kfd_resume doesn't involve iommu operation, remove
redundant iommu cleanup code.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Tested-by: NJames Zhu <James.Zhu@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

rather than asic type.

v2: fix up CZ case
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We can get the pdev and asic type from the adev.  No need
to pass them explicitly.

v2: squash in build fix for !CONFIG_HSA_AMD from Anson
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Device manager releases device-specific resources when a driver
disconnects from a device, devm_memunmap_pages and
devm_release_mem_region calls in svm_migrate_fini are redundant.

It causes below warning trace after patch "drm/amdgpu: Split
amdgpu_device_fini into early and late", so remove function
svm_migrate_fini.

BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718

WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795
devm_release_action+0x51/0x60
Call Trace:
    ? memunmap_pages+0x360/0x360
    svm_migrate_fini+0x2d/0x60 [amdgpu]
    kgd2kfd_device_exit+0x23/0xa0 [amdgpu]
    amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu]
    amdgpu_device_fini_sw+0x45/0x290 [amdgpu]
    amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
    drm_dev_release+0x20/0x40 [drm]
    release_nodes+0x196/0x1e0
    device_release_driver_internal+0x104/0x1d0
    driver_detach+0x47/0x90
    bus_remove_driver+0x7a/0xd0
    pci_unregister_driver+0x3d/0x90
    amdgpu_exit+0x11/0x20 [amdgpu]
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.

v2: squash in fix for !CONFIG_HSA_AMD

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.

Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.

v2: squash in fix for !CONFIG_HSA_AMD

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.

Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add u32 gfx_target_version field to kfd_node_properties and
kfd_device_info. Populate <asic>_device_info structs accordingly and
expose to sysfs.

This allows eliminating device-ID-based lookup tables in user mode for
future ASICs.
Signed-off-by: NGraham Sider <Graham.Sider@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add KFD support for cyan_skillfish.

v2: whitespace fixes (Alex)
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update Arcturus/Aldebaran thermal throttle SMI event path to use
ASIC-independent throttler bits when logging.
Signed-off-by: NGraham Sider <Graham.Sider@amd.com>
Reviewed-by: NHarish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

start_cpsch and stop_cpsch can be called during kfd device
initialization or during gpu reset/recovery. So they can
run concurrently. Currently in start_cpsch and stop_cpsch,
pm_init and pm_uninit is not protected by the dpm lock.
Imagine such a case that user use packet manager's function
to submit a pm4 packet to hang hws (ie through command
cat /sys/class/kfd/kfd/topology/nodes/1/gpu_id | sudo tee
/sys/kernel/debug/kfd/hang_hws), while kfd device is under
device reset/recovery so packet manager can be not initialized.
There will be unpredictable protection fault in such case.

This patch moves pm_init/uninit inside the dpm lock and check
packet manager is initialized before using packet manager
function.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Acked-by: NChristian Konig <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Renaming packets to packet_mgr to reflect the real meaning
of this variable.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Acked-by: NChristian Konig <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch is to add GFX10 based Yellow Carp KFD support.
We will bypass IOMMU v2.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use it to call disply code dependent on device->drv_data
before it's set to NULL on device unplug

v5:
Move HW finilization into this callback to prevent MMIO accesses
post cpi remove.

v7:
Split kfd suspend from device exit to expdite HW related
stuff to amdgpu_pci_remove

v8:
Squash previous KFD commit into this commit to avoid compile break.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520032057.497334-1-andrey.grodzovsky@amd.com

Add the function pointer.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add KFD support for beige_goby
v2: fix asic name typo
v3: squash in updates (Alex)
v4: squash in needs_atomics fix (Alex)
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

update kfd_supported_devices to enable Aldebaran virtualization support
Signed-off-by: NZhigang Luo <zhigang.luo@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: updated MEC FW version after validating gws with debugger
Signed-off-by: NHarish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: NJoseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In order to support multi-process debugging, HWS PM4 packet
MAP_PROCESS requires an extension of 5 DWORDS to support targeting of
per-vmid SPI debug control registers as well as watch points per process.
Signed-off-by: NJonathan Kim <jonathan.kim@amd.com>
Reviewed-by: NFelix Kuehling <felix.kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Register vram memory as MEMORY_DEVICE_PRIVATE type resource, to
allocate vram backing pages for page migration.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Power Management IP is initialized/enabled before KFD init. When a
thermal throttling happens before kfd_smi_init is done, calling the KFD
SMI update function causes a stack dump by referring a NULL pointer (
smi_clients list). Check if kfd_init is completed before calling the
function.
Signed-off-by: NAmber Lin <Amber.Lin@amd.com>
Reviewed-by: NMukul Joshi <mukul.joshi@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Create dedicated Aldebaran kfd2kgd callbacks to prepare
for new per-vmid register instructions for debug trap
setting functions and sending host traps.

v2: rebase (Alex)
Signed-off-by: NJonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: NOak Zeng <Oak.Zeng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Similar to arcturus, but ARCH/ACC VGPRs may now be split unevenly.
A new field in SQ_WAVE_GPR_ALLOC tracks the boundary between the two
sets of VGPRs.

Squash below patches:

drm/amdkfd: Use preprocessor for IP-specific trap handler code
drm/amdkfd: Fix VGPR restore race in gfx8/gfx9 trap handler
drm/amdkfd: Remove duplicated code in gfx9 trap handler
drm/amdkfd: Separate ARCH/ACC VGPR restore in trap handler
drm/amdkfd: Reverse order of ARCH/ACC VGPR restore in trap handler
Signed-off-by: NJay Cornwall <jay.cornwall@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add initial KFD support.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GFX10 CP firmware expects PCIe atomics support. Don't enumerate GFX10
devices on platforms (PCIe v2) that don't support PCIe atomics.

Currently, some of the applications like clinfo soft hangs on platforms
without PCIe atomics support.
Signed-off-by: NHarish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since the unique_id is now obtained in amdgpu in smu_late_init,
topology misses getting the value during KFD device initialization.
To work around this, we use amdgpu_amdkfd_get_unique_id to get
the unique_id at read time. Due to this, we can remove unique_id from
the kfd_dev structure, since we only need it in the KFD node properties
struct
Signed-off-by: NKent Russell <kent.russell@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add KFD support.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add KFD support for dimgrey cavefish.

v2: rebase (Alex)
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch is to add GFX10 based APU Van Gogh KFD support. We will treat Van
Gogh as "dgpu" (bypass IOMMU v2).
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NYong Zhao <Yong.Zhao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will allow us to have different defaults per asic
in a future patch.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move doorbell allocation for a process into kfd device and
allocate doorbell space in each PDD during process creation.
Currently, KFD manages its own doorbell space but for some
devices, amdgpu would allocate the complete doorbell
space instead of leaving a chunk of doorbell space for KFD to
manage. In a system with mix of such devices, KFD would need
to request process doorbell space based on the type of device,
either from amdgpu or from its own doorbell space.
Signed-off-by: NMukul Joshi <mukul.joshi@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If KFD_SUPPORT_IOMMU_V2 is not set, gcc warns:

drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device.c:121:37: warning: ‘raven_device_info’ defined but not used [-Wunused-const-variable=]
 static const struct kfd_device_info raven_device_info = {
                                     ^~~~~~~~~~~~~~~~~

As Huang Rui suggested, Raven already has the fallback path,
so it should be out of IOMMU v2 flag.
Suggested-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add support for reporting GPU reset events through SMI. KFD
would report both pre and post GPU reset events.
Signed-off-by: NMukul Joshi <mukul.joshi@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to use a function pointer because the implementation is not
ASIC-specific.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to use a function pointer because the implementation is not
ASIC-specific. This fixes missing support due to a missing function
pointer on Arcturus.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We still have a few iommu issues which need to address, so force raven
as "dgpu" path for the moment.

This is to add the fallback path to bypass IOMMU if IOMMU v2 is disabled
or ACPI CRAT table not correct.

v2: Use ignore_crat parameter to decide whether it will go with IOMMUv2.
v3: Align with existed thunk, don't change the way of raven, only renoir
    will use "dgpu" path by default.
v4: don't update global ignore_crat in the driver, and revise fallback
    function if CRAT is broken.
v5: refine acpi crat good but no iommu support case, and rename the
    title.
v6: fix the issue of dGPU initialized firstly, just modify the report
    value in the node_show().
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add support for reporting thermal throttling events through SMI.
Also, add a counter to count the number of throttling interrupts
observed and report the count in the SMI event message.
Signed-off-by: NMukul Joshi <mukul.joshi@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When the compute is malfunctioning or performance drops, the system admin
will use SMI (System Management Interface) tool to monitor/diagnostic what
went wrong. This patch provides an event watch interface for the user
space to register devices and subscribe events they are interested. After
registered, the user can use annoymous file descriptor's poll function
with wait-time specified and wait for events to happen. Once an event
happens, the user can use read() to retrieve information related to the
event.

VM fault event is done in this patch.

v2: - remove UNREGISTER and add event ENABLE/DISABLE
    - correct kfifo usage
    - move event message API to kfd_ioctl.h
v3: send the event msg in text than in binary
v4: support multiple clients
v5: move events enablement from ioctl to fd write
v6: sparse fix
Signed-off-by: NAmber Lin <Amber.Lin@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add callbacks to KGD for navy flounder.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>