From: Matt Domsch <Matt_Domsch@dell.com>

The patch below implements the Microsoft Point-to-Point Encryption method
as a PPP compressor/decompressor.  This is necessary for Linux clients and
servers to interoperate with Microsoft Point-to-Point Tunneling Protocol
(PPTP) servers (either Microsoft PPTP servers or the poptop project) which
use MPPE to encrypt data when creating a VPN.

This patch differs from the kernel_ppp_mppe DKMS pacakge at
pptpclient.sourceforge.net by utilizing the kernel crypto routines rather
than providing its own SHA1 and arcfour implementations.

Minor changes to ppp_generic.c try to prevent a link from disabling
compression (in our case, the encryption) after it has started using
compression (encryption).

Feedback to <pptpclient-devel@lists.sourceforge.net> please.
Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com>
Cc: James Cameron <james.cameron@hp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NBrice Goglin <Brice.Goglin@ens-lyon.org>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hi,
This patch  provides dynamic two buffer-mode and 3 buffer-mode options.
Previously 2 buffer-mode was compilation option. Now with this patch applied
one can load driver in 2 buffer-mode with module-load parameter

ie.
#insmod s2io.ko rx_ring_mode=2

This patch also provides 3 buffer-mode which provides header separation
functionality. In 3 buffer-mode skb->data will have L2/L3/L4 headers and
"skb_shinfo(skb)->frag_list->data" will have have L4 payload.
one can load driver in 3 buffer-mode with same above module-load parameter

ie.
#insmod s2io.ko rx_ring_mode=3

Please review the patch.
Signed-off-by: NAnanda Raju <ananda.raju@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

No longer maintained

Add PowerPC 440GR support
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NEugene Surovegin <ebs@ebshome.net>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch replaces current PowerPC 4xx EMAC driver with
new, re-written from the scratch version. This patch is quite big
(~234K) because there is virtualy 0% of common code between old and
new version.

New driver uses NAPI, it solves stability problems under heavy packet
load and low memory, corrects chip register access and fixes numerous
small bugs I don't even remember now.

This patch has been tested on all supported in 2.6 PPC 4xx boards.
It's been used in production for almost a year now on custom
4xx hardware. PPC32 specific parts are already upstream.

Patch was acked by the current EMAC driver maintainer (Matt Porter). I
will be maintaining this new version.
Signed-off-by: NEugene Surovegin <ebs@ebshome.net>
--

 Kconfig                   |   72
 ibm_emac/Makefile         |   13
 ibm_emac/ibm_emac.h       |  418 +++--
 ibm_emac/ibm_emac_core.c  | 3414 ++++++++++++++++++++++++----------------------
 ibm_emac/ibm_emac_core.h  |  313 ++--
 ibm_emac/ibm_emac_debug.c |  377 ++---
 ibm_emac/ibm_emac_debug.h |   63
 ibm_emac/ibm_emac_mal.c   |  674 +++++----
 ibm_emac/ibm_emac_mal.h   |  336 +++-
 ibm_emac/ibm_emac_phy.c   |  335 ++--
 ibm_emac/ibm_emac_phy.h   |  105 -
 ibm_emac/ibm_emac_rgmii.c |  201 ++
 ibm_emac/ibm_emac_rgmii.h |   68
 ibm_emac/ibm_emac_tah.c   |  111 +
 ibm_emac/ibm_emac_tah.h   |   96 -
 ibm_emac/ibm_emac_zmii.c  |  255 +++
 ibm_emac/ibm_emac_zmii.h  |  114 -
 17 files changed, 4114 insertions(+), 2851 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

IXDP2x01 systems can be built without PCI network cards, so we should not
require NET_PCI to build CS89x0 on these systems.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The documentation about s2io is available at
Documentation/networking/s2io.txt.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Patch from Jon Ringle

This patch gives support for the CS8900A ethernet chip on the Comdial MP1000

Signed-off-by: Jon Ringle
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/Kconfig   |    8 +
 drivers/net/Makefile  |    1
 drivers/net/mipsnet.c |  371 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/mipsnet.h |  127 +++++++++++++++++
 4 files changed, 507 insertions(+)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch changes pocket and parallel adaptors to depend on PARPORT
instead of ISA in order to get the option in newer SuperIO based systems.
Signed-off-by: NGrant Coady <gcoady@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Written by Adrian Sun (asun@darksunrising.com).
Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>.
Further cleaned up and integrated by David S. Miller
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Adds an "Ethernet" driver which sends Ethernet packets over the standard
RapidIO messaging.  This depends on the core RIO patch for mailbox/doorbell
access.
Signed-off-by: NMatt Porter <mporter@kernel.crashing.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Merge of four previous patches and the Kconfig fix
 * Remove debug printk's
 * whitespace cleanup and version number change
 * clear interrupts, reset phy, and reset hardware on shutdown
 * ignore 64bit counter overflow interrupts
 * fix a couple of places where second port could clobber state
   of first port.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Add configuration support for the FEC ethernet controller in the
Freescale 523x processor family. Also add and option to configure
the second FEC controller on some Freescale processors.
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a driver for a new 1000 Mbit ethernet NIC.  It is
integrated on the south bridge that is used for our Cell Blades.

The code gets the MAC address from the Open Firmware device tree, so it
won't compile on platforms other than ppc64.

This is the first public release, so I don't expect the first version to
get merged, but I'd aim for integration within the 2.6.13 time frame.

Cc: Utz Bacher <utz.bacher@de.ibm.com>
Signed-off-by: NArnd Bergmann <arndb@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

driver is non-modular
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The sis191 is the gigabit brother of the sis190. SiS's driver suggests
that the register set is backward compatible: this should hopefully
give a basic driver.

The device should allow the usual features from a modern ethernet
adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far
the relevant register layout is not documented. SiS's driver does
not provide these features either (at least not for Linux).
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Patch from Sascha Hauer

This patch adds support for setting and getting RTS / CTS via
set_mtctrl / get_mctrl functions.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

emac doesn't build modular; ibm_emac_debug doesn't build at all (missing
headers).
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SIS190 must select MII since it's using it.

While I was editing the Kconfig entry, I also converted the spaces to
tabs.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

ethernet drivers to remain as ignorant as is reasonable of the connected
PHY's design and operation details.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Raise the sis190 driver from the dead

The driver handles the integrated network device found on SiS 965L
chipset. It follows the classical (non-napi) interrupt-driven model
and provides minimal ethtool support.

The code comes from a heavy cleanup/rewrite of the original code
which was removed from the kernel on 14/04/2004. Since the r8169
driver does not work too bad and there will probably be (at least)
a few months of improvements/testing/fixing, I made the code as
close as possible to the r8169 one.

Pascal Chapperon <pascal.chapperon@wanadoo.fr> deserves some special
credit for testing and bug-catching. Many thanks to Lars Vahlenberg
as well.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Move in_aton to allow netpoll and pktgen to work without the rest of
the IPv4 stack. Fix whitespace and add comment for the odd placement.

Delete now-empty net/ipv4/utils.c

Re-enable netpoll/netconsole without CONFIG_INET
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Suggestion from Sam Ravnborg <sam@ravnborg.org>

It causes all driver families to be displayed aligned immediately under the
main network drivers heading (in menuconfig/xconfig/gconfig) instead of
not being subordinate to (i.e., not indented) the Network device support
heading at all.
The improved network driver families are:
  token ring, wireless, PCMCIA, WAN, ATM, and S390.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NETCONSOLE=y and INET=n results in the following compile error:

net/built-in.o: In function `netpoll_parse_options':
: undefined reference to `in_aton'
net/built-in.o: In function `netpoll_parse_options':
: undefined reference to `in_aton'
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Put NETCONSOLE and NETPOLL options together since they are related.
This cuts down on the hassle of flipping back and forth between
the Networking menu and the Network drivers menu to change their
config settings.

Tested with menuconfig, gconfig, and xconfig.
gconfig has a small problem with this.  I think that it's
a bug in gconfig and I will take it up with Romain Lievin.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create a new top-level menu named "Networking" thus moving
net related options and protocol selection way from the drivers
menu and up on the top-level where they belong.

To implement this all architectures has to source "net/Kconfig" before
drivers/*/Kconfig in their Kconfig file. This change has been
implemented for all architectures.

Device drivers for ordinary NIC's are still to be found
in the Device Drivers section, but Bluetooth, IrDA and ax25
are located with their corresponding menu entries under the new
networking menu item.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to provide support for cs89x0-based network device on
Philips' pnx0105 board.
Signed-off-by: Ndmitry pervushin <dpervushin@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

The 8129/8130 support is a sub-option that is not visible if the user
hasn't enabled the 8139 support.

Let's make it a bit easier for users to find the driver for their nic.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

A new driver bnx2 for Broadcom bcm5706 is available.

The patch also includes new 1000BASE-X advertisement bit definitions in
mii.h

Thanks to David Miller and Jeff Garzik for reviewing and their valuable
feedback.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio
(http://www.chelsio.com).  This driver supports the Chelsio N210 NIC and is
backward compatible with the Chelsio N110 model 10Gb NICs.  It supports
AMD64, EM64T and x86 systems.
Signed-off-by: NTina Yang <tinay@chelsio.com>
Signed-off-by: NScott Bardone <sbardone@chelsio.com>
Signed-off-by: NChristoph Lameter <christoph@lameter.com>

Adrian said:

- my3126.c is unused (because t1_my3126_ops isn't used anywhere)
- what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for?
- $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded
- completely unused global functions:
  - espi.c: t1_espi_get_intr_counts
  - sge.c: t1_sge_get_intr_counts
- the following functions can be made static:
  - sge.c: t1_espi_workaround
  - sge.c: t1_sge_tx
  - subr.c: __t1_tpi_read
  - subr.c: __t1_tpi_write
  - subr.c: t1_wait_op_done

shemminger said:

The performance recommendations in cxgb.txt are common to all fast devices,
and should be in one file rather than just for this device. I would rather
see ip-sysctl.txt updated or a new file on tuning recommendations started.
Some of them have consequences that aren't documented well.
For example, turning off TCP timestamps risks data corruption from sequence wrap.

A new driver shouldn't need so may #ifdef's unless you want to putit on older
vendor versions of 2.4

Some accessor and wrapper functions like:
        t1_pci_read_config_4
        adapter_name
        t1_malloc
are just annoying noise.

Why have useless dead code like:

/* Interrupt handler */
+static int pm3393_interrupt_handler(struct cmac *cmac)
+{
+       u32 master_intr_status;
+/*
+    1. Read master interrupt register.
+    2. Read BLOCK's interrupt status registers.
+    3. Handle BLOCK interrupts.
+*/

Jeff said:

step 1:  kill all the OS wrappers.

 And do you really need hooks for multiple MACs, when only one MAC is
 really supported?  Typically these hooks are at a higher level anyway --
 struct net_device.

From: Christoph Lameter <christoph@lameter

Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian
Bunk.  Reduces the size of the driver to ~260k.

- clean up tabs
- removed my3126.c
- removed 85% of suni1x10gexp_regs.h
- removed 80% of regs.h
- removed various calls, renamed variables/functions.
- removed system specific and other wrappers (usleep, msleep)
- removed dead code
- dropped redundant casts in osdep.h
- dropped redundant check of kfree
- dropped weird code (MODVERSIONS stuff)
- reduced number of #ifdefs
- use kcalloc now instead of kmalloc
- Add information about known issues with the driver
- Add information about authors
Signed-off-by: NScott Bardone <sbardone@chelsio.com>
Signed-off-by: NChristoph Lameter <christoph@lameter.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

diff -puN /dev/null Documentation/networking/cxgb.txt

This patch adds support for the davicom dm9000 network driver.  The dm9000
is found on some embedded arm boards such as the pimx1 or the scb9328.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

diff -puN /dev/null drivers/net/dm9000.c

This patch fixes the following compile error caused by bk-netdev:

<--  snip  -->

...
  LD      .tmp_vmlinux1
drivers/built-in.o(.text+0x98528): In function `sis900_get_settings':
: undefined reference to `mii_ethtool_gset'
drivers/built-in.o(.text+0x98538): In function `sis900_set_settings':
: undefined reference to `mii_ethtool_sset'
drivers/built-in.o(.text+0x98517): In function `sis900_get_link':
: undefined reference to `mii_link_ok'
drivers/built-in.o(.text+0x98547): In function `sis900_nway_reset':
: undefined reference to `mii_nway_restart'
make: *** [.tmp_vmlinux1] Error 1

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDaniele Venzano <venza@brownhat.org>

  
  The options FMV18X and SK_G16 do depend on the non-available
  CONFIG_OBSOLETE even in kernel 2.4 - IOW, the last time it was able to
  select them was in kernel 2.2 (or even before).
  
  Since it seems noone misses these drivers, this patch removes them.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Drivers that expect ISA DMA API are marked as such in Kconfig.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch allows Kconfig to build the MV643xx ethernet driver on Pegasos
(CONFIG_PPC_MULTIPLATFORM) and adds what I think is a missing fix from
Dale's batch, that is remove SA_INTERRUPT and add SA_SHIRQ in there as the
interrupt is shared if I understand things correctly.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NFabio Massimo Di Nitto <fabbione@ubuntu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>