- 11 6月, 2008 1 次提交
-
-
由 Giuseppe Coviello 提交于
The Sam440ep is an high customizable general purpose mini-itx board, based on the AMCC 440EP and with a LatticeXP FPGA onboard. It's poduced by ACube Systems Srl (Bassano del Grappa, Italy), http://www.acube-systems.biz. Signed-off-by: NGiuseppe Coviello <gicoviello@gmail.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 03 4月, 2008 1 次提交
-
-
由 Stefan Roese 提交于
This patch creates a common system reset routine for all 40x and 44x systems. Previously only a 44x routine existed. But since this system reset via the debug control register is common for 40x and 44x let's share this code for all those platforms in ppc4xx_soc.c. This patch also enables CONFIG_4xx_SOC for all 40x and 44x platforms. Tested on Kilauea (405EX) and Canyonlands (440EX). Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 26 3月, 2008 3 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the 256k L2 cache found on some IBM/AMCC 4xx PPC's. It introduces a common 4xx SoC file (sysdev/ppc4xx_soc.c) which currently "only" adds the L2 cache init code. Other common 4xx stuff can be added later here. The L2 cache handling code is a copy of Eugene's code in arch/ppc with small modifications. Tested on AMCC Taishan 440GX. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
The AMCC 440EP Yosemite board is very similar to the original AMCC Bamboo board. This adds a YOSEMITE option to Kconfig, and reuses the existing bamboo board support in the kernel. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Stefan Roese 提交于
Canyonlands is the AMCC 460EX eval board, featuring nearly all of the 460EX interfaces: - 1 * PCI (max 66MHz), 2 * PCIe (one 4-lane, one 1-lane) - 2 * GBit Ethernet with TCP/IP acceleration - USB 2.0 Host/Device OTG and Host interface - SATA port Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 16 2月, 2008 1 次提交
-
-
由 Josh Boyer 提交于
Clean up some whitespace issues in the 44x Kconfig file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 25 1月, 2008 2 次提交
-
-
由 Sean MacLennan 提交于
Add the base platform support for the PIKA Warp boards. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 David Gibson 提交于
This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 24 12月, 2007 7 次提交
-
-
由 Josh Boyer 提交于
Enable PCI support for these eval boards among other things. Also selects PCI for Rainier in the Kconfig file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
PowerPC 440GRx Rainier board support. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Benjamin Herrenschmidt 提交于
This adds base support for the Katmai board, including PCI-X and PCI-Express (but no RTC, nvram, etc... yet). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Benjamin Herrenschmidt 提交于
This adds the device-tree bits & call to ppc4xx_pci_find_bridges() to make PCI work on the Bamboo board Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Hugh Blemings 提交于
This patch adds base support for the AMCC Taishan 440GX evaluation board. Signed-off-by: NHugh Blemings <hugh@blemings.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Benjamin Herrenschmidt 提交于
This wires up the 4xx PCI support & device tree bits for 440GP based Ebony platform. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Benjamin Herrenschmidt 提交于
This adds a cputable function pointer for the CPU-side machine check handling. The semantic is still the same as the old one, the one in ppc_md. overrides the one in cputable, though ultimately we'll want to change that so the CPU gets first. This removes CONFIG_440A which was a problem for multiplatform kernels and instead fixes up the IVOR at runtime from a setup_cpu function. The "A" version of the machine check also tweaks the regs->trap value to differenciate the 2 versions at the C level. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 20 10月, 2007 3 次提交
-
-
由 Josh Boyer 提交于
Fix some device tree omissions that prevented the new EMAC driver from setting up ethernet on the Bamboo board correctly and update the Bamboo defconfig. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
This patch enables NEW EMAC support for PowerPC 440EPx Sequoia board. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
This adds RGMII support to Sequoia DTS and sets correct phy-mode for EMACs. According to Sequoia datasheet, both ethernet ports are connected to RGMII interface, while ZMII is used only for MDIO. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 11 10月, 2007 1 次提交
-
-
由 David Gibson 提交于
Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 07 9月, 2007 1 次提交
-
-
由 Valentine Barshak 提交于
AMCC PPC440EPx Sequoia board support. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 20 8月, 2007 1 次提交
-
-
由 Josh Boyer 提交于
Add support for the AMCC Bamboo board Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 17 5月, 2007 1 次提交
-
-
由 Tony Breeds 提交于
An allmodconfig on the current powerpc tree yields: arch/powerpc/platforms/44x/Kconfig:41:warning: 'select' used by config symbol '440GP' refers to undefined symbol 'IBM_NEW_EMAC_ZMII' Hide the select until the driver exists. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 5月, 2007 1 次提交
-
-
由 David Gibson 提交于
This adds platform support code for the Ebony (440GP) evaluation board. This includes both code in arch/powerpc/platforms/44x for board initialization, and zImage wrapper code to correctly tweak the flattened device tree based on information from the firmware. The zImage supports both IBM OpenBIOS (aka "treeboot") and old versions of uboot which don't support a flattened device tree. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-