Default to PSP ucode loading unless the user specifies
direct.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove all TA binary structures and add the specific binary
structure in struct ta_context.
Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Refactor the code of amdgpu_ucode_init_single_fw to make it more
readable as too many ucode need to handle on this function currently.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The function is ready on psp firmware, and enable it by default.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will switch to front door loading by default after this function is
stable.

v2: use APU flags (Alex)
Signed-off-by: NLang Yu <lang.yu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use backdoor loading.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <John.Clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Implement function amdgpu_ucode_name to show ucode name
via ucode id.

v2: rename it to amdgpu_ucode_name
Signed-off-by: NLang Yu <Lang.Yu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

synchronized fw header with latest source
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch sets fw load type as direct with fw_load_type=0 for yellow carp.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add general PSP support for beige_goby
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use direct load for beige_goby
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Match existing asics.

v2: rebase (Alex)
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set backdoor loading way in current phase

v2: change case location to not break other asics
Signed-off-by: NLe Ma <le.ma@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the smc v2_0 printer is not compatible with the smc v2_1 .
1. add smc v2_1 printer.
2. cleanup code
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When declaring pointer data, the "*" symbol should be used adjacent to
the data name as per the coding standards. This resolves following
issues reported by checkpatch script:
	ERROR: "foo *   bar" should be "foo *bar"
	ERROR: "foo * bar" should be "foo *bar"
	ERROR: "foo*            bar" should be "foo *bar"
	ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: NDeepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support to load RLC iram and dram ucode when RLC firmware struct use v2.2
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support to load RLC iram and dram ucode when RLC firmware struct use v2.2
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support both back and front door loading for dimgrey_cavefish.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use direct load for dimgrey_cavefish.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch is to enable psp support for vangogh
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch sets fw load type as direct for van gogh for the moment.
Will switch to psp when psp is ready.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Get the amdgpu_device from the DRM device by use
of an inline function, drm_to_adev(). The inline
function resolves a pointer to struct drm_device
to a pointer to struct amdgpu_device.

v2: Use a typed visible static inline function
    instead of an invisible macro.
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

if other threads have holden the reset lock, recovery will
fail to try_lock. Therefore we introduce atomic hive->in_reset
and adev->in_gpu_reset, to avoid reentering GPU recovery.

v2:
drop "? true : false" in the definition of amdgpu_in_reset
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NDennis Li <Dennis.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The whole approach wasn't thought through till the end.

We already had a reset lock like this in the past and it caused the same problems like this one.

Completely revert the patch for now and add individual trylock protection to the hardware access functions as necessary.

This reverts commit df9c8d1a.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover,
the atomic adev->in_gpu_reset and hive->in_reset are used to avoid
re-entering GPU recovery.

During GPU reset and resume, it is unsafe that other threads access GPU,
which maybe cause GPU reset failed. Therefore the new rw_semaphore
adev->reset_sem is introduced, which protect GPU from being accessed by
external threads during recovery.

v2:
1. add rwlock for some ioctls, debugfs and file-close function.
2. change to use dqm->is_resetting and dqm_lock for protection in kfd
driver.
3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid
re-enter GPU recovery for the same GPU hang.

v3:
1. change back to use adev->reset_sem to protect kfd callback
functions, because dqm_lock couldn't protect all codes, for example:
free_mqd must be called outside of dqm_lock;

[ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019
[ 1230.177221] Call Trace:
[ 1230.178249]  dump_stack+0x98/0xd5
[ 1230.179443]  amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu]
[ 1230.180673]  gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu]
[ 1230.181882]  amdgpu_gart_unbind+0xa9/0xe0 [amdgpu]
[ 1230.183098]  amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu]
[ 1230.184239]  ? ttm_bo_put+0x171/0x5f0 [ttm]
[ 1230.185394]  ttm_tt_unbind+0x21/0x40 [ttm]
[ 1230.186558]  ttm_tt_destroy.part.12+0x12/0x60 [ttm]
[ 1230.187707]  ttm_tt_destroy+0x13/0x20 [ttm]
[ 1230.188832]  ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm]
[ 1230.189979]  ttm_bo_put+0x1be/0x5f0 [ttm]
[ 1230.191230]  amdgpu_bo_unref+0x1e/0x30 [amdgpu]
[ 1230.192522]  amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu]
[ 1230.193833]  free_mqd+0x25/0x40 [amdgpu]
[ 1230.195143]  destroy_queue_cpsch+0x1a7/0x270 [amdgpu]
[ 1230.196475]  pqm_destroy_queue+0x105/0x260 [amdgpu]
[ 1230.197819]  kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu]
[ 1230.199154]  kfd_ioctl+0x277/0x500 [amdgpu]
[ 1230.200458]  ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu]
[ 1230.201656]  ? tomoyo_file_ioctl+0x19/0x20
[ 1230.202831]  ksys_ioctl+0x98/0xb0
[ 1230.204004]  __x64_sys_ioctl+0x1a/0x20
[ 1230.205174]  do_syscall_64+0x5f/0x250
[ 1230.206339]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

2. remove try_lock and introduce atomic hive->in_reset, to avoid
re-enter GPU recovery.

v4:
1. remove an unnecessary whitespace change in kfd_chardev.c
2. remove comment codes in amdgpu_device.c
3. add more detailed comment in commit message
4. define a wrap function amdgpu_in_reset

v5:
1. Fix some style issues.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: NChristian König <christian.koenig@amd.com>
Suggested-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: NLijo Lazar <Lijo.Lazar@amd.com>
Suggested-by: NLuben Tukov <luben.tuikov@amd.com>
Signed-off-by: NDennis Li <Dennis.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Same as other navi asics.
Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently navy_flounder only supports backdoor loading type.
Will switch to psp load type when psp is ready.
Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support for psp firmware header version v1_3 initialization and
information print.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Copy mes firmware to gpu buffer.
Signed-off-by: NJack Xiao <Jack.Xiao@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Same as Navi1x.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reporting the fw_version just returns 0, the actual version is kept as
ta_*_ucode_version. This is the same as the feature reported in
the amdgpu_firmware_info debugfs file.
Signed-off-by: NKent Russell <kent.russell@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The DMCUB is a secondary DMCU (Display MicroController Unit) that has
its own separate firmware. It's required for DMCU support on Renoir.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Front door firmware loading is done via the psp rather than the
driver.
Signed-off-by: NLe Ma <le.ma@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

By default, set amdgpu ucode type to AMDGPU_FW_LOAD_PSP.
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. Add psp ip block
2. Use direct loading type by default and it can also config psp
   loading type.
3. Bypass sos fw loading and xgmi&ras interface

v2: drop TA loading
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch sets fw load type as direct for renoir for the moment.
Will switch to psp when psp is ready.
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Same as other navi asics.
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>