- 21 3月, 2011 1 次提交
-
-
This patch moves the platform data definition from arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so it can be accessed from x86 the same way as on ARM. This change should make no functional change to the PXA code. The move is verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig pxa910_defconfig Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 15 3月, 2011 2 次提交
-
-
由 Guenter Roeck 提交于
This driver adds support for hardware monitoring features of various PMBus devices. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
-
由 stigge@antcom.de 提交于
2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller Signed-off-by: NRoland Stigge <stigge@antcom.de> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 03 3月, 2011 1 次提交
-
-
由 Ilkka Koskinen 提交于
audio_mclk can be queried from mfd driver. Therefore, it is not needed in twl4030_codec_audio_data or in twl4030_codec_vibra_data anymore. Signed-off-by: NIlkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 24 2月, 2011 1 次提交
-
-
由 Heungjun Kim 提交于
This adds support for system-level suspend/resume to the driver. Signed-off-by: NHeungjun Kim <riverful.kim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 2月, 2011 4 次提交
-
-
由 Iiro Valkonen 提交于
Different board have different requirements/setups so let's be more flexible. Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Iiro Valkonen 提交于
As there is no common configuration settings that would work in every situation, remove the fixed config data from driver code and add config data to platform data. Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Iiro Valkonen 提交于
Change prefixes from qt602240 to mxt to reflect that the driver supports whole line of mXT touchscreens. Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Since the driver will be supporting whole range of Atmels mXT touchscreen controllers we better rename it to atmel_mxt_ts. Acked-by: NIiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 18 2月, 2011 1 次提交
-
-
由 Hema HK 提交于
Declare the .phy_suspend function pointer to twl4030_usb_data structure. OMAP internal phy suspend function will be hooked though this function pointer to use in the transceiver driver. Signed-off-by: NHema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 10 1月, 2011 1 次提交
-
-
由 Roland Stigge 提交于
Driver for Dallas Semiconductor DS620 temperature sensor and thermostat Signed-off-by: NRoland Stigge <stigge@antcom.de> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 10 12月, 2010 1 次提交
-
-
由 Hema HK 提交于
Registering the twl6030-usb transceiver device as a child to twl6030 core. Removed the NOP transceiver init call from board file. Populated twl4030_usb_data platform data structure with the function pointers for OMAP4430 internal PHY operation to be used by twl630-usb driver. Signed-off-by: NHema HK <hemahk@ti.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 04 11月, 2010 1 次提交
-
-
由 Michael Hennerich 提交于
Unify adp5588-gpio and adp5588-keys common header defines (as per Andrew Morton request). For consistency, move remaining defines and prefix accordingly. No functional changes. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 29 10月, 2010 2 次提交
-
-
由 kishore kadiyala 提交于
Adding card detect callback function and card detect configuration function for MMC1 Controller on OMAP4. Card detect configuration function does initial configuration of the MMC Control & PullUp-PullDown registers of Phoenix. For MMC1 Controller, card detect interrupt source is twl6030 which is non-gpio. The card detect call back function provides card present/absent status by reading MMC Control register present on twl6030. Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect, the suspend/resume initialization which was done in omap_hsmmc_gpio_init previously is moved to the probe thus making it generic for both OMAP3 & OMAP4. Cc: Tony Lindgren <tony@atomide.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: NKishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Felipe Balbi 提交于
Some modules already need to talk to at least PROTECT_KEY register, while at that, add defines to the entire register space. Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 28 10月, 2010 3 次提交
-
-
由 Michael Hennerich 提交于
Some ADP5588 functions take a pointer to an i2c_client, but if the i2c header doesn't happen to be included first, we hit the standard "struct declared inside parameter list" warnings from gcc. So add a simple forward decl of the i2c_client struct. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Hennerich 提交于
Common code interprets this as a signed value (a negative value is used to request dynamic ID allocation), so make sure the platform data has proper types to support that. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Hennerich 提交于
Implement irq_chip functionality on ADP5588/5587 GPIO expanders. Only level sensitive interrupts are supported. Interrupts provided by this irq_chip must be requested using request_threaded_irq(). Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 10月, 2010 2 次提交
-
-
由 Samu Onkalo 提交于
This is a driver for Avago APDS990X combined ALS and proximity sensor. Interface is sysfs based. The driver uses interrupts to provide new data. The driver supports pm_runtime and regulator frameworks. See Documentation/misc-devices/apds990x.txt for details Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Samu Onkalo 提交于
This is a driver for ROHM BH1770GLC and OSRAM SFH7770 combined ALS and proximity sensor. Interface is sysfs based. The driver uses interrupts to provide new data. The driver supports pm_runtime and regulator frameworks. See Documentation/misc-devices/bh1770glc.txt for details Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 9月, 2010 1 次提交
-
-
由 Gregory Bean 提交于
Replace the arbitrary software-reset call from the device-probe method, because: - It is defective. To work correctly, it should be two byte writes, not a single word write. As it stands, it does nothing. - Some devices with sx150x expanders installed have their NRESET pins ganged on the same line, so resetting one causes the others to reset - not a nice thing to do arbitrarily! - The probe, usually taking place at boot, implies a recent hard-reset, so a software reset at this point is just a waste of energy anyway. Therefore, make it optional, defaulting to off, as this will match the common case of probing at powerup and also matches the current broken no-op behavior. Signed-off-by: NGregory Bean <gbean@codeaurora.org> Reviewed-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 8月, 2010 1 次提交
-
-
由 Ira W. Snyder 提交于
Add support for exposing all GPIO pins as analog voltages. Though this is not an ideal use of the chip, some hardware engineers may decide that the LTC4245 meets their design requirements when studying the datasheet. The GPIO pins are sampled in round-robin fashion, meaning that a slow reader will see stale data. A userspace application can detect this, because it will get -EAGAIN when reading from a sysfs file which contains stale data. Users can choose to use this feature on a per-chip basis by using either platform data or the OF device tree (where applicable). Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 12 8月, 2010 2 次提交
-
-
由 Liam Girdwood 提交于
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: NTimur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: NTimur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Michael Lawnick 提交于
I2C driver for PCA954x I2C multiplexer series. Signed-off-by: NMichael Lawnick <ml.lawnick@gmx.de> Acked-by: NRodolfo Giometti <giometti@linux.it> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 11 8月, 2010 1 次提交
-
-
由 Gregory Bean 提交于
Add support for Semtech SX150-series I2C GPIO expanders. Compatible models include: 8 bits: sx1508q 16 bits: sx1509q Signed-off-by: NGregory Bean <gbean@codeaurora.org> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 7月, 2010 1 次提交
-
-
由 Xiaolong Chen 提交于
This patch allows exporting GPIO pins not used by the keypad itself to be accessible from elsewhere. Signed-off-by: NXiaolong Chen <xiao-long.chen@motorola.com> Signed-off-by: NYuanbo Ye <yuan-bo.ye@motorola.com> Signed-off-by: NTao Hu <taohu@motorola.com> Acked-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 15 7月, 2010 1 次提交
-
-
由 Joonyoung Shim 提交于
The chip's full name is AT42QT602240 or ATMXT224. This is a capacitive touchscreen supporting 10-contact multitouch and using I2C interface. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 04 7月, 2010 1 次提交
-
-
由 Joonyoung Shim 提交于
This adds support for MELPAS MCS5000/MSC5080 touch key controllers. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 25 6月, 2010 1 次提交
-
-
由 Xiaolong CHEN 提交于
A column or row configured as a GPI can be programmed to be part of the key event table and therefore also capable of generating a key event interrupt. A key event interrupt caused by a GPI follows the same process flow as a key event interrupt caused by a key press. GPIs configured as part of the key event table allow single key switches and other GPI interrupts to be monitored. As part of the event table, GPIs are represented by the decimal value 97 (0x61 or 1100001) through the decimal value 114 (0x72 or 1110010). See table below for GPI event number assignments for rows and columns. GPI Event Number Assignments for Rows Row0 Row1 Row2 Row3 Row4 Row5 Row6 Row7 97 98 99 100 101 102 103 104 GPI Event Number Assignments for Cols Col0 Col1 Col2 Col3 Col4 Col5 Col6 Col7 Col8 Col9 105 106 107 108 109 110 111 112 113 114 Signed-off-by: NXiaolong Chen <xiao-long.chen@motorola.com> Signed-off-by: NYuanbo Ye <yuan-bo.ye@motorola.com> Signed-off-by: NTao Hu <taohu@motorola.com> Acked-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 28 5月, 2010 2 次提交
-
-
由 Uwe Kleine-König 提交于
gpiolib doesn't need to modify the names and I assume most initializers use string constants that shouldn't be modified anyhow. [akpm@linux-foundation.org: fix drivers/gpio/cs5535-gpio.c] Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Kevin Wells <kevin.wells@nxp.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marc Zyngier 提交于
Most of the GPIO expanders supported by the max732x driver have interrupt generation capability by reporting changes on input pins through an INT# pin. This patch implements the irq_chip functionnality (edge detection only). Signed-off-by: NMarc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jebediah Huang <jebediah.huang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 5月, 2010 2 次提交
-
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Michael Hennerich 提交于
The ADP8860 combines a programmable backlight LED charge pump driver with automatic phototransistor control. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
- 24 3月, 2010 1 次提交
-
-
由 Thomas Weber 提交于
Fix typo in comments: - contollable => controllable - uniqe => unique Replace tab with whitespace in defines. Signed-off-by: NThomas Weber <weber@corscience.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 3月, 2010 1 次提交
-
-
由 Olaya, Margarita 提交于
Correction for chips: twl6030 is Phoenix Power chip twl6040 is Phoenix Audio chip Signed-off-by: NMargarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 3月, 2010 4 次提交
-
-
由 Mike Turquette 提交于
New function twl4030_remove_script(u8 flags) takes a script type as defined in twl.h and prevents any script already loaded in that position from running. This is accomplished by programming SEQ_ADD_* to 0x3f, the END_OF_SCRIPT value, where SEQ_ADD_* is determined by flags. (Future) users of this function include OMAP board files for machines facing a race condition between sleep and warm reset. Signed-off-by: NMike Turquette <mturquette@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Balaji T K 提交于
Add base address for generic slave ID0, ID1, ID2 and introduced one more entry to align RTC module number between twl4030 and twl6030 Signed-off-by: NBalaji T K <balajitk@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Moiz Sonasath 提交于
This patch disables TWL4030/5030 I2C1 adn I2C4(SR) internal pull-up, to use only the external HW resistor >=470 Ohm for the assured functionality in HS mode. While testing the I2C in High Speed mode, it was discovered that without a proper pull-up resistor, there is data corruption during multi-byte transfer. RTC(time_set) test case was used for testing. From the analysis done, it was concluded that ideally we need a pull-up of 1.6k Ohm(recomended) or atleast 470 Ohm or greater for assured performance in HS mode. Signed-off-by: NMoiz Sonasath <m-sonasath@ti.com> Signed-off-by: NAllen Pais <allen.pais@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Christoph Egger 提交于
The TWL4030_BCI_BATTERY config option originates from a patch to the omap git tree. However inclusion in linux was seemingly rejected and the functionality nears inclusion under a different name so this removes the bits of the old version that made it into the mainline kernel again. Signed-off-by: NChristoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 07 3月, 2010 1 次提交
-
-
由 Marc Zyngier 提交于
Most of the GPIO expanders controlled by the pca953x driver are able to report changes on the input pins through an *INT pin. This patch implements the irq_chip functionality (edge detection only). The driver has been tested on an Arcom Zeus. [akpm@linux-foundation.org: the compiler does inlining for us nowadays] Signed-off-by: NMarc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Nate Case <ncase@xes-inc.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-