Since commit 84af7a61 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

ZBOOT_ROM_TEXT and ZBOOT_ROM_BSS are defined as 'hex' but had a default
of "0". Kconfig will helpfully expand a text entry of 0 to 0x0 but
because this is not the same as the default value it was treated as
being explicitly set when running 'make savedefconfig' so most arm
defconfigs have CONFIG_ZBOOT_ROM_TEXT=0x0 and CONFIG_ZBOOT_ROM_BSS=0x0.

Change the default to 0x0 which will mean next time the defconfigs are
re-generated the spurious config entries will be removed.
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

ARMv7 chips with LPAE can often benefit from SPARSEMEM, as portions of
system memory can be located deep in the 36-bit address space.  Allow
FLATMEM or SPARSEMEM to be selectable at compile time; FLATMEM remains
the default.

This is based on Kevin's "[PATCH 3/3] ARM: Allow either FLATMEM or
SPARSEMEM on the multi-v7 build" from [1] and shamelessly rips off his
commit message text above.  As Arnd pointed out at [2] there doesn't
seem to be any reason to tie this specifically to ARMv7, so this has
been changed to apply to all multiplatform kernels.

The addition of this option does not change the defaults and a build with
any defconfig will behave the same way as previously.

The only effect this change has is to enable user to change "Memory model"
selection in interactive kernel configuration (menuconfig, xconfig etc).

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/286837.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-October/298950.html

[ rppt: added ARCH_SELECT_MEMORY_MODEL and updated the changelog ]

Cc: Kevin Cernekee <cernekee@gmail.com>
Tested-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NGregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NMike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

If ARCH_SPARSEMEM_ENABLE=y and ARCH_{FLATMEM,DISCONTIGMEM}_ENABLE=n,
then the logic in mm/Kconfig already makes CONFIG_SPARSEMEM the only
choice.  This is true for all of the existing ARM users of
ARCH_SPARSEMEM_ENABLE.

Forcing ARCH_SPARSEMEM_DEFAULT=y if ARCH_SPARSEMEM_ENABLE=y prevents
us from ever defaulting to FLATMEM, so we should remove this setting.

Link: https://lkml.org/lkml/2015/6/4/757Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Tested-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NMike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

The commit 3e347261 ("[PATCH] sparsemem extreme implementation")
made SPARSMEM_EXTREME the default option for configurations that enable
SPARSEMEM.

For ARM systems with handful of memory banks SPARSEMEM_EXTREME is an
overkill.

Ensure that SPARSMEM_STATIC is enabled in the configurations that use
SPARSEMEM.

Fixes: 3e347261 ("[PATCH] sparsemem extreme implementation")
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NMike Rapoport <rppt@linux.ibm.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

The ARM Architected timer is available on ARMv7 SoCs only.
As both ARCH_MULTIPLATFORM and ARM_SINGLE_ARMV7M select
GENERIC_CLOCKEVENTS, there is no need for HAVE_ARM_ARCH_TIMER to select
GENERIC_CLOCKEVENTS.

Link: https://lore.kernel.org/r/20200505150722.1575-2-geert+renesas@glider.beSigned-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Given the legacy bpf_probe_read{,str}() BPF helpers are broken on archs
with overlapping address ranges, we should really take the next step to
disable them from BPF use there.

To generally fix the situation, we've recently added new helper variants
bpf_probe_read_{user,kernel}() and bpf_probe_read_{user,kernel}_str().
For details on them, see 6ae08ae3 ("bpf: Add probe_read_{user, kernel}
and probe_read_{user,kernel}_str helpers").

Given bpf_probe_read{,str}() have been around for ~5 years by now, there
are plenty of users at least on x86 still relying on them today, so we
cannot remove them entirely w/o breaking the BPF tracing ecosystem.

However, their use should be restricted to archs with non-overlapping
address ranges where they are working in their current form. Therefore,
move this behind a CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE and
have x86, arm64, arm select it (other archs supporting it can follow-up
on it as well).

For the remaining archs, they can workaround easily by relying on the
feature probe from bpftool which spills out defines that can be used out
of BPF C code to implement the drop-in replacement for old/new kernels
via: bpftool feature probe macro
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20200515101118.6508-2-daniel@iogearbox.net

Enable build testing and configuration control of the common clk
framework so that more code coverage and testing can be done on the
common clk framework across various architectures. This also nicely
removes the requirement that architectures must select the framework
when they don't use it in architecture code.

There's one snag with doing this, and that's making sure that randconfig
builds don't select this option when some architecture or platform
implements 'struct clk' outside of the common clk framework. Introduce a
new config option 'HAVE_LEGACY_CLK' to indicate those platforms that
haven't migrated to the common clk framework and therefore shouldn't be
allowed to select this new config option. Also add a note that we hope
one day to remove this config entirely.

Based on a patch by Mark Brown <broonie@kernel.org>.

Cc: Mark Brown <broonie@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-c6x-dev@linux-c6x.org>
Cc: <linux-m68k@lists.linux-m68k.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sh@vger.kernel.org>
Link: https://lore.kernel.org/r/1470915049-15249-1-git-send-email-broonie@kernel.orgSigned-off-by: NStephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200409064416.83340-8-sboyd@kernel.orgReviewed-by: NMark Brown <broonie@kernel.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>

These platforms select COMMON_CLK indirectly through use of the
ARCH_MULTIPLATFORM config option that they depend on implicitly via some
V7/V6/V5 multi platform config option. The COMMON_CLK config option
already selects CLKDEV_LOOKUP so it's redundant to have this selected
again.

Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20200409064416.83340-3-sboyd@kernel.org

Most of the arm-stub code is written in an architecture independent manner.
As a result, RISC-V can reuse most of the arm-stub code.

Rename the arm-stub.c to efi-stub.c so that ARM, ARM64 and RISC-V can use it.
This patch doesn't introduce any functional changes.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Reviewed-by: NPalmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20200415195422.19866-2-atish.patra@wdc.comSigned-off-by: NArd Biesheuvel <ardb@kernel.org>

Now that there's a DT based sched_clock driver in
drivers/clocksource/timer-versatile.c and all the Arm reference
platforms are DT only, the non-DT versatile sched_clock code can be
removed.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200409221952.31287-1-robh@kernel.orgSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>

Introduce ARCH_REALTEK Kconfig option also for 32-bit Arm.

Override the text offset to cope with boot ROM occupying first 0xa800
bytes and further reservations up to 0xf4000 (compare Device Tree).

Add a custom machine_desc to enforce memory carveout for I/O registers.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

As we're about to drop KVM/arm on the floor, carefully unplug
it from the build system.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will@kernel.org>
Acked-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>

Convert ARM/ARM64 to the generic VDSO clock mode storage. This needs to
happen in one go as they share the clocksource driver.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lkml.kernel.org/r/20200207124403.363235229@linutronix.de

Arm entry code calls context tracking from fast path. TIF_NOHZ is unused
and can be safely removed.
Signed-off-by: NFrederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>

A few archs (x86, arm, arm64) don't rely anymore on TIF_NOHZ to call
into context tracking on user entry/exit but instead use static keys
(or not) to optimize those calls. Ideally every arch should migrate to
that behaviour in the long run.

Settle a config option to let those archs remove their TIF_NOHZ
definitions.
Signed-off-by: NFrederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David S. Miller <davem@davemloft.net>

Towards a more consistent naming scheme.

[akpm@linux-foundation.org: fix sparc64 Kconfig]
Link: http://lkml.kernel.org/r/20200116064531.483522-7-aneesh.kumar@linux.ibm.comSigned-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kmemleak relies on specific symbols to register the read only data
during init (e.g. __start_ro_after_init).
Trying to build an XIP kernel on arm results in the linking error
reported below because when this option is selected read only data
after init are not allowed since .data is read only (.rodata).

  arm-linux-gnueabihf-ld: mm/kmemleak.o: in function `kmemleak_init':
  kmemleak.c:(.init.text+0x148): undefined reference to `__end_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x14c):
     undefined reference to `__end_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x150):
     undefined reference to `__start_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x156):
     undefined reference to `__start_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x162):
     undefined reference to `__start_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x16a):
     undefined reference to `__start_ro_after_init'
  linux/Makefile:1078: recipe for target 'vmlinux' failed

Fix the issue enabling kmemleak only on non XIP kernels.
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

To perform the reserve_crashkernel() operation kexec uses SECTION_SIZE to
find a memblock in a range.
SECTION_SIZE is not defined for nommu systems. Trying to compile kexec in
these conditions results in a build error:

  linux/arch/arm/kernel/setup.c: In function ‘reserve_crashkernel’:
  linux/arch/arm/kernel/setup.c:1016:25: error: ‘SECTION_SIZE’ undeclared
     (first use in this function); did you mean ‘SECTIONS_WIDTH’?
             crash_size, SECTION_SIZE);
                         ^~~~~~~~~~~~
                         SECTIONS_WIDTH
  linux/arch/arm/kernel/setup.c:1016:25: note: each undeclared identifier
     is reported only once for each function it appears in
  linux/scripts/Makefile.build:265: recipe for target 'arch/arm/kernel/setup.o'
     failed

Make KEXEC depend on MMU to fix the compilation issue.
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

This is required for clone3 which passes the TLS value through a
struct rather than a register.
Signed-off-by: NAmanieu d'Antras <amanieu@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # 5.3.x
Link: https://lore.kernel.org/r/20200102172413.654385-4-amanieu@gmail.comSigned-off-by: NChristian Brauner <christian.brauner@ubuntu.com>

Use a more generic name for additional table sorting usecases,
such as the upcoming ORC table sorting feature. This tool is
not tied to exception table sorting anymore.

No functional changes intended.

[ mingo: Rewrote the changelog. ]
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204004633.88660-6-shile.zhang@linux.alibaba.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The generic implementation of refcount_t should be good enough for
everybody, so remove ARCH_HAS_REFCOUNT and REFCOUNT_FULL entirely,
leaving the generic implementation enabled unconditionally.
Signed-off-by: NWill Deacon <will@kernel.org>
Reviewed-by: NArd Biesheuvel <ardb@kernel.org>
Acked-by: NKees Cook <keescook@chromium.org>
Tested-by: NHanjun Guo <guohanjun@huawei.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191121115902.2551-9-will@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

For dma-direct we know that the DMA address is an encoding of the
physical address that we can trivially decode.  Use that fact to
provide implementations that do not need the arch_dma_coherent_to_pfn
architecture hook.  Note that we still can only support mmap of
non-coherent memory only if the architecture provides a way to set an
uncached bit in the page tables.  This must be true for architectures
that use the generic remap helpers, but other architectures can also
manually select it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMax Filippov <jcmvbkbc@gmail.com>

Increase the max number of GPIOs from default 512 to 1024 for ASPEED
platforms, because Facebook Yamp (AST2500) BMC platform has total 594
GPIO pins (232 provided by ASPEED SoC, and 362 by I/O Expanders).

Link: https://lore.kernel.org/r/20191031014040.12898-1-rentao.bupt@gmail.comSigned-off-by: NTao Ren <rentao.bupt@gmail.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Caching dates is never a good idea ;-)

Fixes: 7253b85c ("ARM: 7541/1: Add ARM ERRATA 775420 workaround")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

arm uses a top-down mmap layout by default that exactly fits the generic
functions, so get rid of arch specific code and use the generic version by
selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT.

As ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT selects ARCH_HAS_ELF_RANDOMIZE,
use the generic version of arch_randomize_brk since it also fits.  Note
that this commit also removes the possibility for arm to have elf
randomization and no MMU: without MMU, the security added by randomization
is worth nothing.

Note that it is safe to remove STACK_RND_MASK since it matches the default
value.

Link: http://lkml.kernel.org/r/20190730055113.23635-9-alex@ghiti.frSigned-off-by: NAlexandre Ghiti <alex@ghiti.fr>
Acked-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NLuis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, multi_v7_defconfig + CONFIG_FUNCTION_TRACER fails to build
with clang:

arm-linux-gnueabi-ld: kernel/softirq.o: in function `_local_bh_enable':
softirq.c:(.text+0x504): undefined reference to `mcount'
arm-linux-gnueabi-ld: kernel/softirq.o: in function `__local_bh_enable_ip':
softirq.c:(.text+0x58c): undefined reference to `mcount'
arm-linux-gnueabi-ld: kernel/softirq.o: in function `do_softirq':
softirq.c:(.text+0x6c8): undefined reference to `mcount'
arm-linux-gnueabi-ld: kernel/softirq.o: in function `irq_enter':
softirq.c:(.text+0x75c): undefined reference to `mcount'
arm-linux-gnueabi-ld: kernel/softirq.o: in function `irq_exit':
softirq.c:(.text+0x840): undefined reference to `mcount'
arm-linux-gnueabi-ld: kernel/softirq.o:softirq.c:(.text+0xa50): more undefined references to `mcount' follow

clang can emit a working mcount symbol, __gnu_mcount_nc, when
'-meabi gnu' is passed to it. Until r369147 in LLVM, this was
broken and caused the kernel not to boot with '-pg' because the
calling convention was not correct. Always build with '-meabi gnu'
when using clang but ensure that '-pg' (which is added with
CONFIG_FUNCTION_TRACER and its prereq CONFIG_HAVE_FUNCTION_TRACER)
cannot be added with it unless this is fixed (which means using
clang 10.0.0 and newer).

Link: https://github.com/ClangBuiltLinux/linux/issues/35
Link: https://bugs.llvm.org/show_bug.cgi?id=33845
Link: https://github.com/llvm/llvm-project/commit/16fa8b09702378bacfa3d07081afe6b353b99e60Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Add modifications necessary to make davinci part of the ARM v5
multiplatform build.

Move the arch-specific configuration out of arch/arm/Kconfig and
into mach-davinci/Kconfig. Remove the sub-menu for DaVinci
implementations (they'll be visible directly under the system type.
Select all necessary options not already selected by ARCH_MULTI_V5.
Update davinci_all_defconfig. Explicitly include the mach-specific
headers in mach-davinci/Makefile.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

arch_dma_mmap_pgprot is used for two things:

 1) to override the "normal" uncached page attributes for mapping
    memory coherent to devices that can't snoop the CPU caches
 2) to provide the special DMA_ATTR_WRITE_COMBINE semantics on older
    arm systems and some mips platforms

Replace one with the pgprot_dmacoherent macro that is already provided
by arm and much simpler to use, and lift the DMA_ATTR_WRITE_COMBINE
handling to common code with an explicit arch opt-in.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	# m68k
Acked-by: Paul Burton <paul.burton@mips.com>		# mips

Clang produces references to __aeabi_uidivmod and __aeabi_idivmod for
arm-linux-gnueabi and arm-linux-gnueabihf targets incorrectly when AEABI
is not selected (such as when OABI_COMPAT is selected).

While this means that OABI userspaces wont be able to upgraded to
kernels built with Clang, it means that boards that don't enable AEABI
like s3c2410_defconfig will stop failing to link in KernelCI when built
with Clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/482
Link: https://groups.google.com/forum/#!msg/clang-built-linux/yydsAAux5hk/GxjqJSW-AQAJSuggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

We need to provide the arch hooks for non-coherent dma-direct
and swiotlb for all swiotlb builds, not just when LPAS is enabled.
Without that the Xen build that selects SWIOTLB indirectly through
SWIOTLB_XEN fails to build.

Fixes: ad3c7b18 ("arm: use swiotlb for bounce buffering on LPAE configs")
Reported-by: NStefan Wahren <wahrenst@gmx.net>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NStefan Wahren <wahrenst@gmx.net>

All preparation work is done, so the platform can finally
be moved into ARCH_MULTIPLATFORM. This requires a small
change to the defconfig file to enable the platform.

Link: https://lore.kernel.org/r/20190809144043.476786-14-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>

There are three families of IOP machines we support in Linux: iop32x
(which includes EP80219), iop33x and iop13xx (aka IOP34x aka WP8134x).

All products we support in the kernel are based on the first of these,
iop32x, the other families only ever supported the Intel reference
boards but no actual machine anyone could ever buy.

While one could clearly make them all three work in a single kernel
with some work, this takes the easy way out, removing the later two
platforms entirely, under the assumption that there are no remaining
users.

Earlier versions of OpenWRT and Debian both had support for iop32x
but not the others, and they both dropped iop32x as well in their 2015
releases.

Link: https://lore.kernel.org/r/20190809163334.489360-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C parts
Acked-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This removes the old Winbond w90x900 platform, also known
as Nuvoton NUC900. Wan Zongshun originally contributed
the port and maintained it since then.

From all I can tell, this platform is no longer being used
with modern kernels, based on various indications:

- The supported chips (nuc910/950/960) are no longer marketed
  by the manufacturer

- Newer chips from the same family (nuc97x, nuc980, n329x)
  that are still marketed have Linux BSPs but those were never
  submitted for upstream inclusion.

- The last patch from the platform maintainer was in 2011.

- All patches to w90x900 platform specific files afterwards
  are cleanups that were apparently done without access to
  test hardware.

- Both the website and the email address listed in the
  MAINTAINERS have become unreachable.

Link: https://lore.kernel.org/r/20190809202749.742267-17-arnd@arndb.de
Cc: "Wanzongshun (Vincent)" <wanzongshun@huawei.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

ks8695 is an older SoC originally made by Kendin, which was later acquired
by Micrel, and subsequently by Microchip.

The platform port was originally contributed by Andrew Victor and Ben
Dooks, and later maintained by Greg Ungerer.

When I recently submitted cleanups, but Greg noted that the platform no
longer boots and nobody is using it any more, we decided to remove it.

Link: https://lore.kernel.org/r/20190809202749.742267-2-arnd@arndb.de
Cc: Andrew Victor <linux@maxim.org.za>
Acked-by: NBen Dooks <ben-linux@fluff.org>
Link: https://wikidevi.com/wiki/Micrel
Link: https://lore.kernel.org/linux-arm-kernel/2bc41895-d4f9-896c-0726-0b2862fcbf25@kernel.org/Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NGreg Ungerer <gerg@kernel.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Switch all davinci boards supporting device tree to using the new
clocksource driver: remove the previous OF_TIMER_DECLARE() from
mach-davinci and select davinci-timer for ARCH_DAVINCI.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: NDavid Lechner <david@lechnology.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

There are lots of documents that belong to the admin-guide but
are on random places (most under Documentation root dir).

Move them to the admin guide.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

The Kdump documentation describes procedures with admins use
in order to solve issues on their systems.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Converts ARM the text files to ReST, preparing them to be an
architecture book.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by Corentin Labbe <clabbe.montjoie@gmail.com> # For sun4i-ss

We only support the generic GUP now, so rename the config option to
be more clear, and always use the mm/Kconfig definition of the
symbol and select it from the arch Kconfigs.

Link: http://lkml.kernel.org/r/20190625143715.1689-11-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKhalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: James Hogan <jhogan@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>