The device may take up to 100ms to become responsive during probe, so
prefer asynchronous probing to avoid delaying the rest of the system.
Suggested-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJohn Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211007111217.1935858-1-john@metanate.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

I have a ST1633 touch controller which fails to probe due to a timeout
waiting for the controller to become ready.  Increasing the minimum
delay to 100ms ensures that the probe sequence completes successfully.

The ST1633 datasheet says nothing about the maximum delay here and the
ST1232 I2C protocol document says "wait until" with no notion of a
timeout.

Since this only runs once during probe, being generous with the timout
seems reasonable and most likely the device will become ready
eventually.

(It may be worth noting that I saw this issue with a PREEMPT_RT patched
kernel which probably has tighter wakeups from usleep_range() than other
preemption models.)

Fixes: f605be6a ("Input: st1232 - wait until device is ready before reading resolution")
Signed-off-by: NJohn Keeping <john@metanate.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 04647773 ("dt-bindings: input: Convert ChipOne ICN8318
binding to a schema") converts chipone_icn8318.txt to chipone,icn8318.yaml,
but missed to adjust its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
a broken reference.

Repair this file reference in CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211005075451.29691-12-lukas.bulwahn@gmail.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Overlapping input and output arguments to snprintf() are
undefined behavior in C99:

drivers/input/joystick/analog.c: In function 'analog_name':
drivers/input/joystick/analog.c:428:3: error: 'snprintf' argument 4 overlaps destination object 'analog' [-Werror=restrict]
  428 |   snprintf(analog->name, sizeof(analog->name), "%s %d-hat",
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  429 |     analog->name, hweight16(analog->mask & ANALOG_HATS_ALL));
      |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/input/joystick/analog.c:420:40: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
  420 | static void analog_name(struct analog *analog)
      |                         ~~~~~~~~~~~~~~~^~~~~~

Change this function to use the simpler seq_buf interface instead.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210927101416.1569609-1-arnd@kernel.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.

Fixes: 96c8395e ("spi: Revert modalias changes")
Signed-off-by: NMark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210927134104.38648-1-broonie@kernel.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The helper function devm_add_action_or_reset() will internally
call devm_add_action(), and if devm_add_action() fails then it will
execute the action mentioned and return the error code. So
use devm_add_action_or_reset() instead of devm_add_action()
to simplify the error handling, reduce the code.
Signed-off-by: NCai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210922125954.533-1-caihuoqing@baidu.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The helper function devm_add_action_or_reset() will internally
call devm_add_action(), and if devm_add_action() fails then it will
execute the action mentioned and return the error code. So
use devm_add_action_or_reset() instead of devm_add_action()
to simplify the error handling, reduce the code.
Signed-off-by: NCai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210922125212.95-3-caihuoqing@baidu.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The helper function devm_add_action_or_reset() will internally
call devm_add_action(), and if devm_add_action() fails then it will
execute the action mentioned and return the error code. So
use devm_add_action_or_reset() instead of devm_add_action()
to simplify the error handling, reduce the code.
Signed-off-by: NCai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210922125212.95-2-caihuoqing@baidu.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Some Goodix touchscreen controllers, such as for example the GT912,
don't have flash-storage for their firmware.

These models require the OS to load the firmware at runtime, as well as
some other special handling. Add support for this to the goodix driver.

This patch was developed and tested on a Glavey TM800A550L tablet.

Note the "goodix,main-clk" and "firmware-name" device-properties used
by the new code are *not* documented in the
Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
device-tree bindings for now.

Not documenting these is intentional. This is done because this code has
only been tested on x86/ACPI so far, where devicetree is not used.
Instead these properties are set through a software-fwnode attached to the
device by the drivers/platform/x86/touchscreen_dmi.c code. This means that
the use of this properties for now is purely a kernel-internal thing and
the name/working of the properties may still be changed for now.
Reviewed-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920150643.155872-7-hdegoede@redhat.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The config which needs to be send to the controller on some device-models
is model-specific. Allow specifying a model-specific filename through
a device-property, rather then always using a fixed filename.

Note the "goodix,config-name" device-property used by this is
*not* documented in the
Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
device-tree bindings for now.

Not documenting these is intentional. This is done because this code has
only been tested on x86/ACPI so far, where devicetree is not used.
Instead these properties are set through a software-fwnode attached to the
device by the drivers/platform/x86/touchscreen_dmi.c code. This means that
the use of this property for now is purely a kernel-internal thing and
the name/working of the property may still be changed for now.
Reviewed-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920150643.155872-6-hdegoede@redhat.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make the goodix_i2c_read() and goodix_i2c_write*() helpers log errors
themselves. This allows removing all the error logging from their callers.

This already results in a nice cleanup with the current code and it also
helps to make the upcoming support for controllers without flash cleaner.
Reviewed-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920150643.155872-5-hdegoede@redhat.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Refactor reset handling a bit, change the main reset handler
into a new goodix_reset_no_int_sync() helper and add a
goodix_reset() wrapper which calls goodix_int_sync()
separately.

Also push the dev_err() call on reset failure into the
goodix_reset_no_int_sync() and goodix_int_sync() functions,
so that we don't need to have separate dev_err() calls in
all their callers.

This is a preparation patch for adding support for controllers
without flash, which need to have their firmware uploaded and
need some other special handling too.
Reviewed-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920150643.155872-4-hdegoede@redhat.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add a goodix.h header file, and move the register definitions,
and struct declarations there and add prototypes for various
helper functions.

This is a preparation patch for adding support for controllers
without flash, which need to have their firmware uploaded and
need some other special handling too.

Since MAINTAINERS needs updating because of this change anyways,
also add myself as co-maintainer.
Reviewed-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920150643.155872-3-hdegoede@redhat.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Change the type of the goodix_i2c_write() len parameter to from 'unsigned'
to 'int' to avoid bare use of 'unsigned', changing it to 'int' makes
goodix_i2c_write()' prototype consistent with goodix_i2c_read().
Reviewed-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920150643.155872-2-hdegoede@redhat.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

There is a spelling mistake in the name  of a joystick. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210920184748.18519-1-colin.king@canonical.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() function.

[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSigned-off-by: NLen Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210911112716.10067-1-len.baker@gmx.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add a device tree binding for Cypress StreetFighter.
Signed-off-by: NYassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210907174341.422013-3-y.oudjana@protonmail.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This adds support for Cypress StreetFighter touchkey controllers such
as sf3155. This driver supports managing regulators and generating
input events.

Due to lack of documentation, this driver is entirely based on
information gathered from a driver written for an old Android kernel
fork[1][2].

[1] https://github.com/LineageOS/android_kernel_xiaomi_msm8996/blob/lineage-18.1/drivers/input/touchscreen/cyttsp_button.c
[2] https://github.com/LineageOS/android_kernel_xiaomi_msm8996/blob/lineage-18.1/arch/arm/boot/dts/qcom/a4-msm8996-mtp.dtsi#L291-L314Signed-off-by: NYassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20210907174341.422013-2-y.oudjana@protonmail.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This simplies the code a lot and fixes some potential resource leaks in
the error return paths.
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20210907200726.2034962-4-daniel@zonque.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The functions in the platform data struct to initialize, cleanup and
apply custom filters are not in use by any mainline board.

Remove support for them to pave the road for more cleanups to come.

The enum was moved as it has no users outside of the driver code
itself.
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Reviewed-by: NMarco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20210907200726.2034962-3-daniel@zonque.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This will make the code a bit more terse.
No functional change intended.
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Reviewed-by: NMarco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20210907200726.2034962-2-daniel@zonque.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

platform_get_irq() can fail here and we must check its return value.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add support reading device ID when controller is in bootloader mode, which
may happen if firmware update has been interrupted.
Signed-off-by: Nsimba.hsu <simba.hsu@rad-ic.com>
Link: https://lore.kernel.org/r/20210818063644.8654-1-simba.hsu@rad-ic.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The function cpcap_power_button_probe() does not perform
sufficient error checking after executing platform_get_irq(),
thus fix it.
Signed-off-by: NTang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20210802121740.8700-1-tangbin@cmss.chinamobile.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

As the ADC ladder input driver does not have any code or data located in
initmem, there is no need to annotate the adc_keys_driver structure with
__refdata.  Drop the annotation, to avoid suppressing future section
warnings.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/7091e8213602be64826fd689a7337246d218f3b1.1626255421.git.geert+renesas@glider.beSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

There is a spelling mistake in the Kconfig text. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210705100230.7583-1-colin.king@canonical.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

There is a spelling mistake in the Kconfig text. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210704095702.37567-1-colin.king@canonical.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Commit f3a73284 ("ARM: remove sirf prima2/atlas platforms") removes
the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig.

Hence, since then, the corresponding CSR Prima2 PWRC Driver is dead code.
Remove this dead driver.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210817072842.8640-1-lukas.bulwahn@gmail.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This keyboard driver is implementing a GPIO driver, so it need
to include <linux/gpio/driver.h> and not the legacy <linux/gpio.h>
header.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20210816232707.485031-1-linus.walleij@linaro.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This keyboard driver is implementing a GPIO driver, so it need
to include <linux/gpio/driver.h> and not the legacy <linux/gpio.h>
header.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210820222958.57238-1-linus.walleij@linaro.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the TI TSC2004/TSC2005 DT bindings to YAML schema.
Signed-off-by: NMarek Vasut <marex@denx.de>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210620210708.100147-1-marex@denx.deSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework.
Signed-off-by: NAlexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20210613233041.128961-4-alexander.sverdlin@gmail.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The LRADC can be a wakeup source and is listed as such in some DT
already. Let's make sure we allow that property in the binding.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210721140424.725744-21-maxime@cerno.techSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The Haptic feedback based on a regulator is supported by Linux thanks to
its device tree binding.

Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210721140424.725744-19-maxime@cerno.techSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The Pixcir Touchscreen Controller is supported by Linux thanks to
its device tree binding.

Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210721140424.725744-18-maxime@cerno.techSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The ChipOne ICN8318 Touchscreen Controller is supported by Linux thanks
to its device tree binding.

Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210721140424.725744-17-maxime@cerno.techSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

There is absolutely no reason to use comma operator in this code, 2
separate statements make much more sense.
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/YPsa1qCBn/SAmE5x@google.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Convert qcom PON binding from .txt to .yaml format.
Signed-off-by: Nsatya priya <skakit@codeaurora.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1620800053-26405-6-git-send-email-skakit@codeaurora.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Convert qcom pm8941 power key binding from .txt to .yaml format.

The example has been removed in favour of full example being
available in the qcom,pon.yaml binding.
Signed-off-by: Nsatya priya <skakit@codeaurora.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1620800053-26405-5-git-send-email-skakit@codeaurora.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Change 'additionalProperties' to true as this is a generic binding.
Signed-off-by: Nsatya priya <skakit@codeaurora.org>
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1620800053-26405-4-git-send-email-skakit@codeaurora.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>