- 02 2月, 2006 1 次提交
-
-
由 Mikael Pettersson 提交于
Kernel 2.6.16-rc1 broke the ide-scsi driver: ide-scsi loads but fails to find any devices to bind to. It also triggers a message "Driver 'ide-scsi' needs updating - please use bus_type methods" from the driver core. The IDE core in 2.6.16-rc1 changed the location of an IDE driver's ->probe()/->remove()/->shutdown() methods: they are now in the ide_driver_t struct not in the gen_driver sub-struct. drivers/ide/ was updated for this change but ide-scsi.c wasn't. Hence the breakage. This patch repairs ide-scsi and also eliminates the driver core warning. Signed-off-by: NMikael Pettersson <mikpe@csd.uu.se> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 2月, 2006 39 次提交
-
-
由 Arthur Othieno 提交于
Richard Knutsson <ricknu-0@student.ltu.se> did the original pci_module_init() cleanups: http://marc.theaimsgroup.com/?l=linux-kernel&m=113330872125068&w=2 http://marc.theaimsgroup.com/?l=linux-kernel&m=113330888507321&w=2 Greg, on it's way upstream, pci_module_init() return sneaked back in for cyblafb? http://marc.theaimsgroup.com/?l=linux-pci&m=113652969209562&w=2 http://marc.theaimsgroup.com/?l=linux-pci&m=113683930220421&w=2 Remove for good. Signed-off-by: NArthur Othieno <apgo@patchbomb.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Error checking is scattered through various layers of the dlpar code, leading to a somewhat opaque code structure. This patch consolidates error checking in one routine, simplifying the code a tad. There's also some whitespace cleanup here too. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Minor cleanup. Move structure initializer to bottom of file, this allows elimination of eyeball-strain-inducing forward declarations. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Minor cleanup. Add the prefix rpaphp_* to several generic-sounding routines. Remove rpaphp_remove_slot(), which is a one-liner. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Remove general baroqueness. The function rpaphp_enable_pci_slot() has a fairly simple logic structure, once all of the debug printk's are removed. Its called from only one place, and that place also has a very simple structure once he printk's are removed. Merge the two together. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Remove general baroqueness. The function rpaphp_unconfig_pci_adapter() is really just three lines of code, once all the dbg printks are removed. And its called in only one place. So replace the call by the thre lines. Also, provide proper semaphore locking in the affected function disable_slot() Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
The function rpaphp_eeh_remove_bus_device() is a dupe of eeh_remove_bus_device(). Remove it. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Remove general baroqueness. The function rpaphp_config_pci_adapter() is really just one line of code, once all the dbg printks are removed. And its called in only one place. So replace the call by the one line. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
The function rpaphp_fixup_new_pci_devices() has been migrated to pcibios_fixup_new_pci_devices() in arch/powerpc/platforms/pseries/pci_dlpar.c This patch removes the old version. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
The function rpaphp_find_pci_bus() has been migrated to pcibios_find_pci_bus() in arch/powerpc/platforms/pseries/pci_dlpar.c This patch removes the old version. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Keck, David 提交于
This patch fixes the AMD POGO errata on the hotplug controller where the platform will lock up or reboot if PERR/SERR generation is enabled and a slot is sent an enable command. This fix disables PERR/SERR generation before a slot is sent the enable command by first saving related registers, turning off SERR/PERR generation, enabling the slot, then restoring the registers. Signed-off-by: NDavid Keck <david.keck@amd.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas 提交于
Removing and then adding a PCI slot to a running partition results in a kernel panic. The current code attempts to add iospace for an entire root bus, which is inappropriate, and silently fails. When a pci device tries to use the iospace, a page fault is taken, as the iospace had not been mapped, and of course the page fault cannot be resolved. This only occurs for PCI adapters using pio, which may be why it hadn't been seen earlier (this seems to have been broken for a while). This patch has survived testing of dozens of slot add and removes. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas 提交于
The RPAPHP hoplug driver will not build as a module, because it calls on pci_claim_resource(), which is not exported. This exports the symbol. Problem reported by Olaf Hering <olh@suse.de> A grep indicates that building drivers/parisc/lba_pci.c would have trouble building as a module for the same reason. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pavel Machek 提交于
Remove reference to pcihpfs that no longer exists. Signed-off-by: NPavel Machek <pavel@suse.cz>
-
由 Pavel Machek 提交于
Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Grant Grundler 提交于
I missed this usage in drivers/pci/msi.h: #ifdef CONFIG_SMP #define set_msi_irq_affinity set_msi_affinity #else #define set_msi_irq_affinity NULL #endif set_msi_affinity() is declared and exclusively used in msi.c. Here's a better way so (hopefully) history doesn't repeat itself. Signed-off-by: NGrant Grundler <iod00d@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch #if 0's the unused global function pci_find_ext_capability(). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This makes sure that the correct length is reported when freeing a dma-coherent buffer; some platforms complain if that's wrong. It also makes two parameters readonly in sysfs, as they're not safe to change while tests are running. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
drivers/usb/input/yealink.c: In function `usb_probe': drivers/usb/input/yealink.c:910: warning: int format, different type arg (arg 4) Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
We cast an int to a void * which not unreasonably makes gcc suspicious. We don't actually care what type "type" is so use unsigned long so it matches pointer length on all platforms. Signed-off-by: NAlan Cox <alan@redhat.com> Acked-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alexey Dobriyan 提交于
drivers/usb/core/message.c:395: error: invalid use of undefined type `struct scatterlist' Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sergei Shtylylov 提交于
au_readl() does needed byteswapping, etc. Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Acked-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Olaf Hering 提交于
The warn() macro in include/linux/usb.h adds a newline. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
- the decomp module is not intended for inclusion into the kernel - people using the decomp module from upstream will usually simply use the complete upstream 2.xx driver Therefore, there seems to be no good reason spending some bytes of kernel memory for hooks for this module. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMark McClelland <mark@ovcam.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
- the w9968cf-vpp module is not intended for inclusion into the kernel - the upstream w9968cf package shipping the w9968cf-vpp module suggests to simply replace the w9968cf module shipped with the kernel Therefore, there seems to be no good reason spending some bytes of kernel memory for hooks for the w9968cf-vpp module. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Randy Dunlap 提交于
Fix sparse warning: drivers/usb/host/ehci-hcd.c:719:35: warning: incorrect type in argument 3 (different base types) drivers/usb/host/ehci-hcd.c:719:35: expected unsigned int [unsigned] mem_flags drivers/usb/host/ehci-hcd.c:719:35: got restricted unsigned int [usertype] mem_flags Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
this patch removes compatibility with 2.4 kernel, which makes the code much easier to read. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as622) makes gadgetfs set the "zero" flag for control-IN responses, when the length of the response is shorter than the length of the request. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Olav Kongas 提交于
Replace mdelay() by msleep() in bus_suspend(); the rest of the system will gain 7ms. The related code is reorganized to minimize the number of locking/unlocking calls. The last hunk of the patch is the formatting change by Lindent. Signed-off-by: NOlav Kongas <ok@artecdesign.ee> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
For some reason alpha doesn't include <linux/dma-mapping.h> where other architectures do; this makes net2280 include it explicitly. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
As there is no more usb devfs support, these bits would just confuse people. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
Some USB devices don't enumerate well with FSBR turned on. This patch keeps devices on the low-speed part of the schedule (which doesn't use FSBR) until they have been fully configured. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Clemens Ladisch 提交于
This patch adds a reinitializion for the uf variable that got modified by the preceding start-split bandwidth check. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Vojtech Pavlik 提交于
My earlier experiment (adding a clear-halt for the interrupt-in endpoint) failed. It turns out that it does cause problems for other devices. And it wasn't needed anyway; a simple blacklist entry was enough to get my HP keyboard working. This patch (as643) removes the clear-halt call and adds the blacklist entry. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
Add device support for a couple more Auerswald TK-devices. Via Thomas Jackle <dj-tj@gmx.de>, typed in from http://bugzilla.kernel.org/show_bug.cgi?id=5908. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 matthieu castet 提交于
this patch correct a possible bug with cmv_name being static. If there is 2 modems and the driver is scheduled when filling cmv_name this could result with garbage in cmv_name. We allocate cmv_name on the stack but with a small size in order to avoid that. Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 matthieu castet 提交于
this patch is purely cosmetic. There is : - indentation cleaning - unneeded cast removing - comments cleaning Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 matthieu castet 提交于
This patch adds the support for isochronous pipe. A new module parameter is added to select iso mode. It is set to iso by default because bulk mode doesn't work well at high speed rate (>3 Mbps for upload). We use UDSL_IGNORE_EILSEQ flags because ADI firmware doesn't reply to ISO IN when it has nothing to send [1]. [1] from cypress datasheet : The ISOSEND0 Bit (bit 7 in the USBPAIR Register) is used when the EZ-USB FX chip receives an isochronous IN token while the IN FIFO is empty. If ISOSEND0=0 (the default value), the USB core does not respond to the IN token. If ISOSEND0=1, the USB core sends a zero-length data packet in response to the IN token. The action to take depends on the overall system design. The ISOSEND0 Bit applies to all of the isochronous IN endpoints, IN-8 through IN-15. Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-