Skip to content

K
Kernel

openeuler / Kernel
12 个月 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 17 4月, 2008 1 次提交
  3. 12 4月, 2008 1 次提交
  5. 05 4月, 2008 1 次提交
    • P
      cgroups: add cgroup support for enabling controllers at boot time · 8bab8dde
      由 Paul Menage 提交于 
      The effects of cgroup_disable=foo are:

- foo isn't auto-mounted if you mount all cgroups in a single hierarchy
- foo isn't visible as an individually mountable subsystem

As a result there will only ever be one call to foo->create(), at init time;
all processes will stay in this group, and the group will never be mounted on
a visible hierarchy.  Any additional effects (e.g.  not allocating metadata)
are up to the foo subsystem.

This doesn't handle early_init subsystems (their "disabled" bit isn't set be,
but it could easily be extended to do so if any of the early_init systems
wanted it - I think it would just involve some nastier parameter processing
since it would occur before the command-line argument parser had been run.

Hugh said:

  Ballpark figures, I'm trying to get this question out rather than
  processing the exact numbers: CONFIG_CGROUP_MEM_RES_CTLR adds 15% overhead
  to the affected paths, booting with cgroup_disable=memory cuts that back to
  1% overhead (due to slightly bigger struct page).

  I'm no expert on distros, they may have no interest whatever in
  CONFIG_CGROUP_MEM_RES_CTLR=y; and the rest of us can easily build with or
  without it, or apply the cgroup_disable=memory patches.

Unix bench's execl test result on x86_64 was

== just after boot without mounting any cgroup fs.==
mem_cgorup=off : Execl Throughput       43.0     3150.1      732.6
mem_cgroup=on  : Execl Throughput       43.0     2932.6      682.0
==

[lizf@cn.fujitsu.com: fix boot option parsing]
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8bab8dde
  7. 02 4月, 2008 1 次提交
    • R
      ACPI PM: Restore the 2.6.24 suspend ordering · 7731ce63
      由 Rafael J. Wysocki 提交于 
      Some time ago it turned out that our suspend code ordering broke some
NVidia-based systems that hung if _PTS was executed with one of the PCI
devices, specifically a USB controller, in a low power state.

Then, it was noticed that the suspend code ordering was not compliant
with ACPI 1.0, although it was compliant with ACPI 2.0 (and later), and
it was argued that the code had to be changed for that reason (ref.
http://bugzilla.kernel.org/show_bug.cgi?id=9528).

So we did, but evidently we did wrong, because it's now turning out that
some systems have been broken by this change. Refs:
	http://bugzilla.kernel.org/show_bug.cgi?id=10340
	https://bugzilla.novell.com/show_bug.cgi?id=374217#c16

[ I said at that time that something like this might happend, but the
  majority of people involved thought that it was improbable due to the
  necessity to preserve the compliance of hardware with ACPI 1.0. ]

This actually is a quite serious regression from 2.6.24.

Moreover, the ACPI 1.0 ordering of suspend code introduced another issue
that I have only noticed recently.  Namely, if the suspend of one of
devices fails, the already suspended devices will be resumed without
executing _WAK before, which leads to problems on some systems (for
example, in such situations thermal management is broken on my HP
nx6325).  Consequently, it also breaks suspend debugging on the affected
systems.

Note also, that the requirement to execute _PTS before suspending
devices does not really make sense, because the device in question may
be put into a low power state at run time for a reason unrelated to a
system-wide suspend.

For the reasons outlined above, the change of the suspend ordering
should be reverted, which is done by the patch below.

[ Felix Möller: "I am the reporter from the original Novell Bug:

	https://bugzilla.novell.com/show_bug.cgi?id=374217

  I just tried current git head (two hours ago) with the patch (the one
  from the beginning of this thread) from Rafael and without it.  With
  the patch my MacBook does suspend without it does not." ]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NFelix Möller <felix@derklecks.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7731ce63
  9. 25 3月, 2008 1 次提交
  11. 16 3月, 2008 1 次提交
    • L
      ACPI: Remove ACPI_CUSTOM_DSDT_INITRD option · 9a9e0d68
      由 Linus Torvalds 提交于 
      This essentially reverts commit 71fc47a9
("ACPI: basic initramfs DSDT override support"), because the code simply
isn't ready.

It did ugly things to the init sequence to populate the rootfs image
early, but that just ended up showing other problems with the whole
approach.  The fact is, the VFS layer simply isn't initialized this
early, and the relevant ACPI code should either run much later, or this
shouldn't be done at all.

For 2.6.25, we'll just pick the latter option.  We can revisit this
concept later if necessary.

Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Markus Gaugusch <dsdt@gaugusch.at>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9a9e0d68
  13. 14 3月, 2008 1 次提交
  15. 13 3月, 2008 1 次提交
  17. 08 3月, 2008 1 次提交
  19. 21 2月, 2008 1 次提交
    • T
      libata: implement libata.force module parameter · 33267325
      由 Tejun Heo 提交于 
      This patch implements libata.force module parameter which can
selectively override ATA port, link and device configurations
including cable type, SATA PHY SPD limit, transfer mode and NCQ.

For example, you can say "use 1.5Gbps for all fan-out ports attached
to the second port but allow 3.0Gbps for the PMP device itself, oh,
the device attached to the third fan-out port chokes on NCQ and
shouldn't go over UDMA4" by the following.

 libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      33267325
  21. 19 2月, 2008 1 次提交
  23. 09 2月, 2008 1 次提交
  25. 07 2月, 2008 2 次提交
  27. 06 2月, 2008 1 次提交
  29. 03 2月, 2008 3 次提交
  31. 02 2月, 2008 1 次提交
  33. 30 1月, 2008 11 次提交
    • W
      x86: GEODE add the "mfgptfix" boot time option to fix MFGPT timers · e6c4dc6c
      由 Willy Tarreau 提交于 
      The new "mfgptfix" boot command line option may be usd to fix MFGPT
timers on AMD Geode platforms when the BIOS has incorrectly applied
a workaround. TinyBIOS version 0.98 is known to be affected, 0.99
fixes the problem by letting the user disable the workaround.
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      e6c4dc6c
    • Y
      x86_32: trim memory by updating e820 · 093af8d7
      由 Yinghai Lu 提交于 
      when MTRRs are not covering the whole e820 table, we need to trim the
RAM and need to update e820.

reuse some code on 64-bit as well.

here need to add early_get_cap and use it in early_cpu_detect, and move
mtrr_bp_init early.

The code successfully trimmed the memory map on Justin's system:

from:

 [    0.000000]  BIOS-e820: 0000000100000000 - 000000022c000000 (usable)

to:

 [    0.000000]   modified: 0000000100000000 - 0000000228000000 (usable)
 [    0.000000]   modified: 0000000228000000 - 000000022c000000 (reserved)

According to Justin it makes quite a difference:

|  When I boot the box without any trimming it acts like a 286 or 386,
|  takes about 10 minutes to boot (using raptor disks).
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Tested-by: NJustin Piszcz <jpiszcz@lucidpixels.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      093af8d7
    • A
      x86: add generic clearcpuid=... option · ac72e788
      由 Andi Kleen 提交于 
      Add a generic option to clear any cpuid bit. I added it because it was
very easy to add with the new generic cpuid disable bitmap and perhaps
it will be useful in the future.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      ac72e788
    • A
      x86: add noclflush option · 191679fd
      由 Andi Kleen 提交于 
      To disable CLFLUSH usage, especially in change_page_attr().
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      191679fd
    • J
      x86, 32-bit: trim memory not covered by wb mtrrs · 99fc8d42
      由 Jesse Barnes 提交于 
      On some machines, buggy BIOSes don't properly setup WB MTRRs to cover all
available RAM, meaning the last few megs (or even gigs) of memory will be
marked uncached.  Since Linux tends to allocate from high memory addresses
first, this causes the machine to be unusably slow as soon as the kernel
starts really using memory (i.e.  right around init time).

This patch works around the problem by scanning the MTRRs at boot and
figuring out whether the current end_pfn value (setup by early e820 code)
goes beyond the highest WB MTRR range, and if so, trimming it to match.  A
fairly obnoxious KERN_WARNING is printed too, letting the user know that
not all of their memory is available due to a likely BIOS bug.

Something similar could be done on i386 if needed, but the boot ordering
would be slightly different, since the MTRR code on i386 depends on the
boot_cpu_data structure being setup.

This patch fixes a bug in the last patch that caused the code to run on
non-Intel machines (AMD machines apparently don't need it and it's untested
on other non-Intel machines, so best keep it off).

Further enhancements and fixes from:

  Yinghai Lu <Yinghai.Lu@Sun.COM>
  Andi Kleen <ak@suse.de>
Signed-off-by: NJesse Barnes <jesse.barnes@intel.com>
Tested-by: NJustin Piszcz <jpiszcz@lucidpixels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      99fc8d42
    • Y
      x86: disable the GART early, 64-bit · aaf23042
      由 Yinghai Lu 提交于 
      For K8 system: 4G RAM with memory hole remapping enabled, or more than
4G RAM installed.

when try to use kexec second kernel, and the first doesn't include
gart_shutdown. the second kernel could have different aper position than
the first kernel. and second kernel could use that hole as RAM that is
still used by GART set by the first kernel. esp. when try to kexec
2.6.24 with sparse mem enable from previous kernel (from RHEL 5 or SLES
10). the new kernel will use aper by GART (set by first kernel) for
vmemmap. and after new kernel setting one new GART. the position will be
real RAM. the _mapcount set is lost.

Bad page state in process 'swapper'
page:ffffe2000e600020 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Pid: 0, comm: swapper Not tainted 2.6.24-rc7-smp-gcdf71a10-dirty #13

Call Trace:
 [<ffffffff8026401f>] bad_page+0x63/0x8d
 [<ffffffff80264169>] __free_pages_ok+0x7c/0x2a5
 [<ffffffff80ba75d1>] free_all_bootmem_core+0xd0/0x198
 [<ffffffff80ba3a42>] numa_free_all_bootmem+0x3b/0x76
 [<ffffffff80ba3461>] mem_init+0x3b/0x152
 [<ffffffff80b959d3>] start_kernel+0x236/0x2c2
 [<ffffffff80b9511a>] _sinittext+0x11a/0x121

and
 [ffffe2000e600000-ffffe2000e7fffff] PMD ->ffff81001c200000 on node 0
phys addr is : 0x1c200000

RHEL 5.1 kernel -53 said:
PCI-DMA: aperture base @ 1c000000 size 65536 KB

new kernel said:
Mapping aperture over 65536 KB of RAM @ 3c000000

So could try to disable that GART if possible.

According to Ingo

> hm, i'm wondering, instead of modifying the GART, why dont we simply
> _detect_ whatever GART settings we have inherited, and propagate that
> into our e820 maps? I.e. if there's inconsistency, then punch that out
> from the memory maps and just dont use that memory.
>
> that way it would not matter whether the GART settings came from a [old
> or crashing] Linux kernel that has not called gart_iommu_shutdown(), or
> whether it's a BIOS that has set up an aperture hole inconsistent with
> the memory map it passed. (or the memory map we _think_ i tried to pass
> us)
>
> it would also be more robust to only read and do a memory map quirk
> based on that, than actively trying to change the GART so early in the
> bootup. Later on we have to re-enable the GART _anyway_ and have to
> punch a hole for it.
>
> and as a bonus, we would have shored up our defenses against crappy
> BIOSes as well.

add e820 modification for gart inconsistent setting.

gart_fix_e820=off could be used to disable e820 fix.
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      aaf23042
    • A
      x86: add the "print code before the trapping instruction" feature to 64 bit · a25bd949
      由 Arjan van de Ven 提交于 
      The 32 bit x86 tree has a very useful feature that prints the Code: line
for the code even before the trapping instrution (and the start of the
trapping instruction is then denoted with a <>). Unfortunately, the 64 bit
x86 tree does not yet have this feature, making diagnosing backtraces harder
than needed.

This patch adds this feature in the same was as the 32 bit tree has
(including the same kernel boot parameter), and including a bugfix
to make the code use probe_kernel_address() rarther than a buggy (deadlocking)
__get_user.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      a25bd949
    • H
      x86: 32-bit EFI runtime service support: fixes in sync with 64-bit support · 8b2cb7a8
      由 Huang, Ying 提交于 
      support according to fixes of x86_64 support.

- Delete efi_rt_lock because it is used during system early boot,
  before SMP is initialized.

- Change local_flush_tlb() to __flush_tlb_all() to flush global page
  mapping.

- Clean up includes.

- Revise Kconfig description.

- Enable noefi kernel parameter on i386.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      8b2cb7a8
    • R
      x86 vDSO: consolidate vdso32 · af65d648
      由 Roland McGrath 提交于 
      This makes x86_64's ia32 emulation support share the sources used in the
32-bit kernel for the 32-bit vDSO and much of its setup code.

The 32-bit vDSO mapping now behaves the same on x86_64 as on native 32-bit.
The abi.syscall32 sysctl on x86_64 now takes the same values that
vm.vdso_enabled takes on the 32-bit kernel.  That is, 1 means a randomized
vDSO location, 2 means the fixed old address.  The CONFIG_COMPAT_VDSO
option is now available to make this the default setting, the same meaning
it has for the 32-bit kernel.  (This does not affect the 64-bit vDSO.)

The argument vdso32=[012] can be used on both 32-bit and 64-bit kernels to
set this paramter at boot time.  The vdso=[012] argument still does this
same thing on the 32-bit kernel.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      af65d648
    • I
      x86: various changes and cleanups to in_p/out_p delay details · 6e7c4025
      由 Ingo Molnar 提交于 
      various changes to the in_p/out_p delay details:

- add the io_delay=none method
- make each method selectable from the kernel config
- simplify the delay code a bit by getting rid of an indirect function call
- add the /proc/sys/kernel/io_delay_type sysctl
- change 'io_delay=standard|alternate' to io_delay=0x80 and io_delay=0xed
- make the io delay config not depend on CONFIG_DEBUG_KERNEL
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: N"David P. Reed" <dpreed@reed.com>
      6e7c4025
    • R
      x86: provide a DMI based port 0x80 I/O delay override. · b02aae9c
      由 Rene Herman 提交于 
      x86: provide a DMI based port 0x80 I/O delay override.

Certain (HP) laptops experience trouble from our port 0x80 I/O delay
writes. This patch provides for a DMI based switch to the "alternate
diagnostic port" 0xed (as used by some BIOSes as well) for these.

David P. Reed confirmed that port 0xed works for him and provides a
proper delay. The symptoms of _not_ working are a hanging machine,
with "hwclock" use being a direct trigger.

Earlier versions of this attempted to simply use udelay(2), with the
2 being a value tested to be a nicely conservative upper-bound with
help from many on the linux-kernel mailinglist but that approach has
two problems.

First, pre-loops_per_jiffy calibration (which is post PIT init while
some implementations of the PIT are actually one of the historically
problematic devices that need the delay) udelay() isn't particularly
well-defined. We could initialise loops_per_jiffy conservatively (and
based on CPU family so as to not unduly delay old machines) which
would sort of work, but...

Second, delaying isn't the only effect that a write to port 0x80 has.
It's also a PCI posting barrier which some devices may be explicitly
or implicitly relying on. Alan Cox did a survey and found evidence
that additionally some drivers may be racy on SMP without the bus
locking outb.

Switching to an inb() makes the timing too unpredictable and as such,
this DMI based switch should be the safest approach for now. Any more
invasive changes should get more rigid testing first. It's moreover
only very few machines with the problem and a DMI based hack seems
to fit that situation.

This also introduces a command-line parameter "io_delay" to override
the DMI based choice again:

	io_delay=<standard|alternate>

where "standard" means using the standard port 0x80 and "alternate"
port 0xed.

This retains the udelay method as a config (CONFIG_UDELAY_IO_DELAY) and
command-line ("io_delay=udelay") choice for testing purposes as well.

This does not change the io_delay() in the boot code which is using
the same port 0x80 I/O delay but those do not appear to be a problem
as David P. Reed reported the problem was already gone after using the
udelay version. He moreover reported that booting with "acpi=off" also
fixed things and seeing as how ACPI isn't touched until after this DMI
based I/O port switch I believe it's safe to leave the ones in the boot
code be.

The DMI strings from David's HP Pavilion dv9000z are in there already
and we need to get/verify the DMI info from other machines with the
problem, notably the HP Pavilion dv6000z.

This patch is partly based on earlier patches from Pavel Machek and
David P. Reed.
Signed-off-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      b02aae9c
  35. 26 1月, 2008 2 次提交
  37. 25 1月, 2008 1 次提交
  39. 17 1月, 2008 1 次提交
  41. 12 1月, 2008 1 次提交
  43. 11 1月, 2008 1 次提交
  45. 04 1月, 2008 1 次提交
  47. 26 10月, 2007 1 次提交
  49. 25 10月, 2007 1 次提交
  51. 24 10月, 2007 1 次提交