- 01 12月, 2008 1 次提交
-
-
由 Christoph Hellwig 提交于
Move all fields from xlog_iclog_fields_t into xlog_in_core_t instead of having them in a substructure and the using #defines to make it look like they were directly in xlog_in_core_t. Also document that xlog_in_core_2_t is grossly misnamed, and make all references to it typesafe. (First sent on Semptember 15th) Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com>
-
- 17 11月, 2008 1 次提交
-
-
由 Dave Chinner 提交于
When an I/O error occurs during an intermediate commit on a rolling transaction, xfs_trans_commit() will free the transaction structure and the related ticket. However, the duplicate transaction that gets used as the transaction continues still contains a pointer to the ticket. Hence when the duplicate transaction is cancelled and freed, we free the ticket a second time. Add reference counting to the ticket so that we hold an extra reference to the ticket over the transaction commit. We drop the extra reference once we have checked that the transaction commit did not return an error, thus avoiding a double free on commit error. Credit to Nick Piggin for tripping over the problem. SGI-PV: 989741 Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 30 10月, 2008 1 次提交
-
-
由 David Chinner 提交于
When we need to go from the log to the AIL, we have to go via the xfs_mount. Add a xfs_ail pointer to the log so we can go directly to the AIL associated with the log. SGI-PV: 988143 SGI-Modid: xfs-linux-melb:xfs-kern:32351a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
- 17 9月, 2008 1 次提交
-
-
由 Lachlan McIlroy 提交于
Memory allocations for log->l_grant_trace and iclog->ic_trace are done on demand when the first event is logged. In xlog_state_get_iclog_space() we call xlog_trace_iclog() under a spinlock and allocating memory here can cause us to sleep with a spinlock held and deadlock the system. For the log grant tracing we use KM_NOSLEEP but that means we can lose trace entries. Since there is no locking to serialize the log grant tracing we could race and have multiple allocations and leak memory. So move the allocations to where we initialize the log/iclog structures. Use KM_NOFS to avoid recursing into the filesystem and drop log->l_trace since it's not even used. SGI-PV: 983738 SGI-Modid: xfs-linux-melb:xfs-kern:31896a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
- 13 8月, 2008 2 次提交
-
-
由 Christoph Hellwig 提交于
Remove all the useless flags and code keyed off it in xfs_mountfs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31831a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
A lot of code has been converted away from semaphores, but there are still comments that reference semaphore behaviour. The log code is the worst offender. Update the comments to reflect what the code really does now. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31814a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 28 7月, 2008 1 次提交
-
-
由 Matthew Wilcox 提交于
The l_flushsema doesn't exactly have completion semantics, nor mutex semantics. It's used as a list of tasks which are waiting to be notified that a flush has completed. It was also being used in a way that was potentially racy, depending on the semaphore implementation. By using a sv_t instead of a semaphore we avoid the need for a separate counter, since we know we just need to wake everything on the queue. Original waitqueue implementation from Matthew Wilcox. Cleanup and conversion to sv_t by Christoph Hellwig. SGI-PV: 981507 SGI-Modid: xfs-linux-melb:xfs-kern:31059a Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 18 4月, 2008 4 次提交
-
-
由 David Chinner 提交于
To reduce contention on the log in large CPU count, separate out different parts of the xlog_t structure onto different cachelines. Move each lock onto a different cacheline along with all the members that are accessed/modified while that lock is held. Also, move the debugging code into debug code. SGI-PV: 978729 SGI-Modid: xfs-linux-melb:xfs-kern:30772a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
The ticket allocator is just a simple slab implementation internal to the log. It requires the icloglock to be held when manipulating it and this contributes to contention on that lock. Just kill the entire allocator and use a memory zone instead. While there, allow us to gracefully fail allocation with ENOMEM. SGI-PV: 978729 SGI-Modid: xfs-linux-melb:xfs-kern:30771a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Rather than use the icloglock for protecting the iclog completion callback chain, use a new per-iclog lock so that walking the callback chain doesn't require holding a global lock. This reduces contention on the icloglock during transaction commit and log I/O completion by reducing the number of times we need to hold the global icloglock during these operations. SGI-PV: 978729 SGI-Modid: xfs-linux-melb:xfs-kern:30770a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Now that we update the log tail LSN less frequently on transaction completion, we pass the contention straight to the global log state lock (l_iclog_lock) during transaction completion. We currently have to take this lock to decrement the iclog reference count. there is a reference count on each iclog, so we need to take þhe global lock for all refcount changes. When large numbers of processes are all doing small trnasctions, the iclog reference counts will be quite high, and the state change that absolutely requires the l_iclog_lock is the except rather than the norm. Change the reference counting on the iclogs to use atomic_inc/dec so that we can use atomic_dec_and_lock during transaction completion and avoid the need for grabbing the l_iclog_lock for every reference count decrement except the one that matters - the last. SGI-PV: 975671 SGI-Modid: xfs-linux-melb:xfs-kern:30505a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 10 4月, 2008 1 次提交
-
-
由 Eric Sandeen 提交于
Remove macro-to-small-function indirection from xfs_sb.h, and remove some which are completely unused. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30528a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 07 2月, 2008 5 次提交
-
-
由 Christoph Hellwig 提交于
Mostly trivial conversion with one exceptions: h_num_logops was kept in native endian previously and only converted to big endian in xlog_sync, but we always keep it big endian now. With todays cpus fast byteswap instructions that's not an issue but the new variant keeps the code clean and maintainable. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29821a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
- the various assign lsn macros are replaced by a single inline, xlog_assign_lsn, which is equivalent to ASSIGN_ANY_LSN_HOST except for a more sane calling convention. ASSIGN_LSN_DISK is replaced by xlog_assign_lsn and a manual bytespap, and ASSIGN_LSN by the same, except we pass the cycle and block arguments explicitly instead of a log paramter. The latter two variants only had 2, respectively one user anyway. - the GET_CYCLE is replaced by a xlog_get_cycle inline with exactly the same calling conventions. - GET_CLIENT_ID is replaced by xlog_get_client_id which leaves away the unused arch argument. Instead of conditional defintions depending on host endianess we now do an unconditional swap and shift then, which generates equal code. - the unused XLOG_SET macro is removed. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29820a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
- the various assign lsn macros are replaced by a single inline, xlog_assign_lsn, which is equivalent to ASSIGN_ANY_LSN_HOST except for a more sane calling convention. ASSIGN_LSN_DISK is replaced by xlog_assign_lsn and a manual bytespap, and ASSIGN_LSN by the same, except we pass the cycle and block arguments explicitly instead of a log paramter. The latter two variants only had 2, respectively one user anyway. - the GET_CYCLE is replaced by a xlog_get_cycle inline with exactly the same calling conventions. - GET_CLIENT_ID is replaced by xlog_get_client_id which leaves away the unused arch argument. Instead of conditional defintions depending on host endianess we now do an unconditional swap and shift then, which generates equal code. - the unused XLOG_SET macro is removed. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29819a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Un-obfuscate GRANT_LOCK, remove GRANT_LOCK->mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code, and change lock type to spinlock_t. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29741a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Un-obfuscate LOG_LOCK, remove LOG_LOCK->mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code, and change lock type to spinlock_t. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29740a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 16 10月, 2007 1 次提交
-
-
由 Christoph Hellwig 提交于
... or in the case of XLOG_TIC_ADD_OPHDR remove a useless macro entirely. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29511a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 15 10月, 2007 2 次提交
-
-
由 Eric Sandeen 提交于
xfs_start_flags can make use of is_power_of_2 to tidy up the test a little bit. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29327a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Remove sizing of logbuf size & count based on physical memory; this was never a very good gauge as it's looking at global memory, but deciding on sizing per-filesystem; no account is made of the total number of filesystems, for example. For now just take the largest "default" case, as was set for machines with >400MB - 8 x 32k buffers. This can always be tuned higher or lower with mount options if necessary. Removes one more user of xfs_physmem. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29323a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 28 9月, 2006 2 次提交
-
-
由 Tim Shimmin 提交于
space for the unmount record - which becomes a problem in the freeze/thaw scenario. SGI-PV: 942533 SGI-Modid: xfs-linux-melb:xfs-kern:26815a Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
SGI-PV: 955302 SGI-Modid: xfs-linux-melb:xfs-kern:26749a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NNathan Scott <nathans@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 11 1月, 2006 3 次提交
-
-
由 Tim Shimmin 提交于
get more useful error info on space for trans items SGI-PV: 947110 SGI-Modid: xfs-linux-melb:xfs-kern:24886a Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 946205 SGI-Modid: xfs-linux-melb:xfs-kern:203360a Signed-off-by: NChristoph Hellwig <hch@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Eric Sandeen 提交于
SGI-PV: 946611 SGI-Modid: xfs-linux-melb:xfs-kern:203307a Signed-off-by: NEric Sandeen <sandeen@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 25 11月, 2005 1 次提交
-
-
由 Nathan Scott 提交于
SGI-PV: 946205 SGI-Modid: xfs-linux-melb:xfs-kern:24567a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 02 11月, 2005 3 次提交
-
-
由 Nathan Scott 提交于
SGI-PV: 944821 SGI-Modid: xfs-linux:xfs-kern:24213a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 943122 SGI-Modid: xfs-linux:xfs-kern:23901a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 08 9月, 2005 1 次提交
-
-
由 Nathan Scott 提交于
Christoph). SGI-PV: 942400 SGI-Modid: xfs-linux-melb:xfs-kern:23771a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 02 9月, 2005 1 次提交
-
-
由 Tim Shimmin 提交于
SGI-PV: 931456 SGI-Modid: xfs-linux:xfs-kern:23155a Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 21 6月, 2005 1 次提交
-
-
由 Christoph Hellwig 提交于
SGI-PV: 936255 SGI-Modid: xfs-linux:xfs-kern:192760a Signed-off-by: NChristoph Hellwig <hch@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-