comp_algorithm_store() passes the size of the source buffer to strlcpy()
instead of the destination buffer size.  Make it explicit that the two
buffers have the same size and use strcpy() instead of strlcpy().  The
latter can be done safely since the function ensures that the string in
the source buffer is terminated.

Link: http://lkml.kernel.org/r/20170803163350.45245-1-mka@chromium.orgSigned-off-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Geneve's Virtual Network Identifier (VNI) is 24 bit long, so the range
of values for it would be from 0 to 16777215 (2^24 -1).  However, one
cannot create a geneve device with VNI set to 16777215. This patch fixes
this issue.
Signed-off-by: NGirish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With SYSTEMPORT Lite we have holes in our statistics layout that make us
skip over the hardware MIB counters, bcm_sysport_get_stats() was not
taking that into account resulting in reporting 0 for all SW-maintained
statistics, fix this by skipping accordingly.

Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using mpgroup to define multiple paths for a virtual disk causes multiple
virtual-device-port ports to be created for that virtual device.
Each virtual-device-port port then gets a vdisk created for it by the Linux
sunvdc driver. As mpgroup is not supported by the Linux sunvdc driver it
cannot handle multiple ports for a single vdisk, leading to a kernel panic
at startup.

This fix prevents more than one vdisk per virtual-device-port being created
until full virtual disk multipathing (mpgroup) support is implemented.
Signed-off-by: NJim Quigley <Jim.Quigley@oracle.com>
Reviewed-by: NLiam Merwick <liam.merwick@oracle.com>
Reviewed-by: NShannon Nelson <shannon.nelson@oracle.com>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: NAaron Young <aaron.young@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes hitting WARN_ON() during initialisation of pre-NV50 GPUs, caused
by the recent changes to support pad macro routing on GM20x.

We currently don't use them here for older GPUs anyway.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Default config value for all other drivers is N.
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NDave Airlie <airlied@redhat.com>

qmi_wwan_disconnect is called twice when disconnecting devices with
separate control and data interfaces.  The first invocation will set
the interface data to NULL for both interfaces to flag that the
disconnect has been handled.  But the matching NULL check was left
out when qmi_wwan_disconnect was added, resulting in this oops:

  usb 2-1.4: USB disconnect, device number 4
  qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device
  BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0
  IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan]
  PGD 0
  P4D 0
  Oops: 0000 [#1] SMP
  Modules linked in: <stripped irrelevant module list>
  CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G            E   4.12.3-nr44-normandy-r1500619820+ #1
  Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017
  Workqueue: usb_hub_wq hub_event [usbcore]
  task: ffff8c882b716040 task.stack: ffffb8e800d84000
  RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan]
  RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400
  RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000
  R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8
  R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0
  Call Trace:
   ? usb_unbind_interface+0x71/0x270 [usbcore]
   ? device_release_driver_internal+0x154/0x210
   ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan]
   ? usbnet_disconnect+0x6c/0xf0 [usbnet]
   ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan]
   ? usb_unbind_interface+0x71/0x270 [usbcore]
   ? device_release_driver_internal+0x154/0x210
Reported-and-tested-by: NNathaniel Roach <nroach44@gmail.com>
Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp
devices") dropped the xmit_recursion counter incrementation in
ppp_channel_push() and relied on ppp_xmit_process() for this task.
But __ppp_channel_push() can also send packets directly (using the
.start_xmit() channel callback), in which case the xmit_recursion
counter isn't incremented anymore. If such packets get routed back to
the parent ppp unit, ppp_xmit_process() won't notice the recursion and
will call ppp_channel_push() on the same channel, effectively creating
the deadlock situation that the xmit_recursion mechanism was supposed
to prevent.

This patch re-introduces the xmit_recursion counter incrementation in
ppp_channel_push(). Since the xmit_recursion variable is now part of
the parent ppp unit, incrementation is skipped if the channel doesn't
have any. This is fine because only packets routed through the parent
unit may enter the channel recursively.

Finally, we have to ensure that pch->ppp is not going to be modified
while executing ppp_channel_push(). Instead of taking this lock only
while calling ppp_xmit_process(), we now have to hold it for the full
ppp_channel_push() execution. This respects the ppp locks ordering
which requires locking ->upl before ->downl.

Fixes: e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Manually adjust the port settings of user ports once PHY polling has
completed. This patch extends the adjust_link callback to configure the
per port PMCR register, applying the proper values polled from the PHY.
Without this patch flow control was not always getting setup properly.
Signed-off-by: NShashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: NMuciri Gatimu <muciri@openmesh.com>
Signed-off-by: NJohn Crispin <john@phrozen.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

if the NIC fails to validate the checksum on TCP/UDP, and validation of IP
checksum is successful, the driver subtracts the pseudo-header checksum
from the value obtained by the hardware and sets CHECKSUM_COMPLETE. Don't
do that if protocol is IPPROTO_SCTP, otherwise CRC32c validation fails.

V2: don't test MLX4_CQE_STATUS_IPV6 if MLX4_CQE_STATUS_IPV4 is set
Reported-by: NShuang Li <shuali@redhat.com>
Fixes: f8c6455b ("net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE")
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a check if the framebuffer described by the provided drm_mode_fb_cmd2
structure fits into provided GEM buffers. Without this check it is
possible to create a framebuffer object from a small buffer and set it to
the hardware, what results in displaying system memory outside the
allocated GEM buffer.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fix the warning message on the parisc and IA64 architectures to show the
correct function name of the caller by using %pS instead of %pF. The
message is printed with the value of _RET_IP_ which calls
__builtin_return_address(0) and as such returns the IP address caller
instead of pointer to a function descriptor of the caller.

The effect of this patch is visible on the parisc and ia64 architectures
only since those are the ones which use function descriptors while on
all others %pS and %pF will behave the same.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NHelge Deller <deller@gmx.de>
Fixes: eecabf56 ("random: suppress spammy warnings about unseeded randomness")
Fixes: d06bfd19 ("random: warn when kernel uses unseeded randomness")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A relocation pointing to the last four bytes of a buffer can
legitimately happen in the case of small vertex buffers.

CC: stable@vger.kernel.org #4.9+
Signed-off-by: NWladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>

We allocate 'p_info->mfw_mb_cur' and 'p_info->mfw_mb_shadow' but we check
'p_info->mfw_mb_addr' instead of 'p_info->mfw_mb_cur'.

'p_info->mfw_mb_addr' is never 0, because it is initiliazed a few lines
above in 'qed_load_mcp_offsets()'.

Update the test and check the result of the 2 'kzalloc()' instead.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: NTomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The synchronization type that was used earlier to guard the loop that
deletes unused log buffers may lead to a situation that prevents any
thread from going through the loop.

The patch deletes previously used synchronization mechanism and moves
the loop under the spin_lock so the similar cases won't be feasible in
the future.

Found by by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAnton Volkov <avolkov@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On L3, the qeth_hdr struct needs to be filled with the next-hop
IP address.
The current code accesses rtable->rt_gateway without checking that
rtable is a valid address. The accidental access to a lowcore area
results in a random next-hop address in the qeth_hdr.
rtable (or more precisely, skb_dst(skb)) can be NULL in rare cases
(for instance together with AF_PACKET sockets).
This patch adds the missing NULL-ptr checks.
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Fixes: 87e7597b qeth: Move away from using neighbour entries in qeth_l3_fill_header()
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When Ethernet frames span mulitple URBs, the netdev buffer memory
pointed to by the asix_rx_fixup_info structure remains allocated
during the time gap between the 2 executions of asix_rx_fixup_internal().

This means that if ax88772_unbind() is called within this time
gap to free the memory of the parent private data structure then
a memory leak of the part filled netdev buffer memory will occur.

Therefore, create a new function asix_rx_fixup_common_free() to
free the memory of the netdev buffer and add a call to
asix_rx_fixup_common_free() from inside ax88772_unbind().

Consequently when an unbind occurs part way through receiving
an Ethernet frame, the netdev buffer memory that is holding part
of the received Ethernet frame will now be freed.
Signed-off-by: NDean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a risk that the members of the structure asix_rx_fixup_info
become unsynchronised leading to the possibility of a malfunction.

For example, rx->split_head was not being set to false after an
error was detected so potentially could cause a malformed 32-bit
Data header word to be formed.

Therefore add function reset_asix_rx_fixup_info() to reset all the
members of asix_rx_fixup_info so that future processing will start
with known initial conditions.

Also, if (skb->len != offset) becomes true then call
reset_asix_rx_fixup_info() so that the processing of the next URB
starts with known initial conditions. Without the call, the check
does nothing which potentially could lead to a malfunction
when the next URB is processed.

In addition, for robustness, call reset_asix_rx_fixup_info() before
every error path's "return 0". This ensures that the next URB is
processed from known initial conditions.
Signed-off-by: NDean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In asix_rx_fixup_internal() there is a risk that rx->ax_skb gets
reused after passing the Ethernet frame into the network stack via
usbnet_skb_return().

The risks include:

a) asynchronously freeing rx->ax_skb after passing the netdev buffer
   to the NAPI layer which might corrupt the backlog queue.

b) erroneously reusing rx->ax_skb such as calling skb_put_data() multiple
   times which causes writing off the end of the netdev buffer.

Therefore add a defensive rx->ax_skb = NULL after usbnet_skb_return()
so that it is not possible to free rx->ax_skb or to apply
skb_put_data() too many times.
Signed-off-by: NDean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

UART pin lists consist GPIO numbers which is simply wrong.
Replace it by pin numbers.

Fixes: 4e80c8f5 ("pinctrl: intel: Add Intel Merrifield pin controller support")
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

On the south bridge we have pin from to 29, so it gives 30 pins (and not
29).

Without this patch the kernel complain with the following traces:
cat /sys/kernel/debug/pinctrl/d0018800.pinctrl/pingroups
[  154.530205] armada-37xx-pinctrl d0018800.pinctrl: failed to get pin(29) name
[  154.537567] ------------[ cut here ]------------
[  154.542348] WARNING: CPU: 1 PID: 1347 at /home/gclement/open/kernel/marvell-mainline-linux/drivers/pinctrl/core.c:1610 pinctrl_groups_show+0x15c/0x1a0
[  154.555918] Modules linked in:
[  154.558890] CPU: 1 PID: 1347 Comm: cat Tainted: G        W       4.13.0-rc1-00001-g19e1b9fa219d #525
[  154.568316] Hardware name: Marvell Armada 3720 Development Board DB-88F3720-DDR3 (DT)
[  154.576311] task: ffff80001d32d100 task.stack: ffff80001bdc0000
[  154.583048] PC is at pinctrl_groups_show+0x15c/0x1a0
[  154.587816] LR is at pinctrl_groups_show+0x148/0x1a0
[  154.592847] pc : [<ffff0000083e3adc>] lr : [<ffff0000083e3ac8>] pstate: 00000145
[  154.600840] sp : ffff80001bdc3c80
[  154.604255] x29: ffff80001bdc3c80 x28: 00000000f7750000
[  154.609825] x27: ffff80001d05d198 x26: 0000000000000009
[  154.615224] x25: ffff0000089ead20 x24: 0000000000000002
[  154.620705] x23: ffff000008c8e1d0 x22: ffff80001be55700
[  154.626187] x21: ffff80001d05d100 x20: 0000000000000005
[  154.631667] x19: 0000000000000006 x18: 0000000000000010
[  154.637238] x17: 0000000000000000 x16: ffff0000081fc4b8
[  154.642726] x15: 0000000000000006 x14: ffff0000899e537f
[  154.648214] x13: ffff0000099e538d x12: 206f742064656c69
[  154.653613] x11: 6166203a6c727463 x10: 0000000005f5e0ff
[  154.659094] x9 : ffff80001bdc38c0 x8 : 286e697020746567
[  154.664576] x7 : ffff000008551870 x6 : 000000000000011b
[  154.670146] x5 : 0000000000000000 x4 : 0000000000000000
[  154.675544] x3 : 0000000000000000 x2 : 0000000000000000
[  154.681025] x1 : ffff000008c8e1d0 x0 : ffff80001be55700
[  154.686507] Call trace:
[  154.688668] Exception stack(0xffff80001bdc3ab0 to 0xffff80001bdc3be0)
[  154.695224] 3aa0:                                   0000000000000006 0001000000000000
[  154.703310] 3ac0: ffff80001bdc3c80 ffff0000083e3adc ffff80001bdc3bb0 00000000ffffffd8
[  154.711304] 3ae0: 4554535953425553 6f6674616c703d4d 4349564544006d72 6674616c702b3d45
[  154.719478] 3b00: 313030643a6d726f 6e69702e30303838 ffff80006c727463 ffff0000089635d8
[  154.727562] 3b20: ffff80001d1ca0cb ffff000008af0fa4 ffff80001bdc3b40 ffff000008c8e1dc
[  154.735648] 3b40: ffff80001bdc3bc0 ffff000008223174 ffff80001be55700 ffff000008c8e1d0
[  154.743731] 3b60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  154.752354] 3b80: 000000000000011b ffff000008551870 286e697020746567 ffff80001bdc38c0
[  154.760446] 3ba0: 0000000005f5e0ff 6166203a6c727463 206f742064656c69 ffff0000099e538d
[  154.767910] 3bc0: ffff0000899e537f 0000000000000006 ffff0000081fc4b8 0000000000000000
[  154.776085] [<ffff0000083e3adc>] pinctrl_groups_show+0x15c/0x1a0
[  154.782823] [<ffff000008222abc>] seq_read+0x184/0x460
[  154.787505] [<ffff000008344120>] full_proxy_read+0x60/0xa8
[  154.793431] [<ffff0000081f9bec>] __vfs_read+0x1c/0x110
[  154.799001] [<ffff0000081faff4>] vfs_read+0x84/0x140
[  154.803860] [<ffff0000081fc4fc>] SyS_read+0x44/0xa0
[  154.808983] [<ffff000008082f30>] el0_svc_naked+0x24/0x28
[  154.814459] ---[ end trace 4cbb00a92d616b95 ]---

Cc: stable@vger.kernel.org
Fixes: 87466ccd ("pinctrl: armada-37xx: Add pin controller support
for Armada 37xx")
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Pin 23 on South bridge does not belong to the rgmii group. It belongs to
a separate group which can have 3 functions.

Due to this the fix also have to update the way the functions are
managed. Until now each groups used NB_FUNCS(which was 2) functions. For
the mpp23, 3 functions are available but it is the only group which needs
it, so on the loop involving NB_FUNCS an extra test was added to handle
only the functions added.

The bug was visible with the merge of the commit 07d065ab "arm64:
dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot", the gpio
regulator used the gpio 23, due to this the whole rgmii group was setup
to gpio which broke the Ethernet support on the Armada 3720 DB
board. Thanks to this patch, the UHS SD cards (which need the vqmmc)
_and_ the Ethernet work again.

Cc: stable@vger.kernel.org
Fixes: 87466ccd ("pinctrl: armada-37xx: Add pin controller support
for Armada 37xx")
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When we started following the backlight minimum brightness in
6dda730e ("drm/i915: respect the VBT minimum backlight brightness")
we overlooked the brightness invert quirk. Even if we invert the
brightness, we need to take the min limit into account. We probably
missed this because the invert has only been required on gen4 for proper
operation.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101127
Fixes: 6dda730e ("drm/i915: respect the VBT minimum backlight brightness")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170531083355.7898-1-jani.nikula@intel.com
(cherry picked from commit e9d7486e)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

In order for us to successfully detect the end of a timeslice,
preemption must be disabled. Otherwise, inside the loop we may be
preempted many times without our noticing, and each time our timeslice
will be reset, invalidating need_resched()
Reported-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reported-by: NTomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: 290271de ("drm/i915: Spin for struct_mutex inside shrinker")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Link: https://patchwork.freedesktop.org/patch/msgid/20170804104135.26805-1-chris@chris-wilson.co.ukTested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 6cb0c6ad)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We were reserving fewer dwords in the ring than necessary. Indeed
we're always writing all registers once, so discard the actual number
of registers given by the user and just program the whitelisted ones
once.

Fixes: 19f81df2 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reported-by: NMatthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-6-lionel.g.landwerlin@intel.com
(cherry picked from commit 01d928e9)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

bdw_load_gamma_lut is writing beyond the array to the maximum value.
The intend of the function is to clamp values > 1 to 1, so write
the intended color to the max register.

This fixes the following KASAN warning:

[  197.020857] [IGT] kms_pipe_color: executing
[  197.063434] [IGT] kms_pipe_color: starting subtest ctm-0-25-pipe0
[  197.078989] ==================================================================
[  197.079127] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[  197.079188] Read of size 2 at addr ffff8800d38db150 by task kms_pipe_color/1839
[  197.079208] CPU: 2 PID: 1839 Comm: kms_pipe_color Tainted: G     U 4.13.0-rc1-patser+ #5211
[  197.079215] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015
[  197.079220] Call Trace:
[  197.079230]  dump_stack+0x68/0x9e
[  197.079239]  print_address_description+0x6f/0x250
[  197.079251]  kasan_report+0x216/0x370
[  197.079374]  ? bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[  197.079451]  ? gen8_write16+0x4e0/0x4e0 [i915]
[  197.079460]  __asan_report_load2_noabort+0x14/0x20
[  197.079535]  bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[  197.079612]  broadwell_load_luts+0x1df/0x550 [i915]
[  197.079690]  intel_color_load_luts+0x7b/0x80 [i915]
[  197.079764]  intel_begin_crtc_commit+0x138/0x760 [i915]
[  197.079783]  drm_atomic_helper_commit_planes_on_crtc+0x1a3/0x820 [drm_kms_helper]
[  197.079859]  ? intel_pre_plane_update+0x571/0x580 [i915]
[  197.079937]  intel_update_crtc+0x238/0x330 [i915]
[  197.080016]  intel_update_crtcs+0x10f/0x210 [i915]
[  197.080092]  intel_atomic_commit_tail+0x1552/0x3340 [i915]
[  197.080101]  ? _raw_spin_unlock+0x3c/0x40
[  197.080110]  ? __queue_work+0xb40/0xbf0
[  197.080188]  ? skl_update_crtcs+0xc00/0xc00 [i915]
[  197.080195]  ? trace_hardirqs_on+0xd/0x10
[  197.080269]  ? intel_atomic_commit_ready+0x128/0x13c [i915]
[  197.080329]  ? __i915_sw_fence_complete+0x5b8/0x6d0 [i915]
[  197.080336]  ? debug_object_activate+0x39e/0x580
[  197.080397]  ? i915_sw_fence_await+0x30/0x30 [i915]
[  197.080409]  ? __might_sleep+0x15b/0x180
[  197.080483]  intel_atomic_commit+0x944/0xa70 [i915]
[  197.080490]  ? refcount_dec_and_test+0x11/0x20
[  197.080567]  ? intel_atomic_commit_tail+0x3340/0x3340 [i915]
[  197.080597]  ? drm_atomic_crtc_set_property+0x303/0x580 [drm]
[  197.080674]  ? intel_atomic_commit_tail+0x3340/0x3340 [i915]
[  197.080704]  drm_atomic_commit+0xd7/0xe0 [drm]
[  197.080722]  drm_atomic_helper_crtc_set_property+0xec/0x130 [drm_kms_helper]
[  197.080749]  drm_mode_crtc_set_obj_prop+0x7d/0xb0 [drm]
[  197.080775]  drm_mode_obj_set_property_ioctl+0x50b/0x5d0 [drm]
[  197.080783]  ? __might_fault+0x104/0x180
[  197.080809]  ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[  197.080838]  ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[  197.080861]  drm_ioctl_kernel+0x154/0x1a0 [drm]
[  197.080885]  drm_ioctl+0x624/0x8f0 [drm]
[  197.080910]  ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[  197.080934]  ? drm_getunique+0x210/0x210 [drm]
[  197.080943]  ? __handle_mm_fault+0x1bd0/0x1ce0
[  197.080949]  ? lock_downgrade+0x610/0x610
[  197.080957]  ? __lru_cache_add+0x15a/0x180
[  197.080967]  do_vfs_ioctl+0xd92/0xe40
[  197.080975]  ? ioctl_preallocate+0x1b0/0x1b0
[  197.080982]  ? selinux_capable+0x20/0x20
[  197.080991]  ? __do_page_fault+0x7b7/0x9a0
[  197.080997]  ? lock_downgrade+0x5bb/0x610
[  197.081007]  ? security_file_ioctl+0x57/0x90
[  197.081016]  SyS_ioctl+0x4e/0x80
[  197.081024]  entry_SYSCALL_64_fastpath+0x18/0xad
[  197.081030] RIP: 0033:0x7f61f287a987
[  197.081035] RSP: 002b:00007fff7d44d188 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  197.081043] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f61f287a987
[  197.081048] RDX: 00007fff7d44d1c0 RSI: 00000000c01864ba RDI: 0000000000000003
[  197.081053] RBP: 00007f61f2b3eb00 R08: 0000000000000059 R09: 0000000000000000
[  197.081058] R10: 0000002ea5c4a290 R11: 0000000000000246 R12: 00007f61f2b3eb58
[  197.081063] R13: 0000000000001010 R14: 00007f61f2b3eb58 R15: 0000000000002702

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101659Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: NMartin Peres <martin.peres@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Fixes: 82cf435b ("drm/i915: Implement color management on bdw/skl/bxt/kbl")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Kiran S Kumar <kiran.s.kumar@intel.com>
Cc: Kausal Malladi <kausalmalladi@gmail.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20170724091431.24251-1-maarten.lankhorst@linux.intel.comReviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit 09a92bc8)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

When linux guest access mmio with __raw_i915_read64 or __raw_i915_write64,
its length is 8 bytes.

This fix the linux guest in xengt couldn't boot up as it fail in
reading pv_info->magic.

Fixes: 65f9f6fe ("drm/i915/gvt: Optimize MMIO register handling for some large MMIO blocks")
Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The existing sub channel code did not wait for all the sub-channels
to completely initialize. This could lead to race causing crash
in napi_netif_del() from bad list. The existing code would send
an init message, then wait only for the initial response that
the init message was received. It thought it was waiting for
sub channels but really the init response did the wakeup.

The new code keeps track of the number of open channels and
waits until that many are open.

Other issues here were:
  * host might return less sub-channels than was requested.
  * the new init status is not valid until after init was completed.

Fixes: b3e6b82a ("hv_netvsc: Wait for sub-channels to be processed during probe")
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a problem where the system gets stuck in a loop
unable to wakeup via power button in s2idle.

The problem happens because:
 - press power button:
   - system emits 0xc0 (power press), event ignored
   - system emits 0xc1 (power release), event processed,
     emited as KEY_POWER
   - set wakeup_mode to true
   - system goes to s2idle
 - press power button
   - system emits 0xc0 (power press), wakeup_mode is true,
     system wakes
   - system emits 0xc1 (power release), event processed,
     emited as KEY_POWER
   - system goes to s2idle again

To avoid this situation, process the presses (which matches what
intel-hid does too).

Verified on an Dell XPS 9365
Signed-off-by: NMario Limonciello <mario.limonciello@dell.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

The hns_roce_v1_create_lp_qp() returns NULL on error, not error pointers.

Fixes: bfcc681b ("IB/hns: Fix the bug when free mr")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Even the driver doesn't do anything with the clk source for SGMII
ports it needs to be enabled by doing a devm_clk_get(), if there is
a clk source in DT.

Fixes: 0db01097 ('xgene: Don't fail probe, if there is no clk resource for SGMII interfaces')
Signed-off-by: NThomas Bogendoerfer <tbogendoerfer@suse.de>
Tested-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NIyappan Subramanian <isubramanian@apm.com>
Tested-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The extended address vector is the highest bit in be32 variable,
but it was compared with the lowest. This patch fixes the endianness
of that check and removes already declared define.

Fixes: 17d2f88f ("IB/mlx5: Add ODP atomics support")
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Uverbs device should be cleaned up only when there is no
potential usage of.

As part of ib_uverbs_remove_one which might be triggered upon reset flow
the device reference count is decreased as expected and leave the final
cleanup to the FDs that were opened.

Current code increases reference count upon opening a new command FD and
decreases it upon closing the file. The event FD is opened internally
and rely on the command FD by taking on it a reference count.

In case that the command FD was closed and just later the event FD we
may ensure that the device resources as of srcu are still alive as they
are still in use.

Fixing the above by moving the reference count decreasing to the place
where the command FD is really freed instead of doing that when it was
just closed.

fixes: 036b1063 ("IB/uverbs: Enable device removal when there are active user space applications")
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

initialize to zero the response structure to prevent
the leakage of "resp.reserved" field.

drivers/infiniband/core/uverbs_cmd.c:1178 ib_uverbs_resize_cq() warn:
	check that 'resp.reserved' doesn't leak information

Fixes: 33b9b3ee ("IB: Add userspace support for resizing CQs")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently while resolving IP address to MAC address single delayed work
is used for resolving multiple such resolve requests. This singled work
is essentially performs two tasks.
(a) any retry needed to resolve and
(b) it executes the callback function for all completed requests

While work is executing callbacks, any new work scheduled on for this
workqueue is lost because workqueue has completed looking at all pending
requests and now looking at callbacks, but work is still under
execution. Any further retry to look at pending requests in
process_req() after executing callbacks would lead to similar race
condition (may be reduce the probably further but doesn't eliminate it).
Retrying to enqueue work that from queue_req() context is not something
rest of the kernel modules have followed.

Therefore fix in this patch utilizes kernel facility to enqueue multiple
work items to a workqueue. This ensures that no such requests
gets lost in synchronization. Request list is still maintained so that
rdma_cancel_addr() can unlink the request and get the completion with
error sooner. Neighbour update event handling continues to be handled in
same way as before.
Additionally process_req() work entry cancels any pending work for a
request that gets completed while processing those requests.

Originally ib_addr was ST workqueue, but it became MT work queue with
patch of [1]. This patch again makes it similar to ST so that
neighbour update events handler work item doesn't race with
other work items.

In one such below trace, (though on 4.5 based kernel) it can be seen
that process_req() never executed the callback, which is likely for an
event that was schedule by queue_req() when previous callback was
getting executed by workqueue.

 [<ffffffff816b0dde>] schedule+0x3e/0x90
 [<ffffffff816b3c45>] schedule_timeout+0x1b5/0x210
 [<ffffffff81618c37>] ? ip_route_output_flow+0x27/0x70
 [<ffffffffa027f9c9>] ? addr_resolve+0x149/0x1b0 [ib_addr]
 [<ffffffff816b228f>] wait_for_completion+0x10f/0x170
 [<ffffffff810b6140>] ? try_to_wake_up+0x210/0x210
 [<ffffffffa027f220>] ? rdma_copy_addr+0xa0/0xa0 [ib_addr]
 [<ffffffffa0280120>] rdma_addr_find_l2_eth_by_grh+0x1d0/0x278 [ib_addr]
 [<ffffffff81321297>] ? sub_alloc+0x77/0x1c0
 [<ffffffffa02943b7>] ib_init_ah_from_wc+0x3a7/0x5a0 [ib_core]
 [<ffffffffa0457aba>] cm_req_handler+0xea/0x580 [ib_cm]
 [<ffffffff81015982>] ? __switch_to+0x212/0x5e0
 [<ffffffffa04582fd>] cm_work_handler+0x6d/0x150 [ib_cm]
 [<ffffffff810a14c1>] process_one_work+0x151/0x4b0
 [<ffffffff810a1940>] worker_thread+0x120/0x480
 [<ffffffff816b074b>] ? __schedule+0x30b/0x890
 [<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0
 [<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0
 [<ffffffff810a6b1e>] kthread+0xce/0xf0
 [<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff816b53a2>] ret_from_fork+0x42/0x70
 [<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70
INFO: task kworker/u144:1:156520 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
kworker/u144:1  D ffff883ffe1d7600     0 156520      2 0x00000080
Workqueue: ib_addr process_req [ib_addr]
 ffff883f446fbbd8 0000000000000046 ffff881f95280000 ffff881ff24de200
 ffff883f66120000 ffff883f446f8008 ffff881f95280000 ffff883f6f9208c4
 ffff883f6f9208c8 00000000ffffffff ffff883f446fbbf8 ffffffff816b0dde

[1] http://lkml.iu.edu/hypermail/linux/kernel/1608.1/05834.htmlSigned-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Each multicast group (MID) stores a bitmap of ports to which a packet
should be forwarded to in case an MDB entry associated with the MID is
hit.

Since the initial introduction of IGMP snooping in commit 3a49b4fd
("mlxsw: Adding layer 2 multicast support") the driver didn't correctly
free these multicast groups upon ungraceful situations such as the
removal of the upper bridge device or module removal.

The correct way to fix this is to associate each MID with the bridge
ports member in it and then drop the reference in case the bridge port
is destroyed, but this will result in a lot more code and will be fixed
in net-next.

For now, upon module removal, traverse the MID list and release each
one.

Fixes: 3a49b4fd ("mlxsw: Adding layer 2 multicast support")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some operations in the bridge driver such as MDB deletion are preformed
in an atomic context and thus deferred to a process context by the
switchdev infrastructure.

Therefore, by the time the operation is performed by the underlying
device driver it's possible the bridge port context is already gone.
This is especially true for removal flows, but theoretically can also be
invoked during addition.

Remove the warnings in such situations and return normally.

Fixes: c57529e1 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Fixes: 3922285d ("net: bridge: Add support for offloading port attributes")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When resuming, set up registers that have been lost in the sleep state.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

MMIO block with tracked mmio, is introduced for the sake of performance
of searching tracked mmio. All the tracked mmio needs to get the initial
value from the HW state during vGPU being created. This patch is to
initialize the tracked registers in MMIO block with the HW state.

v2: Add "Fixes:" line for this patch (Zhenyu)

Fixes: 65f9f6fe ("drm/i915/gvt: Optimize MMIO register handling for some large MMIO blocks")
Signed-off-by: NTina Zhang <tina.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The user would be confused while facing a error commit without
any error report.
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
Reviewed-by: NSandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494596-7090-1-git-send-email-mark.yao@rock-chips.com