- 10 8月, 2011 4 次提交
-
-
由 Jamie Iles 提交于
The completion callback will free the request so we must remove it from the completion list before calling the callback. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jamie Iles 提交于
Allow the crypto engines to be matched from device tree bindings. Cc: devicetree-discuss@lists.ozlabs.org Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jamie Iles 提交于
For using the device tree probing we use a connection ID for the clk_get() operation. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jamie Iles 提交于
Use a platform ID table and a single platform_driver. It's neater and makes the device tree addition easier and more consistent. Rename the match values to be inline with what they'll be in the device tree bindings. There aren't any current in-tree users of the existing device names. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 03 8月, 2011 1 次提交
-
-
由 Jonathan Nieder 提交于
When loading aes via the module alias, a padlock module failing to load due to missing hardware is not particularly notable. With v2.6.27-rc1~1107^2~14 (crypto: padlock - Make module loading quieter when hardware isn't available, 2008-07-03), the padlock-aes module suppresses the relevant messages when the "quiet" flag is in use; but better to suppress this particular message completely, since the administrator can already distinguish such errors by the absence of a message indicating initialization failing or succeeding. This avoids occasional messages in syslog of the form padlock_aes: VIA PadLock not detected. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 02 8月, 2011 20 次提交
-
-
由 Oleg Nesterov 提交于
exit_mm() sets ->mm == NULL then it does mmput()->exit_mmap() which frees the memory. However select_bad_process() checks ->mm != NULL before TIF_MEMDIE, so it continues to kill other tasks even if we have the oom-killed task freeing its memory. Change select_bad_process() to check ->mm after TIF_MEMDIE, but skip the tasks which have already passed exit_notify() to ensure a zombie with TIF_MEMDIE set can't block oom-killer. Alternatively we could probably clear TIF_MEMDIE after exit_mmap(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (23 commits) regulator: Improve WM831x DVS VSEL selection algorithm regulator: Bootstrap wm831x DVS VSEL value from ON VSEL if not already set regulator: Set up GPIO for WM831x VSEL before enabling VSEL mode regulator: Add EPEs to the MODULE_ALIAS() for wm831x-dcdc regulator: Fix WM831x DCDC DVS VSEL bootstrapping regulator: Fix WM831x regulator ID lookups for multiple WM831xs regulator: Fix argument format type errors in error prints regulator: Fix memory leak in set_machine_constraints() error paths regulator: Make core more chatty about some errors regulator: tps65910: Fix array access out of bounds bug regulator: tps65910: Add missing breaks in switch/case regulator: tps65910: Fix a memory leak in tps65910_probe error path regulator: TWL: Remove entry of RES_ID for 6030 macros ASoC: tlv320aic3x: Add correct hw registers to Line1 cross connect muxes regulator: Add basic per consumer debugfs regulator: Add rdev_crit() macro regulator: Refactor supply implementation to work as regular consumers regulator: Include the device name in the microamps_requested_ file regulator: Increase the limit on sysfs file names regulator: Properly register dummy regulator driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits) ext4: prevent memory leaks from ext4_mb_init_backend() on error path ext4: use EXT4_BAD_INO for buddy cache to avoid colliding with valid inode # ext4: use ext4_msg() instead of printk in mballoc ext4: use ext4_kvzalloc()/ext4_kvmalloc() for s_group_desc and s_group_info ext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and ext4_kvfree() ext4: use the correct error exit path in ext4_init_inode_table() ext4: add missing kfree() on error return path in add_new_gdb() ext4: change umode_t in tracepoint headers to be an explicit __u16 ext4: fix races in ext4_sync_parent() ext4: Fix overflow caused by missing cast in ext4_fallocate() ext4: add action of moving index in ext4_ext_rm_idx for Punch Hole ext4: simplify parameters of reserve_backup_gdb() ext4: simplify parameters of add_new_gdb() ext4: remove lock_buffer in bclean() and setup_new_group_blocks() ext4: simplify journal handling in setup_new_group_blocks() ext4: let setup_new_group_blocks() set multiple bits at a time ext4: fix a typo in ext4_group_extend() ext4: let ext4_group_add_blocks() handle 0 blocks quickly ext4: let ext4_group_add_blocks() return an error code ext4: rename ext4_add_groupblocks() to ext4_group_add_blocks() ... Fix up conflict in fs/ext4/inode.c: commit aacfc19c ("fs: simplify the blockdev_direct_IO prototype") had changed the ext4_ind_direct_IO() function for the new simplified calling convention, while commit dae1e52c ("ext4: move ext4_ind_* functions from inode.c to indirect.c") moved the function to another file.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set VFS: Reorganise shrink_dcache_for_umount_subtree() after demise of dcache_lock VFS: Remove dentry->d_lock locking from shrink_dcache_for_umount_subtree() VFS: Remove detached-dentry counter from shrink_dcache_for_umount_subtree() switch posix_acl_chmod() to umode_t switch posix_acl_from_mode() to umode_t switch posix_acl_equiv_mode() to umode_t * switch posix_acl_create() to umode_t * block: initialise bd_super in bdget() vfs: avoid call to inode_lru_list_del() if possible vfs: avoid taking inode_hash_lock on pipes and sockets vfs: conditionally call inode_wb_list_del() VFS: Fix automount for negative autofs dentries Btrfs: load the key from the dir item in readdir into a fake dentry devtmpfs: missing initialialization in never-hit case hppfs: missing include
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (37 commits) Improve slave/cyclic DMA engine documentation dmaengine: pl08x: handle the rest of enums in pl08x_width DMA: PL08x: cleanup selection of burst size DMA: PL08x: avoid recalculating cctl at each prepare DMA: PL08x: cleanup selection of buswidth DMA: PL08x: constify plchan->cd and plat->slave_channels DMA: PL08x: separately store source/destination cctl DMA: PL08x: separately store source/destination slave address DMA: PL08x: clean up LLI debugging DMA: PL08x: select LLI bus only once per LLI setup DMA: PL08x: remove unused constants ARM: mxs-dma: reset after disable channel dma: intel_mid_dma: remove redundant pci_set_drvdata calls dma: mxs-dma: fix unterminated platform_device_id table dmaengine: pl330: make platform data optional dmaengine: imx-sdma: return proper error if kzalloc fails pch_dma: Fix CTL register access issue dmaengine: mxs-dma: skip request_irq for NO_IRQ dmaengine/coh901318: fix slave submission semantics dmaengine/ste_dma40: allow memory buswidth/burst to be configured ... Fix trivial whitespace conflict in drivers/dma/mv_xor.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'gpiolib' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Hook up gpiolib support
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'pstore-efi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: efivars: Introduce PSTORE_EFI_ATTRIBUTES efivars: Use string functions in pstore_write efivars: introduce utf16_strncmp efivars: String functions efi: Add support for using efivars as a pstore backend pstore: Allow the user to explicitly choose a backend pstore: Make "part" unsigned pstore: Add extra context for writes and erases pstore: Extend API for more flexibility in new backends
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kdb,kgdb: Allow arbitrary kgdb magic knock sequences kdb: Remove all references to DOING_KGDB2 kdb,kgdb: Implement switch and pass buffer from kdb -> gdb kdb: cleanup unused variables missed in the original kdb merge
-
由 Yu Jian 提交于
In ext4_mb_init(), if the s_locality_group allocation fails it will currently cause the allocations made in ext4_mb_init_backend() to be leaked. Moving the ext4_mb_init_backend() allocation after the s_locality_group allocation avoids that problem. Signed-off-by: NYu Jian <yujian@whamcloud.com> Signed-off-by: NAndreas Dilger <adilger@whamcloud.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Yu Jian 提交于
Signed-off-by: NYu Jian <yujian@whamcloud.com> Signed-off-by: NAndreas Dilger <adilger@whamcloud.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Jason Wessel 提交于
The first packet that gdb sends when the kernel is in kdb mode seems to change with every release of gdb. Instead of continuing to add many different gdb packets, change kdb to automatically look for any thing that looks like a gdb packet. Example 1 cold start test: echo g > /proc/sysrq-trigger $D#44+ Example 2 cold start test: echo g > /proc/sysrq-trigger $3#33 The second one should re-enter kdb's shell right away and is purely a test. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
The DOING_KGDB2 was originally a state variable for one of the two ways to automatically transition from kdb to kgdb. Purge all these variables and just use one single state for the transition. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
When switching from kdb mode to kgdb mode packets were getting lost depending on the size of the fifo queue of the serial chip. When gdb initially connects if it is in kdb mode it should entirely send any character buffer over to the gdbstub when switching connections. Previously kdb was zero'ing out the character buffer and this could lead to gdb failing to connect at all, or a lengthy pause could occur on the initial connect. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
The BTARGS and BTSYMARG variables do not have any function in the mainline version of kdb. Reported-by: NTim Bird <tim.bird@am.sony.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Liam Girdwood 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: CIFS: Cleanup demupltiplex thread exiting code CIFS: Move mid search to a separate function CIFS: Move RFC1002 check to a separate function CIFS: Simplify socket reading in demultiplex thread CIFS: Move buffer allocation to a separate function cifs: remove unneeded variable initialization in cifs_reconnect_tcon cifs: simplify refcounting for oplock breaks cifs: fix compiler warning in CIFSSMBQAllEAs cifs: fix name parsing in CIFSSMBQAllEAs cifs: don't start signing too early cifs: trivial: goto out here is unnecessary cifs: advertise the right receive buffer size to the server
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers gpio_msm: Move Qualcomm v6 MSM driver into drivers msm: gpio: Fold register defs into C file msm: gpiomux: Move public API to public header msm: gpio: Remove ifdefs on gpio chip registers msm: gpio: Remove chip-specific register definitions msm: Remove chip-ifdefs for GPIO io mappings msm: gpio: Remove unsupported devices gpio: ab8500: fix MODULE_ALIAS for ab8500 of/gpio: export of_gpio_simple_xlate
-
git://gitorious.org/linux-omap-dss2/linux由 Linus Torvalds 提交于
* 'for-3.1-rc1' of git://gitorious.org/linux-omap-dss2/linux: (31 commits) OMAP: DSS2: HDMI: fix hdmi clock name HACK: OMAP: DSS2: clk hack for OMAP2/3 OMAP: DSS2: DSS: Fix context save/restore OMAP: DSS2: DISPC: Fix context save/restore OMAP: DSS2: Remove ctx loss count from dss.c OMAP: DSS2: Remove unused code from display.c OMAP: DSS2: DISPC: remove finegrained clk enables/disables OMAP: DSS2: Remove unused opt_clock_available OMAP: DSS2: Use PM runtime & HWMOD support OMAP: DSS2: Remove CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET OMAP: DSS2: Remove core_dump_clocks OMAP: DSS2: DPI: remove unneeded SYSCK enable/disable OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count OMAP: DSS2: rewrite use of context_loss_count OMAP: DSS2: Remove clk optimization at dss init OMAP: DSS2: Fix init and unit sequence OMAP: DSS2: Clean up probe for DSS & DSI OMAP: DSS2: Handle dpll4_m4_ck in dss_get/put_clocks OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 OMAP: DSS2: DSI: sync when disabling a display ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x由 Linus Torvalds 提交于
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits) SH: static should be at beginning of declaration sh: move CLKDEV_xxx_ID macro to sh_clk.h sh: clock-shx3: add CLKDEV_ICK_ID for cleanup sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: modify I2C clock settings sh: clock-sh7343: modify I2C clock settings sh: clock-sh7723: modify I2C clock settings sh: clock-sh7722: modify I2C clock settings sh: clock-sh7724: modify I2C clock settings serial: sh-sci: Fix up pretty name printing for port IRQs. serial: sh-sci: Kill off per-port enable/disable callbacks. serial: sh-sci: Add missing module description/author bits. serial: sh-sci: Regtype probing doesn't need to be fatal. sh: Tidy up pre-clkdev clk_get() error handling. ...
-
- 01 8月, 2011 15 次提交
-
-
git://codeaurora.org/quic/kernel/davidb/linux-msm由 Grant Likely 提交于
Conflicts: drivers/gpio/Kconfig drivers/gpio/Makefile
-
由 Pavel Shilovsky 提交于
Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Move reading to separate function and remove csocket variable. Also change semantic in a little: goto incomplete_rcv only when we get -EAGAIN (or a familiar error) while reading rfc1002 header. In this case we don't check for echo timeout when we don't get whole header at once, as it was before. Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Introduce new helper functions which try kmalloc, and then fall back to vmalloc if necessary, and use them for allocating and deallocating s_flex_groups. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Pavel Shilovsky 提交于
Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 David Brown 提交于
Migrate the driver for the v7-based MSM chips into drivers/gpio. The driver is unchanged, only moved. Change-Id: I810db5b50b71cdca4e869aa0d0310f7f48781a55 Signed-off-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
由 David Brown 提交于
Migrate the driver for the v6-based MSM chips into drivers/gpio. The driver is unchanged, only moved. Change-Id: I03ba597b95b4d62b42da112a8efac88d67aa40f9 Signed-off-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
由 David Brown 提交于
No need to have a separate header file containing only register definitions that are used by a single driver. Fold these into the gpio driver. Signed-off-by: NDavid Brown <davidb@codeaurora.org>
-
由 David Brown 提交于
The gpiomux.h header contains some SOC ifdefs. However, the API that is actually used by the GPIO driver only uses two functions that are general. Move these general definitions into a public header file. Change-Id: Ia5df8af87dba268225598d56908e523bcfc24ef6 Signed-off-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
由 David Brown 提交于
Select the GPIO register configuration at runtime rather than through idefs. Change-Id: I02ea0a3d61bc81669f32097c32420f0688552231 Signed-off-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
由 David Brown 提交于
Put an SOC prefix on each GPIO register definition, eliminating the need to have SOC ifdefs around the definitions. Change-Id: I5a01fd328a89ce1be610847934d6e118f5465e42 Signed-off-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
由 David Brown 提交于
The two GPIO controllers are always mapped to the same virtual address across all MSM devices. Instead of selecting this at compile time, determine the physical address at runtime, eliminating yet something else preventing multiple MSM targets from being compiled into the same kernel. Change-Id: I1672219d978ab6243526adeda6badf49472baa27 Signed-off-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-