Before the merge I updated create_pte_mapping() to work for iSeries, by
calling iSeries_hpte_bolt_or_insert. (4c55130b)

Later we changed iSeries_hpte_insert to cope with the bolting case, and called
that instead from create_pte_mapping() (which was renamed to htab_bolt_mapping)
(3c726f8d).

Unfortunately that change introduced a subtle bug, where we pass an absolute
address to iSeries_hpte_insert() where it expects a physical address. This
leads to us calling phys_to_abs() twice on the physical address, which is
seriously bogus.

This only causes a problem if the absolute address from the first translation
can be looked up again in the chunk_map, which depends on the size and layout
of memory. I've seen it fail on one box, but not others.

The minimal fix is to pass the physical address to iSeries_hpte_insert(). For
2.6.17 we should make phys_to_abs() BUG if we try to double-translate an
address.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch fixes a crash in handle_eeh_events,
but ethtool -t still doesnt work right.

...
pepino:~ # cpu 0x3: Vector: 300 (Data Access) at [c00000005192bbe0]
    pc: c00000000004a380: .handle_eeh_events+0xe0/0x23c
    lr: c00000000004a374: .handle_eeh_events+0xd4/0x23c
    sp: c00000005192be60
   msr: 9000000000009032
   dar: 268
 dsisr: 40000000
  current = 0xc0000001fe7bf1a0
  paca    = 0xc00000000048b280
    pid   = 16322, comm = eehd
enter ? for help
[c00000005192bf00] c00000000004a808 .eeh_event_handler+0xcc/0x130
[c00000005192bf90] c000000000025e00 .kernel_thread+0x4c/0x68

...

(none):/# /usr/sbin/ethtool -i eth0
driver: e100
version: 3.5.10-k2-NAPI
firmware-version: N/A
bus-info: 0000:21:01.0
(none):/# /usr/sbin/ethtool -t eth0
Call Trace:
[C00000000F8DEFF0] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000F8DF0A0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000F8DF150] [C000000000049E58] .eeh_check_failure+0x10c/0x138
[C00000000F8DF1E0] [C0000000002DFDB0] .e100_hw_reset+0x70/0xf4
[C00000000F8DF270] [C0000000002E1BBC] .e100_hw_init+0x2c/0x260
[C00000000F8DF310] [C0000000002E2464] .e100_loopback_test+0x8c/0x220
[C00000000F8DF3C0] [C0000000002E28DC] .e100_diag_test+0xdc/0x16c
[C00000000F8DF490] [C000000000420BE0] .dev_ethtool+0xf24/0x14f8
[C00000000F8DF8F0] [C00000000041F4A8] .dev_ioctl+0x5cc/0x740
[C00000000F8DFA20] [C00000000040FEFC] .sock_ioctl+0x3d0/0x404
[C00000000F8DFAC0] [C0000000000D513C] .do_ioctl+0x68/0x108
[C00000000F8DFB50] [C0000000000D56B0] .vfs_ioctl+0x4d4/0x510
[C00000000F8DFC10] [C0000000000D5740] .sys_ioctl+0x54/0x94
[C00000000F8DFCC0] [C0000000000FB6EC] .ethtool_ioctl+0x11c/0x150
[C00000000F8DFD60] [C0000000000F7E40] .compat_sys_ioctl+0x338/0x3bc
[C00000000F8DFE30] [C00000000000871C] syscall_exit+0x0/0x40
EEH: Detected PCI bus error on device 0000:21:01.0
EEH: This PCI device has failed 1 times since last reboot: <NULL> -

modprobe: FATAL: Could not load /lib/modules/2.6.16-rc4-git7/modules.dep: No such file or directory

Cannot get strings: No such device
(none):/#
(none):/# EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2

(none):/# Call Trace:
[C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154
[C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc
[C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c
[C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c
[C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8
[C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110
[C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250
[C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140
[C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68
EEH: Detected PCI bus error on device <NULL>
EEH: This PCI device has failed 1 times since last reboot: <NULL> -
EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2
Call Trace:
[C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154
[C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc
[C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c
[C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c
[C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8
[C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110
[C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250
[C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140
[C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68
EEH: Detected PCI bus error on device <NULL>
EEH: This PCI device has failed 1 times since last reboot: <NULL> -
EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2
Call Trace:
[C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154
[C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc
[C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c
[C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c
[C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8
[C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110
[C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250
[C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140
[C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68
EEH: Detected PCI bus error on device <NULL>
and so on
Signed-off-by: NOlaf Hering <olh@suse.de>
Acked-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A bug in the assembly code of the vdso can cause gettimeofday() to hang
or to return incorrect results. The wrong register was used to test for
pending updates of the calibration variables and to create a dependency
for subsequent loads. This fixes it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Some hotplug driver functions were migrated to the kernel for use by EEH
in commit 2bf6a8fa.

Previously, the PCI Hotplug module had been changed to use the new
OFDT-based PCI probe when appropriate:
5fa80fcd

When rpaphp_pci_config_slot() was moved from the rpaphp driver to the
new kernel function pcibios_add_pci_devices(), the OFDT-based probe
stuff was dropped.  This patch restores it.
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Commit 9ec4b1f3 made kprobes not compile
without module support, so just make that clear in the Kconfig file.

Also, since it's marked EXPERIMENTAL, make that dependency explicit too.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mem= command line option was being ignored in arch/powerpc if we were not
a CONFIG_MULTIPLATFORM (which is handled via prom_init stub). The initial
command line extraction and parsing needed to be moved earlier in the boot
process and have code to actual parse mem= and do something about it.

Also, fixed a compile warning in the file.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Maple firmware does not need PCI resource allocation, and in fact, it
can cause problems in some strange cases.
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Do disable, not enable, the HT APIC IRQ in the function that is
supposed to.
Enable the MPIC IRQ before enabling the downstream APIC IRQ, avoids
potentially losing an interrupt.
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Update defconfigs for g5, pseries and generic ppc64. Default choices
for everything, with the following exceptions:

 * Enable WINDFARM_PM112 on g5 and ppc64.
 * Increase CONFIG_NR_CPUS to 4 in g5_defconfig
 * CONFIG_TIGON3=y instead of =m in g5_defconfig
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

HMT support is currently broken and needs to be reworked to play nicely
with the SMT scheduler. Remove the bit rotten bits for the time being.

I also updated an incorrect comment, we enter __secondary_hold with the
physical cpu id in r3.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The runlatch SPR can take a lot of time to write. My original runlatch
code would set it on every exception entry even though most of the time
this was not required. It would also continually set it in the idle
loop, which is an issue on an SMT capable processor.

Now we cache the runlatch value in a threadinfo bit, and only check for
it in decrementer and hardware interrupt exceptions as well as the idle
loop. Boot on POWER3, POWER5 and iseries, and compile tested on pmac32.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

native_hpte_clear has a spinlock recursion problem with the native_tlbie_lock
being called twice, once in native_hpte_clear() and once within tlbie().
Fix the problem by changing the call to tlbie() in native_hpte_clear() to
__tlbie(). It still supports only 4k pages for now.
Signed-off-by: NR Sharada <sharada@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Disable OProfile in Kconfig for iSeries to prevent hangs.  OProfile
was not originally intended to work with legacy iSeries.
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

altivec_unavailable_exception is called without setting r3... it looks like
the r3 that actually gets passed in as struct pt_regs *regs is the
undisturbed value of r3 at the time the altivec instruction was encountered.
The user actually gets to choose the pt_regs printed in the Oops!

This fixes the oops by passing the correct pt_regs pointer to
altivec_unavailable_exception.
Signed-off-by: NAlan Curry <pacman@TheWorld.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The panic CPU is waiting forever due to some large timeout value if some
CPU is not responding to an IPI.
This patch fixes the problem - the maximum waiting period will be
10 seconds and then the kdump boot will go ahead.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

For kexec we need to know the size of the MMU hash table.

Currently we calculate the size once in the htab code, and then twice more in
the kexec code, once using htab_hash_mask and once using ppc64_pft_size.
On some machines the ppc64_pft_size calculation is broken because
ppc64_pft_size is not set.

So we need to fix the second calculation, but better still we should just
calculate the size once and use it everywhere else.

Tested on Power5 LPAR, Power4 non-LPAR and Power3.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When I changed the hvlpevent_queue code to use a spinlock instead of a
custom atomic (719d1cd8) I didn't
initialise the lock anywhere, oops.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Some recent PowerBook models tend to lose the ethernet PHY on
suspend/resume.  It -seems- that they use a combo ethernet-firewire PHY
chip and the firewire PHY seems to die the same way when that happens.  Not
trying to toggle the firewire cable power appears to fix it.  So this patch
disables changes to the firewire cable power control GPIO on those models.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If the logical and physical cpu ids of a secondary thread don't match, we will
fail to spin the thread up on pSeries machines due to a bug in pseries/smp.c

We call the RTAS "start-cpu" method with the physical cpu id, the address of
pSeries_secondary_smp_init and the value to pass that function in r3. Currently
we pass "lcpu", the logical cpu id, but pSeries_secondary_smp_init expects
the physical cpu id in r3.

We should be passing pcpu instead.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

For UP to SMP kexec to work we need to jump into pSeries_secondary_smp_init
event on a UP + KEXEC kernel. The secondary cpus will not find their hw_cpu_id
in the paca and so they'll jump into kexec_wait, ready for a kexec.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Because smp_release_cpus() is built for SMP || KEXEC, it's not safe to
unconditionally call it from setup_system(). On a UP && KEXEC kernel we'll
start up the secondary CPUs which will then go beserk and we die.

Simple fix is to conditionally call smp_release_cpus() in setup_system(). With
that in place we don't need the dummy definition of smp_release_cpus() because
all call sites are #ifdef'ed either SMP or KEXEC.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fallback gracefully when reading /proc/ppc64/lparcfg when the /rtas
device node can't be found.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A few symbols are exported twice, remove them from ppc_ksyms.c
Remove users of sys_ctrler in arch/ppc/

WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes a regression which was introduced by moving ppc32 to use
the same sort of lockless gettimeofday as ppc64 has been using for
some time.  This involves getting the timebase and performing some
simple arithmetic to convert it to seconds and microseconds.  However,
the factor and offset used there weren't being updated when NTP
varied the tick length using adjtimex.  64-bit didn't notice the
problem because it had a hook in the 32-bit adjtimex compat routine
that attempted to work out what the generic timekeeping code would
do and alter the factor and offset to match.  However, that code
was very complex and it wasn't clear that it still matched what the
generic code would do.

Now we use the generic current_tick_length() routine that was recently
added to check that the current tick will be as long as we expect; if
not we recompute the factor and offset.  This keeps gettimeofday and
xtime in sync.  In addition we check that gettimeofday hasn't got ahead
of xtime on each timer interrupt; if it has, we resync.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We are setting up sources for building external modules like this:

  /usr/src/linux-obj> # create a .config file
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD oldconfig
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD prepare
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD scripts
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD clean

After that, external modules can be built with:

  /usr/src/module> make -C /usr/src/linux-obj M=$PWD

This fails for ppc32 because the `make clean' removes the
arch/powerpc/include directory.  This should be done in archmrproper
instead of in archclean.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Embedded boards that u-boot require a kernel image in the uImage format.
This allows a given board to specify it wants a uImage built by default.

This also fixes a warning at config time, as this symbol is referred
to in arch/powerpc/platforms/83xx/Kconfig.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Registers system call for the powerpc architecture.
Signed-off-by: NJanak Desai <janak@us.ibm.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

With this, new system calls only have to be wired up in one place
for ARCH=ppc and ARCH=powerpc, rather than 2.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

it's int __iomem *, not int * __iomem...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

extern in function definition is an odd thing..
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

drive_info is used only by hd.c and that happens under #ifdef __i386__.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When a cpu is hotplug-onlined, if we don't set per_cpu(last_jiffy) to
something sane, timer_interrupt will execute its while loop for every
tick missed since the cpu was last online (or since the system was
booted, if we're adding a new cpu).  This can cause weird hangs, ssh
sessions dropping, and we can even go xmon if we take a global IPI at
the wrong time.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We call unregister_vpa but we don't check to see if the hypervisor
supports this.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NAnton Blanchard <anton@samba.org>
--
 arch/powerpc/platforms/pseries/setup.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Since 404849bb we've been using
LOAD_REG_ADDRBASE, which uses the toc pointer, in decrementer_iSeries_masked.

This can explode if we take the decrementer interrupt while we're in a module,
because the toc pointer in r2 will be the module's toc pointer.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The code to mark a page as icache dirty (so that it will later be
icache-dcache flushed when we try to execute from it) is duplicated in
three places: flush_dcache_page() does this marking and nothing else,
but clear_user_page() and copy_user_page() duplicate it, since those
functions make the page icache dirty themselves.

This patch makes those other functions call flush_dcache_page()
instead, so the logic's all in one place.  This will make life less
confusing if we ever need to tweak the details of the the lazy icache
flush mechanism.

 arch/powerpc/mm/mem.c |   14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Checking a pointer for NULL before passing it to kfree is pointless, kfree
does its own NULL checking of input.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/kernel/udbg_16550.c: In function `udbg_init_maple_realmode':
arch/powerpc/kernel/udbg_16550.c:162: warning: assignment from incompatible pointer type
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>