- 02 4月, 2010 2 次提交
-
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Dan Carpenter 提交于
We take the spin_lock again in fail_all_cmds() so we need to unlock here. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 25 3月, 2010 2 次提交
-
-
由 Divyesh Shah 提交于
Even if they are found to be co-operating. The prio_trees do not have any IDLE cfqqs on them. cfq_close_cooperator() is called from cfq_select_queue() and cfq_completed_request(). The latter ensures that the close cooperator code does not get invoked if the current cfqq is of class IDLE but the former doesn't seem to have any such checks. So an IDLE cfqq may get merged with a BE cfqq from the same group which should be avoided. Signed-off-by: Divyesh Shah<dpshah@google.com> Acked-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Divyesh Shah 提交于
These have helped us debug some issues we've noticed in earlier IO controller versions and should be useful now as well. The extra logging covers: - idling behavior. Since there are so many conditions based on which we decide to idle or not, this patch adds a log message for some conditions that we've found useful. - workload slices and current prio and workload type Changelog from v1: o moved log message from cfq_set_active_queue() to __cfq_set_active_queue() o changed queue_count to st->count Signed-off-by: Divyesh Shah<dpshah@google.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 24 3月, 2010 1 次提交
-
-
由 Ferenc Wagner 提交于
This macro worked only when applied to variables named 'kobj'. While this could have been fixed by simply renaming the macro argument, a more type-safe replacement by an inline function would be preferred. However, nobody uses this macro, so it's simpler to just remove it. Signed-off-by: NFerenc Wagner <wferi@niif.hu> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 19 3月, 2010 3 次提交
-
-
由 Richard Kennedy 提交于
Remove alignment padding to shrink struct request from 336 to 320 bytes so needing one fewer cacheline and therefore removing 48 bytes from struct request_queue. Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Conflicts: block/Kconfig Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Shaohua Li 提交于
Alex Shi reported a kbuild regression which is about 10% performance lost. He bisected to this commit: 3dde36dd. The reason is cfqq_close() can't find close cooperator. Restoring cfq_rq_close()'s threshold to original value makes the regression go away. Since for_preempt parameter isn't used anymore, this patch deletes it. Reported-by: NAlex Shi <alex.shi@intel.com> Signed-off-by: NShaohua Li <shaohua.li@intel.com> Acked-by: NCorrado Zoccolo <czoccolo@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 16 3月, 2010 2 次提交
-
-
由 Li Zefan 提交于
Make the config visible, so we can choose from CONFIG_BLK_CGROUP=y and CONFIG_BLK_CGROUP=m when CONFIG_IOSCHED_CFQ=m. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 NeilBrown 提交于
This flag is not used, so best discarded. Signed-off-by: NNeilBrown <neilb@suse.de> -- Hi Jens, I came across this recently - these are the only two occurances of "GENHD_FL_DRIVERFS" in the kernel, so it cannot be needed. NeilBrown Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 15 3月, 2010 30 次提交
-
-
由 Martin K. Petersen 提交于
These two values are useful when debugging issues surrounding maximum I/O size. Put them in sysfs with the rest of the queue limits. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
Remove compatibility wrappers and update remaining drivers. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
lcm() was defined to take integer-sized arguments. The supplied arguments are multiplied, however, causing us to overflow given sufficiently large input. That in turn led to incorrect optimal I/O size reporting in some cases (RAID over RAID). Switch lcm() over to unsigned long similar to gcd() and move the function from blk-settings.c to lib. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits) ACPI: processor: push file static MADT pointer into internal map_madt_entry() ACPI: processor: refactor internal map_lsapic_id() ACPI: processor: refactor internal map_x2apic_id() ACPI: processor: refactor internal map_lapic_id() ACPI: processor: driver doesn't need to evaluate _PDC ACPI: processor: remove early _PDC optin quirks ACPI: processor: add internal processor_physically_present() ACPI: processor: move acpi_get_cpuid into processor_core.c ACPI: processor: export acpi_get_cpuid() ACPI: processor: mv processor_pdc.c processor_core.c ACPI: processor: mv processor_core.c processor_driver.c ACPI: plan to delete "acpi=ht" boot option ACPI: remove "acpi=ht" DMI blacklist PNPACPI: add bus number support PNPACPI: add window support resource: add window support resource: add bus number support resource: expand IORESOURCE_TYPE_BITS to make room for bus resource type acpiphp: Execute ACPI _REG method for hotadded devices ACPI video: Be more liberal in validating _BQC behaviour ...
-
由 Wolfram Sang 提交于
Commit 6992f533 ("sysfs: Use one lockdep class per sysfs attribute.") introduced this requirement. First, at25 was fixed manually. Then, other occurences were found with coccinelle and the following semantic patch. Results were reviewed and fixed up: @ init @ identifier struct_name, bin; @@ struct struct_name { ... struct bin_attribute bin; ... }; @ main extends init @ expression E; statement S; identifier name, err; @@ ( struct struct_name *name; | - struct struct_name *name = NULL; + struct struct_name *name; ) ... ( sysfs_bin_attr_init(&name->bin); | + sysfs_bin_attr_init(&name->bin); if (sysfs_create_bin_file(E, &name->bin)) S | + sysfs_bin_attr_init(&name->bin); err = sysfs_create_bin_file(E, &name->bin); ) Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Len Brown 提交于
Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
-
由 Alex Chiang 提交于
There's no real need for a pointer to the MADT to be global. The only function who uses it is map_madt_entry. This allows us to remove some more ugly #ifdefs. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
Un-nest the if statements for readability. Remove comments that re-state the obvious. Change the control flow so that we no longer need a temp variable. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
Untangle the nested if conditions to make this function look more similar to the other map_*apic_id() functions. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
Untangle the if() statement a little for readability. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
Now that the early _PDC evaluation path knows how to correctly evaluate _PDC on only physically present processors, there's no need for the processor driver to evaluate it later when it loads. To cover the hotplug case, push _PDC evaluation down into the hotplug paths. Cc: x86@kernel.org Cc: Tony Luck <tony.luck@intel.com> Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
Now that we check for physically present processors before blindly evaluating _PDC, we no longer need to maintain a DMI opt-in table nor a kernel param. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
Detect if a processor is physically present before evaluating _PDC. We want this because some BIOS will provide a _PDC even for processors that are not present. These bogus _PDC methods then attempt to load non-existent tables, which causes problems. Avoid those bogus landmines. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
Enumerating processors (via MADT/_MAT) belongs in the processor core, which is always built-in, rather than living in the processor driver which may not be built. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
Rename static get_cpu_id() to acpi_get_cpuid() and export it. This change also gives us an opportunity to remove the #ifndef CONFIG_SMP from processor_driver.c and into a header file where it properly belongs. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
We've renamed the old processor_core.c to processor_driver.c, to convey the idea that it can be built modular and has driver-like bits. Now let's re-create a processor_core.c for the bits needed statically by the rest of the kernel. The contents of processor_pdc.c are a good starting spot, so let's just rename that file and complete our three card monte. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alex Chiang 提交于
The ACPI processor driver can be built as a module. But it has pieces of code that should always be built statically into the kernel. The plan is for processor_core.c to contain the static bits while processor_driver.c contains the module-like bits. Since the bulk of the code in the current processor_core.c is module-like, first step is to rename the file to processor_driver.c Next step will re-create processor_core.c and cherry-pick out the static bits. Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
SuSE added these entries when deploying ACPI in Linux-2.4. I pulled them into Linux-2.6 on 2003-08-09. Over the last 6+ years, several entries have proven to be unnecessary and deleted, while no new entries have been added. Matthew suggests that they now have negative value, and I agree. Based-on-patch-by: NMatthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Add support for bus number resources. This is for bridges with a range of bus numbers behind them. Previously, PNP ignored bus number resources. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Add support for resource windows. This is for bridge resources, i.e., regions where a bridge forwards transactions from the primary to the secondary side. This does not add support for *setting* windows via the /proc interface. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Add support for resource windows. This is for bridge resources, i.e., regions where a bridge forwards transactions from the primary to the secondary side. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Add support for bus number resources. This is for bridges with a range of bus numbers behind them. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
No functional change; this just makes room for another resource type. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Dan Carpenter 提交于
The original code returns a freed pointer. This function is expected to return NULL on errors. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Shaohua Li 提交于
Per ACPI spec, _ERG method should be executed before device driver gets control for hotpluged device. Firmware might do some configuration there. See http://bugzilla.kernel.org/show_bug.cgi?id=10805. In this machine, _REG method of docked device will configure cardbus bridge. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Tested-by: NPaul Martin <pm@debian.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Matthew Garrett 提交于
Right now, if _BQC returns a value we don't understand we immediately invalidate it. Change this behaviour so we only invalidate it if it continues to give an invalid answer after we've already set a brightness. Signed-off-by: NMatthew Garrett <mjg@redhat.com> Acked-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/mce: Fix build bug with CONFIG_PROVE_LOCKING=y && CONFIG_X86_MCE_INTEL=y
-
由 Randy Dunlap 提交于
drivers/i2c/busses/i2c-xiic.c:493: error: implicit declaration of function 'mdelay' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: "Richard Röjfors" <richard.rojfors@pelagicore.com> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: linux-i2c@vger.kernel.org Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Röjfors 提交于
This file was missed in the original patch that went into Linus' tree. Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: linux-i2c@vger.kernel.org Signed-off-by: NRichard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-