- 22 4月, 2017 2 次提交
-
-
由 Noa Osherovich 提交于
Add high data rate speed to the ib_port_speed enumeration. Signed-off-by: NNoa Osherovich <noaos@mellanox.com> Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Slava Shwartsman 提交于
This flow steering specification identifies flow for drop by the HW. If user create a flow only with the drop specification, then all the packets that hit this flow will be dropped, otherwise the HW will drop only the packets that match the other L2/L3/L4 specifications. Signed-off-by: NSlava Shwartsman <slavash@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 21 4月, 2017 3 次提交
-
-
Add RDMA netdev interface to ib device structure allowing RDMA netdev devices to be allocated by ib clients. The idea is to allow to providers to optimize IPoIB data path. New struct that includes functions and data member is exposed. It exposes set of callback functions for handling data path flows in IPoIB driver. Each provider can support these set of functions in order to optimize its specific data path, and let IPoIB to leverage its data path. There is an assumption, that providers should give the full set of functions and not only part of them, in order to work properly. Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
Define OPA VNIC interface between hardware independent VNIC functionality and the hardware dependent VNIC functionality. Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
Add rdma netdev interface to ib device structure allowing rdma netdev devices to be allocated by ib clients. Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 06 4月, 2017 4 次提交
-
-
由 Matan Barak 提交于
The completion channel we use in verbs infrastructure is FD based. Previously, we had a separate way to manage this object. Since we strive for a single way to manage any kind of object in this infrastructure, we conceptually treat all objects as subclasses of ib_uobject. This commit adds the necessary mechanism to support FD based objects like their IDR counterparts. FD objects release need to be synchronized with context release. We use the cleanup_mutex on the uverbs_file for that. Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
This changes only the handlers which deals with idr based objects to use the new idr allocation, fetching and destruction schema. This patch consists of the following changes: (1) Allocation, fetching and destruction is done via idr ops. (2) Context initializing and release is done through uverbs_initialize_ucontext and uverbs_cleanup_ucontext. (3) Ditching the live flag. Mostly, this is pretty straight forward. The only place that is a bit trickier is in ib_uverbs_open_qp. Commit [1] added code to check whether the uobject is already live and initialized. This mostly happens because of a race between open_qp and events. We delayed assigning the uobject's pointer in order to eliminate this race without using the live variable. [1] commit a040f95d ("IB/core: Fix XRC race condition in ib_uverbs_open_qp") Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
The new ioctl infrastructure supports driver specific objects. Each such object type has a hot unplug function, allocation size and an order of destruction. When a ucontext is created, a new list is created in this ib_ucontext. This list contains all objects created under this ib_ucontext. When a ib_ucontext is destroyed, we traverse this list several time destroying the various objects by the order mentioned in the object type description. If few object types have the same destruction order, they are destroyed in an order opposite to their creation. Adding an object is done in two parts. First, an object is allocated and added to idr tree. Then, the command's handlers (in downstream patches) could work on this object and fill in its required details. After a successful command, the commit part is called and the user objects become ucontext visible. If the handler failed, alloc_abort should be called. Removing an uboject is done by calling lookup_get with the write flag and finalizing it with destroy_commit. A major change from the previous code is that we actually destroy the kernel object itself in destroy_commit (rather than just the uobject). We should make sure idr (per-uverbs-file) and list (per-ucontext) could be accessed concurrently without corrupting them. Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
The current code creates an idr per type. Since types are currently common for all drivers and known in advance, this was good enough. However, the proposed ioctl based infrastructure allows each driver to declare only some of the common types and declare its own specific types. Thus, we decided to implement idr to be per uverbs_file. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 25 3月, 2017 1 次提交
-
-
由 Bart Van Assche 提交于
Avoid that the following error message is reported on the console while loading an RDMA driver with I/O MMU support enabled: DMAR: Allocating domain for mlx5_0 failed Ensure that DMA mapping operations that use to_pci_dev() to access to struct pci_dev see the correct PCI device. E.g. the s390 and powerpc DMA mapping operations use to_pci_dev() even with I/O MMU support disabled. This patch preserves the following changes of the DMA mapping updates patch series: - Introduction of dma_virt_ops. - Removal of ib_device.dma_ops. - Removal of struct ib_dma_mapping_ops. - Removal of an if-statement from each ib_dma_*() operation. - IB HW drivers no longer set dma_device directly. Reported-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reported-by: NParav Pandit <parav@mellanox.com> Fixes: commit 99db9494 ("IB/core: Remove ib_device.dma_device") Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: parav@mellanox.com Tested-by: parav@mellanox.com Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 15 2月, 2017 7 次提交
-
-
由 Or Gerlitz 提交于
Add protocol definition for the proprietary the USNIC driver. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Reviewed-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Or Gerlitz 提交于
Define raw packet protocol which comes to denote this port supports working with raw ethernet frames, e.g as done with RAW_PACKET QPs. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Artemy Kovalyov 提交于
Add flag IB_ODP_SUPPORT_IMPLICIT indicating implicit MR supported. Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Noa Osherovich 提交于
Add a new creation flag to set the scatter FCS capability of a WQ. Signed-off-by: NNoa Osherovich <noaos@mellanox.com> Reviewed-by: NMajd Dibbiny <majd@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Noa Osherovich 提交于
Add a QP creation flag to support cvlan stripping, it's applicable for RAW Ethernet QP. Signed-off-by: NNoa Osherovich <noaos@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Noa Osherovich 提交于
Enable WQ creation and modification with cvlan stripping offload. This includes: - Adding WQ creation flags. - Extending modify WQ to get flags and flags mask to enable turning it on and off. Signed-off-by: NNoa Osherovich <noaos@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Noa Osherovich 提交于
Expose raw packet capabilities in the core layer to enable a device to report it. Two existing capabilities, scatter FCS and IP CSUM were added to this field for a better user experience by exposing the raw packet caps from one location. This field will serve also for future capabilities for raw packet QP. A new capability was introduced - cvlan stripping, which is the device's ability to remove cvlan tag from an incoming packet and report it in the matching work completion. Signed-off-by: NNoa Osherovich <noaos@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 14 2月, 2017 1 次提交
-
-
由 Moses Reuben 提交于
This specification identifies flow with a specific tag-id. This tag-id will be reported in the CQE. Signed-off-by: NMoses Reuben <mosesr@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 28 1月, 2017 1 次提交
-
-
由 Yuval Shaia 提交于
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 25 1月, 2017 6 次提交
-
-
由 Jack Wang 提交于
As Jason suggested, we have 4 elements for per port arrays, it's better to have a separate structure to represent them. It simplifies code a bit, ~ 30 lines of code less :) Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com> Reviewed-by: NMichael Wang <yun.wang@profitbricks.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Amrani, Ram 提交于
As the functionality to convert the MTU from a number to enum_ib_mtu is ubiquitous, define a dedicated function and remove the duplicated code. Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Make the rxe and rdmavt drivers use dma_virt_ops. Update the comments that refer to the source files removed by this patch. Remove struct ib_dma_mapping_ops. Remove ib_device.dma_ops. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Andrew Boyer <andrew.boyer@dell.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Jonathan Toppins <jtoppins@redhat.com> Cc: Alex Estrin <alex.estrin@intel.com> Cc: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Add code in ib_register_device() for copying the DMA masks. Use &ib_device.dev in DMA mapping operations instead of dma_device. Remove ib_device.dma_device because due to this and previous patches it is no longer used. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Change the type of the dma_handle argument from u64 * to dma_addr_t *. This patch does not change any functionality. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Remove these functions because these are not used. Additionally, the implementation of these functions is not correct for the hfi1, qib and rxe drivers because dma_device is used instead of dma_ops. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 13 1月, 2017 1 次提交
-
-
由 Jack Wang 提交于
We need a port state cache in ib_core, later we will use in rdma_cm. Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com> Reviewed-by: NMichael Wang <yun.wang@profitbricks.com> Acked-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 11 1月, 2017 1 次提交
-
-
由 Parav Pandit 提交于
Added support APIs for IB core to register/unregister every IB/RDMA device with rdma cgroup for tracking rdma resources. IB core registers with rdma cgroup controller. Added support APIs for uverbs layer to make use of rdma controller. Added uverbs layer to perform resource charge/uncharge functionality. Added support during query_device uverb operation to ensure it returns resource limits by honoring rdma cgroup configured limits. Signed-off-by: NParav Pandit <pandit.parav@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 25 12月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 12月, 2016 6 次提交
-
-
由 Bodong Wang 提交于
Add new member rate_limit to ib_qp_attr which holds the packet pacing rate in kbps, 0 means unlimited. IB_QP_RATE_LIMIT is added to ib_attr_mask and could be used by RAW QPs when changing QP state from RTR to RTS, RTS to RTS. Signed-off-by: NBodong Wang <bodong@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moni Shoua 提交于
Add struct ib_udata to the signature of create_ah callback that is implemented by IB device drivers. This allows HW drivers to return extra data to the userspace library. This patch prepares the ground for mlx5 driver to resolve destination mac address for a given GID and return it to userspace. This patch was previously submitted by Knut Omang as a part of the patch set to support Oracle's Infiniband HCA (SIF). Signed-off-by: NKnut Omang <knut.omang@oracle.com> Signed-off-by: NMoni Shoua <monis@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moni Shoua 提交于
The function ib_resolve_eth_dmac() requires struct qp_attr * and qp_attr_mask as parameters while the function might be useful to resolve dmac for address handles. This patch changes the signature of the function so it can be used in the flow of creating an address handle. Signed-off-by: NMoni Shoua <monis@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moses Reuben 提交于
For a tunneled packet which contains external and internal headers, we refer to the external headers as "outer fields" and the internal headers as "inner fields". Example of a tunneled packet: { L2 | L3 | L4 | tunnel header | L2 | L3 | l4 | data } | | | | | | | { outer fields }{ inner fields } This patch introduces a new flag for flow steering rules - IB_FLOW_SPEC_INNER - which specifies that the rule applies to the inner fields, rather than to the outer fields of the packet. Signed-off-by: NMoses Reuben <mosesr@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moses Reuben 提交于
Aligned the structure ib_flow_spec_type indentation, after adding a new definition. Signed-off-by: NMoses Reuben <mosesr@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moses Reuben 提交于
In order to support tunneling, that can be used by the QP, both struct ib_flow_spec_tunnel and struct ib_flow_tunnel_filter can be used to more IP or UDP based tunneling protocols (e.g NVGRE, GRE, etc). IB_FLOW_SPEC_VXLAN_TUNNEL type flow specification is added to use this functionality and match specific Vxlan packets. In similar to IPv6, we check overflow of the vni value by comparing with the maximum size. Signed-off-by: NMoses Reuben <mosesr@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 17 11月, 2016 1 次提交
-
-
由 Moni Shoua 提交于
When MAD arrives to the hypervisor, we need to identify which slave it should be sent by destination GID. When L3 protocol is IPv4 the GRH is replaced by an IPv4 header. This patch detects when IPv4 header needs to be parsed instead of GRH. Fixes: b6ffaeff ('mlx4: In RoCE allow guests to have multiple GIDS') Signed-off-by: NMoni Shoua <monis@mellanox.com> Signed-off-by: NDaniel Jurgens <danielj@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 08 10月, 2016 5 次提交
-
-
由 Yuval Shaia 提交于
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maor Gottlieb 提交于
Add the following fields to IPv6 flow filter specification: 1. Traffic Class 2. Flow Label 3. Next Header 4. Hop Limit Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maor Gottlieb 提交于
Add the following fields to IPv4 flow filter specification: 1. Type of Service 2. Time to Live 3. Flags 4. Protocol Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maor Gottlieb 提交于
Flow steering specifications structures were implemented as in an extensible way that allows one to add new filters and new fields to existing filters. These specifications have never been extended, therefore the kernel flow specifications size and the user flow specifications size were must to be equal. In downstream patch, the IPv4 flow specifications type is extended to support TOS and TTL fields. To support an extension we change the flow specifications size condition test to be as following: * If the user flow specifications is bigger than the kernel specifications, we verify that all the bits which not in the kernel specifications are zeros and the flow is added only with the kernel specifications fields. * Otherwise, we add flow rule only with the user specifications fields. User space filters must be aligned with 32bits. Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yishai Hadas 提交于
Expose RSS related capabilities, it includes both direct ones (i.e. struct ib_rss_caps) and max_wq_type_rq which may be used in both RSS and non RSS flows. Specifically, supported_qpts: - QP types that support RSS on the device. max_rwq_indirection_tables: - Max number of receive work queue indirection tables that could be opened on the device. max_rwq_indirection_table_size: - Max size of a receive work queue indirection table. max_wq_type_rq: - Max number of work queues of receive type that could be opened on the device. Signed-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-