Convert Rockchip dwmac controller dt-bindings to YAML.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Reviewed-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add Rockchip DWMAC controllers, which are based on snps,dwmac.
Some of the SoCs require up to eight clocks, so maxItems
for clocks and clock-names need to be increased.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Reviewed-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rockchip DWMAC glue driver uses the phy node (phy-handle)
reset specifier, and not a "mac-phy" reset specifier.

Remove it.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Reviewed-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 8a12f883 ("net: hso: fix null-ptr-deref during tty device
unregistration") fixed the racy minor allocation reported by syzbot, but
introduced an unconditional NULL-pointer dereference on every disconnect
instead.

Specifically, the serial device table must no longer be accessed after
the minor has been released by hso_serial_tty_unregister().

Fixes: 8a12f883 ("net: hso: fix null-ptr-deref during tty device unregistration")
Cc: stable@vger.kernel.org
Cc: Anirudh Rayabharam <mail@anirudhrb.com>
Reported-by: NLeonardo Antoniazzi <leoanto@aruba.it>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Reviewed-by: NAnirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-5.13-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-04-26

this is a pull request of 4 patches for net-next/master.

the first two patches are from Colin Ian King and target the
etas_es58x driver, they add a missing NULL pointer check and fix some
typos.

The next two patches are by Erik Flodin. The first one updates the CAN
documentation regarding filtering, the other one fixes the header
alignment in CAN related proc output on 64 bit systems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Variable ret is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/ethernet/davicom/dm9000.c:1527:5: warning: Value stored to
'ret' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Variable prev_link and curr_link is being assigned a value from a
calculation however the variable is never read, so this redundant
variable can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/ethernet/amd/pcnet32.c:2857:4: warning: Value stored to
'prev_link' is never read [clang-analyzer-deadcode.DeadStores].

drivers/net/ethernet/amd/pcnet32.c:2856:4: warning: Value stored to
'curr_link' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) The various ip(6)table_foo incarnations are updated to expect
   that the table is passed as 'void *priv' argument that netfilter core
   passes to the hook functions. This reduces the struct net size by 2
   cachelines on x86_64. From Florian Westphal.

2) Add cgroupsv2 support for nftables.

3) Fix bridge log family merge into nf_log_syslog: Missing
   unregistration from netns exit path, from Phil Sutter.

4) Add nft_pernet() helper to access nftables pernet area.

5) Add struct nfnl_info to reduce nfnetlink callback footprint and
   to facilite future updates. Consolidate nfnetlink callbacks.

6) Add CONFIG_NETFILTER_XTABLES_COMPAT Kconfig knob, also from Florian.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The compat layer needs to parse untrusted input (the ruleset)
to translate it to a 64bit compatible format.

We had a number of bugs in this department in the past, so allow users
to turn this feature off.

Add CONFIG_NETFILTER_XTABLES_COMPAT kconfig knob and make it default to y
to keep existing behaviour.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add enum nfnl_callback_type to identify the callback type to provide one
single callback.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Update batch callbacks to use the nfnl_info structure. Rename one
clashing info variable to expr_info.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Update rcu callbacks to use the nfnl_info structure.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add a new structure to reduce callback footprint and to facilite
extensions of the nfnetlink callback interface in the future.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Consolidate call to net_generic(net, nf_tables_net_id) in this
wrapper function.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Michael Chan says:

====================
bnxt_en: Updates for net-next.

This series includes these main enhancements:

1. Link related changes
    - add NRZ/PAM4 link signal mode to the link up message if known
    - rely on firmware to bring down the link during ifdown

2. SRIOV related changes
    - allow VF promiscuous mode if the VF is trusted
    - allow ndo operations to configure VF when the PF is ifdown
    - fix the scenario of the VF taking back control of it's MAC address
    - add Hyper-V VF device IDs

3. Support the option to transmit without FCS/CRC.

4. Implement .ndo_features_check() to disable offload when the UDP
   encap. packets are not supported.

v2: Patch10: Reverse the check for supported UDP ports to be more straight
forward.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For UDP encapsultions, we only support the offloaded Vxlan port and
Geneve port.  All other ports included FOU and GUE are not supported so
we need to turn off TSO and checksum features.

v2: Reverse the check for supported UDP ports to be more straight forward.
Reviewed-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If firmware is capable, set the IFF_SUPP_NOFCS flag to support the
sockets option to transmit packets without FCS.  This is mainly used
for testing.

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support VF device IDs used by the Hyper-V hypervisor.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the PF is no longer enforcing an assigned MAC address on a VF, the
VF needs to call bnxt_approve_mac() to tell the PF what MAC address it is
now using.  Otherwise it gets out of sync and the PF won't know what
MAC address the VF wants to use.  Ultimately the VF will fail when it
tries to setup the L2 MAC filter for the vnic.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move it before bnxt_update_vf_mac().  In the next patch, we need to call
bnxt_approve_mac() from bnxt_update_mac() under some conditions.  This
will avoid forward declaration.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is perfectly legal for the stack to query and configure VFs via PF
NDOs while the NIC is administratively down.  Remove the unnecessary
check for the PF to be in open state.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Firmware previously only allowed promiscuous mode for VFs associated with
a default VLAN. It is now possible to enable promiscuous mode for a VF
having no VLAN configured provided that it is trusted. In such cases the
VF will see all packets received by the PF, irrespective of destination
MAC or VLAN.

Note, it is necessary to query firmware at the time of bnxt_promisc_ok()
instead of in bnxt_hwrm_func_qcfg() because the trusted status might be
altered by the PF after the VF has been configured. This check must now
also be deferred because the firmware call sleeps.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the current code, the driver will not shutdown the link during
IFDOWN if there are still VFs sharing the port.  Newer firmware will
manage the link down decision when the port is shared by VFs, so
we can just call firmware to shutdown the port unconditionally and
let firmware make the final decision.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Copy the phy related feature flags from the firmware call
HWRM_PORT_PHY_QCAPS to this new field.  We can also remove the flags
field in the bnxt_test_info structure.  It's cleaner to have all PHY
related flags in one location, directly copied from the firmware.

To keep the BNXT_PHY_CFG_ABLE() macro logic the same, we need to make
a slight adjustment to check that it is a PF.
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Firmware reports link signalling mode for certain speeds. In these
cases, print the signalling modes in kernel log link up messages.
Reviewed-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The default behavior for source MACVLAN is to duplicate packets to
appropriate type source devices, and then do the normal destination MACVLAN
flow. This patch adds an option to skip destination MACVLAN processing if
any matching source MACVLAN device has the option set.

This allows setting up a "catch all" device for source MACVLAN: create one
or more devices with type source nodst, and one device with e.g. type vepa,
and incoming traffic will be received on exactly one device.

v2: netdev wants non-standard line length
Signed-off-by: NJethro Beekman <kernel@jbeekman.nl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-04-21

devlink external port attribute for SF (Sub-Function) port flavour

This adds the support to instantiate Sub-Functions on external hosts
E.g when Eswitch manager is enabled on the ARM SmarNic SoC CPU, users
are now able to spawn new Sub-Functions on the Host server CPU.

Parav Pandit Says:
==================

This series introduces and uses external attribute for the SF port to
indicate that a SF port belongs to an external controller.

This is needed to generate unique phys_port_name when PF and SF numbers
are overlapping between local and external controllers.
For example two controllers 0 and 1, both of these controller have a SF.
having PF number 0, SF number 77. Here, phys_port_name has duplicate
entry which doesn't have controller number in it.

Hence, add controller number optionally when a SF port is for an
external controller. This extension is similar to existing PF and VF
eswitch ports of the external controller.

When a SF is for external controller an example view of external SF
port and config sequence:

On eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev

$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
  function:
    hw_addr 00:00:00:00:00:00

$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached

phys_port_name construction:
$ cat /sys/class/net/eth1/phys_port_name
c1pf0sf77

Patch summary:
First 3 patches prepares the eswitch to handle vports in more generic
way using xarray to lookup vport from its unique vport number.
Patch-1 returns maximum eswitch ports only when eswitch is enabled
Patch-2 prepares eswitch to return eswitch max ports from a struct
Patch-3 uses xarray for vport and representor lookup
Patch-4 considers SF for an additioanl range of SF vports
Patch-5 relies on SF hw table to check SF support
Patch-6 extends SF devlink port attribute for external flag
Patch-7 stores the per controller SF allocation attributes
Patch-8 uses SF function id for filtering events
Patch-9 uses helper for allocation and free
Patch-10 splits hw table into per controller table and generic one
Patch-11 extends sf table for additional range

==================

====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds device tree probing to the IXP4xx ethernet
driver.

Add a platform data bool to tell us whether to
register an MDIO bus for the device or not, as well
as the corresponding NPE.

We need to drop the memory region request as part of
this since the OF core will request the memory for the
device.

Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This driver was using a really dated way of obtaining the
phy by printing a string and using it with phy_connect().
Switch to using more reasonable modern interfaces.
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds device tree bindings for the IXP4xx ethernet
controller with optional MDIO bridge.

Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove DELL_TB_RX_AGG_BUG and LENOVO_MACPASSTHRU flags of rtl8152_flags.
They are only set when initializing and wouldn't be change. It is enough
to record them with variables.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this, a stale pointer remains in pernet loggers after module
unload causing a kernel oops during dereference. Easily reproduced by:

| # modprobe nf_log_syslog
| # rmmod nf_log_syslog
| # cat /proc/net/netfilter/nf_log

Fixes: 77ccee96 ("netfilter: nf_log_bridge: merge with nf_log_syslog")
Signed-off-by: NPhil Sutter <phil@nwl.cc>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

No longer needed, table pointer arg is now passed via netfilter core.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Same patch as the ip_tables one: removal of all accesses to ip6_tables
xt_table pointers.  After this patch the struct net xt_table anchors
can be removed.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Same change as previous patch.  Only difference:
no need to handle NULL template_ops parameter, the only caller
(arptable_filter) always passes non-NULL argument.

This removes all remaining accesses to net->ipv4.arptable_filter.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

iptable_x modules rely on 'struct net' to contain a pointer to the
table that should be evaluated.

In order to remove these pointers from struct net, pass them via
the 'priv' pointer in a similar fashion as nf_tables passes the
rule data.

To do that, duplicate the nf_hook_info array passed in from the
iptable_x modules, update the ops->priv pointers of the copy to
refer to the table and then change the hookfn implementations to
just pass the 'priv' argument to the traverser.

After this patch, the xt_table pointers can already be removed
from struct net.

However, changes to struct net result in re-compile of the entire
network stack, so do the removal after arptables and ip6tables
have been converted as well.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This changes how ip(6)table nat passes the ruleset/table to the
evaluation loop.

At the moment, it will fetch the table from struct net.

This change stores the table in the hook_ops 'priv' argument
instead.

This requires to duplicate the hook_ops for each netns, so
they can store the (per-net) xt_table structure.

The dupliated nat hook_ops get stored in net_generic data area.
They are free'd in the namespace exit path.

This is a pre-requisite to remove the xt_table/ruleset pointers
from struct net.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

No need for these.
There is only one caller, the xtables core, when the table is registered
for the first time with a particular network namespace.

After ->table_init() call, the table is linked into the tables[af] list,
so next call to that function will skip the ->table_init().
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

and again, this time for arptables.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>