- 25 1月, 2008 4 次提交
-
-
由 Greg Kroah-Hartman 提交于
Now that the old kobject_add() function is gone, rename kobject_add_ng() to kobject_add() to clean up the namespace. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Neil Brown <neilb@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
This moves the block devices to /sys/class/block. It will create a flat list of all block devices, with the disks and partitions in one directory. For compatibility /sys/block is created and contains symlinks to the disks. /sys/class/block |-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda |-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1 |-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10 |-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5 |-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6 |-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7 |-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8 |-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9 `-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 /sys/block/ |-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda `-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Neil Brown <neilb@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 11月, 2007 1 次提交
-
-
由 Alan D. Brunelle 提交于
Added blk_unplug interface, allowing all invocations of unplugs to result in a generated blktrace UNPLUG. Signed-off-by: NAlan D. Brunelle <Alan.Brunelle@hp.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 20 10月, 2007 1 次提交
-
-
由 Pavel Emelyanov 提交于
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2007 3 次提交
-
-
由 Iustin Pop 提交于
The 'degraded' attribute is useful to quickly determine if the array is degraded, instead of parsing 'mdadm -D' output or relying on the other techniques (number of working devices against number of defined devices, etc.). The md code already keeps track of this attribute, so it's useful to export it. Signed-off-by: NIustin Pop <iusty@k1024.org> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
When an array is started read-only, MD_RECOVERY_NEEDED can be set but no recovery will be running. This causes 'sync_action' to report the wrong value. We could remove the test for MD_RECOVERY_NEEDED, but doing so would leave a small gap after requesting a sync action, where 'sync_action' would still report the old value. So make sure that for a read-only array, 'sync_action' always returns 'idle'. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael J. Evans 提交于
In current release kernels the md module (Software RAID) uses a static array (dev_t[128]) to store partition/device info temporarily for autostart. I discovered this (and that the devices are added as disks/partitions are discovered at boot) while I was debugging why only one of my MD arrays would come up whole, while all the others were short a disk. I eventually discovered that it was enumerating through all of 9 of my 11 hds (2 had only 4 partitions apiece) while the other 9 have 15 partitions (I wanted 64 per drive...). The last partition of the 8th drive in my 9 drive raid 5 sets wasn't added, thus making the final md array short both a parity and data disk, and it was started later, elsewhere. This patch replaces that static array with a list. [akpm@linux-foundation.org: removed unused var] Signed-off-by: NMichael J. Evans <mjevans1983@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 10月, 2007 1 次提交
-
-
由 Jens Axboe 提交于
Then we can get rid of ->issue_flush_fn() and all the driver private implementations of that. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 13 10月, 2007 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
A number of different drivers incorrect access the kobject name field directly. This is not correct as the name might not be in the array. Use the proper accessor function instead.
-
- 10 10月, 2007 1 次提交
-
-
由 NeilBrown 提交于
As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 24 7月, 2007 1 次提交
-
-
由 Jens Axboe 提交于
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 18 7月, 2007 5 次提交
-
-
由 NeilBrown 提交于
bitmap_unplug only ever returns 0, so it may as well be void. Two callers try to print a message if it returns non-zero, but that message is already printed by bitmap_file_kick. write_page returns an error which is not consistently checked. It always causes BITMAP_WRITE_ERROR to be set on an error, and that can more conveniently be checked. When the return of write_page is checked, an error causes bitmap_file_kick to be called - so move that call into write_page - and protect against recursive calls into bitmap_file_kick. bitmap_update_sb returns an error that is never checked. So make these 'void' and be consistent about checking the bit. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
We current completely trust user-space to set up metadata describing an consistant array. In particlar, that the metadata, data, and bitmap do not overlap. But userspace can be buggy, and it is better to report an error than corrupt data. So put in some appropriate checks. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
Don't use 'unsigned' variable to track sync vs non-sync IO, as the only thing we want to do with them is a signed comparison, and fix up the comment which had become quite wrong. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
People try to use raid auto-detect with version-1 superblocks (which is not supported) and get confused when they are told they have an invalid superblock. So be more explicit, and say it it is not a valid v0.90 superblock. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NNigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 7月, 2007 1 次提交
-
-
由 Dan Williams 提交于
The async_tx api tries to use a dma engine for an operation, but will fall back to an optimized software routine otherwise. Xor support is implemented using the raid5 xor routines. For organizational purposes this routine is moved to a common area. The following fixes are also made: * rename xor_block => xor_blocks, suggested by Adrian Bunk * ensure that xor.o initializes before md.o in the built-in case * checkpatch.pl fixes * mark calibrate_xor_blocks __init, Adrian Bunk Cc: Adrian Bunk <bunk@stusta.de> Cc: NeilBrown <neilb@suse.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 24 5月, 2007 1 次提交
-
-
由 NeilBrown 提交于
Adding a drive to a linear array seems to have stopped working, due to changes elsewhere in md, and insufficient ongoing testing... So the patch to make linear hot-add work in the first place introduced a subtle bug elsewhere that interracts poorly with older version of mdadm. This fixes it all up. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 5月, 2007 1 次提交
-
-
由 NeilBrown 提交于
During a 'resync' or similar activity, md checks if the devices in the array are otherwise active and winds back resync activity when they are. This test in done in is_mddev_idle, and it is somewhat fragile - it sometimes thinks there is non-sync io when there isn't. The test compares the total sectors of io (disk_stat_read) with the sectors of resync io (disk->sync_io). This has problems because total sectors gets updated when a request completes, while resync io gets updated when the request is submitted. The time difference can cause large differenced between the two which do not actually imply non-resync activity. The test currently allows for some fuzz (+/- 4096) but there are some cases when it is not enough. The test currently looks for any (non-fuzz) difference, either positive or negative. This clearly is not needed. Any non-sync activity will cause the total sectors to grow faster than the sync_io count (never slower) so we only need to look for a positive differences. If we do this then the amount of in-flight sync io will never cause the appearance of non-sync IO. Once enough non-sync IO to worry about starts happening, resync will be slowed down and the measurements will thus be more precise (as there is less in-flight) and control of resync will still be suitably responsive. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 5月, 2007 7 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 5b479c91. Quoth Neil Brown: "It causes an oops when auto-detecting raid arrays, and it doesn't seem easy to fix. The array may not be 'open' when do_md_run is called, so bdev->bd_disk might be NULL, so bd_set_size can oops. This whole approach of opening an md device before it has been assembled just seems to get more and more painful. I think I'm going to have to come up with something clever to provide both backward comparability with usage expectation, and sane integration into the rest of the kernel." Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
md currently uses ->media_changed to make sure rescan_partitions is call on md array after they are assembled. However that doesn't happen until the array is opened, which is later than some people would like. So use blkdev_ioctl to do the rescan immediately that the array has been assembled. This means we can remove all the ->change infrastructure as it was only used to trigger a partition rescan. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
"reshape_position" records how much progress has been made on a "reshape" (adding drives, changing layout or chunksize). When it is set, the number of drives, layout and chunksize can have two possible values, an old an a new. So allow these different values to be visible, and allow both old and new to be set: Set the old ones first, then the reshape_position, then the new values. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
If CONFIG_NET is not selected, csum_partial is not exported, so md.ko cannot use it. We shouldn't really be using csum_partial anyway as it is an internal-to-networking interface. So replace it with C code to do the same thing. Speed is not crucial here, so something simple and correct is best. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
We need to check for internal-consistency of superblock in load_super. validate_super is for inter-device consistency. With the test in the wrong place, a badly created array will confuse md rather an produce sensible errors. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Martin Peschke 提交于
We can save some lines of code by using seq_release_private(). Signed-off-by: NMartin Peschke <mp3@de.ibm.com> Acked-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ahmed S. Darwish 提交于
Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2007 1 次提交
-
-
由 Peter Zijlstra 提交于
Remove the destroy_dirty_buffers argument from invalidate_bdev(), it hasn't been used in 6 years (so akpm says). find * -name \*.[ch] | xargs grep -l invalidate_bdev | while read file; do quilt add $file; sed -ie 's/invalidate_bdev(\([^,]*\),[^)]*)/invalidate_bdev(\1)/g' $file; done Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 4月, 2007 1 次提交
-
-
由 NeilBrown 提交于
A device can be removed from an md array via e.g. echo remove > /sys/block/md3/md/dev-sde/state This will try to remove the 'dev-sde' subtree which will deadlock since commit e7b0d26a With this patch we run the kobject_del via schedule_work so as to avoid the deadlock. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 3月, 2007 2 次提交
-
-
由 NeilBrown 提交于
... still not sure why we need this .... Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
If this mddev and queue got reused for another array that doesn't register a congested_fn, this function would get called incorretly. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 3月, 2007 3 次提交
-
-
由 NeilBrown 提交于
An error always aborts any resync/recovery/reshape on the understanding that it will immediately be restarted if that still makes sense. However a reshape currently doesn't get restarted. With this patch it does. To avoid restarting when it is not possible to do work, we call into the personality to check that a reshape is ok, and strengthen raid5_check_reshape to fail if there are too many failed devices. We also break some code out into a separate function: remove_and_add_spares as the indent level for that code was getting crazy. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
The mddev and queue might be used for another array which does not set these, so they need to be cleared. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
md tries to warn the user if they e.g. create a raid1 using two partitions of the same device, as this does not provide true redundancy. However it also warns if a raid0 is created like this, and there is nothing wrong with that. At the place where the warning is currently printer, we don't necessarily know what level the array will be, so move the warning from the point where the device is added to the point where the array is started. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 2月, 2007 2 次提交
-
-
由 Eric W. Biederman 提交于
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
The sysctls used by the md driver are have unique binary numbers so remove the insert_at_head flag as it serves no useful purpose. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@sdl.org: dvb fix] Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 1月, 2007 2 次提交
-
-
由 NeilBrown 提交于
If a GFP_KERNEL allocation is attempted in md while the mddev_lock is held, it is possible for a deadlock to eventuate. This happens if the array was marked 'clean', and the memalloc triggers a write-out to the md device. For the writeout to succeed, the array must be marked 'dirty', and that requires getting the mddev_lock. So, before attempting a GFP_KERNEL allocation while holding the lock, make sure the array is marked 'dirty' (unless it is currently read-only). Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
Now that we sometimes step the array events count backwards (when transitioning dirty->clean where nothing else interesting has happened - so that we don't need to write to spares all the time), it is possible for the event count to return to zero, which is potentially confusing and triggers and MD_BUG. We could possibly remove the MD_BUG, but is just as easy, and probably safer, to make sure we never return to zero. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-