Adjust io queue depth more easily, and make sure io queue depth >= 2.
Signed-off-by: Nweiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

"i" should be signed or it could cause a forever loop on the cleanup
path. "size" can be used uninitialized.

Fixes: 87ad72a5 ("nvme-pci: implement host memory buffer support")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Target validation of the Create Association LS revised to accept any
LS as long as all non-pad data has been received. This allows a (newer)
target to accept the LS from older initiators with varying pad lengths.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

When our RDMA queue-pair is torn down with high load
of I/O traffic, we have no way of knowing if the
memory region was actually registered by the reg_mr
work request as it completion flushes with error (hw
might have done it or not).

So in order to not deal with all this uncertanty, we
simply recycle the MR in reinit_request.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Usually before we teardown the controller we want to:
1. complete/cancel any ctrl inflight works
2. remove ctrl namespaces (only for removal though, resets
   shouldn't remove any namespaces).

but we do not want to destroy the controller device as
we might use it for logging during the teardown stage.

This patch adds nvme_start_ctrl() which queues inflight
controller works (aen, ns scan, queue start and keep-alive
if kato is set) and nvme_stop_ctrl() which cancels the works
namespace removal is left to the callers to handle.

Move nvme_uninit_ctrl after we are done with the
controller device.
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Without it its not guaranteed that no .queue_rq is inflight.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: virtio-dev@lists.oasis-open.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Unlike blk_mq_stop_hw_queues, blk_mq_quiesce_queue respects the
submission path rcu grace. quiesce the queue before iterating
on live tags, or performing device io quiescing.

While were at it, verify that the request started in mtip_abort_cmd
amd mtip_queue_cmd tag iteration calls.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Unlike blk_mq_stop_hw_queues, blk_mq_quiesce_queue respects the
submission path rcu grace. quiesce the queue before iterating
on live tags.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Acked-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

When we requeue a request, we can always insert the request
back to the scheduler instead of doing it when restarting
the queues and kicking the requeue work, so get rid of
the requeue kick in nvme (core and drivers).

Also, now there is no need start hw queues in nvme_kill_queues
We don't stop the hw queues anymore, so no need to
start them.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

unlike blk_mq_stop_hw_queues and blk_mq_start_stopped_hw_queues
quiescing/unquiescing respects the submission path rcu grace.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

unlike blk_mq_stop_hw_queues and blk_mq_start_stopped_hw_queues
quiescing/unquiescing respects the submission path rcu grace.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

unlike blk_mq_stop_hw_queues and blk_mq_start_stopped_hw_queues
quiescing/unquiescing respects the submission path rcu grace.

Also, make sure to unquiesce before cleanup the admin queue.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-By: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

unlike blk_mq_stop_hw_queues and blk_mq_start_stopped_hw_queues
quiescing/unquiescing respects the submission path rcu grace.
Also make sure to kick the requeue list when appropriate.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

This patch improves the way the RDMA IB signalling is done by using atomic
operations for the signalling variable. This avoids race conditions on
sig_count.

The signalling interval changes slightly and is now the largest power of
two not larger than queue depth / 2.

ilog() usage idea by Bart Van Assche.
Signed-off-by: NMarta Rybczynska <marta.rybczynska@kalray.eu>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org

Cc: James Smart <james.smart@broadcom.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

We might have more/less queues once we reconnect/reset. For
example due to cpu going online/offline or controller constraints.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

We might have more/less queues once we reconnect/reset. For
example due to cpu going online/offline
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

We might have more/less queues once we reconnect/reset. For
example due to cpu going online/offline or controller constraints.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Its what the user passed, so its probably a better
idea to keep it intact. Also, limit the number of
I/O queues to max online cpus and the lport maximum
hw queues.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

we are going to need the name for the core routine...
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

All transports use either a private cache of controller cap or an on-stack
copy, move it to the generic struct nvme_ctrl. In the future it will also
be maintained by the core.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

All all transports use the queue_count in exactly the same, so move it to
the generic struct nvme_ctrl. In the future it will also be maintained by
the core.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-By: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

PM1725 controllers have a couple of quirks that need to be handled in
the driver:

 - I/O queue depth must be limited to 64 entries on controllers that do
   not report MQES.

 - The host interface registers go offline briefly while resetting the
   chip. Thus a delay is needed before checking whether the controller
   is ready.

Note that the admin queue depth is also limited to 64 on older versions
of this board. Since our NVME_AQ_DEPTH is now 32 that is no longer an
issue.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Do bitmap checks only when debug mode is enable. The line bitmap used
for mapping to physical addresses is fairly large (~512KB) and it is
expensive to do this checks on the fast path.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When a read is directed to the cache, we risk that the lba has been
updated during the time we made the L2P table lookup and the time we are
actually reading form the cache. We intentionally not hold the L2P lock
not to block other threads.

While strict ordering is not a guarantee at this level (unless REQ_FLUSH
has been previously issued), we have experience that some databases that
have recently implemented direct I/O support, issue metadata reads very
close to the writes, without issuing a fsync in the middle. An easy way
to support them while they is to make an extra effort and check the L2P
map right before reading the cache.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add a sanity check to the pblk initialization sequence in order to
ensure that enough LUNs have been allocated to store the line metadata.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When removing a pblk instance, pad the current line using asynchronous
I/O. This reduces the removal time from ~1 minute in the worst case to a
couple of seconds.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For now, we allocate a per I/O buffer for GC data. Since the potential
size of the buffer is 256KB and GC is not in the fast path, do this
allocation with vmalloc. This puts lets pressure on the memory
allocator at no performance cost.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix bad metadata buffer assignations introduced when refactoring the
medatada write path.

Fixes: dd2a4343 lightnvm: pblk: sched. metadata on write thread
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When user threads place data into the write buffer, they reserve space
and do the memory copy out of the lock. As a consequence, when the write
thread starts persisting data, there is a chance that it is not copied
yet. In this case, avoid polling, and schedule before retrying.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove unused variable.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Prevent pblk->lines being double freed in case of an error during pblk
initialization.

Fixes: dd2a4343: "lightnvm: pblk: sched. metadata on write thread"
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use the right types and conversions on le64 variables. Reported by
sparse.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove dead build rule for drivers/nvme/host/scsi.c which has been
removed by commit ("nvme: Remove SCSI translations").
Signed-off-by: NValentin Rothberg <vrothberg@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We can deadlock in case we got to a device removal
event on a queue which is already in the process of
destroying the cm_id is this is blocking until all
events on this cm_id will drain. On the other hand
we cannot guarantee that rdma_destroy_id was invoked
as we only have indication that the queue disconnect
flow has been queued (the queue state is updated before
the realease work has been queued).

So, we leave all the queue removal to a separate ib_client
to avoid this deadlock as ib_client device removal is in
a different context than the cm_id itself.
Reported-by: NShiraz Saleem <shiraz.saleem@intel.com>
Tested-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, the fc transport invokes nvme_fc_error_recovery() on every
io in which the transport detects an error.  Which means:
a) it's really noisy on large io loads that all get hit by a link down.
b) we repeatively call nvme_stop_queues() even though queues are
 stopped upon the first error or as first steps of reset_work.

Correct by:
Errors are only meaningful if the controller is in the LIVE state.
Thus, enact the reset_work only if LIVE. If called repeatively, state
will have already transitioned.
There's no need to stop the queues here. Let the first steps of
reset_work do the queue stopping.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

if a nvme command is issued with an opcode that is not supported by
the target (example: opcode 21 - detach namespace), the target
crashes due to a null pointer.

nvmet_req_init() detects the bad opcode and immediately calls the nvme
command done routine with an error status, allowing the transport to
send the response. However, the FC transport was aborting the command
on error, so the abort freed the lldd point, but the rsp transmit path
referenced it psot the free.

Fix by removing the abort call on nvmet_req_init() failure.
The completion response will be sent with an error status code.

As the completion path will terminate the io, ensure the data_sg
lists show an unused state so that teardown paths are successful.
Signed-off-by: NPaul Ely <Paul.Ely@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If a controller connection is attempted (say to a subsystem that
does not exist), the first attempt errors out.  If another connect
is attempted, it crashes.

Issue is the prior controller has yet execute it's final put, thus
its still on lists. However, opts points on it have been cleared, thus
causing the crash if they are referenced.

Fix is to add the missing put after the nvme_uninit_ctrl() call on
the attachment failure.
Signed-off-by: NPaul Ely <Paul.Ely@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Per the recommendation by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html

Wait for io aborts to complete wait converted from msleep look to
using a struct completion.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Current fc transport code, on io termination, is calling
nvme_cleanup_cmd() followed by the transport dma unmap routine
which also calls nvme_cleanup_cmd(). Which means two kfrees occur
on the same address, raising havoc. This resulted in odd data errors,
effectively corruption..

Fix by removing the extraneous double calls. Call now occurs only in
teardown paths and as part of dma unmap routine.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>