To differentiate from libperf's 'struct perf_evlist' methods.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To differentiate from libperf's 'struct perf_evlist' methods.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To differentiate from libperf's 'struct perf_evlist' methods.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For perf list, the CPU core PMU HW event ordering is such that not all
events may will be listed adjacent - consider this example:

  $ tools/perf/perf list

  List of pre-defined events (to be used in -e):

    duration_time                                      [Tool event]

    branch-instructions OR cpu/branch-instructions/    [Kernel PMU event]
    branch-misses OR cpu/branch-misses/                [Kernel PMU event]
    bus-cycles OR cpu/bus-cycles/                      [Kernel PMU event]
    cache-misses OR cpu/cache-misses/                  [Kernel PMU event]
    cache-references OR cpu/cache-references/          [Kernel PMU event]
    cpu-cycles OR cpu/cpu-cycles/                      [Kernel PMU event]
    cstate_core/c3-residency/                          [Kernel PMU event]
    cstate_core/c6-residency/                          [Kernel PMU event]
    cstate_core/c7-residency/                          [Kernel PMU event]
    cstate_pkg/c2-residency/                           [Kernel PMU event]
    cstate_pkg/c3-residency/                           [Kernel PMU event]
    cstate_pkg/c6-residency/                           [Kernel PMU event]
    cstate_pkg/c7-residency/                           [Kernel PMU event]
    cycles-ct OR cpu/cycles-ct/                        [Kernel PMU event]
    cycles-t OR cpu/cycles-t/                          [Kernel PMU event]
    el-abort OR cpu/el-abort/                          [Kernel PMU event]
    el-capacity OR cpu/el-capacity/                    [Kernel PMU event]

Notice in the above example how the cstate_core PMU events are mixed in
the middle of the CPU core events.

For my arm64 platform, all the uncore events get mixed in, making the list
very disorganised:

    page-faults OR faults                              [Software event]
    task-clock                                         [Software event]
    duration_time                                      [Tool event]
    L1-dcache-load-misses                              [Hardware cache event]
    L1-dcache-loads                                    [Hardware cache event]
    L1-icache-load-misses                              [Hardware cache event]
    L1-icache-loads                                    [Hardware cache event]
    branch-load-misses                                 [Hardware cache event]
    branch-loads                                       [Hardware cache event]
    dTLB-load-misses                                   [Hardware cache event]
    dTLB-loads                                         [Hardware cache event]
    iTLB-load-misses                                   [Hardware cache event]
    iTLB-loads                                         [Hardware cache event]
    br_mis_pred OR armv8_pmuv3_0/br_mis_pred/          [Kernel PMU event]
    br_mis_pred_retired OR armv8_pmuv3_0/br_mis_pred_retired/ [Kernel PMU event]
    br_pred OR armv8_pmuv3_0/br_pred/                  [Kernel PMU event]
    br_retired OR armv8_pmuv3_0/br_retired/            [Kernel PMU event]
    br_return_retired OR armv8_pmuv3_0/br_return_retired/ [Kernel PMU event]
    bus_access OR armv8_pmuv3_0/bus_access/            [Kernel PMU event]
    bus_cycles OR armv8_pmuv3_0/bus_cycles/            [Kernel PMU event]
    cid_write_retired OR armv8_pmuv3_0/cid_write_retired/ [Kernel PMU event]
    cpu_cycles OR armv8_pmuv3_0/cpu_cycles/            [Kernel PMU event]
    dtlb_walk OR armv8_pmuv3_0/dtlb_walk/              [Kernel PMU event]
    exc_return OR armv8_pmuv3_0/exc_return/            [Kernel PMU event]
    exc_taken OR armv8_pmuv3_0/exc_taken/              [Kernel PMU event]
    hisi_sccl1_ddrc0/act_cmd/                          [Kernel PMU event]
    hisi_sccl1_ddrc0/flux_rcmd/                        [Kernel PMU event]
    hisi_sccl1_ddrc0/flux_rd/                          [Kernel PMU event]
    hisi_sccl1_ddrc0/flux_wcmd/                        [Kernel PMU event]
    hisi_sccl1_ddrc0/flux_wr/                          [Kernel PMU event]
    hisi_sccl1_ddrc0/pre_cmd/                          [Kernel PMU event]
    hisi_sccl1_ddrc0/rnk_chg/                          [Kernel PMU event]

...

    hisi_sccl7_l3c21/wr_hit_cpipe/                     [Kernel PMU event]
    hisi_sccl7_l3c21/wr_hit_spipe/                     [Kernel PMU event]
    hisi_sccl7_l3c21/wr_spipe/                         [Kernel PMU event]
    inst_retired OR armv8_pmuv3_0/inst_retired/        [Kernel PMU event]
    inst_spec OR armv8_pmuv3_0/inst_spec/              [Kernel PMU event]
    itlb_walk OR armv8_pmuv3_0/itlb_walk/              [Kernel PMU event]
    l1d_cache OR armv8_pmuv3_0/l1d_cache/              [Kernel PMU event]
    l1d_cache_refill OR armv8_pmuv3_0/l1d_cache_refill/ [Kernel PMU event]
    l1d_cache_wb OR armv8_pmuv3_0/l1d_cache_wb/        [Kernel PMU event]
    l1d_tlb OR armv8_pmuv3_0/l1d_tlb/                  [Kernel PMU event]
    l1d_tlb_refill OR armv8_pmuv3_0/l1d_tlb_refill/    [Kernel PMU event]

So the events are list alphabetically. However, CPU core event listing is
special from commit dc098b35 ("perf list: List kernel supplied event
aliases"), in that the alias and full event is shown (in that order).
As such, the core events may become sparse.

Improve this by grouping the CPU core events and ensure that they are
listed first for kernel PMU events. For the first example, above, this
now looks like:

    duration_time                                      [Tool event]
    branch-instructions OR cpu/branch-instructions/    [Kernel PMU event]
    branch-misses OR cpu/branch-misses/                [Kernel PMU event]
    bus-cycles OR cpu/bus-cycles/                      [Kernel PMU event]
    cache-misses OR cpu/cache-misses/                  [Kernel PMU event]
    cache-references OR cpu/cache-references/          [Kernel PMU event]
    cpu-cycles OR cpu/cpu-cycles/                      [Kernel PMU event]
    cycles-ct OR cpu/cycles-ct/                        [Kernel PMU event]
    cycles-t OR cpu/cycles-t/                          [Kernel PMU event]
    el-abort OR cpu/el-abort/                          [Kernel PMU event]
    el-capacity OR cpu/el-capacity/                    [Kernel PMU event]
    el-commit OR cpu/el-commit/                        [Kernel PMU event]
    el-conflict OR cpu/el-conflict/                    [Kernel PMU event]
    el-start OR cpu/el-start/                          [Kernel PMU event]
    instructions OR cpu/instructions/                  [Kernel PMU event]
    mem-loads OR cpu/mem-loads/                        [Kernel PMU event]
    mem-stores OR cpu/mem-stores/                      [Kernel PMU event]
    ref-cycles OR cpu/ref-cycles/                      [Kernel PMU event]
    topdown-fetch-bubbles OR cpu/topdown-fetch-bubbles/ [Kernel PMU event]
    topdown-recovery-bubbles OR cpu/topdown-recovery-bubbles/ [Kernel PMU event]
    topdown-slots-issued OR cpu/topdown-slots-issued/  [Kernel PMU event]
    topdown-slots-retired OR cpu/topdown-slots-retired/ [Kernel PMU event]
    topdown-total-slots OR cpu/topdown-total-slots/    [Kernel PMU event]
    tx-abort OR cpu/tx-abort/                          [Kernel PMU event]
    tx-capacity OR cpu/tx-capacity/                    [Kernel PMU event]
    tx-commit OR cpu/tx-commit/                        [Kernel PMU event]
    tx-conflict OR cpu/tx-conflict/                    [Kernel PMU event]
    tx-start OR cpu/tx-start/                          [Kernel PMU event]
    cstate_core/c3-residency/                          [Kernel PMU event]
    cstate_core/c6-residency/                          [Kernel PMU event]
    cstate_core/c7-residency/                          [Kernel PMU event]
    cstate_pkg/c2-residency/                           [Kernel PMU event]
    cstate_pkg/c3-residency/                           [Kernel PMU event]
    cstate_pkg/c6-residency/                           [Kernel PMU event]
    cstate_pkg/c7-residency/                           [Kernel PMU event]
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1592384514-119954-3-git-send-email-john.garry@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In commit dc098b35 ("perf list: List kernel supplied event aliases"),
the aliases for events are supplied in addition to CPU event in perf list.

This relies on the name of the core PMU being "cpu", which is not the case
for arm64, so arm64 has always missed this. Use generic is_pmu_core()
helper which takes account of arm64 to make this feature work for arm64
(and possibly other archs).

Sample, before:

  armv8_pmuv3_0/br_mis_pred/          [Kernel PMU event]

after:

  br_mis_pred OR armv8_pmuv3_0/br_mis_pred/          [Kernel PMU event]
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1592384514-119954-2-git-send-email-john.garry@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adjust the handling of the session sink selection to allow no sink to be
selected on the command line. This then forwards the sink selection to
the CoreSight infrastructure which will attempt to select a sink based
on the default sink select priorities.
Signed-off-by: NMike Leach <mike.leach@linaro.org>
Tested-by: NLeo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

These are broadly useful but required to handle TMA metrics. For example
encoding Ports_Utilization from:

  https://download.01.org/perfmon/TMA_Metrics.csv

requires '<'.

  {
    "BriefDescription": "This metric estimates fraction of cycles the CPU performance was potentially limited due to Core computation issues (non divider-related).  Two distinct categories can be attributed into this metric: (1) heavy data-dependency among contiguous instructions would manifest in this metric - such cases are often referred to as low Instruction Level Parallelism (ILP). (2) Contention on some hardware execution unit other than Divider. For example; when there are too many multiply operations.",
    "MetricExpr": "( ( cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ + cpu@EXE_ACTIVITY.1_PORTS_UTIL@ + ( cpu@EXE_ACTIVITY.2_PORTS_UTIL@ * ( ( ( cpu@UOPS_RETIRED.RETIRE_SLOTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) ) / ( ( 4.000000 ) + 1.000000 ) ) ) ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) if ( cpu@ARITH.DIVIDER_ACTIVE\\,cmask\\=1@ < cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ ) else ( ( cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ + cpu@EXE_ACTIVITY.1_PORTS_UTIL@ + ( cpu@EXE_ACTIVITY.2_PORTS_UTIL@ * ( ( ( cpu@UOPS_RETIRED.RETIRE_SLOTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) ) / ( ( 4.000000 ) + 1.000000 ) ) ) ) - cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) )",
    "MetricGroup": "Topdown_Group_Ports_Utilization",
    "MetricName": "Topdown_Metric_Ports_Utilization"
  },
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200610235823.52557-2-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

d_ratio avoids division by 0 yielding infinity, such as when a counter
doesn't get scheduled. An example usage is:

  {
      "BriefDescription": "DCache L1 misses",
      "MetricExpr": "d_ratio(MEM_LOAD_RETIRED.L1_MISS, MEM_LOAD_RETIRED.L1_HIT + MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT)",
      "MetricGroup": "DCache;DCache_L1",
      "MetricName": "DCache_L1_Miss",
      "ScaleUnit": "100%",
  }
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200610235823.52557-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixups related to the introduction of libperf, where the
perf_{evsel,evlist}__ prefix is reserved for functions operating on
struct perf_{evsel,evlist}.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding new metric test for frontend metric. It's stolen from x86 pmu
events.

Committer testing:

  # perf test "Parse and process metrics"
  67: Parse and process metrics                             : Ok
  # perf test -v "Parse and process metrics"
  #
  67: Parse and process metrics                             :
  --- start ---
  test child forked, pid 104881
  metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
  found event inst_retired.any
  found event cpu_clk_unhalted.thread
  adding {inst_retired.any,cpu_clk_unhalted.thread}:W
  metric expr idq_uops_not_delivered.core / (4 * (( ( cpu_clk_unhalted.thread / 2 ) * ( 1 + cpu_clk_unhalted.one_thread_active / cpu_clk_unhalted.ref_xclk ) ))) for Frontend_Bound_SMT
  found event cpu_clk_unhalted.one_thread_active
  found event cpu_clk_unhalted.ref_xclk
  found event idq_uops_not_delivered.core
  found event cpu_clk_unhalted.thread
  adding {cpu_clk_unhalted.one_thread_active,cpu_clk_unhalted.ref_xclk,idq_uops_not_delivered.core,cpu_clk_unhalted.thread}:W
  test child finished with 0
  ---- end ----
  Parse and process metrics: Ok
  #

Had to fix it to initialize that 'struct value' array sentinel with a
named initializer to fix the build with some versions of clang:

  tests/parse-metric.c:154:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
                { 0 },
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-14-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding new test that process metrics code and checks the expected
results. Starting with easy ipc metric.

Committer testing:

  # perf test "Parse and process metrics"
  67: Parse and process metrics                             : Ok
  #
  # perf test -v "Parse and process metrics"
  67: Parse and process metrics                             :
  --- start ---
  test child forked, pid 103402
  metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
  found event inst_retired.any
  found event cpu_clk_unhalted.thread
  adding {inst_retired.any,cpu_clk_unhalted.thread}:W
  test child finished with 0
  ---- end ----
  Parse and process metrics: Ok
  #

Had to fix it to initialize that 'struct value' array sentinel with a
named initializer to fix the build with some versions of clang:

  tests/parse-metric.c:135:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers]
                { 0 },
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-13-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding test_generic_metric that prepares and runs given metric over the
data from struct runtime_stat object.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-12-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We don't release metric_events rblist, add the missing delete hook and
call the release before leaving cmd_stat.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-11-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Factoring out prepare_metric function so it can be used in test
interface coming in following changes.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-10-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add the metricgroup__parse_groups_test function. It will be used as
test's interface to metric parsing in following changes.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-9-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For testing purposes we need to pass our own map of events from
parse_groups() through metricgroup__add_metric.
Acked-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-8-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allow to pass fake_pmu in parse_groups function so it can be used in
parse_events call.

It's will be passed by the upcoming metricgroup__parse_groups_test
function.

Committer notes:

Made it a 'struct perf_pmu' pointer, in line with the changes at the
start of this patchkit to avoid statics deep down in library code.
Acked-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-6-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Factor out the parse_groups function, it will be used for new test
interface coming in following changes.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-6-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The test goes through all metrics compiled for arch within pmu events
and try to parse them.

This test is different from 'test_parsing' in that we go through all the
events in the current arch, not just one defined for current CPU model.
Using 'fake_pmu' to parse events which do not have PMUs defined in the
system.

Say there's bad change in ivybridge metrics file, like:

  - a/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json
  + b/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json
  @@ -8,7 +8,7 @@
  -        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ((
  +        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / / (4 *

the test fails with (on my kabylake laptop):

  $ perf test 'Parsing of PMU event table metrics with fake PMUs' -v
  parsing 'idq_uops_not_delivered.core / / (4 * (( ( cpu_clk_unh...
  syntax error, line 1
  expr__parse failed
  test child finished with -1
  ...

The test also defines its own list of metrics and tries to parse them.
It's handy for developing.

Committer notes:

Testing it:

  $ perf test fake
  10: PMU events                                            :
  10.4: Parsing of PMU event table metrics with fake PMUs   : FAILED!
  $ perf test -v fake |& tail
  parsing '(unc_p_freq_trans_cycles / unc_p_clockticks) * 100.'
  parsing '(unc_m_power_channel_ppd / unc_m_clockticks) * 100.'
  parsing '(unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.'
  parsing '(unc_m_power_self_refresh / unc_m_clockticks) * 100.'
  parsing 'idq_uops_not_delivered.core / * (4 * cycles)'
  syntax error
  expr__parse failed
  test child finished with -1
  ---- end ----
  PMU events subtest 4: FAILED!
  $

And fix this error:

  tests/pmu-events.c:437:40: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers]
        struct parse_events_error error = { 0 };
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-5-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When wanting to use the support in __parse_events() for fake pmus, just
pass it.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is an alternative patch to what Jiri sent that instead of changing
all callers to parse_events() for allowing to pass a fake_pmu, provide
another function specifically for that.

From Jiri's patch:

This way it's possible to parse events from PMUs which are not present
in the system. It's available only for testing purposes coming in
following changes, so all the current users set fake_pmu argument as
false.
Based-on-a-patch-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-3-jolsa@kernel.orgAcked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Separating the generic part of check_parse_id function,
so it can be used in following changes for the new test.

Committer notes:

Fix this error:

  tests/pmu-events.c:413:40: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers]
        struct parse_events_error error = { 0 };
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-4-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a way to create a pmu event without the actual PMU being in place.

This way we can test metrics defined for any processor.

The interface is to define fake_pmu in struct parse_events_state data.
It will be used only in tests via special interface function added in
following changes.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602214741.1218986-2-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The '>' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:

  tools/perf/ui/browsers/annotate.c:212:30-35: WARNING: conversion to bool
  not needed here
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200420123528.11655-1-yanaijie@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On some platforms the default encoding is not utf-8, which causes an
UnicodeDecodeError when reading the flamegraph template and writing the
flamegraph
Signed-off-by: NAndreas Gerstmayr <agerstmayr@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200619153232.203537-1-agerstmayr@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When build perf with ASan or UBSan, if libasan or libubsan can not find,
the feature-glibc is 0 and there exists the following error log which is
wrong, because we can find gnu/libc-version.h in /usr/include,
glibc-devel is also installed.

  [yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address'
    BUILD:   Doing 'make -j4' parallel build
    HOSTCC   fixdep.o
    HOSTLD   fixdep-in.o
    LINK     fixdep
  <stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target
  <stdin>:1:0: warning: -fsanitize=address not supported for this target

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libcap: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]
  ...                        libaio: [ OFF ]
  ...                       libzstd: [ OFF ]
  ...        disassembler-four-args: [ OFF ]

  Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el].  Stop.
  Makefile.perf:224: recipe for target 'sub-make' failed
  make[1]: *** [sub-make] Error 2
  Makefile:69: recipe for target 'all' failed
  make: *** [all] Error 2
  [yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h
  /usr/include/gnu/libc-version.h

After install libasan and libubsan, the feature-glibc is 1 and the build
process is success, so the cause is related with libasan or libubsan, we
should check them and print an error log to reflect the reality.

Committer testing:

  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
  $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j12' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libcap: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]
  ...                        libaio: [ OFF ]
  ...                       libzstd: [ OFF ]
  ...        disassembler-four-args: [ OFF ]

  Makefile.config:401: *** No libasan found, please install libasan.  Stop.
  make[1]: *** [Makefile.perf:231: sub-make] Error 2
  make: *** [Makefile:70: all] Error 2
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $
  $
  $ sudo dnf install libasan
  <SNIP>
  Installed:
    libasan-9.3.1-2.fc31.x86_64
  $
  $
  $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j12' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libcap: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...        numa_num_possible_cpus: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                     libcrypto: [ on  ]
  ...                     libunwind: [ on  ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ on  ]
  ...                     get_cpuid: [ on  ]
  ...                           bpf: [ on  ]
  ...                        libaio: [ on  ]
  ...                       libzstd: [ on  ]
  ...        disassembler-four-args: [ on  ]
   <SNIP>
    CC       /tmp/build/perf/util/pmu-flex.o
    FLEX     /tmp/build/perf/util/expr-flex.c
    CC       /tmp/build/perf/util/expr-bison.o
    CC       /tmp/build/perf/util/expr.o
    CC       /tmp/build/perf/util/expr-flex.o
    CC       /tmp/build/perf/util/parse-events-flex.o
    CC       /tmp/build/perf/util/parse-events.o
    LD       /tmp/build/perf/util/intel-pt-decoder/perf-in.o
    LD       /tmp/build/perf/util/perf-in.o
    LD       /tmp/build/perf/perf-in.o
    LINK     /tmp/build/perf/perf
  <SNIP>
    INSTALL  python-scripts
    INSTALL  perf_completion-script
    INSTALL  perf-tip
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $ ldd ~/bin/perf | grep asan
  	libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000)
  $

And if we rebuild without -fsanitize-address:

  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
  $ make O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j12' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libcap: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...        numa_num_possible_cpus: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                     libcrypto: [ on  ]
  ...                     libunwind: [ on  ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ on  ]
  ...                     get_cpuid: [ on  ]
  ...                           bpf: [ on  ]
  ...                        libaio: [ on  ]
  ...                       libzstd: [ on  ]
  ...        disassembler-four-args: [ on  ]

    GEN      /tmp/build/perf/common-cmds.h
    CC       /tmp/build/perf/exec-cmd.o
  <SNIP>
    INSTALL  perf_completion-script
    INSTALL  perf-tip
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $ ldd ~/bin/perf | grep asan
  $
Signed-off-by: NTiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tiezhu yang <yangtiezhu@loongson.cn>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixes segmentation fault when trying to interpret zstd-compressed data
with perf script:

```
  $ perf record -z ls
  ...
  [ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ]
  $ memcheck perf script
  ...
  ==67911== Invalid read of size 4
  ==67911==    at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5)
  ==67911==    by 0x6E726B: zstd_decompress_stream (zstd.c:100)
  ==67911==    by 0x65729C: perf_session__process_compressed_event (session.c:72)
  ==67911==    by 0x6598E8: perf_session__process_user_event (session.c:1583)
  ==67911==    by 0x65BA59: reader__process_events (session.c:2177)
  ==67911==    by 0x65BA59: __perf_session__process_events (session.c:2234)
  ==67911==    by 0x65BA59: perf_session__process_events (session.c:2267)
  ==67911==    by 0x5A7397: __cmd_script (builtin-script.c:2447)
  ==67911==    by 0x5A7397: cmd_script (builtin-script.c:3840)
  ==67911==    by 0x5FE9D2: run_builtin (perf.c:312)
  ==67911==    by 0x711627: handle_internal_command (perf.c:364)
  ==67911==    by 0x711627: run_argv (perf.c:408)
  ==67911==    by 0x711627: main (perf.c:538)
  ==67911==  Address 0x71d8 is not stack'd, malloc'd or (recently) free'd
```
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Acked-by: NAlexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20200612230333.72140-1-milian.wolff@kdab.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This avoids multiple declarations if the flex header is included.
Signed-off-by: NIan Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200609234344.3795-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixes: a26e4716 (perf tools: Move ALLOC_LIST into a function)
Signed-off-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200609053610.206588-2-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Arrays are pointer types and don't need their address taking.

Fixes: 8255718f (perf pmu: Expand PMU events by prefix match)
Signed-off-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200609053610.206588-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Issue:

bpf_probe_read() is no longer available for architecture which has
overlapping address space. Hence bpf prologue generation fails

Fix:

Use bpf_probe_read_kernel for kernel member access. For user attribute
access in kprobes, use bpf_probe_read_user.

Other:

@user attribute was introduced in commit 1e032f7c ("perf-probe: Add
user memory access attribute support")

Test:

1. ulimit -l 128 ; ./perf record -e tests/bpf_sched_setscheduler.c
2. cat tests/bpf_sched_setscheduler.c

static void (*bpf_trace_printk)(const char *fmt, int fmt_size, ...) =
        (void *) 6;
static int (*bpf_probe_read_user)(void *dst, __u32 size,
                                  const void *unsafe_ptr) = (void *) 112;
static int (*bpf_probe_read_kernel)(void *dst, __u32 size,
        const void *unsafe_ptr) = (void *) 113;

SEC("func=do_sched_setscheduler  pid policy param->sched_priority@user")
int bpf_func__setscheduler(void *ctx, int err, pid_t pid, int policy,
                           int param)
{
        char fmt[] = "prio: %ld";
        bpf_trace_printk(fmt, sizeof(fmt), param);
        return 1;
}

char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;

3. ./perf script
   sched 305669 [000] 1614458.838675: perf_bpf_probe:func: (2904e508)
   pid=261614 policy=2 sched_priority=1

4. cat /sys/kernel/debug/tracing/trace
   <...>-309956 [006] .... 1616098.093957: 0: prio: 1

Committer testing:

I had to add some missing headers in the bpf_sched_setscheduler.c test
proggie, then instead of using record+script I used 'perf trace' to
drive everything in one go:

  # cat bpf_sched_setscheduler.c
  #include <linux/types.h>
  #include <bpf.h>

  static void (*bpf_trace_printk)(const char *fmt, int fmt_size, ...) = (void *) 6;
  static int (*bpf_probe_read_user)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 112;
  static int (*bpf_probe_read_kernel)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 113;

  SEC("func=do_sched_setscheduler  pid policy param->sched_priority@user")
  int bpf_func__setscheduler(void *ctx, int err, pid_t pid, int policy, int param)
  {
          char fmt[] = "prio: %ld";
          bpf_trace_printk(fmt, sizeof(fmt), param);
          return 1;
  }

  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  #
  #
  # perf trace -e bpf_sched_setscheduler.c chrt -f 42 sleep 1
     0.000 chrt/80125 perf_bpf_probe:func(__probe_ip: -1676607808, policy: 1, sched_priority: 42)
  #

And even with backtraces :-)

  # perf trace -e bpf_sched_setscheduler.c/max-stack=8/ chrt -f 42 sleep 1
       0.000 chrt/79805 perf_bpf_probe:func(__probe_ip: -1676607808, policy: 1, sched_priority: 42)
                                         do_sched_setscheduler ([kernel.kallsyms])
                                         __x64_sys_sched_setscheduler ([kernel.kallsyms])
                                         do_syscall_64 ([kernel.kallsyms])
                                         entry_SYSCALL_64 ([kernel.kallsyms])
                                         __GI___sched_setscheduler (/usr/lib64/libc-2.30.so)
  #
Signed-off-by: NSumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: NThomas Richter <tmricht@linux.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: bpf@vger.kernel.org
LPU-Reference: 20200609081019.60234-3-sumanthk@linux.ibm.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Issue:

  # perf probe -a 'do_sched_setscheduler pid policy param->sched_priority@user'

did not work before.

Fix:

Make:

  # perf probe -a 'do_sched_setscheduler pid policy param->sched_priority@user'

output equivalent to ftrace:

  # echo 'p:probe/do_sched_setscheduler _text+517384 pid=%r2:s32 policy=%r3:s32 sched_priority=+u0(%r4):s32' > /sys/kernel/debug/tracing/kprobe_events

Other:

1. Right now, __match_glob() does not handle [u]<offset>. For now, use
  *u]<offset>.

2. @user attribute was introduced in commit 1e032f7c ("perf-probe:
   Add user memory access attribute support")

Test:
1. perf probe -a 'do_sched_setscheduler  pid policy
   param->sched_priority@user'

2 ./perf script
   sched 305669 [000] 1614458.838675: perf_bpf_probe:func: (2904e508)
   pid=261614 policy=2 sched_priority=1

3. cat /sys/kernel/debug/tracing/trace
   <...>-309956 [006] .... 1616098.093957: 0: prio: 1

Committer testing:

Before:

  # perf probe -a 'do_sched_setscheduler pid policy param->sched_priority@user'
  param(type:sched_param) has no member sched_priority@user.
    Error: Failed to add events.
  # pahole sched_param
  struct sched_param {
  	int                        sched_priority;       /*     0     4 */

  	/* size: 4, cachelines: 1, members: 1 */
  	/* last cacheline: 4 bytes */
  };
  #

After:

  # perf probe -a 'do_sched_setscheduler pid policy param->sched_priority@user'
  Added new event:
    probe:do_sched_setscheduler (on do_sched_setscheduler with pid policy sched_priority=param->sched_priority)

  You can now use it in all perf tools, such as:

  	perf record -e probe:do_sched_setscheduler -aR sleep 1

  # cat /sys/kernel/debug/tracing/kprobe_events
  p:probe/do_sched_setscheduler _text+1113792 pid=%di:s32 policy=%si:s32 sched_priority=+u0(%dx):s32
  #

Fixes: 1e032f7c ("perf-probe: Add user memory access attribute support")
Signed-off-by: NSumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: NThomas Richter <tmricht@linux.ibm.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: bpf@vger.kernel.org
LPU-Reference: 20200609081019.60234-2-sumanthk@linux.ibm.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If config->aggr_map is NULL and config->aggr_get_id is not NULL,
the function print_aggr() will still calling arrg_update_shadow(),
which can result in accessing the invalid pointer.

Fixes: 088519f3 ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: NHongbo Yao <yaohongbo@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/lkml/20200608163625.GC3073@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'evname' variable can be NULL, as it is checked a few lines back,
check it before using.

Fixes: 9e207ddf ("perf report: Show call graph from reference events")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/Signed-off-by: NGaurav Singh <gaurav1086@gmail.com>

Introduced in:

  fa2fcf4f ("statx: add mount ID")

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Update the copies of files affected by:

  c8ffd8bc ("vfs: add faccessat2 syscall")

To address this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fcntl.h' differs from latest version at 'include/uapi/linux/fcntl.h'
  diff -u tools/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
  diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl

Which results in 'perf trace' gaining support for the 'faccessat2'
syscall, now one can use:

  # perf trace -e faccessat2

And have system wide tracing of this syscall. And this also will include
it;

  # perf trace -e faccess*

Together with the other variants.

How it affects building/usage (on an x86_64 system):

  $ cp /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp/syscalls_64.c.before
  $
  [root@five ~]# perf trace -e faccessat2
  event syntax error: 'faccessat2'
                       \___ parser error
  Run 'perf list' for a list of valid events

   Usage: perf trace [<options>] [<command>]
      or: perf trace [<options>] -- <command> [<options>]
      or: perf trace record [<options>] [<command>]
      or: perf trace record [<options>] -- <command> [<options>]

      -e, --event <event>   event/syscall selector. use 'perf list' to list available events
  [root@five ~]#
  $ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
  $ git diff
  diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
  index 37b844f839bc..78847b32e137 100644
  --- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
  +++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
  @@ -359,6 +359,7 @@
   435    common  clone3                  sys_clone3
   437    common  openat2                 sys_openat2
   438    common  pidfd_getfd             sys_pidfd_getfd
  +439    common  faccessat2              sys_faccessat2

   #
   # x32-specific system call numbers start at 512 to avoid cache impact
  $

  $ make -C tools/perf O=/tmp/build/perf/ install-bin
  <SNIP>
  CC       /tmp/build/perf/util/syscalltbl.o
  LD       /tmp/build/perf/util/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/perf
  <SNIP>
  [root@five ~]# perf trace -e faccessat2
  ^C[root@five ~]#

Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There exists some duplicated includes in tools/perf, remove them.
Signed-off-by: NTiezhu Yang <yangtiezhu@loongson.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1591071304-19338-2-git-send-email-yangtiezhu@loongson.cnSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adjust 'map->pgoff' also when moving a map's start address.

Example with v5.4.34 based kernel:

  Before:

    $ sudo tools/perf/perf record -a --kcore -e intel_pt//k sleep 1
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 1.958 MB perf.data ]
    $ sudo tools/perf/perf script --itrace=e >/dev/null
    Warning:
    961 instruction trace errors

  After:

    $ sudo tools/perf/perf script --itrace=e >/dev/null
    $

Committer testing:

  # uname -a
  Linux seventh 5.6.10-100.fc30.x86_64 #1 SMP Mon May 4 15:36:44 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
  #

Before:

  # perf record -a --kcore -e intel_pt//k sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.923 MB perf.data ]
  # perf script --itrace=e >/dev/null
  Warning:
  295 instruction trace errors
  #

After:

  # perf record -a --kcore -e intel_pt//k sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.919 MB perf.data ]
  # perf script --itrace=e >/dev/null
  #

Fixes: fb5a88d4 ("perf tools: Preserve eBPF maps when loading kcore")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200602112505.1406-1-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Jin Yao reported the issue (and posted first versions of this change)
with groups being defined over events with different cpu mask.

This causes assert aborts in get_group_fd, like:

  # perf stat -M "C2_Pkg_Residency" -a -- sleep 1
  perf: util/evsel.c:1464: get_group_fd: Assertion `!(fd == -1)' failed.
  Aborted

All the events in the group have to be defined over the same cpus so the
group_fd can be found for every leader/member pair.

Adding check to ensure this condition is met and removing the group
(with warning) if we detect mixed cpus, like:

  $ sudo perf stat -e '{power/energy-cores/,cycles},{instructions,power/energy-cores/}'
  WARNING: event cpu maps do not match, disabling group:
    anon group { power/energy-cores/, cycles }
    anon group { instructions, power/energy-cores/ }

Ian asked also for cpu maps details, it's displayed in verbose mode:

  $ sudo perf stat -e '{cycles,power/energy-cores/}' -v
  WARNING: group events cpu maps do not match, disabling group:
    anon group { power/energy-cores/, cycles }
       power/energy-cores/: 0
       cycles: 0-7
    anon group { instructions, power/energy-cores/ }
       instructions: 0-7
       power/energy-cores/: 0

Committer testing:

  [root@seventh ~]# perf stat -e '{power/energy-cores/,cycles},{instructions,power/energy-cores/}'
  WARNING: grouped events cpus do not match, disabling group:
    anon group { power/energy-cores/, cycles }
    anon group { instructions, power/energy-cores/ }
  ^C
   Performance counter stats for 'system wide':

               12.62 Joules power/energy-cores/
         106,920,637        cycles
          80,228,899        instructions              #    0.75  insn per cycle
               12.62 Joules power/energy-cores/

        14.514476987 seconds time elapsed

  [root@seventh ~]#

But if we put compatible events in each group it works:

  [root@seventh ~]# perf stat -e '{power/energy-cores/,power/energy-ram/},{instructions,cycles}' -a sleep 2

   Performance counter stats for 'system wide':

                1.95 Joules power/energy-cores/
                0.92 Joules power/energy-ram/
          29,305,715        instructions              #    1.03  insn per cycle
          28,423,338        cycles

         2.001438142 seconds time elapsed

  [root@seventh ~]#

This needs improvement tho:

  [root@seventh ~]# perf stat -e '{power/energy-cores/,power/energy-ram/},{instructions,cycles}' sleep 2
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (power/energy-cores/).
  /bin/dmesg | grep -i perf may provide additional information.

  [root@seventh ~]#

We need to emit a better message, one stating that the power/ events
can't be used for a specific workload, instead it is per-cpu or system
wide.

Fixes: 6a4bb04c ("perf tools: Enable grouping logic for parsed events")
Co-developed-by: NJin Yao <yao.jin@linux.intel.com>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIan Rogers <irogers@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602101736.GE1112120@kravaSigned-off-by: NJin Yao <yao.jin@linux.intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is currently working due to extra include paths in the build.

Before:

  $ cd tools/perf/arch/arm64/util
  $ ls -la ../../util/unwind-libdw.h
  ls: cannot access '../../util/unwind-libdw.h': No such file or directory

After:

  $ ls -la ../../../util/unwind-libdw.h
  -rw-r----- 1 irogers irogers 553 Apr 17 14:31 ../../../util/unwind-libdw.h
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200529225232.207532-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>