Reuse OMAP4 operations on AM43x.

Context related ops are not used on AM43x, as this would not add value
when using DT and AM43x is DT only boot. This additionally helps not to
add context register offset for each hwmod.
Signed-off-by: NAmbresh K <ambresh@ti.com>
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Acked-by: NRajendra Nayak <rnayak@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Now that we have DT bindings to specify which devices should not
be reset and idled during init, make hwmod extract the information
(and store them in internal flags) from Device tree.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The hwmod init sequence involves initializing and idling all the
hwmods during bootup. If a module class has sysconfig, the init
sequence utilizes the module register base for performing any
sysc configuration.

The module address space is being removed from hwmod database and
retrieved from the <reg> property of the corresponding DT node.
If a hwmod does not have its corresponding DT node defined and the
memory address space is not defined in the corresponding
omap_hwmod_ocp_if, then the module register target address space
would be NULL and any sysc programming would result in a NULL
pointer dereference and a kernel boot hang.

Handle this scenario by checking for a valid module address space
during the _init of each hwmod, and leaving it in the registered
state if no module register address base is defined in either of
the hwmod data or the DT data.
Signed-off-by: NSuman Anna <s-anna@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: NNishanth Menon <nm@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
[paul@pwsan.com: use -ENXIO rather than -ENOMEM to indicate a missing address
 space error; fixed checkpatch.pl problem]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Currently, whenever we idle a device _idle_sysc() is called and writes to the
devices SYSCONFIG register to set the idle mode. A lot devices are using the
smart-idle mode and so the write to the SYSCONFIG register is programming the
same value that is already stored in the register.

Writes to the devices SYSCONFIG register can be slow, for example, writing to
the DMTIMER SYSCONFIG register takes 3 interface clock cycles and 3 functional
clock cycles. If the DMTIMER is using the slow 32kHz functional clock this can
take ~100us.

Furthermore, during boot on an OMAP4430 panda board, I see that there are 100
calls to _idle_sysc(), however, only 3 out of the 100 calls actually write
the SYSCONFIG register with a new value.

Therefore, to avoid unnecessary writes to device SYSCONFIG registers when
idling the device, only write the value if the value has changed. It should be
safe to do this on idle as the context of the register will never be lost while
the device is active.

Verified that suspend, CORE off and retention states are working with this
change on OMAP3430 Beagle board.
Signed-off-by: NJon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The soc_ops for dra7xx devices can be completed reused
from the ones used for omap4 and omap5 devices.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NR Sricharan <r.sricharan@ti.com>

Address space is being removed from hwmod database and DT information
in <reg> property is being used. Currently the 0th index of device
address space is used to map for register target address. This is not
always true, eg. cpgmac has it's sysconfig in second address space.

Handle it by specifying index of device address space to be used for
register target. As default value of this field would be zero with
static initialization, existing behaviour of using first address space
for register target while using DT would be kept as such.
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Tested-by: NMugunthan V N <mugunthanvnm@ti.com>
[paul@pwsan.com: use u8 rather than int to save memory]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

With the OMAP serial driver sysc cleanup patches in this series, we can
now remove the hwmod external apis for sysc fiddling.

While at this, also remove unused sysc auto idle api from hwmod code.
Tested-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NRajendra nayak <rnayak@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>  # OMAP4/Panda
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Some IPs (like UART) need the sidle mode to be controlled in SW only
while they are active. Once they go inactive, they need the IP to be
put back in HW control so they are also wakeup capable.

The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle
mode to be *always* controlled in SWSUP. We now have a need to control
IPs sidle mode in SWSUP only while its active.

So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework
know about these new IP requirements.
Tested-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>  # OMAP4/Panda
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

_enable_sysc() and _idle_sysc() handle the midle mode programming correctly
and program HWMOD_IDLEMODE_SMART or HWMOD_IDLEMODE_SMART_WKUP respectively
for supported IPs (The ones which support hardware controlled midle modes)

However the same programming logic is missing when it comes to sidle mode
programming. Here they seem to just set HWMOD_IDLEMODE_SMART (Again for the
ones which support hardware controlled sidle modes)

This problem was hidden due to the fact that a call to _enable_wakeup()
in those same functions would overwrite the idlemodes and program them
correctly (to HWMOD_IDLEMODE_SMART_WKUP in the supported cases)

So fix the sidlemode handling correctly in these functions and handle the
_enable_wakeup() for SIDLEMODE supported IPs same as the way its handled
for MIDLEMODE supported ones.
Tested-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>  # OMAP4/Panda
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

_enable_preprogram is marked as __init, but is called from _enable
which is not. Without this patch, the board oopses after init. Tested
on custom hardware and on beagle board xM. Otherwise we can get:

Unable to handle kernel paging request at virtual address 000b0012
pgd = cf968000
*pgd=8fb06831, *pte=00000000, *ppte=00000000
PREEMPT ARM
Modules linked in:
CPU: 0    Not tainted  (3.9.0 #2)
PC is at _enable_preprogram+0x1c/0x24
LR is at omap_hwmod_enable+0x34/0x60
   psr: 80000093
sp : cf95de08  ip : 00002de5  fp : bec33d4c
r10: 00000000  r9 : 00000002  r8 : b6dd2c78
r7 : 00000004  r6 : 00000000  r5 : a0000013  r4 : cf95c000
r3 : 00000000  r2 : b6dd2c7c  r1 : 00000000  r0 : 000b0012
Flags: Nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: 8f968019  DAC: 00000015
Process otpcmd (pid: 607, stack limit = 0xcf95c230)
Stack: (0xcf95de08 to 0xcf95e000)
de00:                   00000001 cf91f840 00000000 c001d6fc 00000002 cf91f840
de20: cf8f7e10 c001de54 cf8f7e10 c001de78 c001de68 c01d5e80 00000000 cf8f7e10
de40: cf8f7e10 c01d5f28 cf8f7e10 c0530d30 00000000 c01d6f28 00000000 c0088664
de60: b6ea1000 cfb05284 cf95c000 00000001 cf95c000 60000013 00000001 cf95dee4
de80: cf870050 c01d7308 cf870010 cf870050 00000001 c0278b14 c0526f28 00000000
dea0: cf870050 ffff8e18 00000001 cf95dee4 00000000 c0274f7c cf870050 00000001
dec0: cf95dee4 cf1d8484 000000e0 c0276464 00000008 cf9c0000 00000007 c0276980
dee0: cf9c0000 00000064 00000008 cf1d8404 cf1d8400 c01cc05c 0000270a cf1d8504
df00: 00000023 cf1d8484 00000007 c01cc670 00000bdd 00000001 00000000 cf449e60
df20: cf1dde70 cf1d8400 bec33d18 cf1d8504 c0246f00 00000003 cf95c000 00000000
df40: bec33d4c c01cd078 00000003 cf1d8504 00000081 c01cbcb8 bec33d18 00000003
df60: bec33d18 c00a9034 00002000 c00a9c68 cf92fe00 00000003 c0246f00 cf92fe00
df80: 00000000 c00a9cb0 00000003 00000000 00008e70 00000000 b6f17000 00000036
dfa0: c000e484 c000e300 00008e70 00000000 00000003 c0246f00 bec33d18 bec33d18
dfc0: 00008e70 00000000 b6f17000 00000036 00000000 00000000 b6f6d000 bec33d4c
dfe0: b6ea1bd0 bec33d0c 00008c9c b6ea1bdc 60000010 00000003 00000000 00000000
(_omap_device_enable_hwmods+0x20/0x34)
(omap_device_enable+0x3c/0x50)
(_od_runtime_resume+0x10/0x1c)
(__rpm_callback+0x54/0x98)
(rpm_callback+0x64/0x7c)
(rpm_resume+0x434/0x554)
(__pm_runtime_resume+0x48/0x74)
(omap_i2c_xfer+0x28/0xe8)
(__i2c_transfer+0x3c/0x78)
(i2c_transfer+0x6c/0xc0)
(i2c_master_send+0x38/0x48)
(sha204p_send_command+0x60/0x9c)
(sha204c_send_and_receive+0x5c/0x1e0)
(sha204m_read+0x94/0xa0)
(otp_do_read+0x50/0xa4)
(vfs_ioctl+0x24/0x40)
(do_vfs_ioctl+0x1b0/0x1c0)
(sys_ioctl+0x38/0x54)
(ret_fast_syscall+0x0/0x30)
Code: e1a08002 ea000009 e598003c e592c05c (e7904003)

Cc: stable@vger.kernel.org
Signed-off-by: NJean-Philippe Fran=C3=A7ois <jp.francois@cynove.com>
Acked-by: NKevin Hilman <khilman@linaro.org>
[tony@atomide.com: updated description with oops]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Consistently check errors using the usual method used in the kernel
for much of its history.  For instance:

int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
{
	int div;
	div = gpmc_calc_divider(t->sync_clk);
	if (div < 0)
		return div;
static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
{
...
	return gpmc_cs_set_timings(cs, t);

.....
	ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
	if (IS_ERR_VALUE(ret))
		return ret;

So, gpmc_cs_set_timings() thinks any negative return value is an error,
but where we check that in higher levels, only a limited range are
errors...

There is only _one_ use of IS_ERR_VALUE() in arch/arm which is really
appropriate, and that is in arch/arm/include/asm/syscall.h:

static inline long syscall_get_error(struct task_struct *task,
				     struct pt_regs *regs)
{
	unsigned long error = regs->ARM_r0;
	return IS_ERR_VALUE(error) ? error : 0;
}

because this function really does have to differentiate between error
return values and addresses which look like negative numbers (eg, from
mmap()).

So, here's a patch to remove them from OMAP, except for the above.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

OMAP hwmod layer does the reset of the IPs in early code so that
we have SOC in sane state. To do the soft-reset, it needs to ioremap()
the IP address space to be able to write to sysconfig registers.

But there are few hwmod which doesn't have sysconfig registers and hence
no need to ioremap() them in early init code.

Prevent calling the _init_mpu_rt_base() conditional based on sysc
availability.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NBenoit Cousson <benoit.cousson@linaro.org>

Patch adds the code for extracting the module ocp address space
from device tree blob in case the hwmod address space look up fails.

The idea is to remove the address space data from hwmod and extract
it from DT blob.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NBenoit Cousson <benoit.cousson@linaro.org>

Use the generic idle loop and replace enable/disable_hlt with the
respective core functions.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: NCc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP
Link: http://lkml.kernel.org/r/20130321215233.826238797@linutronix.de

_HWMOD_WAKEUP_ENABLED is currently unused across the hwmod
framework. Just get rid of it, so we have one less flag to
worry about.
Tested-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Consistently check errors using the usual method used in the kernel
for much of its history.  For instance:

int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
{
	int div;
	div = gpmc_calc_divider(t->sync_clk);
	if (div < 0)
		return div;
static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
{
...
	return gpmc_cs_set_timings(cs, t);

.....
	ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
	if (IS_ERR_VALUE(ret))
		return ret;

So, gpmc_cs_set_timings() thinks any negative return value is an error,
but where we check that in higher levels, only a limited range are
errors...

There is only _one_ use of IS_ERR_VALUE() in arch/arm which is really
appropriate, and that is in arch/arm/include/asm/syscall.h:

static inline long syscall_get_error(struct task_struct *task,
				     struct pt_regs *regs)
{
	unsigned long error = regs->ARM_r0;
	return IS_ERR_VALUE(error) ? error : 0;
}

because this function really does have to differentiate between error
return values and addresses which look like negative numbers (eg, from
mmap()).

So, here's a patch to remove them from OMAP, except for the above.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

For some unknown reason, allowing hwmod to control MIDLEMODE causes
core_pwrdm to not hit idle states for musb in DM3730 at least.
I've verified that setting any MIDLEMODE value other than "force
standby" before enabling the device causes subsequent suspend
attempts to fail with core_pwrdm not entering idle states, even
if the driver is unloaded and "force standby" is restored before
suspend attempt. To recover from this, soft reset can be used, but
that's not suitable solution for suspend.

Keeping the register set at force standby (reset value) makes it work
and device still functions properly, as musb has driver-controlled
OTG_FORCESTDBY register that controls MSTANDBY signal.
Note that TI PSP kernels also have similar workarounds.

This patch also fixes HWMOD_SWSUP_MSTANDBY documentation to match the
actual flag name.
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

After setup/enable, some IP blocks need some additional setting to
indicate the PRCM that they are inactive until they are configured.
Some examples on OMAP4 include the AESS and FSUSB IP blocks.

To fix this cleanly, this patch adds another optional function
pointer, enable_preprogram, to the IP block's hwmod data.  The function
that is pointed to is called by the hwmod code immediately after the
IP block is reset.

This version of the patch includes a patch description fix from Felipe.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NSebastien Guiriec <s-guiriec@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Péter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Felipe Balbi <balbi@ti.com>

WKUP-M3 has a reset status bit (RM_WKUP_STST.WKUP_M3_LRST)
Update the hardreset API to ensure that the reset line properly
deasserted.
Signed-off-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Apparently, on some OMAPs, the MPU can't be allowed to enter WFI while
certain peripherals are active.  It's not clear why, and it's likely
that there is simply some other bug in the driver or integration code.
But since the likelihood that anyone will have the time to track these
problems down in the future seems quite small, we'll provide a
flag, HWMOD_BLOCK_WFI, to mark these issues in the hwmod data.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Apparently, on some OMAPs, the MPU can't be allowed to enter WFI while
certain peripherals are active.  It's not clear why, and it's likely
that there is simply some other bug in the driver or integration code.
But since the likelihood that anyone will have the time to track these
problems down in the future seems quite small, we'll provide a
flag, HWMOD_BLOCK_WFI, to mark these issues in the hwmod data.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

This way the initcalls don't run on other SoCs on multiplatform
kernels. Otherwise we'll get something like this when booting
on vexpress:

omap_hwmod: _ensure_mpu_hwmod_is_setup: MPU initiator hwmod mpu not yet registered
...
WARNING: at arch/arm/mach-omap2/pm.c:82 _init_omap_device+0x74/0x94()
_init_omap_device: could not find omap_hwmod for mpu
...
omap-dma-engine omap-dma-engine: OMAP DMA engine driver
...
Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add flags parameter for omap_hwmod_count_resources() so users can tell which
type of resources they are interested when counting them in hwmod database.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NBenoît Cousson <b-cousson@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

OMAP4 has module specific context lost registers which makes it now
possible to have module level context loss count, instead of relying
on the powerdomain level context count.

Add 2 private hwmod api's to update/clear the hwmod/module specific
context lost counters/register.

Update the module specific context_lost_counter and clear the hardware
bits just after enabling the module.

omap_hwmod_get_context_loss_count() now returns the hwmod context loss
count them on platforms where they exist (OMAP4), else fall back on
the pwrdm level counters for older platforms.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: added function kerneldoc, fixed structure kerneldoc,
 rearranged structure to avoid memory waste, marked fns as OMAP4-specific,
 prevent fn entry on non-OMAP4 chips, reduced indentation, merged update
 and clear, merged patches]
[t-kristo@ti.com: added support for arch specific hwmod ops, and changed
 the no context offset indicator to USHRT_MAX]
Signed-off-by: NTero Kristo <t-kristo@ti.com>
[paul@pwsan.com: use NO_CONTEXT_LOSS_BIT flag rather than USHRT_MAX;
 convert unsigned context lost counter to int to match the return type;
 get rid of hwmod_ops in favor of the existing soc_ops mechanism;
 move context loss low-level accesses to the PRM code]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Clean all #ifdef's added as part of fixing the clkdm
accesses from hwmod.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Without this kernel would crash, since clkdm inside omap_hwmod
is accessed in some of the init functions like, _init_main_clk.

So call init_clkdm before _init_main_clk().
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

hwmod uses deferencing the clk pointer to acccess the clkdm.
With COMMON clk hwoever this will need to be deferenced through
the clk_hw_omap pointer, so do the necessary changes.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

arch/arm/mach-omap2/prcm.c and arch/arm/plat-omap/include/plat/prcm.h
are now completely unused and can be removed.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

The hwmod code unconditionally calls _omap4_disable_module() on all
SoCs when a module doesn't enable correctly.  This "worked" due to the
weak function omap4_cminst_wait_module_idle() in
arch/arm/mach-omap2/prcm.c, which was a no-op.  But now those weak
functions are going away - they should not be used.  So this patch
will now call the SoC-specific disable_module code, assuming it
exists.

Needs to be done before the weak function is removed, otherwise AM33xx
will crash early in boot.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Consolidate all of the copies of MAX_MODULE_HARDRESET_WAIT and
MAX_MODULE_SOFTRESET_WAIT into one place, arch/arm/mach-omap2/prm.h.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Add HWMOD_EXT_OPT_MAIN_CLK flag to indicate that this IP block is
dependent on an off-chip functional clock that is not guaranteed to be
present during initialization.  IP blocks marked with this flag are
left in the INITIALIZED state during kernel init.

This is a workaround for a hardware problem.  It should be possible to
guarantee that at least one clock source will be present and active
for any IP block's main functional clock.  This ensures that the hwmod
code can enable and reset the IP block.  Resetting the IP block during
kernel init prevents any bogus bootloader, ROM code, or previous OS
configuration from affecting the kernel.  Hopefully a clock
multiplexer can be added on future SoCs.

N.B., at some point in the future, it should be possible to query the
clock framework for this type of information.  Then this flag should
no longer be needed.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>

When waking up from off-mode, some IP blocks are reset automatically by
hardware. For this reason, software must wait until the reset has
completed before attempting to access the IP block.

This patch fixes for example the bug introduced by commit
6c31b215 ("mmc: omap_hsmmc: remove access
to SYSCONFIG register"), in which the MMC IP block is reset during
off-mode entry, but the code expects the module to be already available
during the execution of context restore.

This version includes a fix from Kevin Hilman <khilman@ti.com> for
GPIO problems on the 37xx EVM - thanks Kevin.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Venkatraman S <svenkatr@ti.com>
Tested-by: NKevin Hilman <khilman@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
[paul@pwsan.com: moved softreset wait code into separate function; call
 from top of _enable_sysc() rather than the bottom; include fix from Kevin
 Hilman for GPIO sluggishness]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and
OMAP2xxx-specific macros into cm2xxx.[ch].  Move basic CM register
access functions into static inline functions in cm2xxx_3xxx.h,
leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c.

As part of this, split the CM and hwmod code that waits for devices to
become ready into SoC-specific functions.

This is in preparation for the upcoming move of this code to drivers/.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and
OMAP2xxx-specific macros into prm2xxx.h.  (prm2xxx.c will be created
by a subsequent patch when it's needed.)  Move basic PRM register
access functions into static inline functions in prm2xxx_3xxx.h, leaving
only OMAP2/3 hardreset functions in prm2xxx_3xxx.c.

Also clarify the initcall function naming to reinforce that this code
is specifically for the PRM IP block.

This is in preparation for the upcoming powerdomain series and the
upcoming move of this code to drivers/.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Remove arch/arm/plat-omap/include/plat/clock.h by merging it into
arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h.
The goal here is to facilitate ARM single image kernels by removing
includes via the "plat/" symlink.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
[tony@atomide.com: fixed to remove duplicate clock.h includes]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Let's make omap_hwmod local to mach-omap2 for
ARM common zImage support.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit eb05f691 ("ARM: OMAP: hwmod:
partially un-reset hwmods might not be properly enabled") added code
to skip the IP block disable sequence if all of the block's hardreset
lines weren't asserted.  But this did not handle the case when no
hardreset lines were associated with a module, which is the general
case.  In that situation, the IP block disable would be skipped.  This
is likely to cause PM regressions.

So, modify _omap4_disable_module() and _am33xx_disable_module() to
only bail out early if there are any hardreset lines asserted.  And
move the AM33xx test above the actual module disable code to ensure
that the behavior is consistent.
Reported-by: NArchit Taneja <a0393947@ti.com>
Tested-by: Archit Taneja <a0393947@ti.com> # DSS
Cc: Omar Ramirez Luna <omar.luna@linaro.org>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com> # AM335x
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The idle status of the IP blocks and clocks inside the EMU clockdomain
isn't taken into account by the PRCM hardware when deciding whether
the clockdomain is idle.  Add a workaround flag in the clockdomain
code, CLKDM_MISSING_IDLE_REPORTING, to deal with this problem, and add
the code necessary to support it.

If CLKDM_MISSING_IDLE_REPORTING is set on a clockdomain, the
clockdomain will be forced active whenever an IP block inside that
clockdomain is in use, even if the clockdomain supports
hardware-supervised idle.  When the kernel indicates that the last
active IP block inside the clockdomain is no longer used, the
clockdomain will be forced idle, or, if that mode is not supported in
the hardware, it will be placed into hardware-supervised idle.

This patch is an equal collaboration with Jon Hunter
<jon-hunter@ti.com>.  Ming Lei <ming.lei@canonical.com>, Will Deacon
<will.deacon@arm.com>, Madhav Vij <mvij@ti.com>, Kevin Hilman
<khilman@ti.com>, Benoît Cousson <b-cousson@ti.com>, and Santosh
Shilimkar <santosh.shilimkar@ti.com> all made essential contributions
to the understanding of EMU clockdomain power management on OMAP.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Jon Hunter <jon-hunter@ti.com>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Madhav Vij <mvij@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: NJon Hunter <jon-hunter@ti.com>

For a reset sequence to complete cleanly, a module needs its
associated clocks to be enabled, otherwise the timeout check
in prcm code can print a false failure (failed to hardreset)
that occurs because the clocks aren't powered ON and the status
bit checked can't transition without them.
Signed-off-by: NOmar Ramirez Luna <omar.luna@linaro.org>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Some IP blocks might not be using/controlling more than one
reset line, this check loosens the restriction to fully use
hwmod framework for those drivers.

E.g.: ipu has reset lines: mmu_cache, cpu0 and cpu1.
- As of now cpu1 is not used and hence (with previous check) the
  IP block isn't fully enabled by hwmod code.
- Usually ipu and dsp processors configure their mmu module first
  and then enable the processors, this involves:
    * Deasserting mmu reset line, and enabling the module.
    * Deasserting cpu0 reset line, and enabling the processor.
  The ones portrayed in this example are controlled through
  rproc_fw_boot in drivers/remoteproc/remoteproc_core.c

While at it, prevent _omap4_module_disable if all the hardreset
lines on an IP block are not under reset.

This will allow the driver to:
  a. Deassert the reset line.
  b. Enable the hwmod through runtime PM default callbacks.
  c. Do its usecase.
  d. Disable hwmod through runtime PM.
  e. Assert the reset line.
Signed-off-by: NOmar Ramirez Luna <omar.luna@linaro.org>
[paul@pwsan.com: updated to apply]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>