to actually send
it.

While at it, validate the baid coming from the firmware to
avoid accessing an array with a bad index in the driver.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

We will need a new type of synchronization message going
through all the RSS queues. Prepare the ground for this.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Firmware versions before 41 don't support the GEO_TX_POWER_LIMIT
command, and sending it to the firmware will cause a firmware crash.
We allow this via debugfs, so we need to return an error value in case
it's not supported.

This had already been fixed during init, when we send the command if
the ACPI WGDS table is present.  Fix it also for the other,
userspace-triggered case.

Cc: stable@vger.kernel.org
Fixes: 7fe90e0e ("iwlwifi: mvm: refactor geo init")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Rate perform uses the lq_sta table to calculate the next rate to scale
while rate init resets the same table,

Rate perform is done in soft irq context in parallel to rate init
that can be called in case we are doing changes like AP changes BW
or moving state for auth to assoc.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

On older NICs, we occasionally see issues with A-MSDU support,
where the commands in the FIFO get confused and then we see an
assert EDC because the next command in the FIFO isn't TX.

We've tried to isolate this issue and understand where it comes
from, but haven't found any errors in building the A-MSDU in
software.

At least for now, disable A-MSDU support on older hardware so
that users can use it again without fearing the assert.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=203315.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.

   kernel BUG at drivers/iommu/iova.c:801!
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0
    Call Trace:
     free_cpu_cached_iovas+0xbd/0x150
     alloc_iova_fast+0x8c/0xba
     dma_ops_alloc_iova.isra.6+0x65/0xa0
     map_sg+0x8c/0x2a0
     scsi_dma_map+0xc6/0x160
     pqi_aio_submit_io+0x1f6/0x440 [smartpqi]
     pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi]
     scsi_queue_rq+0x79c/0x1200
     blk_mq_dispatch_rq_list+0x4dc/0xb70
     blk_mq_sched_dispatch_requests+0x249/0x310
     __blk_mq_run_hw_queue+0x128/0x200
     blk_mq_run_work_fn+0x27/0x30
     process_one_work+0x522/0xa10
     worker_thread+0x63/0x5b0
     kthread+0x1d2/0x1f0
     ret_from_fork+0x22/0x40

Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method")
Signed-off-by: NQian Cai <cai@lca.pw>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the function alps_is_cs19_trackpoint(), we check if the param[1] is
in the 0x20~0x2f range, but the code we wrote for this checking is not
correct:
(param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f,
it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f...

Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20).

Fixes: 7e4935cc ("Input: alps - don't handle ALPS cs19 trackpoint-only device")
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

trackpoint_detect() should be static inline while
CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails:

drivers/input/mouse/alps.o: In function `trackpoint_detect':
alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect'
drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: 55e3d922 ("Input: psmouse - allow disabing certain protocol extensions")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/input/keyboard/applespi.c: In function applespi_set_bl_level:
drivers/input/keyboard/applespi.c:902:6: warning: variable sts set but not used [-Wunused-but-set-variable]

Fixes: b426ac0452093d ("Input: add Apple SPI keyboard and trackpad driver")
Signed-off-by: NMao Wenan <maowenan@huawei.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The keyboard and trackpad on recent MacBook's (since 8,1) and
MacBookPro's (13,* and 14,*) are attached to an SPI controller instead
of USB, as previously. The higher level protocol is not publicly
documented and hence has been reverse engineered. As a consequence there
are still a number of unknown fields and commands. However, the known
parts have been working well and received extensive testing and use.

In order for this driver to work, the proper SPI drivers need to be
loaded too; for MB8,1 these are spi_pxa2xx_platform and spi_pxa2xx_pci;
for all others they are spi_pxa2xx_platform and intel_lpss_pci.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=99891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=108331Signed-off-by: NRonald Tschalär <ronald@innovation.ch>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Appears to be fixed by "flcn/gp102-: improve implementation of
bind_context() on SEC2/GSP".

Tested on GP10[24678] and GV100.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes various issues encountered while attempting to initialise ACR.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In nouveau_conn_reset(), if connector->state is true,
__drm_atomic_helper_connector_destroy_state() will be called,
but the memory pointed by asyc isn't freed. Memory leak happens
in the following function __drm_atomic_helper_connector_reset(),
where newly allocated asyc->state will be assigned to connector->state.

So using nouveau_conn_atomic_destroy_state() instead of
__drm_atomic_helper_connector_destroy_state to free the "old" asyc.

Here the is the log showing memory leak.

unreferenced object 0xffff8c5480483c80 (size 192):
  comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s)
  hex dump (first 32 bytes):
    00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00  ...{T...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0
    [<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau]
    [<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau]
    [<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau]
    [<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau]
    [<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau]
    [<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau]
    [<000000007e961c3e>] local_pci_probe+0x47/0xa0
    [<00000000da14d569>] work_for_cpu_fn+0x1a/0x30
    [<0000000028da4805>] process_one_work+0x27c/0x660
    [<000000001d415b04>] worker_thread+0x22b/0x3f0
    [<0000000003b69f1f>] kthread+0x12f/0x150
    [<00000000c94c29b7>] ret_from_fork+0x3a/0x50
Signed-off-by: NYongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In nouveau_dmem_pages_alloc(), the drm->dmem->mutex is unlocked before
calling nouveau_dmem_chunk_alloc() as shown when CONFIG_PROVE_LOCKING
is enabled:

[ 1294.871933] =====================================
[ 1294.876656] WARNING: bad unlock balance detected!
[ 1294.881375] 5.2.0-rc3+ #5 Not tainted
[ 1294.885048] -------------------------------------
[ 1294.889773] test-malloc-vra/6299 is trying to release lock (&drm->dmem->mutex) at:
[ 1294.897482] [<ffffffffa01a220f>] nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau]
[ 1294.905782] but there are no more locks to release!
[ 1294.910690]
[ 1294.910690] other info that might help us debug this:
[ 1294.917249] 1 lock held by test-malloc-vra/6299:
[ 1294.921881]  #0: 0000000016e10454 (&mm->mmap_sem#2){++++}, at: nouveau_svmm_bind+0x142/0x210 [nouveau]
[ 1294.931313]
[ 1294.931313] stack backtrace:
[ 1294.935702] CPU: 4 PID: 6299 Comm: test-malloc-vra Not tainted 5.2.0-rc3+ #5
[ 1294.942786] Hardware name: ASUS X299-A/PRIME X299-A, BIOS 1401 05/21/2018
[ 1294.949590] Call Trace:
[ 1294.952059]  dump_stack+0x7c/0xc0
[ 1294.955469]  ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau]
[ 1294.962213]  print_unlock_imbalance_bug.cold.52+0xca/0xcf
[ 1294.967641]  lock_release+0x306/0x380
[ 1294.971383]  ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau]
[ 1294.978089]  ? lock_downgrade+0x2d0/0x2d0
[ 1294.982121]  ? find_held_lock+0xac/0xd0
[ 1294.985979]  __mutex_unlock_slowpath+0x8f/0x3f0
[ 1294.990540]  ? wait_for_completion+0x230/0x230
[ 1294.995002]  ? rwlock_bug.part.2+0x60/0x60
[ 1294.999197]  nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau]
[ 1295.005751]  ? page_mapping+0x98/0x110
[ 1295.009511]  migrate_vma+0xa74/0x1090
[ 1295.013186]  ? move_to_new_page+0x480/0x480
[ 1295.017400]  ? __kmalloc+0x153/0x300
[ 1295.021052]  ? nouveau_dmem_migrate_vma+0xd8/0x1e0 [nouveau]
[ 1295.026796]  nouveau_dmem_migrate_vma+0x157/0x1e0 [nouveau]
[ 1295.032466]  ? nouveau_dmem_init+0x490/0x490 [nouveau]
[ 1295.037612]  ? vmacache_find+0xc2/0x110
[ 1295.041537]  nouveau_svmm_bind+0x1b4/0x210 [nouveau]
[ 1295.046583]  ? nouveau_svm_fault+0x13e0/0x13e0 [nouveau]
[ 1295.051912]  drm_ioctl_kernel+0x14d/0x1a0
[ 1295.055930]  ? drm_setversion+0x330/0x330
[ 1295.059971]  drm_ioctl+0x308/0x530
[ 1295.063384]  ? drm_version+0x150/0x150
[ 1295.067153]  ? find_held_lock+0xac/0xd0
[ 1295.070996]  ? __pm_runtime_resume+0x3f/0xa0
[ 1295.075285]  ? mark_held_locks+0x29/0xa0
[ 1295.079230]  ? _raw_spin_unlock_irqrestore+0x3c/0x50
[ 1295.084232]  ? lockdep_hardirqs_on+0x17d/0x250
[ 1295.088768]  nouveau_drm_ioctl+0x9a/0x100 [nouveau]
[ 1295.093661]  do_vfs_ioctl+0x137/0x9a0
[ 1295.097341]  ? ioctl_preallocate+0x140/0x140
[ 1295.101623]  ? match_held_lock+0x1b/0x230
[ 1295.105646]  ? match_held_lock+0x1b/0x230
[ 1295.109660]  ? find_held_lock+0xac/0xd0
[ 1295.113512]  ? __do_page_fault+0x324/0x630
[ 1295.117617]  ? lock_downgrade+0x2d0/0x2d0
[ 1295.121648]  ? mark_held_locks+0x79/0xa0
[ 1295.125583]  ? handle_mm_fault+0x352/0x430
[ 1295.129687]  ksys_ioctl+0x60/0x90
[ 1295.133020]  ? mark_held_locks+0x29/0xa0
[ 1295.136964]  __x64_sys_ioctl+0x3d/0x50
[ 1295.140726]  do_syscall_64+0x68/0x250
[ 1295.144400]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1295.149465] RIP: 0033:0x7f1a3495809b
[ 1295.153053] Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48
[ 1295.171850] RSP: 002b:00007ffef7ed1358 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 1295.179451] RAX: ffffffffffffffda RBX: 00007ffef7ed1628 RCX: 00007f1a3495809b
[ 1295.186601] RDX: 00007ffef7ed13b0 RSI: 0000000040406449 RDI: 0000000000000004
[ 1295.193759] RBP: 00007ffef7ed13b0 R08: 0000000000000000 R09: 000000000157e770
[ 1295.200917] R10: 000000000151c010 R11: 0000000000000246 R12: 0000000040406449
[ 1295.208083] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000

Reacquire the lock before continuing to the next page.
Signed-off-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

fixes bogus values userspace gets from hwmon while the GPU is powered down
Signed-off-by: NKarol Herbst <kherbst@redhat.com>
Reviewed-by: NRhys Kidd <rhyskidd@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
were simply missing the boiler plate and got caught up in the global update.

Fixes: 96ac6d43 (treewide: Add SPDX license identifier - Kbuild)
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily header files) were simply missing the boiler plate and got
caught up in the global update.

Fixes: b2441318 (License cleanup: add SPDX GPL-2.0 license identifier to files with no license)
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Acked-by: NEmil Velikov <emil.l.velikov@gmail.com>
Acked-by: NKarol Herbst <kherbst@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

It turns out that while disabling i2c bus access from software when the
GPU is suspended was a step in the right direction with:

commit 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")

We also ended up accidentally breaking the vbios init scripts on some
older Tesla GPUs, as apparently said scripts can actually use the i2c
bus. Since these scripts are executed before initializing any
subdevices, we end up failing to acquire access to the i2c bus which has
left a number of cards with their fan controllers uninitialized. Luckily
this doesn't break hardware - it just means the fan gets stuck at 100%.

This also means that we've always been using our i2c busses before
initializing them during the init scripts for older GPUs, we just didn't
notice it until we started preventing them from being used until init.
It's pretty impressive this never caused us any issues before!

So, fix this by initializing our i2c pad and busses during subdev
pre-init. We skip initializing aux busses during pre-init, as those are
guaranteed to only ever be used by nouveau for DP aux transactions.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Tested-by: NMarc Meledandri <m.meledandri@gmail.com>
Fixes: 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()")
Cc: stable@vger.kernel.org
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Regs seem valid here still, and tested on TU116.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Modesetting only, still waiting on ACR/GR firmware from NVIDIA for Turing
graphics/compute bring-up.

Each subsystem was compared with traces, along with various tests to check
that things generally work as they should, and appears compatible enough
with the current TU117 code to enable support.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The fallthrough cases (pre-Fermi) would accidentally allow dual-link pixel
clocks even where they shouldn't be.  This leads to a high resolution HDMI
displays, connected via a DVI->HDMI adapter, to fail on the original NV50.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Previously center scaling would get scaling applied to it (when it was
only supposed to center the image), and aspect-corrected scaling did not
always correctly pick whether to reduce width or height for a particular
combination of inputs/outputs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Higher layers tend to add a lot of modes not actually in the EDID, such
as the standard DMT modes. Changing this would be extremely intrusive to
everyone, so just force the scaler more often. There are no practical
cases we're aware of where a LVDS/eDP panel has multiple resolutions
exposed, and i915 already does it this way.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fix a crash or broken depth testing in all OpenGL applications that use the
depth buffer on MCP89 (GeForce 320M) seen on a MacBook Pro Late 2010.

The bug is tracked in https://bugs.freedesktop.org/show_bug.cgi?id=108500Signed-off-by: NTimo Wiren <timo.wiren@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In case of error, the function of_get_mac_address() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Fixes: d51b6ce4 ("net: ethernet: add ag71xx driver")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return error code -ENOMEM from the dmam_alloc_coherent() error
handling case instead of 0, as done elsewhere in this function.

Fixes: d51b6ce4 ("net: ethernet: add ag71xx driver")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range.  This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.

On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.

The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:

    $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
    248

Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.

This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:

    # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
    add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
    Data                                         old     new   delta
    sysctl_vals                                    -      12     +12
    __kstrtab_sysctl_vals                          -      12     +12
    max                                           14      10      -4
    int_max                                       16       -     -16
    one                                           68       -     -68
    zero                                         128      28    -100
    Total: Before=20583249, After=20583085, chg -0.00%

[mcroce@redhat.com: tipc: remove two unused variables]
  Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
  Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.comSigned-off-by: NMatteo Croce <mcroce@redhat.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that the mm core supports section-unaligned hotplug of ZONE_DEVICE
memory, we no longer need to add padding at pfn/dax device creation
time.  The kernel will still honor padding established by older kernels.

Link: http://lkml.kernel.org/r/156092356588.979959.6793371748950931916.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Reported-by: NJeff Moyer <jmoyer@redhat.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At namespace creation time there is the potential for the "expected to
be zero" fields of a 'pfn' info-block to be filled with indeterminate
data.  While the kernel buffer is zeroed on allocation it is immediately
overwritten by nd_pfn_validate() filling it with the current contents of
the on-media info-block location.  For fields like, 'flags' and the
'padding' it potentially means that future implementations can not rely on
those fields being zero.

In preparation to stop using the 'start_pad' and 'end_trunc' fields for
section alignment, arrange for fields that are not explicitly
initialized to be guaranteed zero.  Bump the minor version to indicate
it is safe to assume the 'padding' and 'flags' are zero.  Otherwise,
this corruption is expected to benign since all other critical fields
are explicitly initialized.

Note The cc: stable is about spreading this new policy to as many
kernels as possible not fixing an issue in those kernels.  It is not
until the change titled "libnvdimm/pfn: Stop padding pmem namespaces to
section alignment" where this improper initialization becomes a problem.
So if someone decides to backport "libnvdimm/pfn: Stop padding pmem
namespaces to section alignment" (which is not tagged for stable), make
sure this pre-requisite is flagged.

Link: http://lkml.kernel.org/r/156092356065.979959.6681003754765958296.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 32ab0a3f ("libnvdimm, pmem: 'struct page' for pmem")
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Cc: <stable@vger.kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No longer needed, let's remove it.  Also, drop the "hint" parameter
completely from "find_memory_block_by_id", as nobody needs it anymore.

[david@redhat.com: v3]
  Link: http://lkml.kernel.org/r/20190620183139.4352-7-david@redhat.com
[david@redhat.com: handle zero-length walks]
  Link: http://lkml.kernel.org/r/1c2edc22-afd7-2211-c4c7-40e54e5007e8@redhat.com
Link: http://lkml.kernel.org/r/20190614100114.311-7-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Tested-by: NQian Cai <cai@lca.pw>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let's move walk_memory_blocks() to the place where memory block logic
resides and simplify it.  While at it, add a type for the callback
function.

Link: http://lkml.kernel.org/r/20190614100114.311-6-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

walk_memory_range() was once used to iterate over sections.  Now, it
iterates over memory blocks.  Rename the function, fixup the
documentation.

Also, pass start+size instead of PFNs, which is what most callers
already have at hand.  (we'll rework link_mem_sections() most probably
soon)

Follow-up patches will rework, simplify, and move walk_memory_blocks()
to drivers/base/memory.c.

Note: walk_memory_blocks() only works correctly right now if the
start_pfn is aligned to a section start.  This is the case right now,
but we'll generalize the function in a follow up patch so the semantics
match the documentation.

[akpm@linux-foundation.org: remove unused variable]
Link: http://lkml.kernel.org/r/20190614100114.311-5-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is only used internally.

Link: http://lkml.kernel.org/r/20190614100114.311-4-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>