Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since the credentials may be allocated during the call to rpc_new_task(),
which again may be called by a memory allocator...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Revert commit 44dd151d "NFS: Don't mark a written page as uptodate until it
is on disk". While it is true that the write may fail, that is always the
case. There is no reason why we should treat data on pages that are not
already marked as PG_uptodate as being special. The only thing we gain is a
noticeable slowdown when re-reading these pages.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If a file is being extended, and we're creating a hole, we might as well
declare the entire page to be up to date.

This patch significantly improves the write performance for sparse files
in the case where lseek(SEEK_END) is used to append several non-contiguous
writes at intervals of < PAGE_SIZE.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The special 'ENOMEM' case that was previously flagged as non-fatal is
bogus: auth_gss always returns EAGAIN for non-fatal errors, and may in fact
return ENOMEM in the special case where xdr_buf_read_netobj runs out of
preallocated buffer space (invariably a _fatal_ error, since there is no
provision for preallocating larger buffers).
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

All errors from call_encode(), with exception of EAGAIN are fatal, so we
should immediately return instead of proceeding to xprt_transmit().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFSv2 file locking currently fails the Connectathon tests, because the
calls to the VFS locking code do not return an EINVAL error if the
struct file_lock overflows the 32-bit boundaries.

The problem is due to the fact that we occasionally call helpers from
fs/locks.c in order to avoid RPC calls to the server when we know that a
local process holds the lock. These helpers are, of course, always
64-bit enabled, so EINVAL is not returned in cases when it would if
the call had gone to the NLM code.

For consistency, we therefore add support for a bounds-checking helper.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The commit 27852596 (nfs: use GFP_NOFS
preloads for radix-tree insertion) appears to have introduced a bug:
We only want to call radix_tree_preload() once after creating a request.
Calling it every time we loop after we created the request, will cause
preemption count leaks.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Nick Piggin <npiggin@suse.de>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  SUNRPC: Fix an rpcbind breakage for the case of IPv6 lookups
  SUNRPC: Fix a double-free in rpcbind
  NFS: Fix readdir cache invalidation

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix 32bit kernels on R4k with 128 byte cache line size
  [MIPS] Atlas, decstation: Fix section mismatches triggered by defconfigs

With the removal of struct file from the xattr code,
reiserfs_file_release() isn't used anymore, so the prealloc isn't
discarded.  This causes hangs later down the line.

This patch adds it to reiserfs_delete_inode.  In most cases it will be a
no-op due to it already having been called, but will avoid hangs with
xattrs.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that rpcb_next_version has been split into an IPv4 version and an IPv6
version, we Oops when rpcb_call_async attempts to look up the IPv6-specific
RPC procedure in rpcb_next_version.

Fix the Oops simply by having rpcb_getport_async pass the correct RPC
procedure as an argument.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It is wrong to be freeing up the rpcbind arguments if the call to
rpcb_call_async() fails, since they should already have been freed up by
rpcb_map_release().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

invalidate_inode_pages2_range() takes page offset arguments, not byte
ranges.

Another thought is that individual pages might perhaps get evicted by VM
pressure, in which case we might perhaps want to re-read not only the
evicted page, but all subsequent pages too (in case the server returns
more/less data per page so that the alignment of the next entry
changes). We should therefore remove the condition that we only do this on
page->index==0.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The generated copy_page for R4k CPU with a 128 byte cache line size used
Create Dirty Exclusive cache line operations even if only part of the
cache line was filled.  This change avoids generating cache operations,
if only part of the cache line size is copied in one loop. It also
increases the maxmimum loop size, because the generated code even fits
into the available space for r4k CPUs with 128 byte cache line size.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Resolve these mismatches by defining affected functions with the __cpuinit
attribute, rather than __init.
Signed-off-by: NShane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  it8213: fix return value in it8213_init_one()
  palm_bk3710: fix IDECLK period calculation
  ide: add __ide_default_irq() inline helper

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The driver uses completely bogus rounding formula for calculating period from
the IDECLK frequency which gives one-off period values (e.g. 11 ns with 100 MHz
IDECLK) which in turn can lead to overclocked IDE transfer timings.  Actually,
rounding is just wrong in this case, so use a mere division for a safe result.

While at it, also:

- give 'ide_palm_clk' variable a more suitable name;

- get rid of the useless 'ideclkp' variable;

- drop the LISP stype 'p' postfix from the 'clkp' variable's name. :-)
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: mcherkashin@ru.mvista.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add __ide_default_irq() inline helper and use it instead of
ide_default_irq() in ide-probe.c and ns87415.c (all host drivers
except IDE PCI ones always setup hwif->irq so it is enough to
check only for I/O bases 0x1f0 and 0x170).

This fixes post-2.6.25 regression since ide_default_irq()
define could shadow ide_default_irq() inline.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] protect _PAGE_SPECIAL bit against mprotect

As Andy Whitcroft recently pointed out, the current powerpc version of
huge_ptep_set_wrprotect() has a bug.  It just calls ptep_set_wrprotect()
which in turn calls pte_update() then hpte_need_flush() with the 'huge'
argument set to 0.  This will cause hpte_need_flush() to flush the wrong
hash entries (of any).  Andy's fix for this is already in the powerpc
tree as commit 016b33c4.

I have confirmed this is a real bug, not masked by some other
synchronization, with a new testcase for libhugetlbfs.  A process write
a (MAP_PRIVATE) hugepage mapping, fork(), then alter the mapping and
have the child incorrectly see the second write.

Therefore, this should be fixed for 2.6.26, and for the stable tree.
Here is a suitable patch for 2.6.26, which I think will also be suitable
for the stable tree (neither of the headers in question has been changed
much recently).

It is cut down slighlty from Andy's original version, in that it does
not include a 32-bit version of huge_ptep_set_wrprotect().  Currently,
hugepages are not supported on any 32-bit powerpc platform.  When they
are, a suitable 32-bit version can be added - the only 32-bit hardware
which supports hugepages does not use the conventional hashtable MMU and
so will have different needs anyway.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stop mprotect's pte_modify from wiping out the s390 pte_special bit, which
caused oops thereafter when vm_normal_page thought X's abnormal was normal.
Debugged-by: NRyan Hope <rmh3093@gmail.com>
Debugged-by: NZan Lynx <zlynx@acm.org>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  Revert "PCI: Correct last two HP entries in the bfsort whitelist"

This reverts commit a1676072.  It duplicates
the change from 8d64c781 and only one should be
applied, otherwise some of the Dell quirks are lost.

Thanks to Tony Camuso for catching this.
Acked-by: NTony Camuso <tcamuso@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

There are various constraints on the use of unit-at-a-time:
 - i386 uses no-unit-at-a-time for pre-4.0 (not 4.3)
 - x86_64 uses unit-at-a-time always

Uli reported a crash on x86_64 with gcc 4.1.2 with unit-at-a-time,
resulting in commit c0a18111

Ingo reported a gcc internal error with gcc 4.3 with no-unit-at-a-timem,
resulting in 22eecde2

Benny Halevy is seeing extern inlines not resolved with gcc 4.3 with
no-unit-at-a-time

This patch reintroduces unit-at-a-time for gcc >= 4.0, bringing back the
possibility of Uli's crash.  If that happens, we'll debug it.

I started seeing both the internal compiler errors and unresolved
inlines on Fedora 9.  This patch fixes both problems, without so far
reintroducing the crash reported by Uli.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Benny Halevy <bhalevy@panasas.com>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  can: add sanity checks
  fs_enet: restore promiscuous and multicast settings in restart()
  ibm_newemac: Fixes entry of short packets
  ibm_newemac: Fixes kernel crashes when speed of cable connected changes
  pasemi_mac: Access iph->tot_len with correct endianness
  ehea: Access iph->tot_len with correct endianness
  ehea: fix race condition
  ehea: add MODULE_DEVICE_TABLE
  ehea: fix might sleep problem
  forcedeth: fix lockdep warning on ethtool -s
  Add missing skb->dev assignment in Frame Relay RX code
  bridge: fix use-after-free in br_cleanup_bridges()
  tcp: fix a size_t < 0 comparison in tcp_read_sock
  tcp: net/ipv4/tcp.c needs linux/scatterlist.h
  libertas: support USB persistence on suspend/resume (resend)
  iwlwifi: drop skb silently for Tx request in monitor mode
  iwlwifi: fix incorrect 5GHz rates reported in monitor mode

A recent patch to legacy_serial.c factored out some code by
using the of_match_node() facility to match a node against
an array of possible matches. However, the patch didn't properly
terminate the array causing potential crashes in cases where no
match is found. In addition, the name of the array was poorly
chosen for a static symbol making debugging harder.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

They print out a pointer in symbolic format, if possible (ie using
symbolic KALLSYMS information).  The '%pS' format is for regular direct
pointers (which can point to data or code and that you find on the stack
during backtraces etc), while '%pF' is for C function pointer types.

On most architectures, the two mean exactly the same thing, but some
architectures use an indirect pointer for C function pointers, where the
function pointer points to a function descriptor (which in turn contains
the actual pointer to the code).  The '%pF' code automatically does the
appropriate function descriptor dereference on such architectures.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This expands the kernel '%p' handling with an arbitrary alphanumberic
specifier extension string immediately following the '%p'.  Right now
it's just being ignored, but the next commit will start adding some
specific pointer type extensions.

NOTE! The reason the extension is appended to the '%p' is to allow
minimal gcc type checking: gcc will still see the '%p' and will check
that the argument passed in is indeed a pointer, and yet will not
complain about the extended information that gcc doesn't understand
about (on the other hand, it also won't actually check that the pointer
type and the extension are compatible).

Alphanumeric characters were chosen because there is no sane existing
use for a string format with a hex pointer representation immediately
followed by alphanumerics (which is what such a format string would have
traditionally resulted in).
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The actual code is the same, just split out into a helper function.
This makes it easier to read, and allows for simple future extension
of %p handling.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The actual code is the same, just split out into a helper function.
This makes it easier to read, and allows for future sharing of the
string code.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: IOAPIC: Fix level-triggered irq injection hang
  x86: KVM guest: Add memory clobber to hypercalls

The pxa27x DMA controller defaults to 64-bit alignment. This caused
the SCR reads to fail (and, depending on card type, error out) when
card->raw_scr was not aligned on a 8-byte boundary.

For performance reasons all scatter-gather addresses passed to
pxamci_request should be aligned on 8-byte boundaries, but if
this can't be guaranteed, byte aligned DMA transfers in the
have to be enabled in the controller to get correct behaviour.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit e8721549.

Andrey Borzenkov reports that it resulted in a totally hung machine for
him when loading the OHCI driver.  Extensive netconsole capture with
SysRq output shows that modprobe gets stuck in ohci_hub_status_data()
when probing and enabling the OHCI controller, see for example

	http://lkml.org/lkml/2008/7/5/236

for an analysis.

The problem appears to be an interrupt flood triggered by the commit
that gets reverted, and Andrey confirmed that the revert makes things
work for him again.
Reported-and-tested-by: NAndrey Borzenkov <arvidjaar@mail.ru>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "remote_irr" variable is used to indicate an interrupt
which has been received by the LAPIC, but not acked.

In our EOI handler, we unset remote_irr and re-inject the
interrupt if the interrupt line is still asserted.

However, we do not set remote_irr here, leading to a
situation where if kvm_ioapic_set_irq() is called, then we go
ahead and call ioapic_service(). This means that IRR is
re-asserted even though the interrupt is currently in service
(i.e. LAPIC IRR is cleared and ISR/TMR set)

The issue with this is that when the currently executing
interrupt handler finishes and writes LAPIC EOI, then TMR is
unset and EOI sent to the IOAPIC. Since IRR is now asserted,
but TMR is not, then when the second interrupt is handled,
no EOI is sent and if there is any pending interrupt, it is
not re-injected.

This fixes a hang only seen while running mke2fs -j on an
8Gb virtio disk backed by a fully sparse raw file, with
aliguori "avoid fragmented virtio-blk transfers by copying"
changes.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Hypercalls can modify arbitrary regions of memory.  Make sure to indicate this
in the clobber list.  This fixes a hang when using KVM_GUEST kernel built with
GCC 4.3.0.

This was originally spotted and analyzed by Marcelo.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Even though the CAN netlayer only deals with CAN netdevices, the 
netlayer interface to the userspace and to the device layer should 
perform some sanity checks.

This patch adds several sanity checks that mainly prevent userspace apps 
to send broken content into the system that may be misinterpreted by 
some other userspace application.
Signed-off-by: NOliver Hartkopp <oliver.hartkopp@volkswagen.de>
Signed-off-by: NUrs Thuermann <urs.thuermann@volkswagen.de>
Acked-by: NAndre Naujoks <nautsch@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>