Otherwise you could run into:
WARN_ON in numa_register_memblks(), because node_possible_map is zero

References: https://bugzilla.novell.com/show_bug.cgi?id=757888

On this machine (ProLiant ML570 G3) the SRAT table contains:
  - No processor affinities
  - One memory affinity structure (which is set disabled)

CC: Per Jessen <per@opensuse.org>
CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Commit b2da15ac ("KVM: VMX: Optimize %ds, %es reload") broke i386
in the following scenario:

  vcpu_load
  ...
  vmx_save_host_state
  vmx_vcpu_run
  (ds.rpl, es.rpl cleared by hardware)

  interrupt
    push ds, es  # pushes bad ds, es
    schedule
      vmx_vcpu_put
        vmx_load_host_state
          reload ds, es (with __USER_DS)
    pop ds, es  # of other thread's stack
    iret
  # other thread runs
  interrupt
    push ds, es
    schedule  # back in vcpu thread
    pop ds, es  # now with rpl=0
    iret
  ...
  vcpu_put
  resume_userspace
  iret  # clears ds, es due to mismatched rpl

(instead of resume_userspace, we might return with SYSEXIT and then
take an exception; when the exception IRETs we end up with cleared
ds, es)

Fix by avoiding the optimization on i386 and reloading ds, es on the
lightweight exit path.
Reported-by: NChris Clayron <chris2553@googlemail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We already use the same system call handler for i386 and x86-64, there
is absolutely no reason x32 can't use the same system call, too.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: <stable@vger.kernel.org> v3.5
Link: http://lkml.kernel.org/n/tip-vwzk3qbcr3yjyxjg2j38vgy9@git.kernel.org

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

When a guest migrates to a new host, the system time difference from the
previous host is used in the updates to the kvmclock system time visible
to the guest, resulting in a continuation of correct kvmclock based guest
timekeeping.

The wall clock component of the kvmclock provided time is currently not
updated with this same time offset. Since the Linux guest caches the
wall clock based time, this discrepency is not noticed until the guest is
rebooted. After reboot the guest's time calculations are off.

This patch adjusts the wall clock by the kvmclock_offset, resulting in
correct guest time after a reboot.

Cc: Zachary Amsden <zamsden@gmail.com>
Signed-off-by: NBruce Rogers <brogers@suse.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The new EC driver calls platform-specific suspend and resume hooks; run
XO-1-specific EC commands from there, rather than deep in s/r code.  If we
attempt to run EC commands after the new EC driver has suspended, it is
refused by the ec->suspended checks.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

There's nothing about the debugfs interface for the EC driver that is
architecture-specific, so move it into the arch-independent driver.

The code is mostly unchanged with the exception of renamed variables, coding
style changes, and API updates.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

This uses the new EC driver framework in drivers/platform/olpc.  The
XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff
(including a new workqueue; no more running EC commands with IRQs disabled!)
can be shared with other architectures.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Switch over to using olpc-ec.h in multiple steps, so as not to break builds.
This covers every driver that calls olpc_ec_cmd().
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

The OLPC EC driver has outgrown arch/x86/platform/.  It's time to both
share common code amongst different architectures, as well as move it out
of arch/x86/.  The XO-1.75 is ARM-based, and the EC driver shares a lot of
code with the x86 code.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Some PMUs don't provide a full register set for their sample,
specifically 'advanced' PMUs like AMD IBS and Intel PEBS which provide
'better' than regular interrupt accuracy.

In this case we use the interrupt regs as basis and over-write some
fields (typically IP) with different information.

The perf core however uses user_mode() to distinguish user/kernel
samples, user_mode() relies on regs->cs. If the interrupt skid pushed
us over a boundary the new IP might not be in the same domain as the
interrupt.

Commit ce5c1fe9 ("perf/x86: Fix USER/KERNEL tagging of samples")
tried to fix this by making the perf core use kernel_ip(). This
however is wrong (TM), as pointed out by Linus, since it doesn't allow
for VM86 and non-zero based segments in IA32 mode.

Therefore, provide a new helper to set the regs->ip field,
set_linear_ip(), which massages the regs into a suitable state
assuming the provided IP is in fact a linear address.

Also modify perf_instruction_pointer() and perf_callchain_user() to
deal with segments base offsets.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1341910954.3462.102.camel@twinsSigned-off-by: NIngo Molnar <mingo@kernel.org>

i386 allmodconfig:

 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_hrtimer':
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:728: warning: integer overflow in expression
 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_start_hrtimer':
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:735: warning: integer overflow in expression
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-h84qlqj02zrojmxxybzmy9hi@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

ACPI/x86: revert 'x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler'

cd74257b
patched up GTS/BFS -- a feature we want to remove.
So revert it (by hand, due to conflict in sleep.h)
to prepare for GTS/BFS removal.
Signed-off-by: NLen Brown <len.brown@intel.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Rather than #define the options manually in the architecture code, add
Kconfig options for them and select them there instead.  This also allows
us to select the compat IPC version parsing automatically for platforms
using the old compat IPC interface.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two ways to create /sys/firmware/memmap/X sysfs:

  - firmware_map_add_early
    When the system starts, it is calledd from e820_reserve_resources()
  - firmware_map_add_hotplug
    When the memory is hot plugged, it is called from add_memory()

But these functions are called without unifying value of end argument as
below:

  - end argument of firmware_map_add_early()   : start + size - 1
  - end argument of firmware_map_add_hogplug() : start + size

The patch unifies them to "start + size".  Even if applying the patch,
/sys/firmware/memmap/X/end file content does not change.

[akpm@linux-foundation.org: clarify comments]
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: NDave Hansen <dave@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE and use this instead
of the multitude of #if defined() checks in atomic64_test.c
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Typically, the return value desired for the failure of a
function with an integer return value is a negative integer.  In
these cases, the return value is sometimes a negative integer
and sometimes 0, due to a subsequent initialization of the
return variable within the loop.

A simplified version of the semantic match that finds this
problem is: (http://coccinelle.lip6.fr/)

//<smpl>
@r exists@
identifier ret;
position p;
constant C;
expression e1,e3,e4;
statement S;
@@

ret = -C
... when != ret = e3
    when any
if@p (...) S
... when any
if (\(ret != 0\|ret < 0\|ret > 0\) || ...) { ... return ...; }
... when != ret = e3
    when any
*if@p (...)
{
  ... when != ret = e4
  return ret;
}
//</smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Link: http://lkml.kernel.org/r/1342284188-19176-7-git-send-email-Julia.Lawall@lip6.frSigned-off-by: NIngo Molnar <mingo@kernel.org>

Sandy Bridge processors follow the SDM (Vol 3B, Table 15-20) and
set both the RIPV and EIPV bits in the MCG_STATUS register to
zero for machine checks during instruction fetch. This is more
than a little counter-intuitive and means that Linux cannot
recover from these errors. Rather than insert special case code
at several places in mce.c and mce-severity.c, we pretend the
EIPV bit was set for just this case early in processing the
machine check.
Acked-by: NBorislav Petkov <bp@amd64.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/180a06f3f357cf9f78259ae443a082b14a29535b.1343078495.git.tony.luck@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We will need some of these values in mce.c. Move them to the
appropriate header file so they are available.
Acked-by: NBorislav Petkov <bp@amd64.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/0ccfb1af5fe35e537b7cd8e4d448bf7d851dbfb9.1343078495.git.tony.luck@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When CONFIG_PERF_EVENTS disabled, there will have a compiliation
error, because missing struct before structure name.
Signed-off-by: NJovi Zhang <bookjovi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <trivial@kernel.org>
Link: http://lkml.kernel.org/r/CACV3sbKF%3DCX%2B2jWEWesfCA6rBoQ3wDM4-5ac9MuBtVbCtMRHdQ@mail.gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

In the current kernel, percpu variable `vector_irq' is not always
cleared when a CPU is offlined. If the CPU that has the disabled
irqs in vector_irq is hotplugged again, __setup_vector_irq()
hits invalid irq vector and may crash.

This bug can be reproduced as following;

 # echo 0 > /sys/devices/system/cpu/cpu7/online
 # modprobe -r some_driver_using_interrupts     # vector_irq@cpu7 uncleared
 # echo 1 > /sys/devices/system/cpu/cpu7/online # kernel may crash

To fix this problem, this patch clears vector_irq in
__fixup_irqs() when the CPU is offlined.

This also reverts commit f6175f5b, which partially fixes
this bug by clearing vector in __clear_irq_vector(). But in
environments with IOMMU IRQ remapper, it could fail because
cfg->domain doesn't contain offlined CPUs. With this patch, the
fix in __clear_irq_vector() can be reverted because every
vector_irq is already cleared in __fixup_irqs() on offlined CPUs.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/20120726104732.2889.19144.stgit@kvmdevSigned-off-by: NIngo Molnar <mingo@kernel.org>

The event control register of SNB-EP uncore QPI box has a one bit
extension at bit position 21.
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1343097850-4348-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix:

 arch/x86/kernel/cpu/perf_event.h:377:43: sparse: dubious one-bit signed bitfield

Cc: Borislav Petkov <bp@amd64.org>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-2jxkmktkppkclj1qe6qxd7ah@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

LLC-* and node-* events require using the OFFCORE_RESPONSE events
on SandyBridge, but the hw_cache_extra_regs is left uninitialized.
This patch adds the missing extra register configure table for
SandyBridge.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342517275-2875-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The uncore subsystem in Nehalem-EX consists of 7 components
(U-Box, C-Box, B-Box, S-Box, R-Box, M-Box and W-Box). This
patch is large because the way to program these boxes is
diverse.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FF534F1.3030307@intel.com
[ Improved the code. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The format definition of uncore PCU filter should be filter_band*
instead of filter_brand*.
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1343024611-4692-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

After commit 242ec97c PIT interrupts are no longer delivered after
PIC reset. It happens because PIT injects interrupt only if previous one
was acked, but since on PIC reset it is dropped from irr it will never
be delivered and hence acknowledged. Fix that by calling ack notifier on
PIC reset.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The Intel case falls through into the generic case which then changes
the values.  For cases like the P6 it doesn't do the right thing so
this seems to be a screwup.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-lww2uirad4skzjlmrm0vru8o@git.kernel.orgSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>

The x86 sched power implementation has been broken forever and gets in
the way of other stuff, remove it.

[ For archaeological interest, fixing this code would require dealing
  with the cross-cpu calling of these functions and more importantly, we
  need to filter idle time out of the a/m-perf stuff because the ratio
  will go down to 0 when idle, giving a 0 capacity which is not what
  we'd want. ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Link: http://lkml.kernel.org/r/1339594110.8980.38.camel@twinsSigned-off-by: NIngo Molnar <mingo@kernel.org>

This reverts commit fbd24153.

This commit is subtly buggy: kstrto*int() can return an error but
it's not checked in every path. simple_strtoul() on the other hand
could not fail, so this patch subtly intruduces new failure modes.
Signed-off-by: NShuah Khan <shuahkhan@gmail.com>
Link: http://lkml.kernel.org/r/1338424803.3569.5.camel@lorien2Signed-off-by: NIngo Molnar <mingo@kernel.org>

CONFIG_EARLY_PRINTK is the only feature that might use command line
parsing in the decompression stage.  If it is disabled then we can
exclude the related code to save space. This can result in an estimated
space savings of 2240 bytes from the compressed kernel image.
Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com>
Link: http://lkml.kernel.org/r/1342746282-28497-8-git-send-email-jmillenbach@gmail.comSigned-off-by: NGokul Caushik <caushik1@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Removes early_serial_console.c code if we don't have the config option that
enables it (EARLY_PRINTK). When disabling this code, make early_serial_base a
constant 0 to allow the compiler to optimize away the code that checks for
early_serial_base.
Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com>
Link: http://lkml.kernel.org/r/1342746282-28497-7-git-send-email-jmillenbach@gmail.comSigned-off-by: NGokul Caushik <caushik1@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

As we're no longer using the flag we don't need to extract the value from the
command line and store it. This is a step towards removing command line
parameter code.
Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com>
Link: http://lkml.kernel.org/r/1342746282-28497-6-git-send-email-jmillenbach@gmail.comSigned-off-by: NGokul Caushik <caushik1@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Changed putstr flagging from parameter to conditional compilation for puts,
debug_putstr, and error_putstr. This allows for space savings since most
configurations won't use this feature.
Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com>
Link: http://lkml.kernel.org/r/1342746282-28497-5-git-send-email-jmillenbach@gmail.comSigned-off-by: NGokul Caushik <caushik1@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

For consistency we changed the error output path to match the new debug path.
Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com>
Link: http://lkml.kernel.org/r/1342746282-28497-4-git-send-email-jmillenbach@gmail.comSigned-off-by: NGokul Caushik <caushik1@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Change all instances of if (debug) putstr(...) to a new debug_putstr(...).
This allows a future change to conditionally stub out debug_putstr to save
space.
Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com>
Link: http://lkml.kernel.org/r/1342746282-28497-3-git-send-email-jmillenbach@gmail.comSigned-off-by: NGokul Caushik <caushik1@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

There are only 3 uses of the quiet flag and they all protect output that
is only useful for debugging the stub, therefore we switched to using the
debug flag for all extra output.
Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com>
Link: http://lkml.kernel.org/r/1342746282-28497-2-git-send-email-jmillenbach@gmail.comSigned-off-by: NGokul Caushik <caushik1@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

As things currently stand, traditional EFI boot loaders and the EFI
boot stub are carrying essentially the same initialisation code
required to setup an EFI machine for booting a kernel. There's really
no need to have this code in two places and the hope is that, with
this new protocol, initialisation and booting of the kernel can be
left solely to the kernel's EFI boot stub. The responsibilities of the
boot loader then become,

   o Loading the kernel image from boot media

File system code still needs to be carried by boot loaders for the
scenario where the kernel and initrd files reside on a file system
that the EFI firmware doesn't natively understand, such as ext4, etc.

   o Providing a user interface

Boot loaders still need to display any menus/interfaces, for example
to allow the user to select from a list of kernels.

Bump the boot protocol number because we added the 'handover_offset'
field to indicate the location of the handover protocol entry point.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Acked-and-Tested-by: NMatthew Garrett <mjg@redhat.com>
Link: http://lkml.kernel.org/r/1342689828-16815-1-git-send-email-matt@console-pimps.orgSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

The incompatible parameter of flush_tlb_mm_range cause build warning.
Fix it by correct parameter.

Ingo Molnar found that this could also cause a user space crash.
Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NAlex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1342747103-19765-1-git-send-email-alex.shi@intel.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Add the RDSEED and ADX features documented in section 9.1 of the Intel
Architecture Instruction Set Extensions Programming Reference,
document 319433, version 013b, available from
http://software.intel.com/en-us/avx/

The PREFETCHW bit is already supported in Linux under the name
3DNOWPREFETCH.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-lgr6482ufk1bvxzvc2hr8qbp@git.kernel.org