Add an option to only transfer half the data for every n-th command.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>

Taken almost entirely from Nicholas Bellinger's scsi-mq conversion.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>

In case of error, the bnx2fc_allocate_hash_table() didn't free
all the memory it allocated.
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Acked-by: NEddie Wai <eddie.wai@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If bnx2fc_allocate_hash_table() for some reasons fails, it is possible that the
hash_tbl_segments or the hash_tbl_pbl pointers are NULL.
In this case bnx2fc_free_hash_table() will panic the system.

this patch also fixes a memory leak, the hash_tbl_segments pointer was never
freed.
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Acked-by: NEddie Wai <eddie.wai@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

hash_table_size is not used by the bnx2fc_free_hash_table() function.
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Acked-by: NEddie Wai <eddie.wai@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

And while we're at it fix a magic number
Signed-off-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Checking for a NULL return from a kzalloc call in hpsa_get_pdisk_of_ioaccel2.
Signed-off-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Checking return value for the memory allocattion and freeing it
while exiting the function
Signed-off-by: NViswas G <Viswas.G@pmcs.com>
Signed-off-by: NSuresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Acked-by: NJack Wang <xjtuwjp@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Access to tgt->req_vq is strictly serialized by spin_lock
of tgt->tgt_lock, so the ACCESS_ONCE() isn't necessary.

smp_read_barrier_depends() in virtscsi_req_done was introduced
to order reading req_vq and decreasing tgt->reqs, but it isn't
needed now because req_vq is read from
scsi->req_vqs[vq->index - VIRTIO_SCSI_VQ_BASE] instead of
tgt->req_vq, so remove the unnecessary barrier.

Also remove related comment about the barrier.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add a memory barrier to ensure the valid bit is read before
any of the cqe payload is read. This fixes an issue seen
on Power where the cqe payload was getting loaded before
the valid bit. When this occurred, we saw an iotag out of
range error when a command completed, but since the iotag
looked invalid the command didn't get completed to scsi core.
Later we hit the command timeout, attempted to abort the command,
then waited for the aborted command to get returned. Since the
adapter already returned the command, we timeout waiting,
and end up escalating EEH all the way to host reset. This
patch fixes this issue.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>

 ---

 lpfc_sli.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Acked-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

[Resend of earlier patch - added equivalent changes to sun3 NCR5380 code]

The abort/reset lowlevel return codes had changed with the new
error SCSI handling - update Atari and Sun3 NCR5380 drivers to reflect this.

Change reset handling for Atari to clear queues only, do not attempt
to call done() on each command aborted by the reset. The EH code
should do that for us. Queues _must_ be cleared, otherwise
atari_scsi_bus_reset will not release the ST-DMA lock, deadlocking
further error recovery.

Update the Sun3 NCR5380 driver as well - the Sun3 driver was
derived from the Atari one. Kudos to Finn Thain for the Sun3 part
and cleaning up the header files. After the header cleanup, the
initio.h include (!) can be dropped from sun3_scsi.h now.
Signed-off-by: NMichael Schmitz <schmitz@debian.org>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Acked-by: NSam Creasey <sammy@sammy.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: James E.J. Bottomley <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The format strings for various printk()s make use of a temporary
variable that is declared 'static'. This is probably not intended,
so fix those.

Found in the PaX patch, written by the PaX Team.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Acked-by: NHannes Reinecke <hare@suse.de>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Minor fix for a message in the driver so that it matches the function name.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NBradley Grove <bgrove@attotech.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

bfa_fcb_pbc_vport_create() is called only from bfa_fcs_pbc_vport_init(),
that is called only from bfad_drv_start() with bfad_lock spinlock held.
So the patch replaces GFP_KERNEL with GFP_ATOMIC to avoid
sleeping in atomic spinlock context.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: NAnil Gurumurthy <anil.gurumurthy@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix following smatch warning:-
 drivers/scsi/qla4xxx/ql4_os.c:1752 qla4xxx_get_ep_param() warn: variable dereferenced before check 'qla_ep' (see line 1745)
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Issue:
modprobe qla4xxx is killed by systemd due to timeout.

Solution:
The exporting of sysfs DDBs from qla4xxx_probe_adapter added delay of
approximately 15s due to which system-udevd killed the modprobe of the
driver. Added fix to export the sysfs DDBs from the DPC handler.
Signed-off-by: NNilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NTej Parkash <tej.parkash@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Use correct goto statement to free dma memory in case of
failure in function qla4_84xx_config_acb()
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Issue:
System crash while target discovery for ISP40XX

Root cause:
Function qla4xxx_init_rings() is not called for ISP40XX

Fix:
Call function qla4xxx_init_rings() for ISP40XX from
qla4xxx_start_firmware().
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Check for correct return status in function -
qla4_8xxx_minidump_pex_dma_read
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NTej Parkash <tej.parkash@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Updated driver with new opcode (RDDFE, RDMDIO and POLLWR) which are
added with latest firmware minidump template
Signed-off-by: NTej Parkash <tej.parkash@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NTej Parkash <tej.parkash@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NTej Parkash <tej.parkash@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Problem:
iSCSI stop_firmware mailbox command is not completing outstanding IO.

Solution:
Do not wait for IO completion after issuing stop_firmware mailbox
command
Signed-off-by: NTej Parkash <tej.parkash@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Update the MAINTAINERS file to indicate the current maintainers
for the IBM Power 842 Compression driver, IBM Power Virtual SCSI
driver and the IBM Power Virtual FC Driver.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Acked-by: NRobert Jennings <rob@pochix.net>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Commit 659743b0 "[SCSI] libiscsi: Reduce locking contention in fast path" introduced a
new smatch warning on libiscsi.c "iscsi_xmit_task() warn: inconsistent returns
bottom_half:: locked (1410 [(-61)]) unlocked (1425 [0], 1425 [s32min-(-1),1-s32max])",
which we can eliminate by using non bh locking on the nested spin_lock call.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic
driver to trace the control path frames like discovery, FLOGI request/reply,
PLOGI request/reply, link event etc.  It will be one trace file for all fnics.
It will help us to debug and resolve the discovery and initialization related
issues in more convenient way. This trace information includes time stamp,
Host Number, Frame type, Frame Length and Frame. By default,64 pages are
allocated but we can change the number of allocated pages by module parameter
fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are
depends on allocated number of pages. We can turn on or off the fnic control
path trace functionality by module paramter fc_trace_enable and/or reset the
trace contain by module paramter fc_trace_clear.
Signed-off-by: NHiral Shah <hishah@cisco.com>
Signed-off-by: NSesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In fnic abort handler, abort queuing can be failed when hardware queue is full.
The command state is left as abort queued. The command with abort queued state
will never be queued next time for abort or termiantion.
Fix restores the command state in above case.
Signed-off-by: NHiral Shah <hishah@cisco.com>
Signed-off-by: NSesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: NNarsimhulu Musini <nmusini@cisco.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This patch contains following three minor fixes.

1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not
   expected, setting the internal fip state to Non FIP mode explicitly, avoids
   sending FIP frame.

2) When target goes offline, all outstanding IOs belong to the target will be
   terminated by driver, If the termination count is high, then it influences
   firmware responsiveness. To improve the responsiveness, default IO throttle
   count is reduced to 256.

3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF)
   is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to
   receiving flogi reject from switch. As CVL clears all FCFs.
Signed-off-by: NHiral Shah <hishah@cisco.com>
Signed-off-by: NSesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: NNarsimhulu Musini <nmusini@cisco.com>
Signed-off-by: NAnantha Tungarakodi <atungara@cisco.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This can block progress of the SCSI error handler thread and cause long I/O
outages.  Instead just fail immediately if another reset is going on or we are
accessing flash memory.
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>