- 28 5月, 2008 1 次提交
-
-
由 Kenji Kaneshige 提交于
Some (broken?) platform assign the same slot name to multiple hotplug slots. On such system, slot initialization would fail because of name collision. The shpchp driver already have a "slot_with_bus" module option which adds the bus number into the slot name. This patch adds the message about this module option that will be displayed when slot name collision is detected. Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 22 5月, 2008 1 次提交
-
-
由 Shaohua Li 提交于
The Slot 03:00.* of JMicron controller has two functions, but one is PCIE endpoint the other isn't PCIE device, very strange. PCIE spec defines all functions should have the same config for ASPM, so disable ASPM for the whole slot in this case. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 20 5月, 2008 2 次提交
-
-
由 Jesse Barnes 提交于
Forgot to update the PCI error handling address with the new @vger one. Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Tony Camuso 提交于
Replace Redundant Whitelist Entries with the Correct Ones The ProLiant DL585 G2 and the DL585 G2 are entered reundantly in the dmi_system_id table. What should have been there are the DL360 and DL380. This patch simply replaces the redundant entries with the correct entries. Signed-off-by: NTony Camuso <tony.camuso@hp.com> Signed-off-by: NPat Schoeller <patrick.schoeller@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 16 5月, 2008 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] macintosh: Replace deprecated __initcall with device_initcall [POWERPC] cell: Fix section mismatches in io-workarounds code [POWERPC] spufs: Fix compile error [POWERPC] Fix uninitialized variable bug in copy_{to|from}_user [POWERPC] Add null pointer check to of_find_property [POWERPC] vmemmap fixes to use smaller pages [POWERPC] spufs: Fix pointer reference in find_victim [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting [POWERPC] 85xx: Fix some sparse warnings for 85xx MDS [POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board. [POWERPC] 86xx: mpc8610_hpcd: fix second serial port [POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes [POWERPC] 85xx: Add 8568 PHY workarounds to board code [POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: update transaction t_state to T_COMMIT fix ext4: Retry block allocation if new blocks are allocated from system zone. ext4: mballoc fix mb_normalize_request algorithm for 1KB block size filesystems ext4: fix typos in messages and comments (journalled -> journaled) ext4: fix synchronization of quota files in journal=data mode ext4: Fix mount messages when quota disabled ext4: correct mount option parsing to detect when quota options can be changed
-
由 Cyrill Gorcunov 提交于
This patch fixes a build bug on m68k - gcc decides to emit a call to the strlen library function, which we don't implement. More importantly - my previous patch "init: don't lose initcall return values" (commit e662e1cf) had introduced potential buffer overflow by wrong calculation of string accumulator size. Use strlcat() instead, fixing both bugs. Many thanks Andreas Schwab and Geert Uytterhoeven for helping to catch and fix the bug. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
One function to just loop over the entries, one function to actually do the call and the associated debugging code. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Everybody wants to pass it a function pointer, and in fact, that is what you _must_ pass it for it to make sense (since it knows that ia64 and ppc64 use descriptors for function pointers and fetches the actual address from there). So don't make the argument be a 'unsigned long' and force everybody to add a cast. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix personality(PER_LINUX32) performance issue [IA64] Properly unregister legacy interrupts [IA64] Remove NULL pointer check for argument never passed as NULL. [IA64] trivial cleanup for perfmon.c [IA64] trivial cleanup for entry.S [IA64] fix interrupt masking for pending works on kernel leave [IA64] allow user to force_pal_cache_flush [IA64] Don't reserve crashkernel memory > 4 GB [IA64] machvec support for SGI UV platform [IA64] Add header files for SGI UV platform
-
由 Mingming Cao 提交于
Updating the current transaction's t_state is protected by j_state_lock. We need to do the same when updating the t_state to T_COMMIT. Acked-by: NJan Kara <jack@suse.cz> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
If the block allocator gets blocks out of system zone ext4 calls ext4_error. But if the file system is mounted with errors=continue retry block allocation. We need to mark the system zone blocks as in use to make sure retry don't pick them again System zone is the block range mapping block bitmap, inode bitmap and inode table. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Ingo Molnar 提交于
Enabling the BKL to be lockdep tracked uncovered the following upstream kernel bug in the tty code, which caused a BKL reference leak: ================================================ [ BUG: lock held when returning to user space! ] ------------------------------------------------ dmesg/3121 is leaving the kernel with locks still held! 1 lock held by dmesg/3121: #0: (kernel_mutex){--..}, at: [<c02f34d9>] opost+0x24/0x194 this might explain some of the atomicity warnings and crashes that -tip tree testing has been experiencing since the BKL was converted back to a spinlock. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang, Xiaolan 提交于
The patch aims to fix a performance issue for the syscall personality(PER_LINUX32). On IA-64 box, the syscall personality (PER_LINUX32) has poor performance because it failed to find the Linux/x86 execution domain. Then it tried to load the kernel module however it failed always and it used the default execution domain PER_LINUX instead. Requesting kernel modules is very expensive. It caused the performance issue. (see the function lookup_exec_domain in kernel/exec_domain.c). To resolve the issue, execution domain Linux/x86 is always registered in initialization time for IA-64 architecture. Signed-off-by: NXiaolan Huang <xiaolan.huang@intel.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] show_interrupts: prevent cpu hotplug when walking cpu_online_map. [S390] smp: __smp_call_function_map vs cpu_online_map fix. [S390] tape: Use ccw_dev_id to build cdev_id. [S390] dasd: fix timeout handling in interrupt handler [S390] s390dbf: Use const char * for dbf name. [S390] dasd: Use const in busid functions. [S390] blacklist.c: removed duplicated include [S390] vmlogrdr: module initialization function should return negative errors [S390] sparsemem vmemmap: initialize memmap. [S390] Remove last traces of cio_msg=. [S390] cio: Remove CCW_CMD_SUSPEND_RECONN in front of CCW_CMD_SET_PGID.
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: arch/parisc/kernel/perf_asm.S: build fix parisc: remove -traditional from assembler flags parisc: use conditional macro for 64-bit wide ops parisc: Remove ioctl.h content picked up from <asm-generic/ioctl.h>. arch/parisc/kernel/unaligned.c: use time_* macros parisc: remove redundant display of free swap space in show_mem() drivers/parisc: replace remaining __FUNCTION__ occurrences parisc: replace remaining __FUNCTION__ occurrences parisc: new termios definitions parisc: fix trivial section name warnings
-
- 15 5月, 2008 24 次提交
-
-
由 Kyle McMartin 提交于
Missing <linux/init.h> header for __HEAD macro. Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
This work enables us to remove -traditional from $AFLAGS on parisc. Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Robert P. J. Day 提交于
Now that <asm-generic/ioctl.h> allows overriding of the most commonly changed macro values, take advantage of that. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Heiko Carstens 提交于
Surround all the code withing show_interrupts() with get/put_online_cpus() to prevent strange results wrt cpu hotplug. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Both smp_call_function() and __smp_call_function_map() access cpu_online_map. Both functions run with preemption disabled which protects for cpus going offline. However new cpus can be added and therefore the cpu_online_map can change unexpectedly. So use the call_lock to protect against changes to the cpu_online_map in start_secondary() and all smp_call_* functions. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
To construct the integer containing the information from the bus_id, it is easier to use the data from ccw_dev_id than to parse the bus_id. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Weinhuber 提交于
When the dasd_int_handler is called with an error code instead of an irb, the associated request should be restarted. This handling was missing from the -ETIMEDOUT case. In fact it should be done in any case. Signed-off-by: NStefan Weinhuber <wein@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
We should use const char * for passing the name of the debug feature around since it will not be changed. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
We should use 'const char *' in the busid functions since the strings are not modified anyway. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Huang Weiyi 提交于
Removed duplicated include <asm/cio.h> in drivers/s390/cio/blacklist.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Marcin Slusarz 提交于
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Let's just use the generic vmmemmap_alloc_block() function which always returns initialized memory. Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
cio_msg= is gone, also remove it from kernel-parameters.txt. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Ernst 提交于
CCW_CMD_SUSPEND_RECONN causes a system hang if the cable of a reserved DASD is disconnected and connected again. Signed-off-by: NMichael Ernst <mernst@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 S.Caglar Onur 提交于
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. So use the time_after() macro, defined in linux/jiffies.h, which deals with wrapping correctl [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NS.Caglar Onur <caglar@pardus.org.tr> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Johannes Weiner 提交于
show_mem() has no need to print the amount of free swap space manually because show_free_areas() does this already and is called by the former. The two outputs only differ in text formatting: printk("Free swap = %lukB\n", ...); printk("Free swap: %6ldkB\n", ...); Signed-off-by: NJohannes Weiner <hannes@saeurebad.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Helge Deller 提交于
This trivial patch fixes the following section warnings on PARISC: > WARNING: vmlinux.o (.text.1): unexpected section name. >The (.[number]+) following section name are ld generated and not expected. > Did you forget to use "ax"/"aw" in a .S file? > Note that for example <linux/init.h> contains > section definitions for use in .S files. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ishizaki Kou 提交于
Fix following warnings: WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0x9c): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.iowa_register_bus() WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0xa4): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.io_workaround_init() Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 FUJITA Tomonori 提交于
With CONFIG_VIRT_CPU_ACCOUNTING disabled, I got the following error: linux-2.6/arch/powerpc/platforms/cell/spufs/file.c: In function 'spu_switch_log_notify': linux-2.6/arch/powerpc/platforms/cell/spufs/file.c:2542: error: implicit declaration of function 'get_tb' make[4]: *** [arch/powerpc/platforms/cell/spufs/file.o] Error 1 Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-