list_for_each_entry_safe() will do nothing if it was empty list.
This patch removes unneeded list_empty() check for
list_for_each_entry_safe().
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878ss5aho6.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

We have 2 soc_init_card_debugfs() implementations for with/without DEBUG_FS.
But, snd_soc_instantiate_card() calls snd_soc_dapm_debugfs_init() under
ifdef DEBUG_FS after soc_init_card_debugfs(). This is very strange.
We can call snd_soc_dapm_debugfs_init() under soc_init_card_debugfs().

	#ifdef CONFIG_DEBUG_FS
=>	static void soc_init_card_debugfs(...)
	{
		...
	}
	...
	#else
=>	static inline void soc_init_card_debugfs(...)
	{
		...
	}
	#endif

	static int snd_soc_instantiate_card(struct snd_soc_card *card)
	{
		...
=>		soc_init_card_debugfs(card);

*	#ifdef CONFIG_DEBUG_FS
*		snd_soc_dapm_debugfs_init(&card->dapm, card->debugfs_card_root);
*	#endif
	}
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a7clahob.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

snd_soc_add_card_controls() registers controls by using
for(... i < num; ...). If controls was NULL, num should be zero.
Thus, we don't need to check about controls pointer.
This patch also cares missing return value.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blx1ahoi.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

snd_soc_dapm_add_routes() registers routes by using
for(... i < num; ...). If routes was NULL, num should be zero.
Thus, we don't need to check about route pointer.
This patch also cares missing return value.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87d0hhahon.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

snd_soc_add_component_controls() registers controls by using
for(... i < num; ...). If controls was NULL, num should be zero.
Thus, we don't need to check about controls pointer.
This patch also cares missing return value.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ef1xahor.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

SAI module on imx7ulp/imx8m features 2 new registers (VERID and PARAM)
at the beginning of register address space.

On imx7ulp FIFOs can held up to 16 x 32 bit samples.
On imx8mq FIFOs can held up to 128 x 32 bit samples.
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-5-daniel.baluta@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

New IP version introduces Version ID and Parameter registers
and optionally added Timestamp feature.

VERID and PARAM registers are placed at the top of registers
address space and some registers are shifted according to
the following table:

Tx/Rx data registers and Tx/Rx FIFO registers keep their
addresses, all other registers are shifted by 8.

SAI Memory map is described in chapter 13.10.4.1.1 I2S Memory map
of the Reference Manual [1].

In order to make as less changes as possible we attach an offset
to each register offset to each changed register definition. The
offset is read from each board private data.

[1]https://cache.nxp.com/secured/assets/documents/en/reference-manual/IMX8MDQLQRM.pdf?__gda__=1563728701_38bea7f0f726472cc675cb141b91bec7&fileExt=.pdfSigned-off-by: NMihai Serban <mihai.serban@nxp.com>
[initial coding in the NXP internal tree]
Signed-off-by: NShengjiu Wang <shengjiu.wang@nxp.com>
[bugfixing and cleanups]
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
[adapted to linux-next]
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-4-daniel.baluta@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

Tx channel enable (TCE) / Rx channel enable (RCE) bits
enable corresponding data channel for Tx/Rx operation.

Because SAI supports up the 8 channels TCE/RCE occupy
up the 8 bits inside TCR3/RCR3 registers we need to extend
the mask to reflect this.
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-3-daniel.baluta@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

SAI IP supports up to 8 data lines. The configuration of
supported number of data lines is decided at SoC integration
time.

This patch adds definitions for all related data TX/RX registers:
	* TDR0..7, Transmit data register
	* TFR0..7, Transmit FIFO register
	* RDR0..7, Receive data register
	* RFR0..7, Receive FIFO register
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-2-daniel.baluta@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

struct ipc_message contains fields: header, tx_data and tx_size which
represent TX i.e. request while RX is represented by rx_data and rx_size
with reply's header equivalent missing.

Reply header may contain some vital information including, but not
limited to, received payload size. Some IPCs have entire payload found
within RX header instead. Content and value of said header is context
dependent and may vary between firmware versions and target platform.
Current model does not allow such IPCs to function at all.

Rather than appending yet another parameter to an already long list of
such for sst_ipc_tx_message_XXXs, declare message container in form of
struct sst_ipc_message and add them to parent's ipc_message declaration.

Align haswell, baytrail and skylake with updated request-reply model and
modify their reply processing functions to save RX header within message
container. Despite the range of changes, status quo is achieved.
Signed-off-by: NCezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723144341.21339-2-cezary.rojewski@intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

snd_soc_dapm_new_controls() registers controls by using
for(... i < num; ...). It means if widget was NULL, num should be zero.
Thus, we don't need to check about widget pointer.
This patch also cares missing return value.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ftmdahow.wl-kuninori.morimoto.gx@renesas.comReviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

snd_soc_rtdcom_add() is using both "rtdcom" and "new_rtdcom" as
variable name, but these are not used at same time.
Let's reuse rtdcom.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h86tahp2.wl-kuninori.morimoto.gx@renesas.comReviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

It doesn't removes list during loop at snd_soc_find_dai_link().
We don't need to use _safe loop.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imr9ahp9.wl-kuninori.morimoto.gx@renesas.comReviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

snd_soc_add_dai_link() might return error, we need to check it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k1bpahpd.wl-kuninori.morimoto.gx@renesas.comReviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

soc-core has many for_each_xxx, but it is a little bit
difficult to know which list is relead to which for_each_xxx.
This patch adds missing comment for it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfw5ahpj.wl-kuninori.morimoto.gx@renesas.comReviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

To be more safety code, let's set NULL to component->debugfs_root
when it was cleanuped.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87muglahq0.wl-kuninori.morimoto.gx@renesas.comReviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For i.MX7ULP and i.MX8MQ register map is changed. Add two new compatbile
strings to differentiate this.
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-6-daniel.baluta@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

The addition of a kernel module parameter to optionally disable MSI
had the side effect of permanently disabling it.

The return value of pci_alloc_irq_vectors() is the number of allocated
vectors or a negative number on error, so testing with the ! operator
is not quite right. It was one optimization too far.

Restore previous behavior to use MSI by default, unless the user
selects not to do so or the allocation of irq_vectors fails.

Fixes: 672ff5e3 ('ASoC: SOF: Intel: hda: add a parameter to disable MSI')
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190806170603.10815-1-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

The factory test needs to know whether the calibration completed.
This flag helps to confirm the calibration completed or not.
Signed-off-by: NShuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20190806091459.14382-1-shumingf@realtek.comSigned-off-by: NMark Brown <broonie@kernel.org>

- The user level application could set the R0 temperature after booting system.
  The degree Celsius of R0 temperature store in the non-volatile space
  when doing R0 calibration.
- TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data
Signed-off-by: NShuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20190806091435.14329-1-shumingf@realtek.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.

We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.

Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_pcm_free() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k1c54czu.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.

We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.

Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_pcm() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfwl4czy.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.

We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.

Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_mmap() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87muh14d02.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.

We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.

Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_page() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o91h4d06.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.

We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.

Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_copy_user() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnlx4d0a.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.

We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.

Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_ioctrl() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r26d4d0f.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.

We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.

Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_pointer() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgqt4d0j.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc-dapm / soc-core are using a long way round to call
.set_bias_level.

	if (driver->set_bias_level)
		dapm->set_bias_level = ...;
	...
	if (dapm->set_bias_level)
		ret = dapm->set_bias_level(...);

We can directly call it via driver->set_bias_level.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.

This patch moves snd_soc_component_set_bias_level() to soc-component.c
and updates parameters.
dapm->set_bias_level is no longer needed
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tvb94d0n.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc-dapm / soc-core are using a long way round to call
.stream_event.

	if (driver->stream_event)
		dapm->stream_event = ...;
	...
	if (dapm->stream_event)
		ret = dapm->stream_event(...);

We can directly call it via driver->stream_event.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.

This patch moves snd_soc_component_stream_event() to soc-component.c
and updates parameters.
dapm->stream_event is no longer needed
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9vp4d0r.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc-dapm / soc-core are using a long way round to call
.seq_notifier.

	if (driver->seq_notifier)
		dapm->seq_notifier = ...;
	...
	if (dapm->seq_notifier)
		ret = dapm->seq_notifier(...);

We can directly call it via driver->seq_notifier.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.

This patch moves snd_soc_component_seq_notifier() to soc-component.c,
and updates parameters.
dapm->seq_notifier is no longer needed
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wog54d0v.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->xxx,
thus, it is deep nested, and makes code difficult to read,
and is not good for encapsulation.
This patch adds new snd_soc_component_of_xlate_dai_name() and use it
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y30l4d0z.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->xxx,
thus, it is deep nested, and makes code difficult to read,
and is not good for encapsulation.
This patch adds new snd_soc_component_of_xlate_dai_id() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhl14d14.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->xxx,
thus, it is deep nested, and makes code difficult to read,
and is not good for encapsulation.
This patch adds new snd_soc_component_remove() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871ryd5rlo.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->xxx,
thus, it is deep nested, and makes code difficult to read,
and is not good for encapsulation.
This patch adds new snd_soc_component_probe() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736it5rlt.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->xxx,
But, it is not good for encapsulation.
This patch adds new snd_soc_component_is_suspended() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l395rlx.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->xxx,
thus, it is deep nested, and makes code difficult to read,
and is not good for encapsulation.
This patch adds new snd_soc_component_resume() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875znp5rm2.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->xxx,
thus, it is deep nested, and makes code difficult to read,
and is not good for encapsulation.
This patch adds new snd_soc_component_suspend() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e855rn0.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->ops->xxx,
thus, it is deep nested, and makes code difficult to read,
and is not good for encapsulation.
This patch adds new snd_soc_component_trigger() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878ssl5rn5.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->ops->xxx,
thus, it is deep nested, and makes code difficult to read,
and is not good for encapsulation.
This patch adds new snd_soc_component_hw_free() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a7d15rna.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current ALSA SoC is directly using component->driver->ops->xxx,
thus, it is deep nested, and makes code difficult to read,
and is not good for encapsulation.
This patch adds new snd_soc_component_hw_params() and use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blxh5rnf.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>