stable inclusion
from stable-v5.10.111
commit 7e88a50704b0c49ad3f2d11e8b963341cf68a89f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7e88a50704b0c49ad3f2d11e8b963341cf68a89f

--------------------------------

commit 5467801f upstream.

GPIO chip irq members are exposed before they could be completely
initialized and this leads to race conditions.

One such issue was observed for the gc->irq.domain variable which
was accessed through the I2C interface in gpiochip_to_irq() before
it could be initialized by gpiochip_add_irqchip(). This resulted in
Kernel NULL pointer dereference.

Following are the logs for reference :-

kernel: Call Trace:
kernel:  gpiod_to_irq+0x53/0x70
kernel:  acpi_dev_gpio_irq_get_by+0x113/0x1f0
kernel:  i2c_acpi_get_irq+0xc0/0xd0
kernel:  i2c_device_probe+0x28a/0x2a0
kernel:  really_probe+0xf2/0x460
kernel: RIP: 0010:gpiochip_to_irq+0x47/0xc0

To avoid such scenarios, restrict usage of GPIO chip irq members before
they are completely initialized.
Signed-off-by: NShreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 5f54364ff6cfcd14cddf5441c4a490bb28dd69f7
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5f54364ff6cfcd14cddf5441c4a490bb28dd69f7

--------------------------------

commit 2bbac98d upstream.

Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may
represent the last reference held on the task mm.
hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed
before the final use in hfi1_release_user_pages().  A new task may
allocate the mm structure while it is still being used, resulting in
problems. One manifestation is corruption of the mmap_sem counter leading
to a hang in down_write().  Another is corruption of an mm struct that is
in use by another task.

Fixes: 3d2a9d64 ("IB/hfi1: Ensure correct mm is used at all times")
Link: https://lore.kernel.org/r/20220408133523.122165.72975.stgit@awfm-01.cornelisnetworks.com
Cc: <stable@vger.kernel.org>
Signed-off-by: NDouglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 8b6f04b4c9d965c04431620d12afb5e729c7eacf
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8b6f04b4c9d965c04431620d12afb5e729c7eacf

--------------------------------

commit 03e59b1e upstream.

When HS400 tuning is complete and HS400 is going to be activated, we
have to keep the current number of TAPs and should not overwrite them
with a hardcoded value. This was probably a copy&paste mistake when
upporting HS400 support from the BSP.

Fixes: 26eb2607 ("mmc: renesas_sdhi: add eMMC HS400 mode support")
Reported-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220404114902.12175-1-wsa+renesas@sang-engineering.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 029b4170737f03253dd5cb9a57a657ce0cc2b532
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=029b4170737f03253dd5cb9a57a657ce0cc2b532

--------------------------------

commit 0d319dd5 upstream.

Use sg and not data->sg when checking sg list elements. Else only the
first element alignment is checked.
The last element should be checked the same way, for_each_sg already set
sg to sg_next(sg).

Fixes: 46b723dd ("mmc: mmci: add stm32 sdmmc variant")
Cc: stable@vger.kernel.org
Signed-off-by: NYann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20220317111944.116148-2-yann.gautier@foss.st.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 41a519c05beee0ad9a0e53143fe24c6eeb677db6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=41a519c05beee0ad9a0e53143fe24c6eeb677db6

--------------------------------

commit 7e2646ed upstream.

This reverts commit bb32e198.

Commit 1a3ed0dc ("mmc: sdhci-xenon: fix 1.8v regulator stabilization")
contains proper fix for the issue described in commit bb32e198 ("mmc:
sdhci-xenon: fix annoying 1.8V regulator warning").

Fixes: 8d876bf4 ("mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable")
Cc: stable@vger.kernel.org # 1a3ed0dc ("mmc: sdhci-xenon: fix 1.8v regulator stabilization")
Signed-off-by: NPali Rohár <pali@kernel.org>
Reviewed-by: NMarek Behún <kabel@kernel.org>
Reviewed-by: NMarcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/20220318141441.32329-1-pali@kernel.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit bd905fed87ce01ac010011bb8f44ed0140116ceb
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bd905fed87ce01ac010011bb8f44ed0140116ceb

--------------------------------

[ Upstream commit 71ff461c ]

Commit 3f6634d9 ("iommu: Use right way to retrieve iommu_ops") started
triggering a NULL pointer dereference for some omap variants:

__iommu_probe_device from probe_iommu_group+0x2c/0x38
probe_iommu_group from bus_for_each_dev+0x74/0xbc
bus_for_each_dev from bus_iommu_probe+0x34/0x2e8
bus_iommu_probe from bus_set_iommu+0x80/0xc8
bus_set_iommu from omap_iommu_init+0x88/0xcc
omap_iommu_init from do_one_initcall+0x44/0x24

This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV)
as noted by Jason Gunthorpe <jgg@ziepe.ca>.

Looks like the regression already happened with an earlier commit
6785eb91 ("iommu/omap: Convert to probe/release_device() call-backs")
that changed the function return type and missed converting one place.

Cc: Drew Fustini <dfustini@baylibre.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Suman Anna <s-anna@ti.com>
Suggested-by: NJason Gunthorpe <jgg@ziepe.ca>
Fixes: 6785eb91 ("iommu/omap: Convert to probe/release_device() call-backs")
Fixes: 3f6634d9 ("iommu: Use right way to retrieve iommu_ops")
Signed-off-by: NTony Lindgren <tony@atomide.com>
Tested-by: NDrew Fustini <dfustini@baylibre.com>
Reviewed-by: NJason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220331062301.24269-1-tony@atomide.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 594205b4936771a250f9d141e7e0fff21c3dd2d9
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=594205b4936771a250f9d141e7e0fff21c3dd2d9

--------------------------------

[ Upstream commit aadb22ba ]

In get_initial_state, it calls notify_initial_state_done(skb,..) if
cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(),
the skb will be freed by nlmsg_free(skb).
Then get_initial_state will goto out and the freed skb will be used by
return value skb->len, which is a uaf bug.

What's worse, the same problem goes even further: skb can also be
freed in the notify_*_state_change -> notify_*_state calls below.
Thus 4 additional uaf bugs happened.

My patch lets the problem callee functions: notify_initial_state_done
and notify_*_state_change return an error code if errors happen.
So that the error codes could be propagated and the uaf bugs can be avoid.

v2 reports a compilation warning. This v3 fixed this warning and built
successfully in my local environment with no additional warnings.
v2: https://lore.kernel.org/patchwork/patch/1435218/

Fixes: a2972846 ("drbd: Backport the "events2" command")
Signed-off-by: NLv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: NChristoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 6c17f4ef3c4f662865ac99ad167a8b896ca70d2f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6c17f4ef3c4f662865ac99ad167a8b896ca70d2f

--------------------------------

[ Upstream commit 2c7d1b28 ]

This fixes case where MSPI controller is used to access spi-nor
flash and BSPI block is not present.

Fixes: 5f195ee7 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: NKamal Dasu <kdasu.kdev@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220328142442.7553-1-kdasu.kdev@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 8928239e5e2e460d95b8a0b89f61671625e7ece0
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8928239e5e2e460d95b8a0b89f61671625e7ece0

--------------------------------

[ Upstream commit 4e910dbe ]

qede_build_skb() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.
This results in a kernel panic because the skb to reserve is NULL.

Add a check in case build_skb() failed to allocate and return NULL.

The NULL return is handled correctly in callers to qede_build_skb().

Fixes: 8a863397 ("qede: Add build_skb() support.")
Signed-off-by: NJamie Bainbridge <jamie.bainbridge@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit b7893388bb888cb15c7db0c0f71bd58a4fb5312c
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b7893388bb888cb15c7db0c0f71bd58a4fb5312c

--------------------------------

[ Upstream commit 8d90991e ]

The driver doesn't support clause 45 register access yet, but doesn't
check if the access is a c45 one either. This leads to spurious register
reads and writes. Add the check.

Fixes: 542671fe ("net: phy: mscc-miim: Add MDIO driver")
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit e54ea8fc51cae0232982f78c1b168d3b89a46ad2
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e54ea8fc51cae0232982f78c1b168d3b89a46ad2

--------------------------------

[ Upstream commit f9124c68 ]

Unfortunately, the ice driver doesn't respect the RCU critical section that
XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to
paths that destroy resources that might be in use.

This was addressed in other AF_XDP ZC enabled drivers, for reference see
for example commit b3873a5b ("net/i40e: Fix concurrency issues
between config flow and XSK")

Fixes: efc2214b ("ice: Add support for XDP")
Fixes: 2d4238f5 ("ice: Add support for AF_XDP")
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NShwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit ffce126c952e0b849cf280e0344bc087adc7256c
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ffce126c952e0b849cf280e0344bc087adc7256c

--------------------------------

[ Upstream commit 05ef6813 ]

Disable check for queue being enabled in ice_vc_dis_qs_msg, because
there could be a case when queues were created, but were not enabled.
We still need to delete those queues.

Normal workflow for VF looks like:
Enable path:
VIRTCHNL_OP_ADD_ETH_ADDR (opcode 10)
VIRTCHNL_OP_CONFIG_VSI_QUEUES (opcode 6)
VIRTCHNL_OP_ENABLE_QUEUES (opcode 8)

Disable path:
VIRTCHNL_OP_DISABLE_QUEUES (opcode 9)
VIRTCHNL_OP_DEL_ETH_ADDR (opcode 11)

The issue appears only in stress conditions when VF is enabled and
disabled very fast.
Eventually there will be a case, when queues are created by
VIRTCHNL_OP_CONFIG_VSI_QUEUES, but are not enabled by
VIRTCHNL_OP_ENABLE_QUEUES.
In turn, these queues are not deleted by VIRTCHNL_OP_DISABLE_QUEUES,
because there is a check whether queues are enabled in
ice_vc_dis_qs_msg.

When we bring up the VF again, we will see the "Failed to set LAN Tx queue
context" error during VIRTCHNL_OP_CONFIG_VSI_QUEUES step. This
happens because old 16 queues were not deleted and VF requests to create
16 more, but ice_sched_get_free_qparent in ice_ena_vsi_txq would fail to
find a parent node for first newly requested queue (because all nodes
are allocated to 16 old queues).

Testing Hints:

Just enable and disable VF fast enough, so it would be disabled before
reaching VIRTCHNL_OP_ENABLE_QUEUES.

while true; do
        ip link set dev ens785f0v0 up
        sleep 0.065 # adjust delay value for you machine
        ip link set dev ens785f0v0 down
done

Fixes: 77ca27c4 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: NAnatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NAlice Michael <alice.michael@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit b003fc4913ea79c3c1458879acb474c66240489a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b003fc4913ea79c3c1458879acb474c66240489a

--------------------------------

[ Upstream commit ccfee182 ]

When VF is freshly created, but not brought up, ring->txq_teid
value is by default set to 0.
But 0 is a valid TEID. On some platforms the Root Node of
Tx scheduler has a TEID = 0. This can cause issues as shown below.

The proper way is to set ring->txq_teid to ICE_INVAL_TEID (0xFFFFFFFF).

Testing Hints:
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
ip link set dev ens785f0v0 up
ip link set dev ens785f0v0 down

If we have freshly created VF and quickly turn it on and off, so there
would be no time to reach VIRTCHNL_OP_CONFIG_VSI_QUEUES stage, then
VIRTCHNL_OP_DISABLE_QUEUES stage will fail with error:
[  639.531454] disable queue 89 failed 14
[  639.532233] Failed to disable LAN Tx queues, error: ICE_ERR_AQ_ERROR
[  639.533107] ice 0000:02:00.0: Failed to stop Tx ring 0 on VSI 5

The reason for the fail is that we are trying to send AQ command to
delete queue 89, which has never been created and receive an "invalid
argument" error from firmware.

As this queue has never been created, it's teid and ring->txq_teid
have default value 0.
ice_dis_vsi_txq has a check against non-existent queues:

node = ice_sched_find_node_by_teid(pi->root, q_teids[i]);
if (!node)
	continue;

But on some platforms the Root Node of Tx scheduler has a teid = 0.
Hence, ice_sched_find_node_by_teid finds a node with teid = 0 (it is
pi->root), and we go further to submit an erroneous request to firmware.

Fixes: 37bb8390 ("ice: Move common functions out of ice_main.c part 7/7")
Signed-off-by: NAnatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Reviewed-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NAlice Michael <alice.michael@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit ebd1e3458dbf6643aa0272da398cb5b537d492b7
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ebd1e3458dbf6643aa0272da398cb5b537d492b7

--------------------------------

[ Upstream commit 2b04bd4f ]

This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.

Fixes: d346c9e8 ("dpaa2-ptp: reuse ptp_qoriq driver")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404125336.13427-1-linmq006@gmail.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 43c2d7890ecabe527448a6c391fb2d9a5e6bbfe0
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=43c2d7890ecabe527448a6c391fb2d9a5e6bbfe0

--------------------------------

[ Upstream commit 4d809f69 ]

The documentation of the function rvt_error_qp says both r_lock and s_lock
need to be held when calling that function.  It also asserts using lockdep
that both of those locks are held.  However, the commit I referenced in
Fixes accidentally makes the call to rvt_error_qp in rvt_ruc_loopback no
longer covered by r_lock.  This results in the lockdep assertion failing
and also possibly in a race condition.

Fixes: d757c60e ("IB/rdmavt: Fix concurrency panics in QP post_send and modify to error")
Link: https://lore.kernel.org/r/20220228165330.41546-1-dossche.niels@gmail.comSigned-off-by: NNiels Dossche <dossche.niels@gmail.com>
Acked-by: NDennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 3a57babfb6e9871b961e3c36e616af87df4ef1e8
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3a57babfb6e9871b961e3c36e616af87df4ef1e8

--------------------------------

[ Upstream commit 84c2362f ]

Don't remove MRs from the cache if need to delay the removal.

Fixes: b9358bdb ("RDMA/mlx5: Fix locking in MR cache work queue")
Link: https://lore.kernel.org/r/c3087a90ff362c8796c7eaa2715128743ce36722.1649062436.git.leonro@nvidia.comSigned-off-by: NAharon Landau <aharonl@nvidia.com>
Reviewed-by: NShay Drory <shayd@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit d8992b393f974b47c4a72b9bacdbfc4110e29eea
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d8992b393f974b47c4a72b9bacdbfc4110e29eea

--------------------------------

[ Upstream commit 458f5d92 ]

When the page_ring is not used page_ptr_mask is 0.
Do not dereference page_ring[0] in this case.

Fixes: 2768935a ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Reported-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NMartin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 0ac74169ebc34686a6ef2a033473a4913aa3e471
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0ac74169ebc34686a6ef2a033473a4913aa3e471

--------------------------------

[ Upstream commit facc173c ]

Insufficient space was being reserved in the page used for packet
reception, so the interface MTU could be set too large to still have
room for the contents of the packet when doing XDP redirect.  This
resulted in the following message when redirecting a packet between
3520 and 3822 bytes with an MTU of 3822:

[311815.561880] XDP_WARN: xdp_update_frame_from_buff(line:200): Driver BUG: missing reserved tailroom

Fixes: f18c2b77 ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit f8b0ef0a5889890b50482b6593bd8de544736351
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f8b0ef0a5889890b50482b6593bd8de544736351

--------------------------------

[ Upstream commit bce81feb ]

Avoid leaking the display mode variable if of_get_drm_display_mode
fails.

Fixes: 76ecd9c9 ("drm/imx: parallel-display: check return code from of_get_drm_display_mode()")
Addresses-Coverity-ID: 1443943 ("Resource leak")
Signed-off-by: NJosé Expósito <jose.exposito89@gmail.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220108165230.44610-1-jose.exposito89@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 25bc9fd4c8d13036c0656a00ebedc2cff4650a91
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=25bc9fd4c8d13036c0656a00ebedc2cff4650a91

--------------------------------

[ Upstream commit 8027a9ad ]

As the possible failure of the allocation, kmemdup() may return NULL
pointer.
Therefore, it should be better to check the return value of kmemdup()
and return error if fails.

Fixes: dc80d703 ("drm/imx-ldb: Add support to drm-bridge")
Signed-off-by: NJiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220105074729.2363657-1-jiasheng@iscas.ac.cnSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 02ab4abe5bbf60f6d0e020a974e0c40e42984a1a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=02ab4abe5bbf60f6d0e020a974e0c40e42984a1a

--------------------------------

[ Upstream commit c21cabb0 ]

In commit 9cbadf09 ("net: stmmac: support max-speed device tree
property"), when DT platforms don't set "max-speed", max_speed is set to
-1; for non-DT platforms, it stays the default 0.

Prior to commit eeef2f6b ("net: stmmac: Start adding phylink support"),
the check for a valid max_speed setting was to check if it was greater
than zero. This commit got it right, but subsequent patches just checked
for non-zero, which is incorrect for DT platforms.

In commit 92c3807b ("net: stmmac: convert to phylink_get_linkmodes()")
the conversion switched completely to checking for non-zero value as a
valid value, which caused 1000base-T to stop getting advertised by
default.

Instead of trying to fix all the checks, simply leave max_speed alone if
DT property parsing fails.

Fixes: 9cbadf09 ("net: stmmac: support max-speed device tree property")
Fixes: 92c3807b ("net: stmmac: convert to phylink_get_linkmodes()")
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220331184832.16316-1-wens@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 4be6ed03107b6e245f5ee0d9e273c868fda66154
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4be6ed03107b6e245f5ee0d9e273c868fda66154

--------------------------------

[ Upstream commit bd8c624c ]

VSI is set as default forwarding one when promisc mode is set for
PF interface, when PF is switched to switchdev mode or when VF
driver asks to enable allmulticast or promisc mode for the VF
interface (when vf-true-promisc-support priv flag is off).
The third case is buggy because in that case VSI associated with
VF remains as default one after VF removal.

Reproducer:
1. Create VF
   echo 1 > sys/class/net/ens7f0/device/sriov_numvfs
2. Enable allmulticast or promisc mode on VF
   ip link set ens7f0v0 allmulticast on
   ip link set ens7f0v0 promisc on
3. Delete VF
   echo 0 > sys/class/net/ens7f0/device/sriov_numvfs
4. Try to enable promisc mode on PF
   ip link set ens7f0 promisc on

Although it looks that promisc mode on PF is enabled the opposite
is true because ice_vsi_sync_fltr() responsible for IFF_PROMISC
handling first checks if any other VSI is set as default forwarding
one and if so the function does not do anything. At this point
it is not possible to enable promisc mode on PF without re-probe
device.

To resolve the issue this patch clear default forwarding VSI
during ice_vsi_release() when the VSI to be released is the default
one.

Fixes: 01b5e89a ("ice: Add VF promiscuous support")
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Reviewed-by: NMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: NAlice Michael <alice.michael@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit c5f77b595379b5191316edd365a542f8b1526066
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c5f77b595379b5191316edd365a542f8b1526066

--------------------------------

[ Upstream commit 16ed828b ]

The error handling path of the probe releases a resource that is not freed
in the remove function. In some cases, a ioremap() must be undone.

Add the missing iounmap() call in the remove function.

Link: https://lore.kernel.org/r/247066a3104d25f9a05de8b3270fc3c848763bcc.1647673264.git.christophe.jaillet@wanadoo.fr
Fixes: 45804fbb ("[SCSI] 53c700: Amiga Zorro NCR53c710 SCSI")
Reviewed-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit cf580d2e3884dbafd6b90269b03a24d661578624
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cf580d2e3884dbafd6b90269b03a24d661578624

--------------------------------

[ Upstream commit 792f232d ]

The vmbus driver relies on the panic notifier infrastructure to perform
some operations when a panic event is detected. Since vmbus can be built
as module, it is required that the driver handles both registering and
unregistering such panic notifier callback.

After commit 74347a99 ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
though, the panic notifier registration is done unconditionally in the module
initialization routine whereas the unregistering procedure is conditionally
guarded and executes only if HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE capability
is set.

This patch fixes that by unconditionally unregistering the panic notifier
in the module's exit routine as well.

Fixes: 74347a99 ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
Signed-off-by: NGuilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220315203535.682306-1-gpiccoli@igalia.comSigned-off-by: NWei Liu <wei.liu@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 0c122eb3a109356fb2c39f49c1768321248d0f1d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0c122eb3a109356fb2c39f49c1768321248d0f1d

--------------------------------

[ Upstream commit 1647b54e ]

This post-op should be a pre-op so that we do not pass -1 as the bit
number to test_bit().  The current code will loop downwards from 63 to
-1.  After changing to a pre-op, it loops from 63 to 0.

Fixes: 71c37505 ("drm/amdgpu/gfx: move more common KIQ code to amdgpu_gfx.c")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 84e5dfc05f37bbb7203af4ec6bd18a17d37abacf
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=84e5dfc05f37bbb7203af4ec6bd18a17d37abacf

--------------------------------

This reverts commit c4dc584a2d4c8d74b054f09d67e0a076767bdee5.

On Sat, Apr 09, 2022 at 09:07:51AM -0700, Randy Dunlap wrote:
>According to https://bugzilla.kernel.org/show_bug.cgi?id=215823,
>c4dc584a2d4c8d74b054f09d67e0a076767bdee5 ("hv: utils: add PTP_1588_CLOCK to Kconfig to fix build")
>is a problem for 5.10 since CONFIG_PTP_1588_CLOCK_OPTIONAL does not exist in 5.10.
>This prevents the hyper-V NIC timestamping from working, so please revert that commit.
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit f7c35220305f273bddc0bdaf1e453b4ca280f145
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f7c35220305f273bddc0bdaf1e453b4ca280f145

--------------------------------

[ Upstream commit 939fc856 ]

Add the missing logic to allow Lasi, WAX and Dino to set the
CPU affinity. This fixes IRQ migration to other CPUs when a
CPU is shutdown which currently holds the IRQs for one of those
chips.
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit c69b442125bf009fce26e15aa5616caf8a3673c3
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c69b442125bf009fce26e15aa5616caf8a3673c3

--------------------------------

[ Upstream commit fefb8a2a ]

Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reviewed-by: NAmit Shah <amit@kernel.org>
Cc: virtualization@lists.linux-foundation.org
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220316192010.19001-3-rdunlap@infradead.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 3309b322171180828564c386443eb5a62eabc862
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3309b322171180828564c386443eb5a62eabc862

--------------------------------

[ Upstream commit 988c7c00 ]

The commit c15c3747 (serial: samsung: fix potential soft lockup
during uart write) added an unlock of port->lock before
uart_write_wakeup() and a lock after it. It was always problematic to
write data from tty_ldisc_ops::write_wakeup and it was even documented
that way. We fixed the line disciplines to conform to this recently.
So if there is still a missed one, we should fix them instead of this
workaround.

On the top of that, s3c24xx_serial_tx_dma_complete() in this driver
still holds the port->lock while calling uart_write_wakeup().

So revert the wrap added by the commit above.

Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Hyeonkook Kim <hk619.kim@samsung.com>
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220308115153.4225-1-jslaby@suse.czSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit e2b2542f7452672ce2511b73ccea234d51dd5827
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e2b2542f7452672ce2511b73ccea234d51dd5827

--------------------------------

[ Upstream commit 10c46f2e ]

If we were to have two users of the same clock, doing something like:

clk_set_rate_range(user1, 1000, 2000);
clk_set_rate_range(user2, 3000, 4000);

The second call would fail with -EINVAL, preventing from getting in a
situation where we end up with impossible limits.

However, this is never explicitly checked against and enforced, and
works by relying on an undocumented behaviour of clk_set_rate().

Indeed, on the first clk_set_rate_range will make sure the current clock
rate is within the new range, so it will be between 1000 and 2000Hz. On
the second clk_set_rate_range(), it will consider (rightfully), that our
current clock is outside of the 3000-4000Hz range, and will call
clk_core_set_rate_nolock() to set it to 3000Hz.

clk_core_set_rate_nolock() will then call clk_calc_new_rates() that will
eventually check that our rate 3000Hz rate is outside the min 3000Hz max
2000Hz range, will bail out, the error will propagate and we'll
eventually return -EINVAL.

This solely relies on the fact that clk_calc_new_rates(), and in
particular clk_core_determine_round_nolock(), won't modify the new rate
allowing the error to be reported. That assumption won't be true for all
drivers, and most importantly we'll break that assumption in a later
patch.

It can also be argued that we shouldn't even reach the point where we're
calling clk_core_set_rate_nolock().

Let's make an explicit check for disjoints range before we're doing
anything.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220225143534.405820-4-maxime@cerno.techSigned-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 1e9b5538cf160788c88fc2e3e74badc65b8a6bac
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1e9b5538cf160788c88fc2e3e74badc65b8a6bac

--------------------------------

[ Upstream commit 80864594 ]

In preparation for making use of the clock-output-names, we want to
keep node around in ti_dt_clocks_register().

This change should not needed as a fix currently.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-3-tony@atomide.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 2e16895d06e6e9a0057ecb93f03531c13cc8d595
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2e16895d06e6e9a0057ecb93f03531c13cc8d595

--------------------------------

[ Upstream commit 41a92a89 ]

w1_seq was failing due to several devices responding to the
CHAIN_DONE at the same time. Now properly selects the current
device in the chain with MATCH_ROM. Also acknowledgment was
read twice.
Signed-off-by: NLucas Denefle <lucas.denefle@converge.io>
Link: https://lore.kernel.org/r/20220223113558.232750-1-lucas.denefle@converge.ioSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 93498c6e775ae91732a8109dba1bdcd324908f84
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=93498c6e775ae91732a8109dba1bdcd324908f84

--------------------------------

[ Upstream commit 60f1d3c9 ]

One error handler of wfx_init_common() return without calling
ieee80211_free_hw(hw), which may result in memory leak. And I add
one err label to unify the error handler, which is useful for the
subsequent changes.
Suggested-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: NXiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_24A24A3EFF61206ECCC4B94B1C5C1454E108@qq.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 8f1d24f85ffd0dd75b4220bc05693b90fc8cb59c
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8f1d24f85ffd0dd75b4220bc05693b90fc8cb59c

--------------------------------

[ Upstream commit 6466ba18 ]

Use the existing dev_err_probe() helper instead of open-coding the same
operation.
Signed-off-by: NAmjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220111095255.176141-3-aouledameur@baylibre.comSigned-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit aa0b7296785312a4bfa8fac0ba8ad78698fd9fcf
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=aa0b7296785312a4bfa8fac0ba8ad78698fd9fcf

--------------------------------

[ Upstream commit ca225857 ]

In case of an invalid handle the function find_servive_by_handle
returns NULL. So take care of this and avoid a NULL pointer dereference.
Reviewed-by: NNicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-18-git-send-email-stefan.wahren@i2se.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit be4ecca95819175c4a5f6f8516edeb7be8711374
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=be4ecca95819175c4a5f6f8516edeb7be8711374

--------------------------------

[ Upstream commit 2a8b5394 ]

SI5341_OUT_CFG_RDIV_FORCE2 shall be checked first to distinguish whether
a divider for a given output is set to 2 (SI5341_OUT_CFG_RDIV_FORCE2
is set) or the output is disabled (SI5341_OUT_CFG_RDIV_FORCE2 not set,
SI5341_OUT_R_REG is set 0).
Before the change, divider set to 2 (SI5341_OUT_R_REG set to 0) was
interpreted as output is disabled.
Signed-off-by: NAdam Wujek <dev_public@wujek.eu>
Link: https://lore.kernel.org/r/20211203141125.2447520-1-dev_public@wujek.euReviewed-by: NRobert Hancock <robert.hancock@calian.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit f6b9550f53674226838076139ebfc1818f5bbada
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f6b9550f53674226838076139ebfc1818f5bbada

--------------------------------

[ Upstream commit ac01df34 ]

Usually, the vbus_regulator (smps10 on omap5evm) boots up disabled.

Hence calling regulator_disable() indirectly through dwc3_omap_set_mailbox()
during probe leads to:

[   10.332764] WARNING: CPU: 0 PID: 1628 at drivers/regulator/core.c:2853 _regulator_disable+0x40/0x164
[   10.351919] unbalanced disables for smps10_out1
[   10.361298] Modules linked in: dwc3_omap(+) clk_twl6040 at24 gpio_twl6040 palmas_gpadc palmas_pwrbutton
industrialio snd_soc_omap_mcbsp(+) snd_soc_ti_sdma display_connector ti_tpd12s015 drm leds_gpio
drm_panel_orientation_quirks ip_tables x_tables ipv6 autofs4
[   10.387818] CPU: 0 PID: 1628 Comm: systemd-udevd Not tainted 5.17.0-rc1-letux-lpae+ #8139
[   10.405129] Hardware name: Generic OMAP5 (Flattened Device Tree)
[   10.411455]  unwind_backtrace from show_stack+0x10/0x14
[   10.416970]  show_stack from dump_stack_lvl+0x40/0x4c
[   10.422313]  dump_stack_lvl from __warn+0xb8/0x170
[   10.427377]  __warn from warn_slowpath_fmt+0x70/0x9c
[   10.432595]  warn_slowpath_fmt from _regulator_disable+0x40/0x164
[   10.439037]  _regulator_disable from regulator_disable+0x30/0x64
[   10.445382]  regulator_disable from dwc3_omap_set_mailbox+0x8c/0xf0 [dwc3_omap]
[   10.453116]  dwc3_omap_set_mailbox [dwc3_omap] from dwc3_omap_probe+0x2b8/0x394 [dwc3_omap]
[   10.467021]  dwc3_omap_probe [dwc3_omap] from platform_probe+0x58/0xa8
[   10.481762]  platform_probe from really_probe+0x168/0x2fc
[   10.481782]  really_probe from __driver_probe_device+0xc4/0xd8
[   10.481782]  __driver_probe_device from driver_probe_device+0x24/0xa4
[   10.503762]  driver_probe_device from __driver_attach+0xc4/0xd8
[   10.510018]  __driver_attach from bus_for_each_dev+0x64/0xa0
[   10.516001]  bus_for_each_dev from bus_add_driver+0x148/0x1a4
[   10.524880]  bus_add_driver from driver_register+0xb4/0xf8
[   10.530678]  driver_register from do_one_initcall+0x90/0x1c4
[   10.536661]  do_one_initcall from do_init_module+0x4c/0x200
[   10.536683]  do_init_module from load_module+0x13dc/0x1910
[   10.551159]  load_module from sys_finit_module+0xc8/0xd8
[   10.561319]  sys_finit_module from __sys_trace_return+0x0/0x18
[   10.561336] Exception stack(0xc344bfa8 to 0xc344bff0)
[   10.561341] bfa0:                   b6fb5778 b6fab8d8 00000007 b6ecfbb8 00000000 b6ed0398
[   10.561341] bfc0: b6fb5778 b6fab8d8 855c0500 0000017b 00020000 b6f9a3cc 00000000 b6fb5778
[   10.595500] bfe0: bede18f8 bede18e8 b6ec9aeb b6dda1c2
[   10.601345] ---[ end trace 0000000000000000 ]---

Fix this unnecessary warning by checking if the regulator is enabled.
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/af3b750dc2265d875deaabcf5f80098c9645da45.1646744616.git.hns@goldelico.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit a4dd3e9e5ae84c2757d67933828c5d16a1e76769
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a4dd3e9e5ae84c2757d67933828c5d16a1e76769

--------------------------------

[ Upstream commit 00eec9fe ]

The Lantech 8330-262D-E module is 2500base-X capable, but it reports the
nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the
module.

The following in an EEPROM dump of such a SFP with the serial number
redacted:

00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00    ???...? @????...
10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20    ??..Lantech
20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32        ....8330-262
30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb    D-E     V1.0?R.?
40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX    .?..FCXXXXXXXXXX
50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98        220214  h???
60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54    EXTREMELY COMPAT
70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20    IBLE
Signed-off-by: NMichael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.ccSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 1d7effe5fff9d28e45e18ac3a564067c7ddfe898
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1d7effe5fff9d28e45e18ac3a564067c7ddfe898

--------------------------------

[ Upstream commit 271add11 ]

fc_exch_release(ep) will decrease the ep's reference count. When the
reference count reaches zero, it is freed. But ep is still used in the
following code, which will lead to a use after free.

Return after the fc_exch_release() call to avoid use after free.

Link: https://lore.kernel.org/r/20220303015115.459778-1-niejianglei2021@163.comReviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJianglei Nie <niejianglei2021@163.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.111
commit 7c657c0694ff690e361a13ce41c36b9dfb433ec8
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7c657c0694ff690e361a13ce41c36b9dfb433ec8

--------------------------------

[ Upstream commit bf8d87c0 ]

Fix a misused goto label jump since that can result in a memory leak.

Link: https://lore.kernel.org/r/17e7b9b9ee6.c6d9c6a02564.4545388417402742326@zohomail.comSigned-off-by: NLi Chen <lchen@ambarella.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>