Now that cic's are immediately unlinked under both locks, there's no
need to count and drain cic's before module unload.  RCU callback
completion is waited with rcu_barrier().

While at it, remove residual RCU operations on cic_list.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that all cic's are immediately unlinked from both ioc and queue,
lazy dropping from lookup path and trimming on elevator unregister are
unnecessary.  Kill them and remove now unused elevator_ops->trim().

This also leaves call_for_each_cic() without any user.  Removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

attempt_plug_merge() accesses elevator without holding queue_lock and
may call into ->elevator_bio_merge_fn().  The elvator is guaranteed to
be valid because it's accessed iff the plugged list has requests and
elevator is never exited with live requests, so as long as the
elevator method can deal with unlocked access, this is safe.

Explain the sync rules around attempt_plug_merge() and drop the
unnecessary @tsk parameter.

This patch doesn't introduce any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Hi, Jens,

If you recall, I posted an RFC patch for this back in July of last year:
http://lkml.org/lkml/2010/7/13/279

The basic problem is that a process can issue a never-ending stream of
async direct I/Os to the same sector on a device, thus starving out
other I/O in the system (due to the way the alias handling works in both
cfq and deadline).  The solution I proposed back then was to start
dispatching from the fifo after a certain number of aliases had been
dispatched.  Vivek asked why we had to treat aliases differently at all,
and I never had a good answer.  So, I put together a simple patch which
allows aliases to be added to the rb tree (it adds them to the right,
though that doesn't matter as the order isn't guaranteed anyway).  I
think this is the preferred solution, as it doesn't break up time slices
in CFQ or batches in deadline.  I've tested it, and it does solve the
starvation issue.  Let me know what you think.

Cheers,
Jeff
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Merge it with __elv_add_request(), it's pretty pointless to
have a function with only two callers. The main interface
is elv_add_request()/__elv_add_request().
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

One of the disadvantages of on-stack plugging is that we potentially
lose out on merging since all pending IO isn't always visible to
everybody. When we flush the on-stack plugs, right now we don't do
any checks to see if potential merge candidates could be utilized.

Correct this by adding a new insert variant, ELEVATOR_INSERT_SORT_MERGE.
It works just ELEVATOR_INSERT_SORT, but first checks whether we can
merge with an existing request before doing the insertion (if we fail
merging).

This fixes a regression with multiple processes issuing IO that
can be merged.

Thanks to Shaohua Li <shaohua.li@intel.com> for testing and fixing
an accounting bug.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.

The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.

The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The current FLUSH/FUA support has evolved from the implementation
which had to perform queue draining.  As such, sequencing is done
queue-wide one flush request after another.  However, with the
draining requirement gone, there's no reason to keep the queue-wide
sequential approach.

This patch reimplements FLUSH/FUA support such that each FLUSH/FUA
request is sequenced individually.  The actual FLUSH execution is
double buffered and whenever a request wants to execute one for either
PRE or POSTFLUSH, it queues on the pending queue.  Once certain
conditions are met, a flush request is issued and on its completion
all pending requests proceed to the next sequence.

This allows arbitrary merging of different type of flushes.  How they
are merged can be primarily controlled and tuned by adjusting the
above said 'conditions' used to determine when to issue the next
flush.

This is inspired by Darrick's patches to merge multiple zero-data
flushes which helps workloads with highly concurrent fsync requests.

* As flush requests are never put on the IO scheduler, request fields
  used for flush share space with rq->rb_node.  rq->completion_data is
  moved out of the union.  This increases the request size by one
  pointer.

  As rq->elevator_private* are used only by the iosched too, it is
  possible to reduce the request size further.  However, to do that,
  we need to modify request allocation path such that iosched data is
  not allocated for flush requests.

* FLUSH/FUA processing happens on insertion now instead of dispatch.

- Comments updated as per Vivek and Mike.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

__get_cpu_var() can be replaced with this_cpu_read and will then use a
single read instruction with implied address calculation to access the
correct per cpu instance.

However, the address of a per cpu variable passed to __this_cpu_read()
cannot be determined (since it's an implied address conversion through
segment prefixes).  Therefore apply this only to uses of __get_cpu_var
where the address of the variable is not used.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hughd@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

This reverts commit 7681bfee.

Conflicts:

	include/linux/genhd.h

It has numerous issues with the cleanup path and non-elevator
devices. Revert it for now so we can come up with a clean
version without rushing things.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

/proc/diskstats would display a strange output as follows.

$ cat /proc/diskstats |grep sda
   8       0 sda 90524 7579 102154 20464 0 0 0 0 0 14096 20089
   8       1 sda1 19085 1352 21841 4209 0 0 0 0 4294967064 15689 4293424691
                                                ~~~~~~~~~~
   8       2 sda2 71252 3624 74891 15950 0 0 0 0 232 23995 1562390
   8       3 sda3 54 487 2188 92 0 0 0 0 0 88 92
   8       4 sda4 4 0 8 0 0 0 0 0 0 0 0
   8       5 sda5 81 2027 2130 138 0 0 0 0 0 87 137

Its reason is the wrong way of accounting hd_struct->in_flight. When a bio is
merged into a request belongs to different partition by ELEVATOR_FRONT_MERGE.

The detailed root cause is as follows.

Assuming that there are two partition, sda1 and sda2.

1. A request for sda2 is in request_queue. Hence sda1's hd_struct->in_flight
   is 0 and sda2's one is 1.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

2. A bio belongs to sda1 is issued and is merged into the request mentioned on
   step1 by ELEVATOR_BACK_MERGE. The first sector of the request is changed
   from sda2 region to sda1 region. However the two partition's
   hd_struct->in_flight are not changed.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

3. The request is finished and blk_account_io_done() is called. In this case,
   sda2's hd_struct->in_flight, not a sda1's one, is decremented.

        | hd_struct->in_flight
   ---------------------------
   sda1 |         -1
   sda2 |          1
   ---------------------------

The patch fixes the problem by caching the partition lookup
inside the request structure, hence making sure that the increment
and decrement will always happen on the same partition struct. This
also speeds up IO with accounting enabled, since it cuts down on
the number of lookups we have to do.

When reloading partition tables, quiesce IO to ensure that no
request references to the partition struct exists. When it is safe
to free the partition table, the IO for that device is restarted
again.
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

2.6.36 introduces an API for drivers to switch the IO scheduler
instead of manually calling the elevator exit and init functions.
This API was added since q->elevator must be cleared in between
those two calls. And since we already have this functionality
directly from use by the sysfs interface to switch schedulers
online, it was prudent to reuse it internally too.

But this API needs the queue to be in a fully initialized state
before it is called, or it will attempt to unregister elevator
kobjects before they have been added. This results in an oops
like this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000051
IP: [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
PGD 47ddfc067 PUD 47c6a1067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.1/irq
CPU 2
Modules linked in: t(+) loop hid_apple usbhid ahci ehci_hcd uhci_hcd libahci usbcore nls_base igb

Pid: 7319, comm: modprobe Not tainted 2.6.36-rc6+ #132 QSSC-S4R/QSSC-S4R
RIP: 0010:[<ffffffff8116f15e>]  [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
RSP: 0018:ffff88027da25d08  EFLAGS: 00010246
RAX: ffff88047c68c528 RBX: 00000000fffffffe RCX: 0000000000000000
RDX: 000000000000002f RSI: 000000000000002f RDI: ffff88047e196c88
RBP: ffff88027da25d38 R08: 0000000000000000 R09: d84156c5635688c0
R10: d84156c5635688c0 R11: 0000000000000000 R12: ffff88047e196c88
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88047c68c528
FS:  00007fcb0b26f6e0(0000) GS:ffff880287400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000051 CR3: 000000047e76e000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 7319, threadinfo ffff88027da24000, task ffff88027d377090)
Stack:
 ffff88027da25d58 ffff88047c68c528 00000000fffffffe ffff88047e196c88
<0> ffff88047c68c528 ffff88047e05bd90 ffff88027da25d78 ffffffff8123fb77
<0> ffff88047e05bd90 0000000000000000 ffff88047e196c88 ffff88047c68c528
Call Trace:
 [<ffffffff8123fb77>] kobject_add_internal+0xe7/0x1f0
 [<ffffffff8123fd98>] kobject_add_varg+0x38/0x60
 [<ffffffff8123feb9>] kobject_add+0x69/0x90
 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
 [<ffffffff8103d48d>] ? sub_preempt_count+0x9d/0xe0
 [<ffffffff8143de20>] ? _raw_spin_unlock+0x30/0x50
 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
 [<ffffffff8116eff4>] ? sysfs_remove_dir+0x34/0xa0
 [<ffffffff81224204>] elv_register_queue+0x34/0xa0
 [<ffffffff81224aad>] elevator_change+0xfd/0x250
 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
 [<ffffffffa007e0a8>] t_init+0xa8/0x361 [t]
 [<ffffffff810001de>] do_one_initcall+0x3e/0x170
 [<ffffffff8108c3fd>] sys_init_module+0xbd/0x220
 [<ffffffff81002f2b>] system_call_fastpath+0x16/0x1b
Code: e5 41 56 41 55 41 54 49 89 fc 53 48 83 ec 10 48 85 ff 74 52 48 8b 47 18 49 c7 c5 00 46 61 81 48 85 c0 74 04 4c 8b 68 30 45 31 f6 <41> 80 7d 51 00 74 0e 49 8b 44 24 28 4c 89 e7 ff 50 20 49 89 c6
RIP  [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
 RSP <ffff88027da25d08>
CR2: 0000000000000051
---[ end trace a6541d3bf07945df ]---

Fix this by adding a registered bit to the elevator queue, which is
set when the sysfs kobjects have been registered.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Currently drivers must do an elevator_exit() + elevator_init()
to switch IO schedulers. There are a few problems with this:

- Since commit 1abec4fd,
  elevator_init() requires a zeroed out q->elevator
  pointer. The two existing in-kernel users don't do that.

- It will only work at initialization time, since using the
  above two-staged construct does not properly quisce the queue.

So add elevator_change() which takes care of this, and convert
the elv_iosched_store() sysfs interface to use this helper as well.
Reported-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reported-by: NKevin Vigor <kevin@vigor.nu>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This includes both the number of bios merged into requests belonging to this
cgroup as well as the number of requests merged together.
In the past, we've observed different merging behavior across upstream kernels,
some by design some actual bugs. This stat helps a lot in debugging such
problems when applications report decreased throughput with a new kernel
version.

This needed adding an extra elevator function to capture bios being merged as I
did not want to pollute elevator code with blkiocg knowledge and hence needed
the accounting invocation to come from CFQ.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

struct request has had a few different ways to represent some
properties of a request.  ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers.  The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion.  In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.

Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size.  This is more convoluted than the hard_ case.

rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests.  rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests.  This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.

rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front.  This is mainly used by drivers
which transfers data by walking request segment-by-segment.  This
value always equals rq->bio->bi_size >> 9.  However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.

In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs.  With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly.  Drop all the duplicates.  Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length.  Everything else is
defined in terms of these three and available only through accessors.

* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
  now handles pc and fs requests equally other than rq->sector update.
  This means that now pc requests can use partial completion too (no
  in-kernel user yet tho).

* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
  now uses byte count as the primary data length.

* blk_rq_pos() is now guranteed to be always correct.  In-block users
  converted.

* blk_rq_bytes() is now guaranteed to be always valid as is
  blk_rq_sectors().  In-block users converted.

* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
  More convenient one is used.

* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
  pointer to request.

[ Impact: API cleanup, single way to represent one property of a request ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This forces in_flight to be zero when turning off or on the I/O stat
accounting and stops updating I/O stats in attempt_merge() when
accounting is turned off.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Just use struct elevator_queue everywhere instead.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch adds support for controlling the IO completion CPU of
either all requests on a queue, or on a per-request basis. We export
a sysfs variable (rq_affinity) which, if set, migrates completions
of requests to the CPU that originally submitted it. A bio helper
(bio_set_completion_cpu()) is also added, so that queuers can ask
for completion on that specific CPU.

In testing, this has been show to cut the system time by as much
as 20-40% on synthetic workloads where CPU affinity is desired.

This requires a little help from the architecture, so it'll only
work as designed for archs that are using the new generic smp
helper infrastructure.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

elv_register() always returns 0, and there isn't anything it does where
it should return an error (the only error condition is so grave that
it's handled with a BUG_ON).
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Currently we allow any merge, even if the io originates from different
processes. This can cause really bad starvation and unfairness, if those
ios happen to be synchronous (reads or direct writes).

So add a allow_merge hook to the io scheduler ops, so an io scheduler can
help decide whether a bio/process combination may be merged with an
existing request.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

- ->init_queue() does not need the elevator passed in
- ->put_request() is a hot path and need not have the queue passed in
- cfq_update_io_seektime() does not need cfqd passed in
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

elevator_type field in elevator_type structure is useless:
it isn't used anywhere in kernel sources.
Signed-off-by: NVasily Tarasov <vtaras@openvz.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

None of the in-kernel primitives for handling "atomic" counting seem
to be a good fit. We need something that is essentially free for
incrementing/decrementing, while the read side may be more expensive
as we only ever need to do that when a device is removed from the
kernel.

Use a per-cpu variable for maintaining a per-cpu ioc count and define
a reading mechanism that just sums up the values.
Signed-off-by: NJens Axboe <axboe@suse.de>

It's not needed for anything, so kill the bio passing.
Signed-off-by: NJens Axboe <axboe@suse.de>

The io schedulers can use this instead of having to allocate space for
it themselves.
Signed-off-by: NJens Axboe <axboe@suse.de>

The rbtree sort/lookup/reposition logic is mostly duplicated in
cfq/deadline/as, so move it to the elevator core. The io schedulers
still provide the actual rb root, as we don't want to impose any sort
of specific handling on the schedulers.

Introduce the helpers and rb_node in struct request to help migrate the
IO schedulers.
Signed-off-by: NJens Axboe <axboe@suse.de>

Right now, every IO scheduler implements its own backmerging (except for
noop, which does no merging). That results in duplicated code for
essentially the same operation, which is never a good thing. This patch
moves the backmerging out of the io schedulers and into the elevator
core. We save 1.6kb of text and as a bonus get backmerging for noop as
well. Win-win!
Signed-off-by: NJens Axboe <axboe@suse.de>

There's a race between shutting down one io scheduler and firing up the
next, in which a new io could enter and cause the io scheduler to be
invoked with bad or NULL data.

To fix this, we need to maintain the queue lock for a bit longer.
Unfortunately we cannot do that, since the elevator init requires to be
run without the lock held.  This isn't easily fixable, without also
changing the mempool API.  So split the initialization into two parts,
and alloc-init operation and an attach operation.  Then we can
preallocate the io scheduler and related structures, and run the attach
inside the lock after we detach the old one.

This patch has survived 30 minutes of 1 second io scheduler switching
with a very busy io load.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

q->ordcolor must only be flipped on initial queueing of a hardbarrier
request.

Constructing ordered sequence and requeueing used to pass through
__elv_add_request() which flips q->ordcolor when it sees a barrier
request.

This patch separates out elv_insert() from __elv_add_request() and uses
elv_insert() when constructing ordered sequence and requeueing.
elv_insert() inserts the given request at the specified position and
does nothing else.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>

elv_try_last_merge().
Signed-off-by: NCoywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

Reimplement handling of barrier requests.

* Flexible handling to deal with various capabilities of
  target devices.
* Retry support for falling back.
* Tagged queues which don't support ordered tag can do ordered.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJens Axboe <axboe@suse.de>