Add a secmark field to the skbuff structure, to allow security subsystems to
place security markings on network packets.  This is similar to the nfmark
field, except is intended for implementing security policy, rather than than
networking policy.

This patch was already acked in principle by Dave Miller.
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add some sanity checking.  truesize should be at least sizeof(struct
sk_buff) plus the current packet length.  If not, then truesize is
seriously mangled and deserves a kernel log message.

Currently we'll do the check for release of stream socket buffers.

But we can add checks to more spots over time.

Incorporating ideas from Herbert Xu.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement /proc/slab_allocators.   It produces output like:

idr_layer_cache: 80 idr_pre_get+0x33/0x4e
buffer_head: 2555 alloc_buffer_head+0x20/0x75
mm_struct: 9 mm_alloc+0x1e/0x42
mm_struct: 20 dup_mm+0x36/0x370
vm_area_struct: 384 dup_mm+0x18f/0x370
vm_area_struct: 151 do_mmap_pgoff+0x2e0/0x7c3
vm_area_struct: 1 split_vma+0x5a/0x10e
vm_area_struct: 11 do_brk+0x206/0x2e2
vm_area_struct: 2 copy_vma+0xda/0x142
vm_area_struct: 9 setup_arg_pages+0x99/0x214
fs_cache: 8 copy_fs_struct+0x21/0x133
fs_cache: 29 copy_process+0xf38/0x10e3
files_cache: 30 alloc_files+0x1b/0xcf
signal_cache: 81 copy_process+0xbaa/0x10e3
sighand_cache: 77 copy_process+0xe65/0x10e3
sighand_cache: 1 de_thread+0x4d/0x5f8
anon_vma: 241 anon_vma_prepare+0xd9/0xf3
size-2048: 1 add_sect_attrs+0x5f/0x145
size-2048: 2 journal_init_revoke+0x99/0x302
size-2048: 2 journal_init_revoke+0x137/0x302
size-2048: 2 journal_init_inode+0xf9/0x1c4

Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Alexander Nyberg <alexn@telia.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
DESC
slab-leaks3-locking-fix
EDESC
From: Andrew Morton <akpm@osdl.org>

Update for slab-remove-cachep-spinlock.patch

Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Alexander Nyberg <alexn@telia.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

*** Warning: "skb_pull_rcsum" [net/bridge/bridge.ko] undefined!
*** Warning: "skb_pull_rcsum" [net/8021q/8021q.ko] undefined!
*** Warning: "skb_pull_rcsum" [drivers/net/pppoe.ko] undefined!
*** Warning: "skb_pull_rcsum" [drivers/net/ppp_generic.ko] undefined!
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We're now starting to have quite a number of places that do skb_pull
followed immediately by an skb_postpull_rcsum.  We can merge these two
operations into one function with skb_pull_rcsum.  This makes sense
since most pull operations on receive skb's need to update the
checksum.

I've decided to make this out-of-line since it is fairly big and the
fast path where hardware checksums are enabled need to call
csum_partial anyway.

Since this is a brand new function we get to add an extra check on the
len argument.  As it is most callers of skb_pull ignore its return
value which essentially means that there is no check on the len
argument.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Uninline kfree_skb, which saves some 15k of object code on my notebook.

o Allow kfree_skb to be called with a NULL argument.

  Subsequent patches can remove conditional from drivers and further
  reduce source and object size.
Signed-off-by: NJrn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of netfilter-related members are initalized / copied twice in
skb_clone(). Remove one.

Pointed out by Olivier MATZ <olivier.matz@6wind.com>.

And this patch also fixes order of copying / clearing members.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On the error path if we allocated an fclone then we will free it in
the wrong pool.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This changes some simple "if (x) BUG();" statements to "BUG_ON(x);"
Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Benjamin LaHaise <bcrl@kvack.org>

In __alloc_skb(), the use of skb_shinfo() which casts a u8 * to the 
shared info structure results in gcc being forced to do a reload of the 
pointer since it has no information on possible aliasing.  Fix this by 
using a pointer to refer to skb_shared_info.

By initializing skb_shared_info sequentially, the write combining buffers 
can reduce the number of memory transactions to a single write.  Reorder 
the initialization in __alloc_skb() to match the structure definition.  
There is also an alignment issue on 64 bit systems with skb_shared_info 
by converting nr_frags to a short everything packs up nicely.

Also, pass the slab cache pointer according to the fclone flag instead 
of using two almost identical function calls.

This raises bw_unix performance up to a peak of 707KB/s when combined 
with the spinlock patch.  It should help other networking protocols, too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a function takes a function pointer as argument it should use the 'return
(*pointer)(params...)' syntax used everywhere else in the kernel as this is
recognized by kernel-doc.
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing connection tracking subsystem in netfilter can only
handle ipv4.  There were basically two choices present to add
connection tracking support for ipv6.  We could either duplicate all
of the ipv4 connection tracking code into an ipv6 counterpart, or (the
choice taken by these patches) we could design a generic layer that
could handle both ipv4 and ipv6 and thus requiring only one sub-protocol
(TCP, UDP, etc.) connection tracking helper module to be written.

In fact nf_conntrack is capable of working with any layer 3
protocol.

The existing ipv4 specific conntrack code could also not deal
with the pecularities of doing connection tracking on ipv6,
which is also cured here.  For example, these issues include:

1) ICMPv6 handling, which is used for neighbour discovery in
   ipv6 thus some messages such as these should not participate
   in connection tracking since effectively they are like ARP
   messages

2) fragmentation must be handled differently in ipv6, because
   the simplistic "defrag, connection track and NAT, refrag"
   (which the existing ipv4 connection tracking does) approach simply
   isn't feasible in ipv6

3) ipv6 extension header parsing must occur at the correct spots
   before and after connection tracking decisions, and there were
   no provisions for this in the existing connection tracking
   design

4) ipv6 has no need for stateful NAT

The ipv4 specific conntrack layer is kept around, until all of
the ipv4 specific conntrack helpers are ported over to nf_conntrack
and it is feature complete.  Once that occurs, the old conntrack
stuff will get placed into the feature-removal-schedule and we will
fully kill it off 6 months later.
Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Attached is kernel patch for UDP Fragmentation Offload (UFO) feature.

1. This patch incorporate the review comments by Jeff Garzik.
2. Renamed USO as UFO (UDP Fragmentation Offload)
3. udp sendfile support with UFO

This patches uses scatter-gather feature of skb to generate large UDP
datagram. Below is a "how-to" on changes required in network device
driver to use the UFO interface.

UDP Fragmentation Offload (UFO) Interface:
-------------------------------------------
UFO is a feature wherein the Linux kernel network stack will offload the
IP fragmentation functionality of large UDP datagram to hardware. This
will reduce the overhead of stack in fragmenting the large UDP datagram to
MTU sized packets

1) Drivers indicate their capability of UFO using
dev->features |= NETIF_F_UFO | NETIF_F_HW_CSUM | NETIF_F_SG

NETIF_F_HW_CSUM is required for UFO over ipv6.

2) UFO packet will be submitted for transmission using driver xmit routine.
UFO packet will have a non-zero value for

"skb_shinfo(skb)->ufo_size"

skb_shinfo(skb)->ufo_size will indicate the length of data part in each IP
fragment going out of the adapter after IP fragmentation by hardware.

skb->data will contain MAC/IP/UDP header and skb_shinfo(skb)->frags[]
contains the data payload. The skb->ip_summed will be set to CHECKSUM_HW
indicating that hardware has to do checksum calculation. Hardware should
compute the UDP checksum of complete datagram and also ip header checksum of
each fragmented IP packet.

For IPV6 the UFO provides the fragment identification-id in
skb_shinfo(skb)->ip6_frag_id. The adapter should use this ID for generating
IPv6 fragments.
Signed-off-by: NAnanda Raju <ananda.raju@neterion.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (forwarded)
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Add kernel-doc to skbuff.h, skbuff.c to eliminate kernel-doc warnings.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

IPVS used flag NFC_IPVS_PROPERTY in nfcache but as now nfcache was removed the
new flag 'ipvs_property' still needs to be copied. This patch should be
included in 2.6.14.

Further comments from Harald Welte:

Sorry, seems like the bug was introduced by me.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

 - added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I've found the problem in general.  It affects any 64-bit
architecture.  The problem occurs when you change the system time.

Suppose that when you boot your system clock is forward by a day.
This gets recorded down in skb_tv_base.  You then wind the clock back
by a day.  From that point onwards the offset will be negative which
essentially overflows the 32-bit variables they're stored in.

In fact, why don't we just store the real time stamp in those 32-bit
variables? After all, we're not going to overflow for quite a while
yet.

When we do overflow, we'll need a better solution of course.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch puts mostly read only data in the right section
(read_mostly), to help sharing of these data between CPUS without
memory ping pongs.

On one of my production machine, tcp_statistics was sitting in a
heavily modified cache line, so *every* SNMP update had to force a
reload.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Protocols that make extensive use of SKB cloning,
for example TCP, eat at least 2 allocations per
packet sent as a result.

To cut the kmalloc() count in half, we implement
a pre-allocation scheme wherein we allocate
2 sk_buff objects in advance, then use a simple
reference count to free up the memory at the
correct time.

Based upon an initial patch by Thomas Graf and
suggestions from Herbert Xu.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reduces skb size by 8 bytes on 64-bit.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bonding just wants the device before the skb_bond()
decapsulation occurs, so simply pass that original
device into packet_type->func() as an argument.

It remains to be seen whether we can use this same
exact thing to get rid of skb->input_dev as well.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This removes the private element from skbuff, that is only used by
HIPPI. Instead it uses skb->cb[] to hold the additional data that is
needed in the output path from hard_header to device driver.

PS: The only qdisc that might potentially corrupt this cb[] is if
netem was used over HIPPI. I will take care of that by fixing netem
to use skb->stamp. I don't expect many users of netem over HIPPI
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the "list" member of struct sk_buff, as it is entirely
redundant.  All SKB list removal callers know which list the
SKB is on, so storing this in sk_buff does nothing other than
taking up some space.

Two tricky bits were SCTP, which I took care of, and two ATM
drivers which Francois Romieu <romieu@fr.zoreil.com> fixed
up.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

As discussed at netconf'05, we're trying to save every bit in sk_buff.
The patch below makes sk_buff 8 bytes smaller.  I did some basic
testing on my notebook and it seems to work.

The only real in-tree user of nfcache was IPVS, who only needs a
single bit.  Unfortunately I couldn't find some other free bit in
sk_buff to stuff that bit into, so I introduced a separate field for
them.  Maybe the IPVS guys can resolve that to further save space.

Initially I wanted to shrink pkt_type to three bits (PACKET_HOST and
alike are only 6 values defined), but unfortunately the bluetooth code
overloads pkt_type :(

The conntrack-event-api (out-of-tree) uses nfcache, but Rusty just
came up with a way how to do it without any skb fields, so it's safe
to remove it.

- remove all never-implemented 'nfcache' code
- don't have ipvs code abuse 'nfcache' field. currently get's their own
  compile-conditional skb->ipvs_property field.  IPVS maintainers can
  decide to move this bit elswhere, but nfcache needs to die.
- remove skb->nfcache field to save 4 bytes
- move skb->nfctinfo into three unused bits to save further 4 bytes
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was overwriting the computer n->tc_verd value over
and over with skb->tc_verd, by mistake.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Victor Fusco <victor@cetuc.puc-rio.br>

Fix the sparse warning "implicit cast to nocast type"
Signed-off-by: NVictor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Finds a pattern in the skb data according to the specified
textsearch configuration. Use textsearch_next() to retrieve
subsequent occurrences of the pattern. Returns the offset
to the first occurrence or UINT_MAX if no match was found.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implements sequential reading for both linear and non-linear
skb data at zerocopy cost. The data is returned in chunks of
arbitary length, therefore random access is not possible.

Usage:
	from	 := 0
	to	 := 128
	state	 := undef
	data	 := undef
	len	 := undef
	consumed := 0

	skb_prepare_seq_read(skb, from, to, &state)
	while (len = skb_seq_read(consumed, &data, &state)) != 0 do
		/* do something with 'data' of length 'len' */
		if abort then
			/* abort read if we don't wait for
			 * skb_seq_read() to return 0 */
			skb_abort_seq_read(&state)
			return
		endif
		/* not necessary to consume all of 'len' */
		consumed += len
	done
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While we're at it, lets also replace KERN_INFO by KERN_EMERG to
make sure the user gets to see it.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Here is a revised alternative that uses BUG_ON/WARN_ON
(as suggested by Herbert Xu) to eliminate NET_CALLER.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So here is a patch that introduces skb_store_bits -- the opposite of
skb_copy_bits, and uses them to read/write the csum field in rawv6.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!