This patch adds enums for 802.15.4 specific CCA settings.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Set hdev->set_bdaddr handler for ath3012. It sends the vendor specific HCI
command to change the public address. The change doesn't persist across
power cycle.
Signed-off-by: NToshi Kikuchi <toshik@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Merge tag 'mac80211-for-davem-2014-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
pull-request: mac80211 2014-12-18

Also from me a first pull request - we have a number of really old
issues that happened to crop up now with new work (or just more testing)
in the right areas as well as some small bugs newly introduced in 3.19.

Let me know if there are any problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Johan Hedberg says:

====================
pull request: bluetooth 2014-12-17

Here's the first direct (i.e. skipping the wireless tree) bluetooth pull
request for you, intended for 3.19. It's just one patch: a fix from
Marcel for for remote service discovery filtering which also fixes a
'used uninitialized' compiler warning.

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An earlier commit to resolve an issue with encapsulation offloads missed
setting a bit in the outer netdev features flag. This results in loss of TSO
feature on a VxLAN interface.

Fixes: 630f4b70 ("Export tunnel offloads only when a VxLAN tunnel is created")
Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Noticed when debugging ptp.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit bc96f648 (xen-netback: make
feature-rx-notify mandatory) incorrectly assumed that there were no
frontends in use that did not support this feature.  But the frontend
driver in MiniOS does not and since this is used by (qemu) stubdoms,
these stopped working.

Netback sort of works as-is in this mode except:

- If there are no Rx requests and the internal Rx queue fills, only
  the drain timeout will wake the thread.  The default drain timeout
  of 10 s would give unacceptable pauses.

- If an Rx stall was detected and the internal Rx queue is drained,
  then the Rx thread would never wake.

Handle these two cases (when feature-rx-notify is disabled) by:

- Reducing the drain timeout to 30 ms.

- Disabling Rx stall detection.
Reported-by: NJohn <jw@nuclearfallout.net>
Tested-by: NJohn <jw@nuclearfallout.net>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

http://marc.info/?l=linux-wireless&m=141883202530292&w=2

This makes it official... :-)
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

QSA module was getting decoded as QSFP module in ethtool get settings, this
patch fixes it.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, searching for a socket to add a reference to is not
synchronized with deletion of sockets. This can result in use
after free if there is another operation that is removing a
socket at the same time. Solving this requires both holding the
appropriate lock and checking the refcount to ensure that it
has not already hit zero.

Inspired by a related (but not exactly the same) issue in the
VXLAN driver.

Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver")
CC: Andy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sockets aren't currently removed from the the global list when
they are destroyed. In addition, offload handlers need to be cleaned
up as well.

Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver")
CC: Andy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each mmap Netlink frame contains a status field which indicates
whether the frame is unused, reserved, contains data or needs to
be skipped. Both loads and stores may not be reordeded and must
complete before the status field is changed and another CPU might
pick up the frame for use. Use an smp_mb() to cover needs of both
types of callers to netlink_set_status(), callers which have been
reading data frame from the frame, and callers which have been
filling or releasing and thus writing to the frame.

- Example code path requiring a smp_rmb():
  memcpy(skb->data, (void *)hdr + NL_MMAP_HDRLEN, hdr->nm_len);
  netlink_set_status(hdr, NL_MMAP_STATUS_UNUSED);

- Example code path requiring a smp_wmb():
  hdr->nm_uid	= from_kuid(sk_user_ns(sk), NETLINK_CB(skb).creds.uid);
  hdr->nm_gid	= from_kgid(sk_user_ns(sk), NETLINK_CB(skb).creds.gid);
  netlink_frame_flush_dcache(hdr);
  netlink_set_status(hdr, NL_MMAP_STATUS_VALID);

Fixes: f9c228 ("netlink: implement memory mapped recvmsg()")
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Checking the file f_count and the nlk->mapped count is not completely
sufficient to prevent the mmap'd area contents from changing from
under us during netlink mmap sendmsg() operations.

Be careful to sample the header's length field only once, because this
could change from under us as well.

Fixes: 5fd96123 ("netlink: implement memory mapped sendmsg()")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>

The optimization for filtering out extended inquiry results, advertising
reports or scan response data based on provided UUID list has a logic
bug. In case no match is found in the advertising data, the scan
response is ignored and not checked against the filter. This will lead
to events being filtered wrongly.

Change the code to actually only drop the events when the scan response
data is not present. If it is present, it needs to be checked against
the provided filter.

The patch is a bit more complex than it needs to be. That is because
it also fixes this compiler warning that some gcc versions produce.

  CC      net/bluetooth/mgmt.o
net/bluetooth/mgmt.c: In function ‘mgmt_device_found’:
net/bluetooth/mgmt.c:7028:7: warning: ‘match’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  bool match;
       ^

It seems that gcc can not clearly figure out the context of the match
variable. So just change the branches for the extended inquiry response
and advertising data around so that it is clear.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

When writing the code to allow per-station GTKs, I neglected to
take into account the management frame keys (index 4 and 5) when
freeing the station and only added code to free the first four
data frame keys.

Fix this by iterating the array of keys over the right length.

Cc: stable@vger.kernel.org
Fixes: e31b8213 ("cfg80211/mac80211: allow per-station GTKs")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The current implementations all use dev_uc_add_excl() and such whose API
doesn't support vlans, so we can't make it with NICs HW for now.

Fixes: f6f6424b ('net: make vid as a parameter for ndo_fdb_add/ndo_fdb_del')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@resnulli.us>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit contains 2 fixes for the 128B CQE/EQE stride feaure.
Wei found that mlx4_QUERY_HCA function marked the wrong capability
in flags (64B CQE/EQE), when CQE/EQE stride feature was enabled.
Also added small fix in initial CQE ownership bit assignment, when CQE
is size is not default 32B.

Fixes: 77507aa2 (net/mlx4: Enable CQE/EQE stride support)
Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do camera capture test on i.MX6q sabresd board, and save the capture data to
nfs rootfs. The command is:
gst-launch-1.0 -e imxv4l2src device=/dev/video1 num-buffers=2592000 ! tee name=t !
queue ! imxv4l2sink sync=false t. ! queue ! vpuenc ! queue ! mux. pulsesrc num-buffers=3720937
blocksize=4096 ! 'audio/x-raw, rate=44100, channels=2' ! queue ! imxmp3enc ! mpegaudioparse !
queue ! mux. qtmux name=mux ! filesink location=video_recording_long.mov

After about 10 hours running, there have net watchdog timeout kernel dump:
...
WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x2b4/0x2d8()
NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.24-01051-gdb840b7 #440
[<80014e6c>] (unwind_backtrace) from [<800118ac>] (show_stack+0x10/0x14)
[<800118ac>] (show_stack) from [<806ae3f0>] (dump_stack+0x78/0xc0)
[<806ae3f0>] (dump_stack) from [<8002b504>] (warn_slowpath_common+0x68/0x8c)
[<8002b504>] (warn_slowpath_common) from [<8002b558>] (warn_slowpath_fmt+0x30/0x40)
[<8002b558>] (warn_slowpath_fmt) from [<8055e0d4>] (dev_watchdog+0x2b4/0x2d8)
[<8055e0d4>] (dev_watchdog) from [<800352d8>] (call_timer_fn.isra.33+0x24/0x8c)
[<800352d8>] (call_timer_fn.isra.33) from [<800354c4>] (run_timer_softirq+0x184/0x220)
[<800354c4>] (run_timer_softirq) from [<8002f420>] (__do_softirq+0xc0/0x22c)
[<8002f420>] (__do_softirq) from [<8002f804>] (irq_exit+0xa8/0xf4)
[<8002f804>] (irq_exit) from [<8000ee5c>] (handle_IRQ+0x54/0xb4)
[<8000ee5c>] (handle_IRQ) from [<80008598>] (gic_handle_irq+0x28/0x5c)
[<80008598>] (gic_handle_irq) from [<800123c0>] (__irq_svc+0x40/0x74)
Exception stack(0x80d27f18 to 0x80d27f60)
7f00:                                                       80d27f60 0000014c
7f20: 8858c60e 0000004d 884e4540 0000004d ab7250d0 80d34348 00000000 00000000
7f40: 00000001 00000000 00000017 80d27f60 800702a4 80476e6c 600f0013 ffffffff
[<800123c0>] (__irq_svc) from [<80476e6c>] (cpuidle_enter_state+0x50/0xe0)
[<80476e6c>] (cpuidle_enter_state) from [<80476fa8>] (cpuidle_idle_call+0xac/0x154)
[<80476fa8>] (cpuidle_idle_call) from [<8000f174>] (arch_cpu_idle+0x8/0x44)
[<8000f174>] (arch_cpu_idle) from [<80064c54>] (cpu_startup_entry+0x100/0x158)
[<80064c54>] (cpu_startup_entry) from [<80cd8a9c>] (start_kernel+0x304/0x368)
---[ end trace 09ebd32fb032f86d ]---
...

There might have a race in napi_schedule(), leaving interrupts disabled forever.
After these patch, the case still work more than 40 hours running.
Signed-off-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After d75b1ade (net: less interrupt
masking in NAPI) the napi instance is removed from the per-cpu list
prior to calling the n->poll(), and is only requeued if all of the
budget was used.  This inadvertently broke netfront because netfront
does not use NAPI correctly.

If netfront had not used all of its budget it would do a final check
for any Rx responses and avoid calling napi_complete() if there were
more responses.  It would still return under budget so it would never
be rescheduled.  The final check would also not re-enable the Rx
interrupt.

Additionally, xenvif_poll() would also call napi_complete() /after/
enabling the interrupt.  This resulted in a race between the
napi_complete() and the napi_schedule() in the interrupt handler.  The
use of local_irq_save/restore() avoided by race iff the handler is
running on the same CPU but not if it was running on a different CPU.

Fix both of these by always calling napi_compete() if the budget was
not all used, and then calling napi_schedule() if the final checks
says there's more work.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The encap->type comes straight from Netlink. Validate it against
max supported encap types just like ip_encap_hlen() already does.

Fixes: a8c5f9 ("ip_tunnel: Ops registration for secondary encap (fou, gue)")
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The symbols are exported and could be used by external modules.

Fixes: a8c5f9 ("ip_tunnel: Ops registration for secondary encap (fou, gue)")
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John W. Linville says:

====================
pull request: wireless 2014-12-16

Please pull this batch of fixes intended for the 3.19 stream!

For the Bluetooth bits, Johan says:

"The patches consist of:

 - Coccinelle warning fix
 - hci_dev_lock/unlock fixes
 - Fixes for pending mgmt command handling
 - Fixes for properly following the force_lesc_support switch
 - Fix for a Microsoft branded Broadcom adapter
 - New device id for Atheros AR3012
 - Fix for BR/EDR Secure Connections enabling"

Along with that...

Brian Norris avoids leaking some kernel memory contents via printk in brcmsmac.

Julia Lawall corrects some misspellings in a few drivers.

Larry Finger gives us one more rtlwifi fix to correct a porting oversight.

Wei Yongjun fixes a sparse warning in rtlwifi.

Please let me know if there are problems!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise we get things like:

warning: (NET_DSA_BCM_SF2 && BCMGENET && SYSTEMPORT) selects FIXED_PHY which has unmet direct dependencies (NETDEVICES && PHYLIB=y)

In order to make this work we have to rename fixed.c to fixed_phy.c
because the regulator drivers already have a module named "fixed.o".
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael S. Tsirkin says:

====================
tun/macvtap: TUNSETIFF fixes

Dan Carpenter reported the following:
	static checker warning:

		drivers/net/tun.c:1694 tun_set_iff()
		warn: 0x17100 is larger than 16 bits

	drivers/net/tun.c
	  1692
	  1693          tun->flags = (tun->flags & ~TUN_FEATURES) |
	  1694                  (ifr->ifr_flags & TUN_FEATURES);
	  1695

	It's complaining because the "ifr->ifr_flags" variable is a short
	(should it be unsigned?).  The new define:

	#define IFF_VNET_LE    0x10000

	doesn't fit in two bytes.  Other suspect looking code could be:

		return __virtio16_to_cpu(q->flags & IFF_VNET_LE, val);

And that's true: we have run out of IFF flags in tun.

So let's not try to add more: add simple GET/SET ioctls
instead. Easy to test, leads to clear semantics.

Alternatively we'll have to revert the whole thing for 3.19,
but that seems more work as this has dependencies
in other places.

While here, I noticed that macvtap was actually reading
ifreq flags as a 32 bit field.
Fix that up as well.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Everyone should use TUNSETVNETLE/TUNGETVNETLE instead.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use TUNSETVNETLE/TUNGETVNETLE instead.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use TUNSETVNETLE/TUNGETVNETLE instead.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ifreq flags field is only 16 bit wide, so setting IFF_VNET_LE there has
no effect:
doesn't fit in two bytes.

The tests passed apparently because they have an even number of bugs,
all cancelling out.

Luckily we didn't release a kernel with this flag, so it's
not too late to fix this.

Add TUNSETVNETLE/TUNGETVNETLE to really achieve the purpose
of IFF_VNET_LE.

This has an added benefit that if we ever want a BE flag,
we won't have to deal with weird configurations like
setting both LE and BE at the same time.

IFF_VNET_LE will be dropped in a follow-up patch.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

flags field in ifreq is only 16 bit wide, but
we read it as a 32 bit value.
If userspace doesn't zero-initialize unused fields,
this will lead to failures.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: broadcom: fix FIXED_PHY dependencies

This patch series removes the bogus "select FIXED_PHY if FOO=y" that I have
been using in GENET, SYSTEMPORT and the SF2 DSA switch driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to do the following:

select FIXED_PHY if NET_DSA_BCM_SF2=y, as this implies that we will not be
able to build and/or run the driver correctly when built as a module,
which is no longer an issue since commit 37e9a690 ("net: phy: export
fixed_phy_register()").

Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to do the following:

select FIXED_PHY if SYSTEMPORT=y, as this implies that we will not be able
to build and/or run the driver correctly when built as a module, which
is no longer an issue since commit 37e9a690 ("net: phy: export
fixed_phy_register()")

Fixes: a3862db2 ("net: systemport: hook SYSTEMPORT driver in the build")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to do the following:

select FIXED_PHY if BCMGENET=y, as this implies that we will not be able
to build and/or run the driver correctly when built as a module, which
is no longer an issue since commit 37e9a690 ("net: phy: export
fixed_phy_register()")

Fixes: b0ba512e225d ("net: bcmgenet: enable driver to work without device tree"
Fixes: bdaa53bd ("net: bcmgenet: hook into the build system")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The setting of this flag was missed in previous modifications.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Debug code prints the fifo name via custom dev_warn() wrappers. The
fifo_names array is only non-zero when debugging is manually enabled,
which is all well and good. However, it's *not* good that this array
uses zero-length arrays in the non-debug case, and so it doesn't
actually have any memory allocated to it. This means that as far as we
know, fifo_names[i] actually points to garbage memory.

I've seen this in my log:

[ 4601.205511] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: �GeL txop exceeded phylen 137/256 dur 1602/1504

So let's give this array space enough to fill it with a NULL byte.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com>
Cc: Hante Meuleman <meuleman@broadcom.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list@broadcom.com
Cc: netdev@vger.kernel.org
Acked-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fixes the following sparse warning:

drivers/net/wireless/rtlwifi/rtl8192cu/hw.c:1595:6: warning:
 symbol 'usb_cmd_send_packet' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Replace a misspelled function name by %s and then __func__.

8821 was written as 8812.

This was done using Coccinelle, including the use of Levenshtein distance,
as proposed by Rasmus Villemoes.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Replace a misspelled function name by %s and then __func__.

This was done using Coccinelle, including the use of Levenshtein distance,
as proposed by Rasmus Villemoes.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Replace a misspelled function name by %s and then __func__.

This was done using Coccinelle, including the use of Levenshtein distance,
as proposed by Rasmus Villemoes.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next