* acpi-ec:
  ACPI / EC: Fix regression related to PM ops support in ECDT device

On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT
EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an
ACPI device. Thus the following commit actually removed post-resume
acpi_ec_enable_event() invocation for such platforms, and triggered a
regression on them that after being resumed, EC (actually should be ECDT)
driver stops handling EC events:

 Commit: c2b46d67
 Subject: ACPI / EC: Add PM operations to improve event handling for resume process

Notice that the root cause actually is "ECDT is not an ACPI device" rather
than "the timing of acpi_ec_enable_event() invocation", this patch fixes
this issue by enumerating ECDT EC as an ACPI device. Due to the existence
of the noirq stage, the ability of tuning the timing of
acpi_ec_enable_event() invocation is still meaningful.

This patch is a little bit different from the posted fix by moving
acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make
sure that EC event handling won't be stopped as long as the ACPI EC driver
is bound. Thus the following sequence shouldn't disable EC event handling:
unbind,suspend,resume,bind.

Fixes: c2b46d67 (ACPI / EC: Add PM operations to improve event handling for resume process)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847Reported-by: NLuya Tshimbalanga <luya@fedoraproject.org>
Tested-by: NLuya Tshimbalanga <luya@fedoraproject.org>
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Most Bay and Cherry Trail devices use a generic DSDT with all possible
peripheral devices present in the DSDT, with their _STA returning 0x00 or
0x0f based on AML variables which describe what is actually present on
the board.

Since ACPI device objects with a 0x00 status (not present) still get an
entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID
modalias, userspace would end up loading modules for non present hardware.

This commit fixes this by leaving the modalias empty for non present
devices. This results in 10 modules less being loaded with a generic
distro kernel config on my Cherry Trail test-device (a GPD pocket).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull ACPI fix from Rafael Wysocki:
 "This fixes a possible memory leak in an error code path in one of the
  utility routines (Xiongfeng Wang)"

* tag 'acpi-fix-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / utils: Fix memory leak in acpi_evaluate_reference() error path

Pull two power management fixes from Rafael Wysocki:
 "This is the change making /proc/cpuinfo on x86 report current CPU
  frequency in "cpu MHz" again in all cases and an additional one
  dealing with an overzealous check in one of the helper routines in the
  runtime PM framework"

* tag 'pm-fixes-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / runtime: Drop children check from __pm_runtime_set_status()
  x86 / CPU: Always show current CPU frequency in /proc/cpuinfo

Pull amdgpu DC display code for Vega from Dave Airlie:
 "This is the pull request for the AMD DC (display code) layer which is
  a requirement to program the display engines on the new Vega and Raven
  based GPUs. It also contains support for all amdgpu supported GPUs
  (CIK, VI, Polaris), which has to be enabled. It is also a kms atomic
  modesetting compatible driver (unlike the current in-tree display
  code).

  I've kept it separate from drm-next because it may have some things
  that cause you to reject it.

  Background story:

  AMD have an internal team creating a shared OS codebase for display at
  hw bring up time using information from their hardware teams. This
  process doesn't lead to the most Linux friendly/looking code but we
  have worked together on cleaning a lot of it up and dealing with
  sparse/smatch/checkpatch, and having their team internally adhere to
  Linux coding standards.

  This tree is a complete history rebased since they started opening it,
  we decided not to squash it down as the history may have some value.
  Some of the commits therefore might not reach kernel standards, and we
  are steadily training people in AMD to better write commit msgs.

  There is a major bunch of generated bandwidth calculation and
  verification code that comes from their hardware team. On Vega and
  before this is float calculations, on Raven (DCN10) this is double
  based. They do the required things to do FP in the kernel, and I could
  understand this might raise some issues. Rewriting the bandwidth would
  be a major undertaken in reverification, it's non-trivial to work out
  if a display can handle the complete set of mode information thrown at
  it.

  Future story:

  There is a TODO list with this, and it address most of the remaining
  things that would be nice to refine/remove. The DCN10 code is still
  under development internally and they push out a lot of patches quite
  regularly and are supporting this code base with their display team. I
  think we've reached the point where keeping it out of tree is going to
  motivate distributions to start carrying the code, so I'd prefer we
  get it in tree. I think this code is slightly better than STAGING
  quality but not massively so, I'd really like to see that float/double
  magic gone and fixed point used, but AMD don't seem to think the
  accuracy and revalidation of the code is worth the effort"

* tag 'drm-for-v4.15-amd-dc' of git://people.freedesktop.org/~airlied/linux: (1110 commits)
  drm/amd/display: fix MST link training fail division by 0
  drm/amd/display: Fix formatting for null pointer dereference fix
  drm/amd/display: Remove dangling planes on dc commit state
  drm/amd/display: add flip_immediate to commit update for stream
  drm/amd/display: Miss register MST encoder cbs
  drm/amd/display: Fix warnings on S3 resume
  drm/amd/display: use num_timing_generator instead of pipe_count
  drm/amd/display: use configurable FBC option in dm
  drm/amd/display: fix AZ clock not enabled before program AZ endpoint
  amdgpu/dm: Don't use DRM_ERROR in amdgpu_dm_atomic_check
  amd/display: Fix potential null dereference in dce_calcs.c
  amdgpu/dm: Remove unused forward declaration
  drm/amdgpu: Remove unused dc_stream from amdgpu_crtc
  amdgpu/dc: Fix double unlock in amdgpu_dm_commit_planes
  amdgpu/dc: Fix missing null checks in amdgpu_dm.c
  amdgpu/dc: Fix potential null dereferences in amdgpu_dm.c
  amdgpu/dc: fix more indentation warnings
  amdgpu/dc: handle allocation failures in dc_commit_planes_to_stream.
  amdgpu/dc: fix indentation warning from smatch.
  amdgpu/dc: fix non-ansi function decls.
  ...

Pull thermal management updates from Zhang Rui:

 - introduce brcmstb AVS TMON thermal driver (Brian Norris)

 - add Rockchip RV1108 support in rockchip thermal driver (Rocky Hao)

 - major rework on HISI driver plus additional support of hisi3660
   (Daniel Lezcano)

 - add nvmem-cells binding on imx6sx (Leonard Crestez)

 - fix a NULL pointer dereference on ti thermal driver unloading (Tony
   Lindgren)

 - improve tmon tool to make it easier to cross-compile tmon (Markus
   Mayer)

 - add Coffee Lake and Cannon Lake support for intel processor and pch
   thermal drivers (Srinivas Pandruvada)

 - other small fixes and cleanups (Arvind Yadav, Colin Ian King, Allen
   Wild, Nicolin Chen, Baruch SiachNiklas Söderlund, Arnd Bergmann)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (44 commits)
  thermal: pch: Add Cannon Lake support
  thermal: int340x: processor_thermal: Add Coffee Lake support
  thermal: int340x: processor_thermal: Add Cannon Lake support
  thermal: bxt: remove redundant variable trip
  thermal: cpu_cooling: pr_err() strings should end with newlines
  thermal: add brcmstb AVS TMON driver
  Documentation: devicetree: add binding for Broadcom STB AVS TMON
  thermal/drivers/hisi: Add support for hi3660 SoC
  thermal/drivers/hisi: Prepare to add support for other hisi platforms
  thermal/drivers/hisi: Add platform prefix to function name
  thermal/drivers/hisi: Put platform code together
  thermal/drivers/qcom-spmi: Use devm_iio_channel_get
  thermal/drivers/generic-iio-adc: Switch tz request to devm version
  thermal/drivers/step_wise: Fix temperature regulation misbehavior
  thermal/drivers/hisi: Use round up step value
  thermal/drivers/hisi: Move the clk setup in the corresponding functions
  thermal/drivers/hisi: Remove mutex_lock in the code
  thermal/drivers/hisi: Remove thermal data back pointer
  thermal/drivers/hisi: Convert long to int
  thermal/drivers/hisi: Rename and remove unused field
  ...

Pull parisc updates from Helge Deller:
 "Highlights:

   - one important fix from Dave to prevent kernel crash when userspace
     hands over invalid values to our in-kernel CAS implementation.

   - added CPU topology support, including multi-core scheduler support
     on PA8900 CPUs

  Minor changes:

   - minor fixes for sparse (from Luc)

   - drop duplicates for CPU_BIG_ENDIAN from parisc and sparc top
     Kconfig files (from Babu)

   - reorganized parisc PDC (firmware-access) header files for usage
     from userspace. Required for upcoming qemu parisc emulator and
     SeaBIOS fork to support parisc"

* 'parisc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  arch: Fix duplicates in Kconfig for parisc and sparc
  parisc: Make some PDC structures accessible in uapi headers
  parisc: Pass endianness info to sparse
  parisc: Add CPU topology support
  parisc: Fix validity check of pointer size argument in new CAS implementation

Pull second round of s390 updates from Martin Schwidefsky:

 - rework of the vdso code to avoid the use of the access register mode

 - use perf AUX buffers for the transport of diagnostic sample data

 - add perf_regs and user stack dump support

 - enable perf call graphs for user space programs

 - add perf register support for floating-point registers

 - all remaining s390 related timer_setup conversions

 - bug fixes and cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (30 commits)
  s390: remove unused parameter from Makefile
  zfcp: purely mechanical update using timer API, plus blank lines
  s390/scsi: Convert timers to use timer_setup()
  s390/cpum_sf: correctly set the PID and TID in perf samples
  s390/cpum_sf: load program parameter at sampler enablement
  s390/perf: add perf register support for floating-point registers
  s390/perf: extend perf_regs support to include floating-point registers
  s390/perf: define common DWARF register string table
  s390/perf: add support for perf_regs and libdw
  s390/perf: add perf_regs support and user stack dump
  s390/cpum_sf: do not register PMU if no sampling mode is authorized
  s390/cpumf: remove raw event support in basic-only sampling mode
  s390/perf: add callback to perf to enable using AUX buffer
  s390/cpumf: enable using AUX buffer
  s390/cpumf: introduce AUX buffer for dump diagnostic sample data
  s390/disassembler: increase show_code buffer size
  s390: Remove CONFIG_HARDENED_USERCOPY
  s390: enable CPU alternatives unconditionally
  s390/nmi: remove unused code
  s390/mm: remove unused code
  ...

Pull NFS client updates from Anna Schumaker:
 "Stable bugfixes:
   - Revalidate "." and ".." correctly on open
   - Avoid RCU usage in tracepoints
   - Fix ugly referral attributes
   - Fix a typo in nomigration mount option
   - Revert "NFS: Move the flock open mode check into nfs_flock()"

  Features:
   - Implement a stronger send queue accounting system for NFS over RDMA
   - Switch some atomics to the new refcount_t type

  Other bugfixes and cleanups:
   - Clean up access mode bits
   - Remove special-case revalidations in nfs_opendir()
   - Improve invalidating NFS over RDMA memory for async operations that
     time out
   - Handle NFS over RDMA replies with a worqueue
   - Handle NFS over RDMA sends with a workqueue
   - Fix up replaying interrupted requests
   - Remove dead NFS over RDMA definitions
   - Update NFS over RDMA copyright information
   - Be more consistent with bool initialization and comparisons
   - Mark expected switch fall throughs
   - Various sunrpc tracepoint cleanups
   - Fix various OPEN races
   - Fix a typo in nfs_rename()
   - Use common error handling code in nfs_lock_and_join_request()
   - Check that some structures are properly cleaned up during
     net_exit()
   - Remove net pointer from dprintk()s"

* tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (62 commits)
  NFS: Revert "NFS: Move the flock open mode check into nfs_flock()"
  NFS: Fix typo in nomigration mount option
  nfs: Fix ugly referral attributes
  NFS: super: mark expected switch fall-throughs
  sunrpc: remove net pointer from messages
  nfs: remove net pointer from messages
  sunrpc: exit_net cleanup check added
  nfs client: exit_net cleanup check added
  nfs/write: Use common error handling code in nfs_lock_and_join_requests()
  NFSv4: Replace closed stateids with the "invalid special stateid"
  NFSv4: nfs_set_open_stateid must not trigger state recovery for closed state
  NFSv4: Check the open stateid when searching for expired state
  NFSv4: Clean up nfs4_delegreturn_done
  NFSv4: cleanup nfs4_close_done
  NFSv4: Retry NFS4ERR_OLD_STATEID errors in layoutreturn
  pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-close
  NFSv4: Don't try to CLOSE if the stateid 'other' field has changed
  NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.
  NFS: Fix a typo in nfs_rename()
  NFSv4: Fix open create exclusive when the server reboots
  ...

Merge tag 'ecryptfs-4.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull eCryptfs updates from Tyler Hicks:

 - miscellaneous code cleanups and refactoring

 - fix a possible use after free bug when unloading the module

* tag 'ecryptfs-4.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: constify attribute_group structures.
  ecryptfs: remove unnecessary i_version bump
  ecryptfs: use ARRAY_SIZE
  ecryptfs: Adjust four checks for null pointers
  ecryptfs: Return an error code only as a constant in ecryptfs_add_global_auth_tok()
  ecryptfs: Delete 21 error messages for a failed memory allocation
  eCryptfs: use after free in ecryptfs_release_messaging()
  ecryptfs: remove private bin2hex implementation
  ecryptfs: add missing \n to end of various error messages

Pull xfs fixes from Darrick Wong:
 "A couple more patches to fix a locking bug and some inconsistent type
  usage in some of the new code:

   - Fix a forgotten rcu read unlock

   - Fix some inconsistent integer type usage"

* tag 'xfs-4.15-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix type usage
  xfs: fix forgotten rcu read unlock when skipping inode reclaim

Commit e1293727 "NFS: Move the flock open mode check into nfs_flock()"
changed NFSv3 behavior for flock() such that the open mode must match the
lock type, however that requirement shouldn't be enforced for flock().
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # v4.12
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The option was incorrectly masking off all other options.
Signed-off-by: NJoshua Watt <JPEWhacker@gmail.com>
Cc: stable@vger.kernel.org #3.7
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Before traversing a referral and performing a mount, the mounted-on
directory looks strange:

dr-xr-xr-x. 2 4294967294 4294967294 0 Dec 31  1969 dir.0

nfs4_get_referral is wiping out any cached attributes with what was
returned via GETATTR(fs_locations), but the bit mask for that
operation does not request any file attributes.

Retrieve owner and timestamp information so that the memcpy in
nfs4_get_referral fills in more attributes.

Changes since v1:
- Don't request attributes that the client unconditionally replaces
- Request only MOUNTED_ON_FILEID or FILEID attribute, not both
- encode_fs_locations() doesn't use the third bitmask word

Fixes: 6b97fd3d ("NFSv4: Follow a referral")
Suggested-by: NPradeep Thomas <pradeepthomas@gmail.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 703509
Addresses-Coverity-ID: 703510
Addresses-Coverity-ID: 703511
Addresses-Coverity-ID: 703512
Addresses-Coverity-ID: 703513
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Publishing of net pointer is not safe, use net->ns.inum as net ID
[  171.391947] RPC:       created new rpcb local clients
    (rpcb_local_clnt: ..., rpcb_local_clnt4: ...) for net f00001e7
[  171.767188] NFSD: starting 90-second grace period (net f00001e7)
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Publishing of net pointer is not safe,
use net->ns.inum instead
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Be sure that all_clients list initialized in net_init hook was return
to initial state.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Be sure that nfs_client_list and nfs_volume_list lists initialized
in net_init hook were return to initial state in net_exit hook.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

When decoding a CLOSE, replace the stateid returned by the server
with the "invalid special stateid" described in RFC5661, Section 8.2.3.

In nfs_set_open_stateid_locked, ignore stateids from closed state.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

In nfs_set_open_stateid_locked, we must ignore stateids from closed state.
Reported-by: NAndrew W Elble <aweits@rit.edu>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If our layoutreturn returns an NFS4ERR_OLD_STATEID, then try to
update the stateid and retry.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If our layoutreturn on close operation returns an NFS4ERR_OLD_STATEID,
then try to update the stateid and retry. We know that there should
be no further LAYOUTGET requests being launched.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If the stateid is no longer recognised on the server, either due to a
restart, or due to a competing CLOSE call, then we do not have to
retry. Any open contexts that triggered a reopen of the file, will
also act as triggers for any CLOSE for the updated stateids.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If we're racing with an OPEN, then retry the operation instead of
declaring it a success.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
[Andrew W Elble: Fix a typo in nfs4_refresh_open_stateid]
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

On successful rename, the "old_dentry" is retained and is attached to
the "new_dir", so we need to call nfs_set_verifier() accordingly.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If the server that does not implement NFSv4.1 persistent session
semantics reboots while we are performing an exclusive create,
then the return value of NFS4ERR_DELAY when we replay the open
during the grace period causes us to lose the verifier.
When the grace period expires, and we present a new verifier,
the server will then correctly reply NFS4ERR_EXIST.

This commit ensures that we always present the same verifier when
replaying the OPEN.
Reported-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Ben Coddington has noted the following race between OPEN and CLOSE
on a single client.

Process 1		Process 2		Server
=========		=========		======

1)  OPEN file
2)			OPEN file
3)						Process OPEN (1) seqid=1
4)						Process OPEN (2) seqid=2
5)						Reply OPEN (2)
6)			Receive reply (2)
7)			new stateid, seqid=2

8)			CLOSE file, using
			stateid w/ seqid=2
9)						Reply OPEN (1)
10(						Process CLOSE (8)
11)						Reply CLOSE (8)
12)						Forget stateid
						file closed

13)			Receive reply (7)
14)			Forget stateid
			file closed.

15) Receive reply (1).
16) New stateid seqid=1
    is really the same
    stateid that was
    closed.

IOW: the reply to the first OPEN is delayed. Since "Process 2" does
not wait before closing the file, and it does not cache the closed
stateid, then when the delayed reply is finally received, it is treated
as setting up a new stateid by the client.

The fix is to ensure that the client processes the OPEN and CLOSE calls
in the same order in which the server processed them.

This commit ensures that we examine the seqid of the stateid
returned by OPEN. If it is a new stateid, we assume the seqid
must be equal to the value 1, and that each state transition
increments the seqid value by 1 (See RFC7530, Section 9.1.4.2,
and RFC5661, Section 8.2.2).

If the tracker sees that an OPEN returns with a seqid that is greater
than the cached seqid + 1, then it bumps a flag to ensure that the
caller waits for the RPCs carrying the missing seqids to complete.

Note that there can still be pathologies where the server crashes before
it can even send us the missing seqids. Since the OPEN call is still
holding a slot when it waits here, that could cause the recovery to
stall forever. To avoid that, we time out after a 5 second wait.
Reported-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Display information about the RPC procedure being requested in the
trace log. This sometimes critical information cannot always be
derived from other RPC trace entries.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The rpc_task_begin trace point always display a task ID of zero.
Move the trace point call site so that it picks up the new task ID.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

mount.nf-11159   8....   905.248380: xprt_transmit:        [FAILED TO PARSE] xid=351291440 status=0 addr=192.168.2.5 port=20049
mount.nf-11159   8....   905.248381: rpc_task_sleep:       task:6210@1 flags=0e80 state=0005 status=0 timeout=60000 queue=xprt_pending
kworker/-1591    1....   905.248419: xprt_lookup_rqst:     [FAILED TO PARSE] xid=351291440 status=0 addr=192.168.2.5 port=20049
kworker/-1591    1....   905.248423: xprt_complete_rqst:   [FAILED TO PARSE] xid=351291440 status=24 addr=192.168.2.5 port=20049

Byte swapping is not available during trace-cmd report.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

There isn't an obvious way to acquire and release the RCU lock during a
tracepoint, so we can't use the rpc_peeraddr2str() function here.
Instead, rely on the client's cl_hostname, which should have similar
enough information without needing an rcu_dereference().
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Cc: stable@vger.kernel.org # v3.12
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>