The number of chunks/chunks_array may be passed in
by userspace and can be large.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChen Li <chenli@uniontech.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:2252:40-45: WARNING: conversion
to bool not needed here.
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the register offset isn't needed division by 4 to pass RREG32_PCIE()
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add SECUREDISPLAY TA firmware info in amdgpu_fimrware_info()
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

refine PSP TA firmware info print in amdgpu_firmware_info().
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch is to correct the name of one function for vangogh.
This function is used to print the clock levels of all kinds of IP
components.
Signed-off-by: NXiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c:298:33-38:
WARNING: conversion to bool not needed here.
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The number of chunks/chunks_array may be passed in
by userspace and can be large.

It has been observed to cause kcalloc failures from trinity fuzzy test:

 WARNING: CPU: 0 PID: 5487 at mm/page_alloc.c:4385
 __alloc_pages_nodemask+0x2d8/0x14d0

Obviously, the required order in this case is larger than MAX_ORDER.
So, just use kvmalloc instead.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChen Li <chenli@uniontech.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

clang points out that the new logic uses an always-uninitialized
array index:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9810:38: warning: variable 'i' is uninitialized when used here [-Wuninitialized]
                        timing  = &edid->detailed_timings[i];
                                                          ^
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9720:7: note: initialize the variable 'i' to silence this warning

My best guess is that the index should have been returned by the
parse_hdmi_amd_vsdb() function that walks an array here, so do that.

Fixes: f9b4f20c ("drm/amd/display: Add Freesync HDMI support to DM")
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently if stream->signal is neither SIGNAL_TYPE_DISPLAY_PORT_MST or
SIGNAL_TYPE_DISPLAY_PORT then variable ret is uninitialized and this is
checked for > 0 at the end of the function.  Ret should be initialized,
I believe setting it to zero is a correct default.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: bd0c064c ("drm/amd/display: Add return code instead of boolean for future use")
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It works fine and was only disabled because primary GPUs
don't enter runpm if there is a console bound to the fbdev due
to the kmap.  This will at least allow runpm on secondary cards.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The S0ix check only makes sense if the AMD PMC driver is
present.  We need to use the legacy S3 pathes when the
PMC driver is not present.
Reviewed-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu DM handles INTERRUPT_LOW_IRQ_CONTEXT interrupt(hpd, hpd_rx) by using work
queue and uses single work_struct. If new interrupt is recevied before the
previous handler finished, new interrupts(same type) will be discarded and
driver just sends "amdgpu_dm_irq_schedule_work FAILED" message out. If some
important hpd, hpd_rx related interrupts are missed by driver the hot (un)plug
devices may cause system hang or instability, such as issues with system
resume from S3 sleep with mst device connected.

This patch dynamically allocates new amdgpu_dm_irq_handler_data for new
interrupts if previous INTERRUPT_LOW_IRQ_CONTEXT interrupt work has not been
handled. So the new interrupt works can be queued to the same workqueue_struct,
instead of discard the new interrupts. All allocated amdgpu_dm_irq_handler_data
are put into a single linked list and will be reused after.
Signed-off-by: NXiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Synchronization displays with different timings feature uses
reminder of 64 bit division (modulus operator) , which is not
supported by 32 bit platforms

[how]
Use div64 API for 64 bit modulus
Signed-off-by: NVladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Bindu Ramamurthy<bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Synchronization displays with different timings feature uses division
operator for 64 bit division, which is not supported by 32 bit platforms

[how]
Use div64 API for 64 bit division
Signed-off-by: NVladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Bindu Ramamurthy<bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Request to stop DF performance counters is missing the actual write to the
controller register.
Reported-by: NChris Freehill <chris.freehill@amd.com>
Signed-off-by: NJonathan Kim <jonathan.kim@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why?]
HSplit should not affect DSC slice count. Can cause improper timings to
be applied for certain modes.

[How?]
No longer change DSC Slice count based on HSplit.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NDillon Varone <dillon.varone@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
1. Driver use umachannelnumber to calculate watermarks for stutter.
In asymmetric memory config, the actual bandwidth is less than
dual-channel. The bandwidth should be the same as single-channel.
2. We found single rank dimm need additional delay time for stutter.

[How]
Get information from each DIMM. Treat memory config as a single-channel
for asymmetric memory in bandwidth calculating. Add additional delay
time for single rank dimm.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NHugo Hu <hugo.hu@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DC version 3.2.125 brings improvements in multiple areas. In summary, we
highlight:

- DSC fixes
- Enable ASSR
- Firmware relase 0.0.54
- eDP interface refactor for multiple eDP
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
DMUB FW send trace event via outbox0 interrupt.  Driver will handle it.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
GPINT timeout is causing PSR_STATE_0 to be returned when it shouldn't.
We must guarantee that PSR is fully disabled before doing hw programming
on driver-side.

[How]
Return invalid state if GPINT command times out. Let existing retry
logic send the GPINT until successful.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Some existing DC interfaces are optimized to return a single eDP
link/stream. Refactored those DC interfaces to support multiple eDP.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Useful for testing when setting a max bpc value higher than the default
is required

[How]
Allow for reading/writing of the max_requested_bpc property of the
connector
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NIlya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Add flag to build infopacket in SDP v1.3 format
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NMax.Tseng <Max.Tseng@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently the creation of link encoder objects is tightly coupled to the
creation of link objects. Decoupling link encoder object creation is a
preliminary step in the process of allowing link encoders to be
dynamically assigned to links.

[How]
Add "minimal" link encoder objects which are not associated with any
link until required.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes.

[HOW]
1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands
   to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd
   with DCN and sends reply back in an outbox1 message triggering an
   outbox1 interrupt to driver.
2) In existing driver implementation, AUX commands are processed
   synchronously by configuring DCN reg. But in DMUB AUX, driver sends an
   inbox1 message and waits for a conditional variable (CV) which will be
   signaled by outbox1 ISR.
3) As the driver holds dal and dc locks while waiting for CV, the outbox1
   ISR is registered with noMutexWait set to true, which allows ISR to run
   and signal CV. This sets a constraint on ISR to not modify variables
   such as dc, dmub, etc.
4) Created dmub_outbox.c with dmub_enable_outbox_notification() to enable
   outbox1 mailbox.
5) New mailbox address ranges allocated for outbox1 of size DMUB_RB_SIZE.
   Created dmub functions for Outbox1: dmub_dcn20_setup_out_mailbox(),
   dmub_dcn20_get_outbox1_wptr() and dmub_dcn20_set_outbox1_rptr().
6) Added functions dc_stat_get_dmub_notification() and
   dmub_srv_stat_get_notification() to retrieve Outbox1 message.
7) Currently, DMUB doesn't opens DDC in AUX mode before issuing AUX
   transaction. A workaround is added in dce_aux_transfer_dmub_raw() to
   open in DDC in AUX mode for every AUX transaction.
8) Added dc debug option enable_dmub_aux_for_legacy_ddc enable/disable
   DMUB AUX. This debug option is checked dce_aux_transfer_with_retries()
   to select the method to process AUX transactions.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NMeenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

By using the information provided by PMFW when available.

V2: put those structures shared around SMU V11 ASICs in
    smu_v11_0.h
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

New changes were involved for the SmuMetrics structure.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

miss RAP TA in loop. (when i == 4)

Fix:
drm/amdgpu: add RAP TA version print in amdgpu_firmware_info
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reported-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c:273:16-21: WARNING:
conversion to bool not needed here.
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c:924:47-52:
WARNING: conversion to bool not needed here.
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the number of badpage records exceed the threshold, driver has
updated both epprom header and control->tbl_hdr.header before gpu reset,
therefore GPU recovery thread no need to read epprom header directly.

v2: merge amdgpu_ras_check_err_threshold into amdgpu_ras_eeprom_check_err_threshold
Signed-off-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

report -ENOTSUPP instead of -EINVAL, so that if userspace
fails to read sensor data can figure it out the failure correctly.
Signed-off-by: NShirish S <shirish.s@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Arcturus has a different register address from other SMU V11
ASICs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add RAP TA version print in amdgpu_firmware_info.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c:243:67-72:
WARNING: conversion to bool not needed here.
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1589:0-23: WARNING:
fops_ib_preempt should be defined with DEFINE_DEBUGFS_ATTRIBUTE
./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1592:0-23: WARNING:
fops_sclk_set should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Per discussions with PMFW team, the driver only needs to
notify the PMFW when the RLC is disabled.  The RLC FW will notify
the PMFW directly when it's enabled.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Making them an error confuses users and the errors are harmless
as not all asics support all profiles.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1488Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>