- 18 8月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
These flags aren't real I/O types, but tell ll_rw_block to always lock the buffer instead of giving up on a failed trylock. Instead add a new write_dirty_buffer helper that implements this semantic and use it from the existing SWRITE* callers. Note that the ll_rw_block code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which this patch fixes. In the ufs code clean up the helper that used to call ll_rw_block to mirror sync_dirty_buffer, which is the function it implements for compound buffers. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 10 8月, 2010 6 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Make sure we check the truncate constraints early on in ->setattr by adding those checks to inode_change_ok. Also clean up and document inode_change_ok to make this obvious. As a fallout we don't have to call inode_newsize_ok from simple_setsize and simplify it down to a truncate_setsize which doesn't return an error. This simplifies a lot of setattr implementations and means we use truncate_setsize almost everywhere. Get rid of fat_setsize now that it's trivial and mark ext2_setsize static to make the calling convention obvious. Keep the inode_newsize_ok in vmtruncate for now as all callers need an audit for its removal anyway. Note: setattr code in ecryptfs doesn't call inode_change_ok at all and needs a deeper audit, but that is left for later. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Make sure we call inode_change_ok before doing any changes in ->setattr, and make sure to call it even if our fs wants to ignore normal UNIX permissions, but use the ATTR_FORCE to skip those. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Despite its name it's now a generic implementation of ->setattr, but rather a helper to copy attributes from a struct iattr to the inode. Rename it to setattr_copy to reflect this fact. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Move the call to vmtruncate to get rid of accessive blocks to the callers in preparation of the new truncate sequence and rename the non-truncating version to cont_write_begin. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Move the call to vmtruncate to get rid of accessive blocks to the callers in prepearation of the new truncate calling sequence. This was only done for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant was not needed anyway. Get rid of blockdev_direct_IO_no_locking and its _newtrunc variant while at it as just opencoding the two additional paramters is shorted than the name suffix. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 5月, 2010 3 次提交
-
-
由 npiggin@suse.de 提交于
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
We don't name our generic fsync implementations very well currently. The no-op implementation for in-memory filesystems currently is called simple_sync_file which doesn't make too much sense to start with, the the generic one for simple filesystems is called simple_fsync which can lead to some confusion. This patch renames the generic file fsync method to generic_file_fsync to match the other generic_file_* routines it is supposed to be used with, and the no-op implementation to noop_fsync to make it obvious what to expect. In addition add some documentation for both methods. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 5月, 2010 1 次提交
-
-
由 OGAWA Hirofumi 提交于
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 5月, 2010 1 次提交
-
-
由 Arnd Bergmann 提交于
FAT does not require the BKL in its ioctl function, which is already serialized through a mutex. Since we're already touching the ioctl code, also fix the missing handling of FAT_IOCTL_GET_ATTRIBUTES in the compat code. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 01 4月, 2010 1 次提交
-
-
由 Nikolaus Schulz 提交于
When using the string representation of a random counter as part of the base name, ensure that it is no longer than 4 bytes. Since we are repeatedly decrementing the counter in a loop until we have found a unique base name, the counter may wrap around zero; therefore, it is not enough to mask its higher bits before entering the loop, this must be done inside the loop. [hirofumi@mail.parknet.co.jp: use snprintf()] Signed-off-by: NNikolaus Schulz <microschulz@web.de> Cc: stable@kernel.org Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 16 3月, 2010 2 次提交
-
-
由 OGAWA Hirofumi 提交于
Other users doesn't check NULL explicitly. So, these doesn't also check to remove inconsistency. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
由 Andy Shevchenko 提交于
Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 06 3月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
This gives the filesystem more information about the writeback that is happening. Trond requested this for the NFS unstable write handling, and other filesystems might benefit from this too by beeing able to distinguish between the different callers in more detail. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 10 2月, 2010 1 次提交
-
-
由 Kevin Dankwardt 提交于
I found that the length of a file name when created cannot exceed 255 characters, yet, pathconf(), via statfs(), returns the maximum as 260. Signed-off-by: NKevin Dankwardt <k@kcomputing.com> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 12 1月, 2010 1 次提交
-
-
由 OGAWA Hirofumi 提交于
After d_find_alias(), vfat_lookup() checks !(->d_flags & DCACHE_DISCONNECTED) without IS_ROOT(). This means it hits non-anonymous but disconnected dentry. (NOTE: d_splice_alias() doesn't clear DCACHE_DISCONNECTED) But, vfat_lookup() has interest to alias if it was non-anonymous. So, this adds vfat_d_anon_disconn() helper to check it correctly. Another bug is refcnt leak. It needs dput() for uninterested alias. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 16 12月, 2009 1 次提交
-
-
由 Zhaolei 提交于
It is not necessary to write custom code for convert calendar time to broken-down time. time_to_tm() is more generic to do that. Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pavel Machek <pavel@ucw.cz> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 11月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Currently shipping discard capable SSDs and arrays have rather sub-optimal implementations of the command and can the use of it can cause massive slowdowns. Make issueing these commands option as it's already in btrfs and gfs2. Signed-off-by: NChristoph Hellwig <hch@lst.de> [hirofumi@mail.parknet.co.jp: tweaks, and add "discard" to fat_show_options] Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 24 9月, 2009 1 次提交
-
-
由 Thomas Gleixner 提交于
Most call sites of unload_nls() do: if (nls) unload_nls(nls); Check the pointer inside unload_nls() like we do in kfree() and simplify the call sites. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Steve French <sfrench@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 9月, 2009 1 次提交
-
-
由 OGAWA Hirofumi 提交于
If we didn't check sb->s_dirt, it will update the FSINFO unconditionally. It will reduce the filetime of flash base device. So, this checks sb->s_dirt. sb->s_dirt is racy, however FSINFO is just hint. So even if there is race, and we hit it, it would not become big problem. And this also is as workaround of suspend problem. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 14 9月, 2009 1 次提交
-
-
由 Jan Kara 提交于
fat_cont_expand() is the only user of sync_page_range_nolock(). It's also the only user of generic_osync_inode() which does not have a file open. So opencode needed actions for FAT so that we can convert generic_osync_inode() to a standard syncing path. Update a comment about generic_osync_inode(). CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 01 8月, 2009 2 次提交
-
-
由 Paul Wise 提交于
Because, with "shortname=lower", copying one FAT filesystem tree to another FAT filesystem tree using Linux results in semantically different filesystems. (E.g.: Filenames which were once "all uppercase" are now "all lowercase"). So, this changes the default of "shortname=lower" to "shortname=mixed". Signed-off-by: NPaul Wise <pabs3@bonedaddy.net> [change fat_show_options()] Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
由 OGAWA Hirofumi 提交于
With utf8 option, vfat allowed the duplicated filenames. Normal nls returns -EINVAL for invalid char. But utf8s_to_utf16s() skipped the invalid char historically. So, this changes the utf8s_to_utf16s() directly to return -EINVAL for invalid char, because vfat is only user of it. mkdir /mnt/fatfs FILENAME=`echo -ne "invalidutf8char_\\0341_endofchar"` echo "Using filename: $FILENAME" dd if=/dev/zero of=fatfs bs=512 count=128 mkdosfs -F 32 fatfs mount -o loop,utf8 fatfs /mnt/fatfs touch "/mnt/fatfs/$FILENAME" umount /mnt/fatfs mount -o loop,utf8 fatfs /mnt/fatfs touch "/mnt/fatfs/$FILENAME" ls -l /mnt/fatfs umount /mnt/fatfs ---- And the output is: Using filename: invalidutf8char_\0341_endofchar 128+0 records in 128+0 records out 65536 bytes (66 kB) copied, 0.000388118 s, 169 MB/s mkdosfs 2.11 (12 Mar 2005) total 0 -rwxr-xr-x 1 root root 0 Jun 28 19:46 invalidutf8char__endofchar -rwxr-xr-x 1 root root 0 Jun 28 19:46 invalidutf8char__endofchar Tested-by: NMarton Balint <cus@fazekas.hu> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 13 7月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 7月, 2009 1 次提交
-
-
由 Jens Axboe 提交于
Commit 1faa16d2 accidentally broke the bdi congestion wait queue logic, causing us to wait on congestion for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 20 6月, 2009 1 次提交
-
-
由 OGAWA Hirofumi 提交于
(ce3b0f8d: New helper - current_umask()) is removing the opts->fs_dmask, probably it's a cut-and-paste miss or something. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 16 6月, 2009 1 次提交
-
-
由 Alan Stern 提交于
This patch (as1239) updates the kernel's treatment of Unicode. The character-set conversion routines are well behind the current state of the Unicode specification: They don't recognize the existence of code points beyond plane 0 or of surrogate pairs in the UTF-16 encoding. The old wchar_t 16-bit type is retained because it's still used in lots of places. This shouldn't cause any new problems; if a conversion now results in an invalid 16-bit code then before it must have yielded an undefined code. Difficult-to-read names like "utf_mbstowcs" are replaced with more transparent names like "utf8s_to_utf16s" and the ordering of the parameters is rationalized (buffer lengths come immediate after the pointers they refer to, and the inputs precede the outputs). Fortunately the low-level conversion routines are used in only a few places; the interfaces to the higher-level uni2char and char2uni methods have been left unchanged. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 6月, 2009 5 次提交
-
-
由 Christoph Hellwig 提交于
Add a ->sync_fs method for data integrity syncs. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* mark directory data blocks as assoc. metadata * add new inode to deal with FAT, mark FAT blocks as assoc. metadata of that * now ->fsync() is trivial both for files and directories Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Push down lock_super into ->write_super instances and remove it from the caller. Following filesystem don't need ->s_lock in ->write_super and are skipped: * bfs, nilfs2 - no other uses of s_lock and have internal locks in ->write_super * ext2 - uses BKL in ext2_write_super and has internal calls without s_lock * reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in ->write_super * xfs - no other uses of s_lock and uses internal lock (buffer lock on superblock buffer) to serialize ->write_super. Also xfs_fs_write_super is superflous and will go away in the next merge window Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Move BKL into ->put_super from the only caller. A couple of filesystems had trivial enough ->put_super (only kfree and NULLing of s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs, hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most of them probably don't need it, but I'd rather sort that out individually. Preferably after all the other BKL pushdowns in that area. [AV: original used to move lock_super() down as well; these changes are removed since we don't do lock_super() at all in generic_shutdown_super() now] [AV: fuse, btrfs and xfs are known to need no damn BKL, exempt] Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
We just did a full fs writeout using sync_filesystem before, and if that's not enough for the filesystem it can perform it's own writeout in ->put_super, which many filesystems already do. Move a call to foofs_write_super into every foofs_put_super for now to guarantee identical behaviour until it's cleaned up by the individual filesystem maintainers. Exceptions: - affs already has identical copy & pasted code at the beginning of affs_put_super so no need to do it twice. - xfs does the right thing without it and I have changes pending for the xfs tree touching this are so I don't really need conflicts here.. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 08 6月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Split up fat_generic_ioctl and add separate functions for the two implemented ioctls. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 04 6月, 2009 1 次提交
-
-
由 Denis Karpov 提交于
On severe errors FAT remounts itself in read-only mode. Allow to specify FAT fs desired behavior through 'errors' mount option: panic, continue or remount read-only. `mount -t [fat|vfat] -o errors=[panic,remount-ro,continue] \ <bdev> <mount point>` This is analog to ext2 fs 'errors' mount option. Signed-off-by: NDenis Karpov <ext-denis.2.karpov@nokia.com> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
- 18 4月, 2009 1 次提交
-
-
由 Alan Cox 提交于
Close bug #4754. Stop people getting into a situation where they can't get their FAT filesystems to mount as they expect. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 4月, 2009 1 次提交
-
-
由 Coly Li 提交于
Make fat return f_fsid info for statfs(2). Signed-off-by: NColy Li <coly.li@suse.de> Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 4月, 2009 1 次提交
-
-
由 Al Viro 提交于
current->fs->umask is what most of fs_struct users are doing. Put that into a helper function. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-