- 11 4月, 2015 7 次提交
-
-
由 Daniel Axtens 提交于
Add pci_controller_ops.enable_device_hook, shadowing ppc_md.pcibios_enable_device_hook. Add a shim, and changes the callsites to use the shim. Signed-off-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Daniel Axtens 提交于
Add pci_controller_ops.probe_mode, shadowing ppc_md.pci_probe_mode. Add a shim, and changes the callsites to use the shim. We also need to move the probe mode defines to pci-bridge.h from pci.h. They are required by the shim in order to return a sensible default. Previously, the were defined in pci.h, but pci.h includes pci-bridge.h before the relevant #defines. This means the definitions are absent if pci.h is included before pci-bridge.h. This occurs in some drivers. So, move the definitons now, and move them back when we remove the shim. Anything that wants the defines would have had to include pci.h, and since pci.h includes pci-bridge.h, nothing will lose access to the defines. Signed-off-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Daniel Axtens 提交于
Add pci_controller_ops.dma_bus_setup, shadowing ppc_md.pci_dma_bus_setup. Add a shim, and changes the callsites to use the shim. Signed-off-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Daniel Axtens 提交于
Introduces the pci_controller_ops structure. Add pci_controller_ops.dma_dev_setup, shadowing ppc_md.pci_dma_dev_setup. Add a shim, and change the callsites to use the shim. Signed-off-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Daniel Axtens 提交于
pcibios_enable_device_hook returned an int. Every implementation returned either -EINVAL or 0. The return value wasn't propagated by the caller: any non-zero return value caused pcibios_enable_device to return -EINVAL itself. Therefore, make the hook return a bool. Signed-off-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Daniel Axtens 提交于
Signed-off-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Daniel Axtens 提交于
Previously, find_and_init_phbs() was used in both PowerNV and pSeries setup. However, since RTAS support has been dropped from PowerNV, we can move it into a platform-specific file. Signed-off-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 10 4月, 2015 6 次提交
-
-
由 Michael Ellerman 提交于
smp_ops->probe() is currently supposed to return the number of cpus in the system. The last actual usage of the value was removed in May 2007 in e147ec8f "[POWERPC] Simplify smp_space_timers". We still passed the value around until June 2010 when even that was finally removed in c1aa687d "powerpc: Clean up obsolete code relating to decrementer and timebase". So drop that requirement, probe() now returns void, and update all implementations. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
The patch to add it_page_shift incorrectly changed the increment of uaddr to use it_page_shift, rather then (1 << it_page_shift). This broke booting on at least some Cell blades, as the iommu was basically non-functional. Fixes: 3a553170 ("powerpc/iommu: Add it_page_shift field to determine iommu page size") Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
The conversion from __get_cpu_var() to this_cpu_ptr() in iic_setup_cpu() is wrong. It causes an oops at boot. We need the per-cpu address of struct cpu_iic, not cpu_iic.regs->prio. Sparse noticed this, because we pass a non-iomem pointer to out_be64(), but we obviously don't check the sparse results often enough. Fixes: 69111bac ("powerpc: Replace __get_cpu_var uses") Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
We get way too many bug reports that say "the kernel is hung in prom_init", which stems from the fact that the last piece of output people see is "returning from prom_init". The kernel is almost never hung in prom_init(), it's just that it's crashed somewhere after prom_init() but prior to the console coming up. The existing message should give a clue to that, ie. "returning from" indicates that prom_init() has finished, but it doesn't seem to work. Let's try something different. This prints: Quiescing Open Firmware ... Booting Linux via __start() ... Which hopefully makes it clear that prom_init() is not the problem, and although __start() probably isn't either, it's at least the right place to begin looking. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Wistfully-Acked-by: NJeremy Kerr <jk@ozlabs.org>
-
由 Michael Ellerman 提交于
We have a powerpc specific global called mem_init_done which is "set on boot once kmalloc can be called". But that's not *quite* true. We set it at the bottom of mem_init(), and rely on the fact that mm_init() calls kmem_cache_init() immediately after that, and nothing is running in parallel. So replace it with the generic and 100% correct slab_is_available(). Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Fix the 32-bit code also] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 07 4月, 2015 7 次提交
-
-
由 Michael Ellerman 提交于
The callers of setbat() are actually passing a pgprot_t for the flags parameter. This doesn't matter unless STRICT_MM_TYPECHECKS is enabled. So we can turn that on without breaking the build, change setbat() to take a pgprot_t and have it convert it to an unsigned long internally. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
This is already declared in mmu_decl.h, so we don't need a second version in the C file. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
The celleb code has seen no actual development for ~7 years. We (maintainers) have no access to test hardware, and it is highly likely the code has bit-rotted. As far as we're aware the hardware was never widely available, and is certainly no longer available, and no one on the list has shown any interest in it over the years. So remove it. If anyone has one and cares please speak up. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NJeremy Kerr <jk@ozlabs.org>
-
由 Michael Ellerman 提交于
The powernv code has some conditional support for running on bare metal machines that have no OPAL firmware, but provide RTAS. No released machines ever supported that, and even in the lab it was just a transitional hack in the days when OPAL was still being developed. So remove the code. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NStewart Smith <stewart@linux.vnet.ibm.com>
-
由 Michael Ellerman 提交于
Merge branch 'next-remove-ldst' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc into next
-
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux由 Michael Ellerman 提交于
Freescale updates from Scott: "Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup."
-
- 01 4月, 2015 7 次提交
-
-
由 Shengzhou Liu 提交于
By default we enable CONFIG_I2C_MUX and CONFIG_I2C_MUX_PCA954x, which are needed on T2080QDS, T4240QDS, B4860QDS, etc. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> [scottwood@freescale.com: fixed subject line] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Shengzhou Liu 提交于
RTC interrupt uses IRQ11 on T2080QDS. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> [scottwood@freescale.com: fix subject line] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Bogdan Purcareata 提交于
After previous discussions regarding the subject [1][2], there's no clear explanation or reason why the call was needed in the first place. The sensible argument is some sort of synchronization between the CPU and the MPIC, which hasn't been pointed out precisely and is no longer required (at least on BookE platforms). The benefit of this change is saving a MMIO trap per interrupt when running in a KVM guest. [1] https://patchwork.ozlabs.org/patch/429098/ [2] https://patchwork.ozlabs.org/patch/433557/Signed-off-by: NBogdan Purcareata <bogdan.purcareata@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Yanjiang Jin 提交于
The k(un)map function may be called in atomic context in the function map_and_flush(), so use k(un)map_atomic to replace it, else we would get the below warning during kdump: BUG: sleeping function called from invalid context at include/linux/highmem.h:58 in_atomic(): 1, irqs_disabled(): 1, pid: 736, name: sh INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [< (null)>] (null) hardirqs last disabled at (0): [<c000000000066d1c>] .copy_process.part.44+0x50c/0x1360 softirqs last enabled at (0): [<c000000000066d1c>] .copy_process.part.44+0x50c/0x1360 softirqs last disabled at (0): [< (null)>] (null) CPU: 1 PID: 736 Comm: sh Tainted: G D W 3.10.62-ltsi-WR6.0.0.0_standard #2 Call Trace: [c0000000f47cf120] [c00000000000b150] .show_stack+0x170/0x290 (unreliable) [c0000000f47cf210] [c000000000b71334] .dump_stack+0x28/0x3c [c0000000f47cf280] [c0000000000bb5d8] .__might_sleep+0x1a8/0x270 [c0000000f47cf310] [c0000000000440cc] .map_and_flush+0x4c/0xc0 [c0000000f47cf390] [c0000000000441cc] .mpc85xx_smp_machine_kexec+0x8c/0xec0 [c0000000f47cf420] [c00000000002ae00] .machine_kexec+0x60/0x90 [c0000000f47cf4b0] [c00000000010957c] .crash_kexec+0x8c/0x100 [c0000000f47cf6a0] [c000000000015df8] .die+0x348/0x450 [c0000000f47cf740] [c00000000002f3a0] .bad_page_fault+0xe0/0x130 [c0000000f47cf7c0] [c00000000001f3e4] storage_fault_common+0x40/0x44 Signed-off-by: NYanjiang Jin <yanjiang.jin@windriver.com> [scottwood@freescale.com: fix subject line] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Julia Lawall 提交于
The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL; @@ -EXPORT_SYMBOL(f); // </smpl> Furthermore, the function is never used, so its definition is dropped as well. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Kevin Hao 提交于
All the cache line size of the current book3e 64bit SoCs are 64 bytes. So we should use this size to align the member of paca_struct. This only change the paca_struct's members which are private to book3e CPUs, and should not have any effect to book3s ones. With this, we save 192 bytes. Also change it to __aligned(size) since it is preferred over __attribute__((aligned(size))). Before: /* size: 1920, cachelines: 30, members: 46 */ /* sum members: 1667, holes: 6, sum holes: 141 */ /* padding: 112 */ After: /* size: 1728, cachelines: 27, members: 46 */ /* sum members: 1667, holes: 4, sum holes: 13 */ /* padding: 48 */ Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Madalin Bucur 提交于
Signed-off-by: NMadalin Bucur <madalin.bucur@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 31 3月, 2015 6 次提交
-
-
由 LEROY Christophe 提交于
This patch fixes a section mismatch warning WARNING: vmlinux.o(.text+0x213b6): Section mismatch in reference from the function chrp_init_early() to the variable .init.data:boot_command_line The function chrp_init_early() references the variable __initdata boot_command_line. This is often because chrp_init_early lacks a __initdata annotation or the annotation of boot_command_line is wrong. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Cédric Le Goater 提交于
Currently, when a sensor value is read, the kernel calls OPAL, which in turn builds a message for the FSP, and waits for a message back. The new device tree for OPAL sensors [1] adds new sensors that can be read synchronously (core temperatures for instance) and that don't need to wait for a response. This patch modifies the opal call to accept an OPAL_SUCCESS return value and cover the case above. [1] https://lists.ozlabs.org/pipermail/skiboot/2015-March/000639.htmlSigned-off-by: NCédric Le Goater <clg@fr.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Cédric Le Goater 提交于
OPAL has its own list of return codes. The patch provides a translation of such codes in errnos for the opal_sensor_read call, and possibly others if needed. Signed-off-by: NCédric Le Goater <clg@fr.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Joe Perches 提交于
Use the normal return values for bool functions Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
If M64 has been supported, the prefetchable 64-bits memory resources shouldn't be mapped to the corresponding PE# via M32DT. Unfortunately, we're doing that in pnv_ioda_setup_pe_seg() wrongly. The issue was introduced by commit 262af557 ("powerpc/powernv: Enable M64 aperatus for PHB3"). The patch fixes the issue by simply skipping M64 resources when updating to M32DT. Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The function eeh_add_parent_pe() is used to create a PE or add one edev to its parent PE. Current code checks if PE#0 is valid for the later case. Actually, we should validate PE#0 for both cases when EEH core regards PE#0 as invalid one (without flag EEH_VALID_PE_ZERO). Otherwise, not all EEH devices can be added to its parent PE#0 for EEH on P7IOC. The patch fixes the issue by validating PE#0 for the two cases. So far, we don't have PE#0 for EEH on P7IOC, but it will show up when we enable M64 for P7IOC. The patch also makes the error message more meaningful. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 28 3月, 2015 3 次提交
-
-
由 Michael Ellerman 提交于
This adds a test of the switch_endian() syscall we added in the previous commit. We test it by calling the endian switch syscall, and then executing some code in the other endian to check everything went as expected. That code checks registers we expect to be maintained are. If the endian switch failed to happen that code sequence will be illegal and cause the test to abort. We then switch back to the original endian, do the same checks and finally write a success message and exit(0). Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
We currently have a "special" syscall for switching endianness. This is syscall number 0x1ebe, which is handled explicitly in the 64-bit syscall exception entry. That has a few problems, firstly the syscall number is outside of the usual range, which confuses various tools. For example strace doesn't recognise the syscall at all. Secondly it's handled explicitly as a special case in the syscall exception entry, which is complicated enough without it. As a first step toward removing the special syscall, we need to add a regular syscall that implements the same functionality. The logic is simple, it simply toggles the MSR_LE bit in the userspace MSR. This is the same as the special syscall, with the caveat that the special syscall clobbers fewer registers. This version clobbers r9-r12, XER, CTR, and CR0-1,5-7. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Tyrel Datwyler 提交于
During suspend/migration operation we must wait for the VASI state reported by the hypervisor to become Suspending prior to making the ibm,suspend-me RTAS call. Calling routines to rtas_ibm_supend_me() pass a vasi_state variable that exposes the VASI state to the caller. This is unnecessary as the caller only really cares about the following three conditions; if there is an error we should bailout, success indicating we have suspended and woken back up so proceed to device tree update, or we are not suspendable yet so try calling rtas_ibm_suspend_me again shortly. This patch removes the extraneous vasi_state variable and simply uses the return code to communicate how to proceed. We either succeed, fail, or get -EAGAIN in which case we sleep for a second before trying to call rtas_ibm_suspend_me again. The behaviour of ppc_rtas() remains the same, but migrate_store() now returns the propogated error code on failure. Previously -1 was returned from migrate_store() in the failure case which equates to -EPERM and was clearly wrong. Signed-off-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com> Cc: Nathan Fontenont <nfont@linux.vnet.ibm.com> Cc: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 27 3月, 2015 2 次提交
-
-
由 Philippe Bergheaud 提交于
Fix the attribute name of the configuration record class ID. Signed-off-by: NPhilippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Jan Stancek 提交于
One path in power_pmu_event_init() calls get_cpu_var(), but is missing matching call to put_cpu_var(), which causes preemption imbalance and crash in user-space: Page fault in user mode with in_atomic() = 1 mm = c000001fefa5a280 NIP = 3fff9bf2cae0 MSR = 900000014280f032 Oops: Weird page fault, sig: 11 [#23] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: <snip> CPU: 43 PID: 10285 Comm: a.out Tainted: G D 4.0.0-rc5+ #1 task: c000001fe82c9200 ti: c000001fe835c000 task.ti: c000001fe835c000 NIP: 00003fff9bf2cae0 LR: 00003fff9bee4898 CTR: 00003fff9bf2cae0 REGS: c000001fe835fea0 TRAP: 0401 Tainted: G D (4.0.0-rc5+) MSR: 900000014280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 22000028 XER: 00000000 CFAR: 00003fff9bee4894 SOFTE: 1 GPR00: 00003fff9bee494c 00003fffe01c2ee0 00003fff9c084410 0000000010020068 GPR04: 0000000000000000 0000000000000002 0000000000000008 0000000000000001 GPR08: 0000000000000001 00003fff9c074a30 00003fff9bf2cae0 00003fff9bf2cd70 GPR12: 0000000052000022 00003fff9c10b700 NIP [00003fff9bf2cae0] 0x3fff9bf2cae0 LR [00003fff9bee4898] 0x3fff9bee4898 Call Trace: ---[ end trace 5d3d952b5d4185d4 ]--- BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:41 in_atomic(): 1, irqs_disabled(): 0, pid: 10285, name: a.out INFO: lockdep is turned off. CPU: 43 PID: 10285 Comm: a.out Tainted: G D 4.0.0-rc5+ #1 Call Trace: [c000001fe835f990] [c00000000089c014] .dump_stack+0x98/0xd4 (unreliable) [c000001fe835fa10] [c0000000000e4138] .___might_sleep+0x1d8/0x2e0 [c000001fe835faa0] [c000000000888da8] .down_read+0x38/0x110 [c000001fe835fb30] [c0000000000bf2f4] .exit_signals+0x24/0x160 [c000001fe835fbc0] [c0000000000abde0] .do_exit+0xd0/0xe70 [c000001fe835fcb0] [c00000000001f4c4] .die+0x304/0x450 [c000001fe835fd60] [c00000000088e1f4] .do_page_fault+0x2d4/0x900 [c000001fe835fe30] [c000000000008664] handle_page_fault+0x10/0x30 note: a.out[10285] exited with preempt_count 1 Reproducer: #include <stdio.h> #include <unistd.h> #include <syscall.h> #include <sys/types.h> #include <sys/stat.h> #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> static struct perf_event_attr event = { .type = PERF_TYPE_RAW, .size = sizeof(struct perf_event_attr), .sample_type = PERF_SAMPLE_BRANCH_STACK, .branch_sample_type = PERF_SAMPLE_BRANCH_ANY_RETURN, }; int main() { syscall(__NR_perf_event_open, &event, 0, -1, -1, 0); } Signed-off-by: NJan Stancek <jstancek@redhat.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 26 3月, 2015 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Michael Ellerman 提交于
Merge miscellaneous bits from benh. Fix a minor conflict with OpalMessageType changing names to opal_msg_type.
-
由 Preeti U Murthy 提交于
We currently read the information about idle states from the device tree, so as to find out the CPU idle states supported by the platform. Use the of_property_read/count_xxx() APIs, which handle endian conversions for us, and mean we don't need any endian annotations in the code. Signed-off-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-