The primary reason for this change is to prepare for Gen3 support where
there will be more then one possible video source. Each source will have
its own media bus format and code, so it needs to be moved from the per
device structure to a structure used to represent an individual
connection to a video source.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The original drivers code to find a subdevice by looking in the DT grpah
and how the callbacks to the v4l2 async bind framework where poorly
written. The most obvious example of badness was the duplication of data
in the struct rvin_graph_entity.

This patch removes the data duplication, simplifies the parsing of the
DT graph and add checks to the v4l2 callbacks.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The check for if the specific pixelformat is supported on the current
chip should happen in VIDIOC_S_FMT and VIDIOC_TRY_FMT and not when we
try to setup the hardware for streaming.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is done in preparation for Gen3 support where media controller
support will be mandatory for the driver.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix a error from the original driver where v4l2_device_call_until_err()
where used for the pad specific v4l2 operation set_fmt.  Also fix up the
error path from this fix so if there is an error it will be propagated
to the caller.

The error path label have also been renamed as a result from a
nitpicking review comment since we are fixing other issues here.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix a error from the original driver where the wrong error code is
returned if the driver fails to get a IRQ number from
platform_get_irq().
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When Gen3 support is added to the driver more then one possible video
source entity will be possible. Knowing that the name entity is a bad
one, rename it to digital since it will deal with the digital input
source.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Align style with the rest of the driver.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix broken indentations and line breaks.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Now that the build of PDF output on media got fixed, re-add it
to the Sphinx PDF build.

Partially reverts 3eb6cd68 ('Documentation: exclude
media documentation from pdf generation').
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

On some places, either an space or the second ':' is missing.

Fix them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The Sphinx 1.4.x definition for \DUrole is:

\providecommand*{\DUrole}[2]{%
  \ifcsname DUrole#1\endcsname%
    \csname DUrole#1\endcsname{#2}%
  \else% backwards compatibility: try \docutilsrole#1{#2}
    \ifcsname docutilsrole#1\endcsname%
      \csname docutilsrole#1\endcsname{#2}%
    \else%
      #2%
    \fi%
  \fi%
}

This is broken when it is used inside a \begin{alltt} block.
So, replace it by just "#2", as this won't cause troubles, and
it is one of the fallback methods for it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.

While here, improve the documentation to make them to look more
like the rest of the document.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.

While here, improve the documentation to make them to look more
like the rest of the document.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.

While here, improve the documentation to make them to look more
like the rest of the document.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.

While here, improve the documentation, marking the deprecated
ioctls, and making the non-deprecated ones more like the rest
of the media book.

Also, add a notice for ioctls that still require documentation.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Now that we have an override for the c domain that will do
the right thing for the Kernel, stop abusing on the cpp
domain.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Enrich math formulas by using the Sphinx math. That will allow
using those formulas on pdf documents as well.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

* docs-next/docs-next: (51 commits)
  docs-rst: add package adjustbox
  docs-rst: Fix an warning when in interactive mode
  docs-rst: Use better colors for note/warning/attention boxes
  docs-rst: conf.py: adjust the size of .. note:: tag
  docs-rst: add support for LaTeX output
  doc-rst: migrate ioctl CEC_DQEVENT to c-domain
  doc-rst: Revert "kernel-doc: fix handling of address_space tags"
  doc-rst: moved *duplicate* warnings to nitpicky mode
  doc-rst:c-domain: ref-name of a function declaration
  doc-rst: add boilerplate to customize c-domain
  docs: Sphinxify gdb-kernel-debugging.txt and move to dev-tools
  docs: sphinxify kmemcheck.txt and move to dev-tools
  docs: sphinxify kmemleak.txt and move it to dev-tools
  docs: sphinxify ubsan.txt and move it to dev-tools
  docs: sphinxify kasan.txt and move to dev-tools
  docs: sphinixfy gcov.txt and move to dev-tools
  docs: sphinxify kcov.txt and move to dev-tools
  docs: sphinxify sparse.txt and move to dev-tools
  docs: sphinxify coccinelle.txt and add it to dev-tools
  docs: create a new dev-tools directory
  ...

We need adjustbox to allow adjusting the size of tables that
are bigger than the line width. There are quite a few of them
at the media books.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

When XeLaTeX is in interactive mode, it complains that
py@noticelength already exists. Rename it and declare it
only once to avoid such messages.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Instead of painting the box with gray, let's use a colored
box. IMHO, that makes easier to warn users about some issue
pointed by the Sphinx. It also matches to what we do already
with the HTML output.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

While the current implementation works well when using as a
paragraph, it doesn't work properly if inside a table. As we
have quite a few such cases, fix the logic to take the column
size into account.

PS.: I took the logic there from the latest version of Sphinx.sty
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Sphinx supports LaTeX output. Sometimes, it is interesting to
call it directly, instead of also generating a PDF. As it comes
for free, add a target for it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This is only one example, demonstrating the benefits of the patch
series.  The CEC_DQEVENT ioctl is migrated to the sphinx c-domain and
referred by ":name: CEC_DQEVENT".

With this change the indirection using ":ref:`CEC_DQEVENT` is no longer
needed, we can refer the ioctl directly with ":c:func:`CEC_DQEVENT`". As
addition in the index, there is a entry "CEC_DQEVENT (C function)".
Signed-off-by: NMarkus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This reverts commit a88b1672.

From the origin comit log::

  The RST cpp:function handler is very pedantic: it doesn't allow any
  macros like __user on it

Since the kernel-doc parser does NOT make use of the cpp:domain, there
is no need to change the kernel-doc parser eleminating the address_space
tags.
Signed-off-by: NMarkus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Moved the *duplicate C object description* warnings for function
declarations in the nitpicky mode. In nitpick mode, you can suppress
those warnings (e.g. ioctl) with::

  nitpicky = True
  nitpick_ignore = [
      ("c:func", "ioctl"),
  ]

See Sphinx documentation for the config values for ``nitpick`` and
``nitpick_ignore`` [1].

With this change all the ".. cpp:function:: int ioctl(..)" descriptions
(found in the media book) can be migrated to ".. c:function:: int
ioctl(..)", without getting any warnings. E.g.::

  .. cpp:function:: int ioctl( int fd, int request, struct cec_event *argp )

  .. c:function:: int ioctl( int fd, int request, struct cec_event *argp )

The main effect, is that we get those *CPP-types* back into Sphinx's C-
namespace and we need no longer to distinguish between c/cpp references,
when we refer a function like the ioctl.

[1] http://www.sphinx-doc.org/en/stable/config.html?highlight=nitpick#confval-nitpickySigned-off-by: NMarkus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Add option 'name' to the "c:function:" directive.  With option 'name'
the ref-name of a function can be modified. E.g.::

    .. c:function:: int ioctl( int fd, int request )
       :name: VIDIOC_LOG_STATUS

The func-name (e.g. ioctl) remains in the output but the ref-name
changed from ``ioctl`` to ``VIDIOC_LOG_STATUS``. The index entry for
this function is also changed to ``VIDIOC_LOG_STATUS`` and the function
can now referenced by::

    :c:func:`VIDIOC_LOG_STATUS`
Signed-off-by: NMarkus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Add a sphinx-extension to customize the sphinx c-domain.  No functional
changes right yet, just the boilerplate code.
Signed-off-by: NMarkus Heiser <markus.heiser@darmarIT.de>
[ jc: coding-style tweak ]
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Add the MAINTAINERS' entry for Microchip / Atmel Image Sensor Controller.
Signed-off-by: NSongjun Wu <songjun.wu@microchip.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

DT binding documentation for ISC driver.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSongjun Wu <songjun.wu@microchip.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add driver for the Image Sensor Controller. It manages
incoming data from a parallel based CMOS/CCD sensor.
It has an internal image processor, also integrates a
triple channel direct memory access controller master
interface.
Signed-off-by: NSongjun Wu <songjun.wu@microchip.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

On some places, either an space or the second ':' is missing.

Fix them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are several minor issues that are seen when building
PDF on interactive mode.

Fix them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

A few tables are not properly output on LaTeX format.

Fix them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

One table here is not being properly displayed on LaTeX
format. Adjust it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The table is too big to fit into a single page on LaTeX format.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>