Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2

  The majority of these are USB gadget fixes, but they are all small.
  Other than that, some USB host controller fixes, and USB serial driver
  fixes for problems reported with them.

  Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems
  to be almost impossible to get right for all of the different
  platforms these days."

* tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
  USB: cxacru: potential underflow in cxacru_cm_get_array()
  USB: ftdi_sio: Add support for Newport CONEX motor drivers
  USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
  usb: ohci: fix goto wrong tag in err case
  usb: isp1760-if: fix memleak when platform_get_resource fail
  usb: ehci-s5p: fix memleak when fallback to pdata
  USB: serial: clean up chars_in_buffer
  USB: ti_usb_3410_5052: fix chars_in_buffer overhead
  USB: io_ti: fix chars_in_buffer overhead
  USB: ftdi_sio: fix chars_in_buffer overhead
  USB: ftdi_sio: clean up get_modem_status
  USB: serial: add generic wait_until_sent implementation
  USB: serial: add wait_until_sent operation
  USB: set device dma_mask without reference to global data
  USB: Blacklisted Cinterion's PLxx WWAN Interface
  usb: option: Add Telewell TW-LTE 4G
  USB: EHCI: remove bogus #error
  USB: reset resume quirk needed by a hub
  USB: usb-stor: realtek_cr: Fix compile error
  usb, chipidea: fix link error when USB_EHCI_HCD is a module
  ...

Pull kvm bugfixes from Gleb Natapov.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock()
  KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a user visible API.
  KVM: take over co-maintainership from Marcelo, fix MAINTAINERS entry

Fix build error io vmw_vmci.ko when CONFIG_VMWARE_VMCI=m by chaning
iovec.o from lib-y to obj-y.

  ERROR: "memcpy_toiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined!
  ERROR: "memcpy_fromiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined!
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull AVR32 update from Hans-Christian Egtvedt:
 "wow, it has gone 10 releases since my last request :("

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: fix building warnings caused by redefinitions of HZ
  avr32: fix relocation check for signed 18-bit offset
  avr32: move NODES_SHIFT into Kconfig and delete numnodes.h

Pull MIPS update from Ralf Baechle:
 - Fix a build error if <linux/printk.h> is included without
   <linux/linkage.h> having been included before.
 - Cleanup and fix the damage done by the generic idle loop patch.
 - A kprobes fix that brings the MIPS code in line with what other
   architectures are for quite a while already.
 - Wire up the native getdents64(2) syscall for 64 bit - for some reason
   it was only for the compat ABIs.  This has been reported to cause an
   application issue.  This turned out bigger than I meant but the wait
   instruction support code was driving me nuts.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: N64: Wire getdents64(2)
  kprobes/mips: Fix to check double free of insn slot
  MIPS: Idle: Break r4k_wait into two functions and fix it.
  MIPS: Idle: Do address fiddlery in helper functions.
  MIPS: Idle: Consolidate all declarations in <asm/idle.h>.
  MIPS: Idle: Don't call local_irq_disable() in cpu_wait() implementations.
  MIPS: Idle: Re-enable irqs at the end of r3081, au1k and loongson2 cpu_wait.
  MIPS: Idle: Make call of function pointer readable.
  MIPS: Idle: Consistently reformat inline assembler.
  MIPS: Idle: cleaup SMTC idle hook as per Linux coding style.
  MIPS: Consolidate idle loop / WAIT instruction support in a single file.
  MIPS: clock.h: Remove declaration of cpu_wait.
  Add include dependencies to <linux/printk.h>.
  MIPS: Rewrite pfn_valid to work in modules, too.

As suggested by David Howells <dhowells@redhat.com>, use
asm-generic/param.h and uapi/asm-generic/param.h for AVR32.

It also fixes building warnings caused by redefinitions of HZ:
In file included from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4,
                 from include/linux/timex.h:63,
                 from include/linux/jiffies.h:8,
                 from include/linux/ktime.h:25,
                 from include/linux/timer.h:5,
                 from include/linux/workqueue.h:8,
                 from include/linux/srcu.h:34,
                 from include/linux/notifier.h:15,
                 from include/linux/memory_hotplug.h:6,
                 from include/linux/mmzone.h:777,
                 from include/linux/gfp.h:4,
                 from arch/avr32/mm/init.c:10:
/ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:6:1: warning: "HZ" redefined
In file included from /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:4,
                 from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4,
                 from include/linux/timex.h:63,
                 from include/linux/jiffies.h:8,
                 from include/linux/ktime.h:25,
                 from include/linux/timer.h:5,
                 from include/linux/workqueue.h:8,
                 from include/linux/srcu.h:34,
                 from include/linux/notifier.h:15,
                 from include/linux/memory_hotplug.h:6,
                 from include/linux/mmzone.h:777,
                 from include/linux/gfp.h:4,
                 from arch/avr32/mm/init.c:10:
/ws/linux/kernel/linux.git/arch/avr32/include/uapi/asm/param.h:6:1: warning: this is the location of the previous definition
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>

virt_to_page() is typically implemented as a macro containing a cast so
that it will accept both pointers and unsigned long without causing a
warning.

But MIPS virt_to_page() uses virt_to_phys which is a function so passing
an unsigned long will cause a warning:

    CC      mm/page_alloc.o
  mm/page_alloc.c: In function ‘free_reserved_area’:
  mm/page_alloc.c:5161:3: warning: passing argument 1 of ‘virt_to_phys’ makes pointer from integer without a cast [enabled by default]
  arch/mips/include/asm/io.h:119:100: note: expected ‘const volatile void *’ but argument is of type ‘long unsigned int’

All others users of virt_to_page() in mm/ are passing a void *.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Reported-by: NEunbong Song <eunb.song@samsung.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull mfd fixes from Samuel Ortiz:
 "This is the first batch of MFD fixes for 3.10.

  It's bigger than I would like, most of it is due to the big ab/db8500
  merge that went through during the 3.10 merge window.

  So we have:

   - Some build fixes for the tps65912 and ab8500 drivers.
   - A couple of build fixes for the the si476x driver with pre 4.3 gcc
     compilers.
   - A few runtime breakage fixes (probe failures or oopses) for the
     ab8500 and db8500 drivers.
   - Some sparse or regular gcc warning fixes for the si476x, ab8500 and
     cros_ec drivers."

* tag 'mfd-fixes-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
  mfd: ab8500-sysctrl: Let sysctrl driver work without pdata
  mfd: db8500-prcmu: Update stored DSI PLL divider value
  mfd: ab8500-sysctrl: Always enable pm_power_off handler
  mfd: ab8500-core: Pass GPADC compatible string to MFD core
  mfd: db8500-prcmu: Supply the pdata_size attribute for db8500-thermal
  mfd: ab8500-core: Use the correct driver name when enabling gpio/pinctrl
  mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource
  mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning
  mfd: ab8500-sysctrl: Set sysctrl_dev during probe
  mfd: ab8500-sysctrl: Fix sparse warning
  mfd: abx500-core: Fix sparse warning
  mfd: ab8500: Debugfs code depends on gpadc
  mfd: si476x: Use get_unaligned_be16() for unaligned be16 loads
  mfd: cros_ec_spi: Use %z to format pointer differences
  mfd: si476x: Do not use binary constants
  mfd: tps65912: Select MFD_CORE

Pull virtio fixes from Rusty Russell:
 "A build fix and a uapi exposure fix.  The build fix is later than I
  liked, but my first version broke linux-next due to overzealous header
  clean."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_console: fix uapi header
  Hoist memcpy_fromiovec/memcpy_toiovec into lib/

As a relatively new ABI, N64 only had getdents syscall while other modern
architectures have getdents64.

This was noticed when Python 3.3 shifted to the latter one for aarch64.

[ralf@linux-mips.org: The history of getdents64 is a little complicated.
Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.]
added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213,
then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul
of the 64-bit syscall interface.  Now heritage free.] for 2.5.18 in 2002.]
Signed-off-by: NAron Xu <aron@debian.org>
Acked-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5285/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix to check double free of insn_slot at arch_remove_kprobe
as other arches do.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Maneesh Soni <manesoni@cisco.com>
Cc: Victor Kamensky <kamensky@cisco.com>
Cc: linux-mips@linux-mips.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: yrl.pp-manager.tt@hitachi.com
Cc: systemtap@sourceware.org
Patchwork: https://patchwork.linux-mips.org/patch/5293/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock().
  Memory slots should be acccessed from a SRCU read section.
- kvm_mips_map_page() now returns an error code to it's callers, instead of
  calling panic() if it cannot find a mapping for a particular gfn.
Signed-off-by: NSanjay Lal <sanjayl@kymasys.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Signed-off-by: NSanjay Lal <sanjayl@kymasys.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

local_irq_enable() may expand into very different code, so it rather should
stay in C.  Also this keeps the assembler code size constant which keeps
the rollback code simple.  So it's best to split r4k_wait into two parts,
one C and one assembler.

Finally add the local_irq_enable() to r4k_wait to ensure the WAIT
instruction in __r4k_wait() will work properly.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The generic idle loop has already disabled interrupts so this is redundant.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Without this, the

    WARN_ON_ONCE(irqs_disabled());

in the idle loop will be triggered.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Duplicate and has no business in this header file.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

If <linux/linkage.h> has not been included before <linux/printk.h>,
a build error like the below one will result:

  CC      arch/mips/kernel/idle.o
In file included from arch/mips/kernel/idle.c:17:0:
include/linux/printk.h:109:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:109:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:110:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:110:1: error: expected ‘,’ or ‘;’ before ‘int’
include/linux/printk.h:114:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:114:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:115:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:115:1: error: expected ‘,’ or ‘;’ before ‘int’
include/linux/printk.h:117:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:117:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:118:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:118:1: error: ‘__cold__’ attribute ignored [-Werror=attributes]
include/linux/printk.h:118:1: error: expected ‘,’ or ‘;’ before ‘asmlinkage’
include/linux/printk.h:122:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:122:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:123:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:123:1: error: ‘__cold__’ attribute ignored [-Werror=attributes]
include/linux/printk.h:123:1: error: expected ‘,’ or ‘;’ before ‘int’
In file included from include/linux/kernel.h:14:0,
                 from include/linux/sched.h:15,
                 from arch/mips/kernel/idle.c:18:
include/linux/dynamic_debug.h: In function ‘ddebug_dyndbg_module_param_cb’:
include/linux/dynamic_debug.h:124:3: error: implicit declaration of function ‘printk’ [-Werror=implicit-function-declaration]

Fixed by including <linux/linkage.h>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A check for a valid plat->sysctrl was introduced in:

2377e52f mfd: ab8500-sysctrl: Error check clean up

but the driver works just fine even without that initialization data,
and enforcing it breaks existing platforms for no reason.

This patch removes the check and let the driver go ahead with probe.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Pull LED subsystem fix from Bryan Wu.

* 'leds-fixes-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: leds-gpio: reserve gpio before using it

This reverts commit a99d76f9 (leds: leds-gpio: use gpio_request_one)
and commit 2d7c22f6 (leds: leds-gpio: set devm_gpio_request_one()
flags param correctly) which was a fix of the first one.

The conversion to devm_gpio_request in commit e3b1d44c (leds:
leds-gpio: use devm_gpio_request_one) is not reverted.

The problem is that gpio_cansleep() and gpio_get_value_cansleep()
calls can crash if the gpio is not first reserved. Incidentally this
same bug existed earlier and was fixed similarly in commit d95cbe61
(leds: Fix potential leds-gpio oops). But the OOPS is real. It happens
when GPIOs are provided by module which is not yet loaded.

So this fixes the following BUG during my ALIX boot (3.9.2-vanilla):

BUG: unable to handle kernel NULL pointer dereference at 0000004c
IP: [<c11287d6>] __gpio_cansleep+0xe/0x1a
*pde = 00000000
Oops: 0000 [#1] SMP
Modules linked in: leds_gpio(+) via_rhine mii cs5535_mfd mfd_core
geode_rng rng_core geode_aes isofs nls_utf8 nls_cp437 vfat fat
ata_generic pata_amd pata_cs5536 pata_acpi libata ehci_pci ehci_hcd
ohci_hcd usb_storage usbcore usb_common sd_mod scsi_mod squashfs loop
Pid: 881, comm: modprobe Not tainted 3.9.2 #1-Alpine
EIP: 0060:[<c11287d6>] EFLAGS: 00010282 CPU: 0
EIP is at __gpio_cansleep+0xe/0x1a
EAX: 00000000 EBX: cf364018 ECX: c132b8b9 EDX: 00000000
ESI: c13993a4 EDI: c1399370 EBP: cded9dbc ESP: cded9dbc
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: 0000004c CR3: 0f0c4000 CR4: 00000090
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process modprobe (pid: 881, ti=cded8000 task=cf094aa0 task.ti=cded8000)
Stack:
 cded9de0 d09471cb 00000000 c1399260 cf364014 00000000 c1399260 c1399254
 d0949014 cded9df4 c118cd59 c1399260 d0949014 d0949014 cded9e08 c118ba47
 c1399260 d0949014 c1399294 cded9e1c c118bb75 cded9e24 d0949014 00000000
Call Trace:
 [<d09471cb>] gpio_led_probe+0xba/0x203 [leds_gpio]
 [<c118cd59>] platform_drv_probe+0x26/0x48
 [<c118ba47>] driver_probe_device+0x75/0x15c
 [<c118bb75>] __driver_attach+0x47/0x63
 [<c118a727>] bus_for_each_dev+0x3c/0x66
 [<c118b6f9>] driver_attach+0x14/0x16
 [<c118bb2e>] ? driver_probe_device+0x15c/0x15c
 [<c118b3d5>] bus_add_driver+0xbd/0x1bc
 [<d08b4000>] ? 0xd08b3fff
 [<d08b4000>] ? 0xd08b3fff
 [<c118bffc>] driver_register+0x74/0xec
 [<d08b4000>] ? 0xd08b3fff
 [<c118c8e8>] platform_driver_register+0x38/0x3a
 [<d08b400d>] gpio_led_driver_init+0xd/0x1000 [leds_gpio]
 [<c100116c>] do_one_initcall+0x6b/0x10f
 [<d08b4000>] ? 0xd08b3fff
 [<c105e918>] load_module+0x1631/0x1907
 [<c10975d6>] ? insert_vmalloc_vmlist+0x14/0x43
 [<c1098d5b>] ? __vmalloc_node_range+0x13e/0x15f
 [<c105ec50>] sys_init_module+0x62/0x77
 [<c1257888>] syscall_call+0x7/0xb
EIP: [<c11287d6>] __gpio_cansleep+0xe/0x1a SS:ESP 0068:cded9dbc
CR2: 000000000000004c
 ---[ end trace 5308fb20d2514822 ]---
Signed-off-by: NTimo Teräs <timo.teras@iki.f>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Raphael Assenat <raph@8d.com>
Cc: Trent Piepho <tpiepho@freescale.com>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Pull i2c bugfixes from Wolfram Sang:
 "These should have been in rc2 but I missed it due to working on devm
  longer than expected.

  There is one ID addition, since we are touching the driver anyhow.
  And the feature bit documentation is one outcome of a debug session
  and will make it easier for users to work around problems.  The rest
  is typical driver bugfixes."

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: suppress lockdep warning on delete_device
  i2c: mv64xxx: work around signals causing I2C transactions to be aborted
  i2c: i801: Document feature bits in modinfo
  i2c: designware: add Intel BayTrail ACPI ID
  i2c: designware: always clear interrupts before enabling them
  i2c: designware: fix RX FIFO overrun

Pull s390 update from Martin Schwidefsky:
 "An additional sysfs attribute for channel paths and a couple of bux
  fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pgtable: fix ipte notify bit
  s390/xpram: mark xpram as non-rotational
  s390/smp: fix cpu re-scan vs. cpu state
  s390/cio: add channel ID sysfs attribute
  s390/ftrace: fix mcount adjustment
  s390: fix gmap_ipte_notifier vs. software dirty pages
  s390: disable pfmf for clear page instruction
  s390/disassembler: prevent endless loop in print_fn_code()
  s390: remove non existent reference to GENERIC_KERNEL_THREAD

Before f7b861b7 ("arm: Use generic idle loop") ARM would kill the
CPU within the rcu idle section.  Now that the rcu_idle_enter()/exit()
pair have been pushed lower down in the idle loop this is no longer true
and so using RCU_NONIDLE here is no longer necessary and also harmful
because RCU is not actually idle at this point.

Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull radeon sun/hainan support from  Dave Airlie:
 "Since I know its outside the merge window, but since this is new hw I
  thought I'd try and provoke the new hw exception, it just fills in the
  blanks in the driver for the new AMD sun and hainan chipsets."

* 'drm-radeon-sun-hainan' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: add Hainan pci ids
  drm/radeon: add golden register settings for Hainan (v2)
  drm/radeon: sun/hainan chips do not have UVD (v2)
  drm/radeon: track which asics have UVD
  drm/radeon: radeon-asic updates for Hainan
  drm/radeon: fill in ucode loading support for Hainan
  drm/radeon: don't touch DCE or VGA regs on Hainan (v3)
  drm/radeon: fill in GPU init for Hainan (v2)
  drm/radeon: add chip family for Hainan

Pull DRM fixes from Dave Airlie:
 "This is just a set of nouveau and radeon fixes, the nouveau ones fix
  some suspend/resume regressions since use of copy engines and some
  fixes for Z compression on some newer chipsets."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/dce2: use 10khz units for audio dto calculation
  drm/radeon: Fix VRAM size calculation for VRAM >= 4GB
  drm/radeon: Remove superfluous variable
  drm/nouveau: ensure channels are stopped before saving fences for suspend
  drm/nv50/fifo: prevent races between clients updating playlists
  drm/nvc0/fifo: prevent CHAN_TABLE_ERROR:CHANNEL_PENDING on fifo fini
  drm/nvc0/fifo: prevent races between clients updating playlists
  drm/nve0/fifo: prevent races between clients updating playlists
  drm/nve0/ltcg: poke the partition count into yet another register
  drm/nvc0/ltcg: fix handling of disabled partitions
  drm/nvc0/ce: disable ce1 on a number of chipsets
  drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcode
  drm/nouveau: fix build with nv50->nvc0

This is the pull request for AMD Sun/Hainan support.  I've
split it out separately from my regular fixes stream.  Hainan
is a new SI asic with no UVD or DCE hardware.  The patches are
minimally invasive; basically just pci ids and skipping UVD and
DCE init for this family.  Most of the changes to si.c are just
the golden register tables for the family.

* 'drm-fixes-3.10-sun' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: add Hainan pci ids
  drm/radeon: add golden register settings for Hainan (v2)
  drm/radeon: sun/hainan chips do not have UVD (v2)
  drm/radeon: track which asics have UVD
  drm/radeon: radeon-asic updates for Hainan
  drm/radeon: fill in ucode loading support for Hainan
  drm/radeon: don't touch DCE or VGA regs on Hainan (v3)
  drm/radeon: fill in GPU init for Hainan (v2)
  drm/radeon: add chip family for Hainan

Minor bug fixes.

* 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon/dce2: use 10khz units for audio dto calculation
  drm/radeon: Fix VRAM size calculation for VRAM >= 4GB
  drm/radeon: Remove superfluous variable

Merge tag 'stable/for-linus-3.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen fixes from Konrad Rzeszutek Wilk:
 - Regression fix in xen privcmd fixing a memory leak.
 - Add Documentation for tmem driver.
 - Simplify and remove code in the tmem driver.
 - Cleanups.

* tag 'stable/for-linus-3.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: Fixed assignment error in if statement
  xen/xenbus: Fixed over 80 character limit issue
  xen/xenbus: Fixed indentation error in switch case
  xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off.
  xen/tmem: Remove the usage of '[no|]selfballoon' and use 'tmem.selfballooning' bool instead.
  xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead.
  xen/tmem: Remove the boot options and fold them in the tmem.X parameters.
  xen/tmem: s/disable_// and change the logic.
  xen/tmem: Fix compile warning.
  xen/tmem: Split out the different module/boot options.
  xen/tmem: Move all of the boot and module parameters to the top of the file.
  xen/tmem: Cleanup. Remove the parts that say temporary.
  xen/privcmd: fix condition in privcmd_close()

Pull hwmon fixes from Guenter Roeck:

 - Error path fixes for abituguru and iio_hwmon drivers.

 - Drop erroneously created attributes from nct6775 driver.

 - Drop redundant safety on cache lifetime for tmp401 driver.

 - Add explicit maintainer for LM95234 and TMP401 drivers.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  MAINTAINERS: Add myself as maintainer for LM95234 and TMP401 drivers
  hwmon: (tmp401) Drop redundant safety on cache lifetime
  hwmon: fix error return code in abituguru_probe()
  hwmon: (iio_hwmon) Fix null pointer dereference
  hwmon: (nct6775) Do not create non-existing attributes
  hwmon: (iio_hwmon) Fix missing iio_channel_release_all call if devm_kzalloc fail

In commit 78d77df7 ("x86-64, init: Do not set NX bits on non-NX
capable hardware") we added the early_pmd_flags that gets the NX bit set
when a CPU supports NX. However, the new variable was marked __initdata,
because the main _use_ of this is in an __init routine.

However, the bit setting happens from secondary_startup_64(), which is
called not only at bootup, but on every secondary CPU start.  Including
resuming from STR and at CPU hotplug time.  So the value cannot be
__initdata.
Reported-bisected-and-tested-by: NMichal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org # v3.9
Acked-by: NPeter Anvin <hpa@linux.intel.com>
Cc: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The value of "offd" comes off the instance->rcv_buf[] and we used it as
the offset into an array.  The problem is that we check the upper bound
but not for negative values.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed assignment error in if statement in balloon.c
Signed-off-by: NLisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>