Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This avoids races with the APIC broadcast/mask modes.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently just defined to their non range parts.

Pointed out by John Linville
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Report PXMs instead of nodes
- Report the correct PXM, not always the one of node 1.
- Only warn for the case of a PXM overlapping by itself
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

They were previously static.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

They should be identical in the kernel now, but this
makes it consistent with other code.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Nick points out it never worked because PageReserved was
set and it might cause problems later on. Also HOTPLUG_CPU
is much more common now so let's care not too much
about the !hotplug case.

Cc: nickpiggin@yahoo.com.au
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Noted by Ashok Raj
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Needed for some newer Opteron systems with E stepping and memory
relocation enabled. The node addresses are different in lower
bits now so the nodemap hash function needs to be enlarged.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When I gave proposed the fix to pfn_valid() for RHEL4, Stephen Tweedie's
sharp eyes caught this:
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As noted by matz@suse.de

The problem is, that on i386 the syscallN
macro is defined like so:

  long __res; \
  __asm__ volatile ("int $0x80" \
        : "=a" (__res) \
        : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
          "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5))); \

If one of the arguments (in the _llseek syscall it's the arg4) is a pointer
which the syscall is expected to write to (to the memory pointed to by this
ptr), then this side-effect is not captured in the asm.

If anyone uses this macro to define it's own version of the syscall
(sometimes necessary when not using glibc) and it's inlined, then GCC
doesn't know that this asm write to "*dest", when called like so for instance:

  out = 1;
  llseek (fd, bla, blubb, &out, trara)
  use (out);

Here nobody tells GCC that "out" actually is written to (just a pointer to it
is passed to the asm).  Hence GCC might (and in the above bug did)
copy-propagate "1" into the second use of "out".

The easiest solution would be to add a "memory" clobber to the definition
of this syscall macro.  As this is a syscall, it shouldn't inhibit too many
optimizations.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Add KERN_INFO to printks (from i386)
- Use longs instead of ints to accumulate pages.
- Fix broken indenting.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It only offers extremly dubious security advantages and
is not worth the overhead in this critical path.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

(from i386)
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The global bit  was not set in the first 2MB page, instead
it had a bit in the free AVL section which is useless.
Fixed thus.

Noticed by Eric Biederman

Cc:  Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

x86_64 idle=poll might be a little less responsive than it should: unlike
mwait_idle, and unlike i386, its poll_idle left TIF_POLLING_NRFLAG set.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Saves some memory except for hotplug situations.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The generic TLB flush functions kept upto 506 pages per
CPU to avoid too frequent IPIs.

This value was done for the L1 cache of older x86 CPUs,
but with modern CPUs it does not make much sense anymore.
TLB flushing is slow enough that using the L2 cache is fine.

This patch increases the flush array on x86-64 to cache
5350 pages. That is roughly 20MB with 4K pages. It speeds
up large munmaps in multithreaded processes on SMP considerably.

The cost is roughly 42k of memory per CPU, which is reasonable.

I only increased it on x86-64 for now, but it would probably
make sense to increase it everywhere. Embedded architectures
with SMP may keep it smaller to save some memory per CPU.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

asm-x86-64/timex.h does not reference CONFIG constants.
Do not need to include config.h.
Signed-off-by: NGrant Grundler <iod00d@hp.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Remove unused irqrsp field
- Remove pda->me
- Optimize set_softirq_pending slightly
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds console and earlyprintk support for a host file
on AMD's SimNow simulator.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Instead of using a global spinlock to protect the state
of the remote TLB flush use a lock and state for each sending CPU.

To tell the receiver where to look for the state use 8 different
call vectors.  Each CPU uses a specific vector to trigger flushes on other
CPUs. Depending on the received vector the target CPUs look into
the right per cpu variable for the flush data.

When the system has more than 8 CPUs they are hashed to the 8 available
vectors. The limited global vector space forces us to this right now.
In future when interrupts are split into per CPU domains this could be
fixed, at the cost of needing more IPIs in flat mode.

Also some minor cleanup in the smp flush code and remove some outdated
debug code.

Requires patch to move cpu_possible_map setup earlier.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If we use 64bit kernel on ia64/x86_64/s390 architecture, and we run
32bit binary on 32bit compatibility mode, sendfile system call seems be
not set offset argument.

This is because sendfile's return value is not zero but the code regards
the result by return value is zero or not.

This problem will be affect to ia64/x86_64/s390 and not affect to other
architecture does not affect other architecture (mips/parisc/ppc64/sparc64).
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Include build number in oops output

Helps me to match oopses to correct kernel.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since this is shared code I had to implement it for i386 too
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The resume code uses CPU hotplug now so at resume time
we only ever see one CPU.

Pointed out by Yu Luming.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The FLATMEM people added it, but there doesn't seem a good reason
because end_pfn is identical.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoids a very dumb loop
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use pcibus_to_node directly
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It could be wrong for kexec or other cases. Read it from
the CPU instead.
Signed-off-by: NMurali <muralim@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

One machine is constantly throwing NMI watchdog timeouts in mce_log

This was one attempt to fix it.

(AK: this doesn't actually fix the bug I'm seeing unfortunately, probably
drop.  I don't like it that the reader can spin forever now waiting
for a writer)
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's already handled in the main swiotlb code.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

No-one needs it then
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This leads to bootmem allocating first from node 0 instead
of from the last node.  This avoids swiotlb allocating on the last node, which
doesn't really work on a machine with >4GB.

Note: there is a better patch around from someone else that gets
rid of the pgdat list completely.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PCI_DMA_BUS_IS_PHYS has to be zero even when the GART IOMMU is disabled
and the swiotlb is used. Otherwise the block layer does unnecessary
double bouncing.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Originally from Stuart Hayes.

When setting up the APIC for the Uniprocessor kernel don't
assume the CPU has an APIC ID of zero.

This fixes boot with the UP kernel on Dell PowerEdge 6800/6850 4way systems.

Cc: Stuart.Hayes@dell.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>