Originally, we used the signal->lock as a means of following the
previous link in its timeline and peeking at the previous fence.
However, we have replaced the explicit serialisation with a series of
very careful probes that anticipate the links being deleted and the
fences recycled before we are able to acquire a strong reference to it.
We do not need the signal->lock crutch anymore, nor want the contention.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NAndi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114135612.13210-2-chris@chris-wilson.co.uk

When we know that we are inside the timeline mutex, or inside the
submission flow (under active.lock or the holder's rcu lock), we know
that the rq->hwsp is stable and we can use the simpler direct version.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NAndi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114135612.13210-1-chris@chris-wilson.co.uk

Backmerging to get a common base for merging topic branches between
drm-intel-next and drm-intel-gt-next.
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge tag 'drm-intel-gt-next-2021-01-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:
- Deprecate I915_PMU_LAST and optimize state tracking (Tvrtko)

  Avoid relying on last item ABI marker in i915_drm.h, add a
  comment to mark as deprecated.

Cross-subsystem Changes:

Core Changes:

Driver Changes:

- Restore clear residuals security mitigations for Ivybridge and
  Baytrail (Chris)
- Close #1858: Allow sysadmin to choose applied GPU security mitigations
  through i915.mitigations=... similar to CPU (Chris)
- Fix for #2024: GPU hangs on HSW GT1 (Chris)
- Fix for #2707: Driver hang when editing UVs in Blender (Chris, Ville)
- Fix for #2797: False positive GuC loading error message (Chris)
- Fix for #2859: Missing GuC firmware for older Cometlakes (Chris)
- Lessen probability of GPU hang due to DMAR faults [reason 7,
  next page table ptr is invalid] on Tigerlake (Chris)
- Fix REVID macros for TGL to fetch correct stepping (Aditya)
- Limit frequency drop to RPe on parking (Chris, Edward)
- Limit W/A 1406941453 to TGL, RKL and DG1 (Swathi)
- Make W/A 22010271021 permanent on DG1 (Lucas)
- Implement W/A 16011163337 to prevent a HS/DS hang on DG1 (Swathi)
- Only disable preemption on gen8 render engines (Chris)
- Disable arbitration around Braswell's PDP updates (Chris)
- Disable arbitration on no-preempt requests (Chris)
- Check for arbitration after writing start seqno before busywaiting (Chris)
- Retain default context state across shrinking (Venkata, CQ)
- Fix mismatch between misplaced vma check and vma insert for 32-bit
  addressing userspaces (Chris, CQ)
- Propagate error for vmap() failure instead kernel NULL deref (Chris)
- Propagate error from cancelled submit due to context closure
  immediately (Chris)
- Fix RCU race on HWSP tracking per request (Chris)
- Clear CMD parser shadow and GPU reloc batches (Matt A)

- Populate logical context during first pin (Maarten)
- Optimistically prune dma-resv from the shrinker (Chris)
- Fix for virtual engine ownership race (Chris)
- Remove timeslice suppression to restore fairness for virtual engines (Chris)
- Rearrange IVB/HSW workarounds properly between GT and engine (Chris)
- Taint the reset mutex with the shrinker (Chris)
- Replace direct submit with direct call to tasklet (Chris)
- Multiple corrections to virtual engine dequeue and breadcrumbs code (Chris)
- Avoid wakeref from potentially hard IRQ context in PMU (Tvrtko)
- Use raw clock for RC6 time estimation in PMU (Tvrtko)
- Differentiate OOM failures from invalid map types (Chris)
- Fix Gen9 to have 64 MOCS entries similar to Gen11 (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Remove livelock from "do_idle_maps" VT-d W/A (Chris)
- Cancel the preemption timeout early in case engine reset fails (Chris)
- Code flow optimization in the scheduling code (Chris)
- Clear the execlists timers upon reset (Chris)
- Drain the breadcrumbs just once (Chris, Matt A)
- Track the overall GT awake/busy time (Chris)
- Tweak submission tasklet flushing to avoid starvation (Chris)
- Track timelines created using the HWSP to restore on resume (Chris)
- Use cmpxchg64 for 32b compatilibity for active tracking (Chris)
- Prefer recycling an idle GGTT fence to avoid GPU wait (Chris)

- Restructure GT code organization for clearer split between GuC
  and execlists (Chris, Daniele, John, Matt A)
- Remove GuC code that will remain unused by new interfaces (Matt B)
- Restructure the CS timestamp clocks code to local to GT (Chris)
- Fix error return paths in perf code (Zhang)
- Replace idr_init() by idr_init_base() in perf (Deepak)
- Fix shmem_pin_map error path (Colin)
- Drop redundant free_work worker for GEM contexts (Chris, Mika)
- Increase readability and understandability of intel_workarounds.c (Lucas)
- Defer enabling the breadcrumb interrupt to after submission (Chris)
- Deal with buddy alloc block sizes beyond 4G (Venkata, Chris)
- Encode fence specific waitqueue behaviour into the wait.flags (Chris)
- Don't cancel the breadcrumb interrupt shadow too early (Chris)
- Cancel submitted requests upon context reset (Chris)
- Use correct locks in GuC code (Tvrtko)
- Prevent use of engine->wa_ctx after error (Chris, Matt R)

- Fix build warning on 32-bit (Arnd)
- Avoid memory leak if platform would have more than 16 W/A (Tvrtko)
- Avoid unnecessary #if CONFIG_PM in PMU code (Chris, Tvrtko)
- Improve debugging output (Chris, Tvrtko, Matt R)
- Make file local variables static (Jani)
- Avoid uint*_t types in i915 (Jani)
- Selftest improvements (Chris, Matt A, Dan)
- Documentation fixes (Chris, Jose)
Signed-off-by: NDave Airlie <airlied@redhat.com>

# Conflicts:
#	drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
#	drivers/gpu/drm/i915/gt/intel_breadcrumbs_types.h
#	drivers/gpu/drm/i915/gt/intel_lrc.c
#	drivers/gpu/drm/i915/gvt/mmio_context.h
#	drivers/gpu/drm/i915/i915_drv.h
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114152232.GA21588@jlahtine-mobl.ger.corp.intel.com

- PSR fixes and improvements for selective fetch (Jose)
- GVT build fixed and cleanup (Jani)
- RKL display fixes (Lee, Matt)
- DSI fix (Hans)
- Panel Power and Backlight fixes (Anshuman, Jani)
- RPM fix (Chris)
- Fix HTI port checking (Jose)
- Clean-up in cursor code (Ville)
- Once again, trying to use fast+narrow link on eDP (Ville)
- DG1 display fix (Matt)
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112175151.GA90999@intel.com

Merge tag 'amd-drm-next-5.12-2021-01-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.12-2021-01-08:

amdgpu:
- Rework IH ring handling on vega and navi
- Rework HDP handling for vega and navi
- swSMU documenation updates
- Overdrive support for Sienna Cichlid and newer asics
- swSMU updates for vangogh
- swSMU updates for renoir
- Enable FP16 on DCE8-11
- Misc code cleanups and bug fixes

radeon:
- Fixes for platforms that can't access PCI resources correctly
- Misc code cleanups

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108221811.3868-1-alexander.deucher@amd.comSigned-off-by: NDave Airlie <airlied@redhat.com>

Remove all the manual inlines from non-critical sections in gt/

add/remove: 2/0 grow/shrink: 0/3 up/down: 762/-1473 (-711)
Function                                     old     new   delta
mi_set_context.isra                            -     602    +602
write_dma_entry                                -     160    +160
__set_pd_entry                               214      69    -145
clear_pd_entry                               190      42    -148
ring_request_alloc                          2021     841   -1180
Total: Before=1605086, After=1604375, chg -0.04%
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113152224.29794-1-chris@chris-wilson.co.uk

Remove the extraneous inlines. The only split by the compiler that
looked dubious was execlists_schedule_out, so push the code around
slightly to move all the work into the out-of-line function.

In a normal build, bloat-o-meter shows that only the
execlists_schedule_out is contentious:

add/remove: 1/0 grow/shrink: 0/2 up/down: 803/-1532 (-729)
Function                                     old     new   delta
__execlists_schedule_out                       -     803    +803
execlists_submission_tasklet                6488    5766    -722
execlists_reset_csb.constprop               1587     777    -810
Total: Before=1605815, After=1605086, chg -0.05%
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113151112.15212-1-chris@chris-wilson.co.uk

The GFX_MODE is reset along with the engine, turning off ppGTT. We need
to re-enable it upon resume afterwards.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114101451.24762-1-chris@chris-wilson.co.uk

Always prefer the kernel types over stdint types in i915.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113141317.30765-1-jani.nikula@intel.com

Some rcs0 workarounds were being incorrectly applied to the GT, and so
we failed to restore the expected register settings after a reset.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113225144.30810-2-chris@chris-wilson.co.uk

Some rcs0 workarounds were being incorrectly applied to the GT, and so
we failed to restore the expected register settings after a reset.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113225144.30810-1-chris@chris-wilson.co.uk

In the legacy ringbuffer submission, we still had an open-coded version
of intel_engine_stop_cs() with one additional verification step. Transfer
that verification to intel_engine_stop_cs() itself, and call it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113204709.15020-1-chris@chris-wilson.co.uk

Since we are system_highpri_wq, we expected the heartbeat to be
scheduled promptly. However, we see delays of over 10ms upsetting our
assertions. Accept this as inevitable and bump the minimum error
threshold to 20ms (from 6 jiffies).

<6> [616.784749] rcs0: Heartbeat delay: 3570us [2802, 9188]
<6> [616.807790] bcs0: Heartbeat delay: 2111us [745, 4372]
<6> [616.853776] vcs0: Heartbeat delay: 6485us [2424, 11637]
<3> [616.859296] vcs0: Heartbeat delay was 6485us, expected less than 6000us
<3> [616.860901] i915/intel_heartbeat_live_selftests: live_heartbeat_fast failed with error -22

v2: More context from CI.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113163115.5740-2-chris@chris-wilson.co.uk

Inject a fault into the engine reset and check that the outstanding
requests are completed despite the failed reset.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113205049.22565-1-chris@chris-wilson.co.uk

Initialize all required entries from guc_set_default_submission, instead
of calling the execlists function. The previously inherited setup has
been copied over from the execlist code and simplified by removing the
execlists submission-specific parts.

v2: move setting of relative_mmio flag to engine_setup_common (Chris)
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-5-daniele.ceraolospurio@intel.com

Instead of starting the engine in execlists submission mode and then
switching to GuC, start directly in GuC submission mode. The initial
setup functions have been copied over from the execlists code
and simplified by removing the execlists submission-specific parts.

v2: remove unneeded unexpected starting state check (Chris)
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-4-daniele.ceraolospurio@intel.com

GuC owns the execlists state and the context IDs used for submission, so
the status of the ports and the CSB entries are not something we control
or can decode from the i915 side, therefore we can avoid dumping it. A
follow-up patch will also stop setting the csb pointers when using GuC
submission.

GuC dumps all the required events in the GuC logs when verbosity is set
high enough.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-3-daniele.ceraolospurio@intel.com

Delete GuC code unused in future patches that rewrite the GuC interface
to work with the new firmware. Most of the code deleted relates to
workqueues or execlist port. The code is safe to remove because we still
don't allow GuC submission to be enabled, even when overriding the
modparam, so it currently can't be reached.

The defines + structs for the process descriptor and workqueue remain.
Although the new GuC interface does not require either of these for the
normal submission path multi-lrc submission does. The usage of the
process descriptor and workqueue for multi-lrc will be quite different
from the code that is deleted in this patch. A future patch will
implement multi-lrc submission.

v2: add a code in the commit message about the code being safe to
remove (Chris)
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-2-daniele.ceraolospurio@intel.com

Device local-memory should be thought of as part the GT, which means it
should also sit under gt/.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112164300.356524-1-matthew.auld@intel.com

There are no users outside of intel_region_lmem.c.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112172246.11933-1-jani.nikula@intel.com

There are no users outside of intel_memory_region.c.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112170429.27619-1-jani.nikula@intel.com

During igt_reset_nop_engine, it was observed that an unexpected failed
engine reset lead to us busywaiting on the stop-ring semaphore (set
during the reset preparations) on the first request afterwards. There was
no explicit MI_ARB_CHECK in this sequence as the presumption was that
the failed MI_SEMAPHORE_WAIT would itself act as an arbitration point.
It did not in this circumstance, so force it.

This patch is based on the assumption that the MI_SEMAPHORE_WAIT failure
to arbitrate is a rare Tigerlake bug, similar to the lite-restore vs
semaphore issues previously seen in the CS. The explicit MI_ARB_CHECK
should always ensure that there is at least one arbitration point in the
request before the MI_SEMAPHORE_WAIT to trigger the IDLE->ACTIVE event.
Upon processing that event, we will clear the stop-ring flag and release
the semaphore from its busywait.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112100759.32698-2-chris@chris-wilson.co.uk

On the off chance that we need to arbitrate before launching the
payload, perform the check after we signal the request is ready to
start. Assuming instantaneous processing of the CS event, the request
will then be treated as having started when we make the decisions as to
how to process that CS event.

v2: More commentary about the users of i915_request_started() as a
reminder about why we are marking the initial breadcrumb.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112100759.32698-1-chris@chris-wilson.co.uk

A new fi-cml-dallium CI machine has 8G and apparently plenty free, yet
fails some selftests with ENOMEM. The failures all seem to be from
huge_gem_object which does not try very hard to allocate memory,
skipping reclaim entirely. Let's try a bit harder and direct reclaim
before failing.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112020013.19464-1-chris@chris-wilson.co.uk

If this stolen object holds the last reference to the region, we need to
remove our drm_mm_node before freeing the region's drm_mm.

<4> [431.679591] Memory manager not clean during takedown.
<4> [431.679633] WARNING: CPU: 0 PID: 110 at drivers/gpu/drm/drm_mm.c:999 drm_mm_takedown+0x51/0x100
<4> [431.679655] Modules linked in: i915 vgem btusb snd_hda_codec_hdmi btrtl btbcm btintel snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio bluetooth coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ecdh_generic ecc r8169 realtek lpc_ich snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm pinctrl_cherryview prime_numbers [last unloaded: i915]
<4> [431.679883] CPU: 0 PID: 110 Comm: kworker/u4:3 Tainted: G     U            5.11.0-rc3-CI-CI_DRM_9583+ #1
<4> [431.679895] Hardware name:  /NUC5CPYB, BIOS PYBSWCEL.86A.0058.2016.1102.1842 11/02/2016
<4> [431.679905] Workqueue: i915 __i915_gem_free_work [i915]
<4> [431.680831] RIP: 0010:drm_mm_takedown+0x51/0x100
<4> [431.680850] Code: 44 24 08 65 48 33 04 25 28 00 00 00 0f 85 b6 00 00 00 48 83 c4 10 5b 5d 41 5c c3 48 89 fb 48 c7 c7 c8 b7 38 82 e8 00 d6 37 00 <0f> 0b 48 8b 3d 96 d5 d1 00 ba 00 10 00 00 be c0 0c 00 00 e8 d7 64
<4> [431.680862] RSP: 0018:ffffc90000ad7dc0 EFLAGS: 00010282
<4> [431.680879] RAX: 0000000000000000 RBX: ffff8881109aa140 RCX: 0000000000000001
<4> [431.680888] RDX: 0000000080000001 RSI: ffffffff8235a70f RDI: 00000000ffffffff
<4> [431.680897] RBP: ffff8881109aa178 R08: 0000000000000001 R09: 0000000000000001
<4> [431.680906] R10: 0000000025eaec48 R11: 00000000f5b271a7 R12: ffff88810a38ddc0
<4> [431.680916] R13: 00000000ffffffff R14: ffffffff82861b70 R15: ffff88810b715538
<4> [431.680925] FS:  0000000000000000(0000) GS:ffff88817b800000(0000) knlGS:0000000000000000
<4> [431.680935] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [431.680945] CR2: 000056377cfd7c48 CR3: 00000001045de000 CR4: 00000000001006f0
<4> [431.680954] Call Trace:
<4> [431.680977]  __intel_memory_region_destroy+0x24/0x50 [i915]
<4> [431.681340]  i915_gem_object_release_stolen+0x26/0x40 [i915]
<4> [431.681637]  __i915_gem_free_objects.isra.21+0x1ef/0x3b0 [i915]
<4> [431.681935]  process_one_work+0x270/0x5c0
<4> [431.682022]  worker_thread+0x37/0x380
<4> [431.682047]  ? process_one_work+0x5c0/0x5c0
<4> [431.682062]  kthread+0x146/0x170
<4> [431.682077]  ? kthread_park+0x80/0x80
<4> [431.682098]  ret_from_fork+0x22/0x30
<4> [431.682153] irq event stamp: 1872905
<4> [431.682162] hardirqs last  enabled at (1872911): [<ffffffff8112bd9a>] console_unlock+0x49a/0x580
<4> [431.682176] hardirqs last disabled at (1872916): [<ffffffff8112bd06>] console_unlock+0x406/0x580
<4> [431.682187] softirqs last  enabled at (1872850): [<ffffffff81e00342>] __do_softirq+0x342/0x48e
<4> [431.682201] softirqs last disabled at (1872845): [<ffffffff81c00f52>] asm_call_irq_on_stack+0x12/0x20
<4> [431.682214] ---[ end trace 5d3bcd818e2e3816 ]---
<3> [431.686188] [drm:drm_mm_takedown] *ERROR* node [0002d000 + 00004000]: inserted at
 drm_mm_insert_node_in_range+0x34a/0x5b0
 i915_gem_stolen_insert_node_in_range+0x7b/0xa0 [i915]
 _i915_gem_object_create_stolen+0x83/0xd0 [i915]
 i915_gem_object_create_region+0x61/0x140 [i915]
 intel_engine_create_ring+0x176/0x230 [i915]

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2927Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112015000.16108-1-chris@chris-wilson.co.uk

The clear-residuals mitigation is a relatively heavy hammer and under some
circumstances the user may wish to forgo the context isolation in order
to meet some performance requirement. Introduce a generic module
parameter to allow selectively enabling/disabling different mitigations.

To disable just the clear-residuals mitigation (on Ivybridge, Baytrail,
or Haswell) use the module parameter: i915.mitigations=auto,!residuals

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858
Fixes: 47f8253d ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: NJon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk

The mitigation is required for all gen7 platforms, now that it does not
cause GPU hangs, restore it for Ivybridge and Baytrail.

Fixes: 47f8253d ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Reviewed-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-2-chris@chris-wilson.co.uk

MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the
range [0, n-1] where n is #EU * (#threads/EU) with the number of threads
based on plaform and the number of EU based on the number of slices and
subslices. This is a fixed number per platform/gt, so appropriately
limit the number of threads we spawn to match the device.

v2: Oversaturate the system with tasks to force execution on every HW
thread; if the thread idles it is returned to the pool and may be reused
again before an unused thread.

v3: Fix more state commands, which was causing Baytrail to barf.
v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024
Fixes: 47f8253d ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Randy Wright <rwright@hpe.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk

DG1's vswing tables are the same for eDP and HDMI but have slight
differences from ICL/TGL for DP.

v2:
 - Use a "_hbr2_hbr3" suffix on the table name to make it more clear
   that the same table is used for both HBR2 and HBR3 link rates.
   (Swathi)

Bspec: 49291
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108222528.1954514-1-matthew.d.roper@intel.comReviewed-by: NClint Taylor <Clinton.A.Taylor@intel.com>

During igt_reset_nop_engine, an engine reset unexpectedly failed. For the
next time this happens, mention which engine that was.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111105735.21515-4-chris@chris-wilson.co.uk

Braswell's pdp workaround is full of dragons, that may be being angered
when they are interrupted. Let's not take that risk and disable
arbitration during the update.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111105735.21515-1-chris@chris-wilson.co.uk

Some new eDP panels don't like to operate at the max parameters, and
instead we need to go for an optimal confiugration. That unfortunately
doesn't work with older eDP panels which are generally only guaranteed
to work at the max parameters.

To solve these two conflicting requirements let's start with the optimal
setup, and if that fails we start again with the max parameters. The
downside is probably an extra modeset when we switch strategies but
I don't see a good way to avoid that.

For a bit of history we first tried to go for the fast+narrow in
commit 7769db58 ("drm/i915/dp: optimize eDP 1.4+ link config
fast and narrow"). but that had to be reverted due to regression
on older panels in commit f11cb1c1 ("drm/i915/dp: revert back
to max link rate and lane count on eDP"). So now we try to get
the best of both worlds by using both strategies.

v2: Deal with output_bpp and uapi vs. hw state split
    Reword some comments
v3: Rebase

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Cc: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Cc: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=105267
References: https://bugs.freedesktop.org/show_bug.cgi?id=109959
References: https://gitlab.freedesktop.org/drm/intel/issues/272Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107182026.24848-1-ville.syrjala@linux.intel.com

Eliminate checkpatch warnings from intel_cursor.c:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Possible repeated word: 'by'
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110175624.3524-2-ville.syrjala@linux.intel.comReviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>

There was some misinterpretation of specification, when DDIX_USED is
set, the next bit means 0 for DP and 1 for HDMI.

Anyways this misinterpretation is not causing any issues, this change
is just to comply with specification.
Also as for us it do not matters if it is HDMI or DP, not checking the
port type that HTI is using.

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108134802.21280-1-jose.souza@intel.com

These error paths return success instead of negative error codes as
intended.

Fixes: c92724de ("drm/i915/selftests: Try to detect rollback during batchbuffer preemption")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/X/xMdcewtft7+QFM@mwanda

The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.

The CPU mode takeover code added in commit 5b1ec9ac
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".

This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.

Fixes: 5b1ec9ac ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com

When wedging the device, we cancel all outstanding requests and mark
them as EIO. Rather than duplicate the small function to do so between
each submission backend, export one.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: NAndi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109163455.28466-3-chris@chris-wilson.co.uk

drivers/gpu/drm/i915//gt/intel_workarounds.c:1394:20: error: function 'is_nonpriv_flags_valid' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static inline bool is_nonpriv_flags_valid(u32 flags)

This is only used by debug build, so mark it as maybe-unused to keep the
compiler from complaining.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NAndi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109163455.28466-2-chris@chris-wilson.co.uk

>> drivers/gpu/drm/i915/gt/intel_lrc.c:17:28: error: unused function 'dword_in_page' [-Werror,-Wunused-function]
   static inline unsigned int dword_in_page(void *addr)
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NAndi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109163455.28466-1-chris@chris-wilson.co.uk