Loop through all VMIDs for gmc_v10_0_flush_gpu_tlb_pasid and
gmc_v11_0_flush_gpu_tlb_pasid (only if using MES for gmc_v10). This is
required for MES due to use_different_vmid_compute causing SDMA queues
to be assigned different VMIDs than compute for the same PASID.
Signed-off-by: NGraham Sider <Graham.Sider@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixed some errors and warnings found by checkpatch.pl.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRuijing Dong <ruijing.dong@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- remove multiple queue support
- add unified queue related functions
Acked-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NRuijing Dong <ruijing.dong@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- add unified queue headers
- add unified queue ib tests
Acked-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NRuijing Dong <ruijing.dong@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the same pattern as the DML Makefile and while we are here
add a missing x86 guard around the msse flags for DCN3.2.x.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit d8e4fb91.

This is no longer necessary as newer patches require these functions
without CONFIG_DRM_AMD_DC_DCN.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1542:11:
warning: variable 'i' set but not used [-Wunused-but-set-variable]
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

enable_mes and enable_mes_kiq are set in both device init and
MES IP init. Leave the ones in MES IP init, since it is
a more accurate way to judge from GC IP version.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJack Xiao <Jack.Xiao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
All displays need to be blanked during the uclk OC interface so that we can
guarantee pstate switching support. If the display config doesn't support
pstate switching, only using core_link_disable_stream will not enable it
as the front-end is untouched. We need to go through the full plane removal
sequence to properly program the pipe to allow pstate switching.

[How]
 - guard clk_mgr functions with non-NULL checks
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
dc_submit_i2c_oem could be called with ddc null

[how]
add null check and fail the call instead
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NMartin Leung <martin.leung@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
need to add timing adjustment for fva.

[how]
add hook to optc and hwseq.
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
The display driver on some OSes need to track it in order to
perform memory clock switching decisions.

[HOW]
Propagate the vrr active state to dirty bit so that on mode set it
disables dynamic memory clock switching.
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NHarry VanZyllDeJong <harry.vanzylldejong@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
New features will require knowing the vrr mode for their enablement.

[HOW]
Pass the state via a member of dc_stream.
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NFelipe Clark <Felipe.Clark@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Video Timing Extended Metadata packet (VTEM) is required for features
like VRR and FVA

[How]
Adding support for VTEM transmission to stream encoders in DCN20 and DCN30
as part of FVA support
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NAhmad Othman <ahmad.othman@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Miss to copy hfvsif_infopacket when copying stream updates.
Check and copy it.
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
- Currently there is no support for HF-VSIF
- The current support of VSIF is limited to H14b infoframe

[How]
- refactor VSIF
- Added new builder for HF-VSIF
- Added the HF-VSIF packet to DisplayTarget
- Updates DC to apply HF-VSIF updates when updating streams
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NAhmad Othman <ahmad.othman@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Memory clock switching has great potential for power savings.

[HOW]
The driver code was modified to notify the DMCUB firmware that it should
stretch the vertical blank of frames when a memory clock switch is about
to start so that no blackouts happen on the screen due to unavailability
of the frame buffer.
The driver logic to determine when such firmware assisted strategy can
be initiated is also implemented and consists on checking prerequisites
of the feature.
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NFelipe Clark <felipe.clark@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
- missing in dcn30 function
- Fix a divide by 0 when ACR trigger

[How]
- Add IS_SMU_TIMEOUT() to dcn30_smu_send_msg_with_param
- Add zero check in dcn20_update_clocks_update_dentist
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NIan Chen <ian.chen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & how]
Fix format and typo of comments.
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NSamson Tam <Samson.Tam@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why and How]
dwbc_funcs.set/get_privacy_mask isn't being used anymore, drop it
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NOliver Logush <oliver.logush@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along the following:
- DP fixes
- Exiting idle optimizations on mouse updates
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DIO parameters were missing in topology_update_intput_v3 struct.

[How]
Add DIO parameters in v3 struct and update in functions perspectively.
Reviewed-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
- Have option to exit idle opt on cursor updates
for debug and optimizations purposes
Reviewed-by: NSamson Tam <Samson.Tam@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why] when 4k@144hz dp connect to dp1.4 dsc mst hub, requested
bandwidth exceeds caps of dsc hub. but dsc bw valid functions,
increase_dsc_bpp, try_disable_dsc, pre_validate_dsc,
compute_mst_dsc_configs_for_state, do not return false to
atomic check. this cause user mode initiate mode set to kernel,
then cause kernel assert, system hang.

[How] dsc bandwidth valid functions return pass or fail to atomic
check.
Reviewed-by: NWayne Lin <Wayne.Lin@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nhersen wu <hersenxs.wu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
For a some specific monitors, when connected on boot or hot plug,
monitor flash for 1/2 seconds can happen during first HDCP query
operation. Ading some delay in the init sequence for these monitors
fixes the issue, so it is implemented as monitor specific patch.
Co-authored-by: NShah Dharati <dharshah@amd.com>
Reviewed-by: NHansen Dsouza <Hansen.Dsouza@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NShah Dharati <dharshah@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
According to DP specs, in EQ DONE phase of link training, we
should lower lane count when at least one CR DONE bit is set to 1, while
lower link rate when all CR DONE bits are 0s. However in our code, we will
treat both cases as latter. This is not exactly correct based on the specs
expectation.

[how]
Check lane0 CR DONE bit when it is still set but CR DONE fails,
we treat it as a partial CR DONE failure in EQ DONE phase, we
will follow the same fallback flow as when ED DONE fails in EQ
DONE phase.
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a new KFD ioctl to return the largest possible memory size that
can be allocated as a buffer object using
kfd_ioctl_alloc_memory_of_gpu. It attempts to use exactly the same
accept/reject criteria as that function so that allocating a new
buffer object of the size returned by this new ioctl is guaranteed to
succeed, barring races with other allocating tasks.

This IOCTL will be used by libhsakmt:
https://www.mail-archive.com/amd-gfx@lists.freedesktop.org/msg75743.htmlSigned-off-by: NDaniel Phillips <Daniel.Phillips@amd.com>
Signed-off-by: NDavid Yat Sin <David.YatSin@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 2cfe34e1.
Enable AGP aperture cause SDMA page fault for gfx11.0.2,
so temp disable AGP aperture until SDMA FW resolved this.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NJack Gui <Jack.Gui@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable BAMACO reset support for SMU 13.0.0.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The feature is ready with latest PMFW and IFWI.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
To reduce stack usage, move some variables into heap in the DML function
dml32_ModeSupportAndSystemConfigurationFull()

Fixes: dda4fb85 ("drm/amd/display: DML changes for DCN32/321")
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

There is a theoretical problem in prior patches for reducing the stack
size of *update_bw_bounding_box() functions.

By modifying the soc.clock_limits[n] struct directly, this can cause
unintended behavior as the for loop attempts to swap rows in
clock_limits[n]. A temporary struct is still required to make sure we
stay functinoally equivalent.

[How]

Add a temporary clock_limits table to the SOC struct, and use it when
swapping rows.
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The commit below changed the TTM manager size unit from pages to
bytes, but failed to adjust the corresponding calculations in
amdgpu_ioctl.

Fixes: dfa714b8 ("drm/amdgpu: remove GTT accounting v2")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1930
Bug: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6642Tested-by: NMartin Roukala <martin.roukala@mupuf.org>
Tested-by: NMike Lothian <mike@fireburn.co.uk>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <mdaenzer@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The EnableGfxImu message will be issued in the set_gfx_power_up_by_imu.
Signed-off-by: NTim Huang <tim.huang@amd.com>
Reviewed-by: NYifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For SMU IP v13.0.4, the smnMP1_FIRMWARE_FLAGS address is different,
we need this to correct the reading address.
Signed-off-by: NTim Huang <tim.huang@amd.com>
Reviewed-by: NYifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
There are cases where swizzle modes are set but modifiers arent. For
such a userspace, we need not check modifiers while checking
compatibilty in the drm hook for checking plane format.

Ignore checking modifiers but check the DCN generation for the
supported swizzle mode.

v2: squash in unused variable removal (Alex)
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GPA mode should be disabled in direct load.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NTim Huang <Tim.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable vcn/jpeg 4_0_2.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NTim Huang <Tim.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

issue calltrace:
[  402.773695] [drm] failed to load ucode SMC(0x2C)
[  402.773754] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0x0)
[  402.773762] [drm:psp_load_smu_fw [amdgpu]] *ERROR* PSP load smu failed!
[  402.966758] [drm:psp_v13_0_ring_destroy [amdgpu]] *ERROR* Fail to stop psp ring
[  402.966949] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[  402.967116] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
[  402.967252] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_init failed
[  402.967255] amdgpu 0000:03:00.0: amdgpu: Fatal error during GPU init

if not reset mp1 state during kernel driver unload, it will cause psp
load pmfw fail at the second time.

add PPSMC_MSG_PrepareMp1ForUnload support for smu_v13_0_0/smu_v13_0_7
Signed-off-by: NYang Wang <KevinYang.Wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>