If rockchip_pcm_platform_register() fails, e.g. upon deferring to wait
for an absent DMA channel, we return without disabling RPM, which makes
subsequent re-probe attempts scream with errors about the unbalanced
enable. Don't do that.

Fixes: ebb75c0b ("ASoC: rockchip: i2s: Adjust devm usage")
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/bcb12a849a05437fb18372bc7536c649b94bdf07.1570029862.git.robin.murphy@arm.comSigned-off-by: NMark Brown <broonie@kernel.org>

User space always expects to be able to read ALSA controls, so ensure
no kcontrols are generated without an appropriate READ flag. In the case
of a read of such a control zeros will be returned.
Signed-off-by: NStuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191002084240.21589-1-ckeepax@opensource.cirrus.comSigned-off-by: NMark Brown <broonie@kernel.org>

When removing sof module the support_button_press function will oops
because hp_jack pointer is not checked for NULL. So add a check to fix
this.
Signed-off-by: NJaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927201408.925-2-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

When removing sof module the rt5682 jack handler will oops
if jack detection is not disabled. So add remove function,
which disables the jack detection.
Signed-off-by: NJaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927201408.925-5-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Implement NULL handler in set_jack function to disable
irq's.
Signed-off-by: NJaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927201408.925-4-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

dmic map can only be added when dmic dai link is present.
Signed-off-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927201408.925-3-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

There is a known issue on some Intel platforms which causes
pause/release to run into xrun's during capture usecases.
The suggested workaround to address the issue is to
disable the entry of lower power L1 state in the physical
DMI link when there is a capture stream open.
Signed-off-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-14-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

FW mailbox offset was not set before use and HDR size was not validated.
Fix this.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-12-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

The "snd_pcm_substream" handle was not initialized properly
in hda-loader.c for firmware load.

When the HDA DMAs were used to load the firmware,
the interrupts related to firmware load also triggered
calls to snd_sof_pcm_period_elapsed() on a non-existent ALSA
PCM stream.

This caused runtime kernel warnings from
pcm_lib.c:snd_pcm_period_elapsed().
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-11-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

The old STOP sequence is: 1. stop DMA 2. send STOP ipc
If delay happen before the steps 1 and 2, the DMA buffer will be empty in
short time and cause pipeline xrun then stop the pipeline.
Then the step 2 ipc stop will return error as pipeline is already stopped.

Suggested change to avoid the issue is to switch the order of steps 1 and 2
for the stop sequence.
Signed-off-by: NPan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-7-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Fix a bug in sof_pcm_hw_free() where some cleanup actions were
skipped if STREAM_PCM_FREE IPC was already successfully sent to
DSP when the stream was stopped or suspended. This is incorrect
as hw_free should clean up also other resources, including pcm
lib page allocations, period elapsed work queue and call to
platform hw_free.

Fixes: c29d96c3b9b4 ("ASoC: SOF: reset DMA state in prepare")
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-6-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

We are using sof_parse_word_tokens() to parse tokens with
bool/byte/short/word tuple types, here add the missing check, to fix the
parsing failure at byte/bool tuple types.
Signed-off-by: NKeyon Jie <yang.jie@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-3-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

When we fail to boot the firmware, we encounter a kernel oops in
hda_dsp_get_registers(), which is called conditionally in
hda_dsp_dump() when the sdev_>boot_complete flag is set.

Setting this flag _after_ dumping the data fixes the issue and does
not change the programming flow.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-2-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Fix potential NULL pointer dereference for alg_region in
wm_adsp_buffer_parse_legacy. In practice this can never happen as
loading the firmware should have failed at the wm_adsp2_setup_algs
stage, however probably better for the code to be robust against
future changes and this is more helpful for static analysis.
Signed-off-by: NLi Xu <li.xu@cirrus.com>
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191001130911.19238-1-ckeepax@opensource.cirrus.comSigned-off-by: NMark Brown <broonie@kernel.org>

Below Oops is caused in a system which uses ACPI instead of device node:

of_get_named_gpiod_flags: can't parse 'maxim,reset-gpio' property of node '(null)[0]'
BUG: kernel NULL pointer dereference, address: 0000000000000010

This patch avoids NULL pointer deferencing by adding a check before parsing
and initializes to make reset-gpio pin as invalid.
Signed-off-by: NSathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: NJairaj Arava <jairaj.arava@intel.com>
Link: https://lore.kernel.org/r/1569702150-11976-1-git-send-email-sathyanarayana.nujella@intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

The "template.id" variable is an enum and in this context GCC will
treat it as an unsigned int so it can never be less than zero.

Fixes: 8a978234 ("ASoC: topology: Add topology core")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190925110624.GR3264@mwandaSigned-off-by: NMark Brown <broonie@kernel.org>

There were a couple places where the return value wasn't assigned so the
error handling wouldn't trigger.

Fixes: 5c0769af ("ASoC: soc-dai: add snd_soc_dai_bespoke_trigger()")
Fixes: 95aef355 ("ASoC: soc-dai: add snd_soc_dai_trigger()")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190923142257.GB31251@mwandaSigned-off-by: NMark Brown <broonie@kernel.org>

In case of WM1811 device there are currently being registered controls
referring to registers not existing on that device.
It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2
Volume" controls was failing during ALSA state restoring at boot time:
 "amixer: Mixer hw:0 load error: Device or resource busy"

Reading some registers through I2C was failing with EBUSY error and
indeed these registers were not available according to the datasheet.

To fix this controls not available on WM1811 are moved to a separate
array and registered only for WM8994 and WM8958.

There are some further differences between WM8994 and WM1811,
e.g. registers 603h, 604h, 605h, which are not covered in this patch.
Acked-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20190920130218.32690-2-s.nawrocki@samsung.comSigned-off-by: NMark Brown <broonie@kernel.org>

Ensure there is no OF node references kept when the driver
is removed/unbound.
Reviewed-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20190920130218.32690-3-s.nawrocki@samsung.comSigned-off-by: NMark Brown <broonie@kernel.org>

SND_SOC_DM365_VOICE_CODEC is a 'bool' option in a choice statement,
meaning it cannot be set to =m, but it selects two other drivers
that we may want to be loadable modules after all:

WARNING: unmet direct dependencies detected for SND_SOC_CQ0093VC
  Depends on [m]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m]
  Selected by [y]:
  - SND_SOC_DM365_VOICE_CODEC [=y] && <choice>
  Selected by [m]:
  - SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y]

Add an intermediate symbol that sets SND_SOC_CQ0093VC and
MFD_DAVINCI_VOICECODEC to =m if SND_SOC=m.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190920075046.3210393-1-arnd@arndb.deSigned-off-by: NMark Brown <broonie@kernel.org>

24 bits is supported in all modes and 16 bit only when the codec is slave
and the DAI is set to RIGHT_J.

Remove the unsupported sample format.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190919071652.31724-1-peter.ujfalusi@ti.comSigned-off-by: NMark Brown <broonie@kernel.org>

commit a0a4bf57 ("ASoC: core: delete component->card_list in soc_remove_component only")
was trying to fix a kernel oops when list_del was called twice without
re-init the list. Use list_del_init() can solve it, too. Besides, it
will be more readable if we cleanup all component related resource at
soc_cleanup_component().
Suggested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NBard liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20190918133131.15045-1-yung-chuan.liao@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

SSI need to use rsnd_channel_normalization() for TDM-split mode,
thus, channel check need to do after that.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l1aw39d.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

A potential bug was reported in the email "[BUG] atmel_ssc_dai: a
possible sleep-in-atomic bug in atmel_ssc_shutdown"[1]

Indeed in the function atmel_ssc_shutdown() free_irq() was called in a
critical section protected by spinlock.

However this spinlock is only used in atmel_ssc_shutdown() and
atmel_ssc_startup() functions. After further analysis, it occurred that
the call to these function are already protected by mutex used on the
calling functions.

Then we can remove the spinlock which will fix this bug as a side
effect. Thanks to this patch the following message disappears:

"BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:909"

[1]: https://www.spinics.net/lists/alsa-devel/msg71286.htmlReviewed-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20190918100344.23629-1-gregory.clement@bootlin.comSigned-off-by: NMark Brown <broonie@kernel.org>

We add component->card_list in the end of soc_probe_component(). In
other words, component->card_list will not be added if there is an
error in the soc_probe_component() function. So we can't delete
component->card_list in the error handling of soc_probe_component().

Fixes: 22d14231 ("ASoC: soc-core: add soc_cleanup_component()")
Signed-off-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916210353.6318-1-yung-chuan.liao@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

EDMA requires the period size to be multiple of maxburst. Otherwise the
remaining bytes are not transferred and thus noise is produced.

We can handle this issue by adding a constraint on
SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.
Signed-off-by: NMihai Serban <mihai.serban@nxp.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190913192807.8423-2-daniel.baluta@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

Remove excess semicolon after closing parenthesis.
Signed-off-by: NSaiyam Doshi <saiyamdoshi.in@gmail.com>
Link: https://lore.kernel.org/r/20190914031133.GA28447@SDSigned-off-by: NMark Brown <broonie@kernel.org>

This is to allow machine drivers to set a certain bitclk rate
which might not be exactly rate * frame size.

Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: NViorel Suman <viorel.suman@nxp.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190830215910.31590-1-daniel.baluta@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

All these functions declares and initializes variable ret with
'0' and without modifying 'ret' variable, it is returned.

This patch removes this redundancy and returns '0' directly.
Signed-off-by: NSaiyam Doshi <saiyamdoshi.in@gmail.com>
Link: https://lore.kernel.org/r/20190909174541.GA22718@SDSigned-off-by: NMark Brown <broonie@kernel.org>

Add an op in hdmi_codec_ops so codec driver can register callback
function to handle plug event.

Driver in DRM can use this callback function to report connector status.
Signed-off-by: NCheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190717083327.47646-2-cychiang@chromium.orgReviewed-by: NTzung-Bi Shih <tzungbi@google.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF,
we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE.
MICBIAS control bits are left unchanged.

This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS
control bits will be cleared at suspend and never turned back on again,
since DAPM thinks the widget is always on.
Signed-off-by: NBen Zhang <benzh@chromium.org>
Signed-off-by: NCurtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-3-cujomalainey@chromium.orgSigned-off-by: NMark Brown <broonie@kernel.org>

In order to simplify understanding what register values are being
written to the codec for debugging more advanced features (such as
hotwording) it is best to remove magic numbers
Signed-off-by: NCurtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-2-cujomalainey@chromium.orgSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_unbind_aux_dev() implementation is very half,
thus it is very unreadable.

	for_each_comp_order(order) {
		for_each_card_auxs_safe(card, comp, _comp) {

(1)			if (comp->driver->remove_order == order) {
				...
=>				soc_unbind_aux_dev(comp);
			}
	}

soc_unbind_aux_dev() itself is not related to remove_order (1).
And, it is called from soc_remove_aux_devices(), even though
its paired function soc_bind_aux_dev() is called from
snd_soc_instantiate_card().
It is very unbalance, and very difficult to understand.

This patch do
1) update soc_bind_aux_dev() to self contained
2) call it from soc_cleanup_card_resources() to make up balance
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r24wor0z.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

soc-core.c has soc_bind_aux_dev(), but, there is no its paired
soc_unbind_aux_dev().
This patch adds soc_unbind_aux_dev().
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgpcor14.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_bind_aux_dev() implementation is very half,
thus it is very unreadable.

	for_each_card_pre_auxs(xxx) {
=>		ret = soc_bind_aux_dev(xxx);
		...
	}

This patch does all for_each_xxx() under soc_bind_aux_dev(),
and makes it to self contained.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv9sor1b.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

This patch moves soc_probe_link_dais() next to soc_remove_link_dais()
which is paired function.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9u8or1g.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_probe_link_dais() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx)
=>			soc_probe_link_dais(xxx);
	}

This patch does all for_each_xxx() under soc_probe_link_dais(),
and makes it to self contained.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87woeoor1m.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_probe_link_dais() (1) is called under probe_order (2),
and it will initialize dai_link related settings at *Last* turn (3)(B).
It is very complex code.

	static int soc_probe_link_dais(..., order)
	{
(A)		/* probe DAIs here */
		...

(3)		if (order != SND_SOC_COMP_ORDER_LAST)
			return 0;

(B)		/* initialize dai_link related settings */
		...
	}

	static int snd_soc_instantiate_card(...)
	{
		...
(2)		for_each_comp_order(order) {
			for_each_card_rtds(...) {
(1)				ret = soc_probe_link_dais(..., order);
			}
		}
	}

This patch separes soc_probe_link_dais() into "DAI probe" portion (A),
and dai_link settings portion (B).
The later is named as soc_link_init() by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2z4or1r.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

This patch moves soc_probe_dai() next to soc_remove_dai() which is
paired function.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhjkor1x.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_remove_link_dais() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx)
=>			soc_remove_link_dais(xxx);
	}

This patch does all for_each_xxx() under soc_remove_link_dais(),
and makes it to self contained.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rwwq5mm.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>