Define pr_fmt and add some pr_debug prints.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Change || check to the intended && when checking the QP type in a
received connection request against the listening endpoint.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The dev->sgid_tbl[] array is allocated in ocrdma_alloc_resources().
It has OCRDMA_MAX_SGID elements so the test here is off by one.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix RQ/SRQ error CQE polling.  Return error CQE to consumer for error
case which was not returned previously.
Signed-off-by: NParav Pandit <parav.pandit@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix max sge calculation for sq, rq, srq for all hardware types.
Signed-off-by: NMahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix code to read the max wqe and max rqe values from mailbox response.
Signed-off-by: NMahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1. Fix reporting GID table addition events.
2. Enable vlan based GID entries only when VLAN is enabled at compile
   time (test CONFIG_VLAN_8021Q / CONFIG_VLAN_8021Q_MODULE).
Signed-off-by: NParav Pandit <parav.pandit@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1. Limit the max number of WQEs per QP reported when querying the
   device, so that ib_create_qp() will not fail for a QP size that the
   device claimed to support due to additional headroom WQEs being
   allocated.

2. Limit qp resources accepted for ib_create_qp() to the limits
   reported in ib_query_device().  In kernel space, make sure that the
   limits returned to the caller following qp creation also lie within
   the reported device limits. For userspace, report as before, and do
   adjustment in libmlx4 (so as not to break ABI).
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NSagi Grimberg <sagig@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit e605b743 ("IB/mlx4: Increase the number of vectors (EQs)
available for ULPs") didn't handle correctly the case where there
aren't enough MSI-X vectors to increase the number of EQs, so only the
legacy EQs are allocated.  This results in an attempt to memset() to
zero the EQ table which was never allocated and a kernel crash.

Fix this by checking in the teardown flow if the table of EQs was ever
allocated.  Also remove some unneeded setting to zero of the EQ
related fields in struct mlx4_ib_dev.
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When using rping -c -a 0.0.0.0 with iw_cxgb4, the system crashes when
rdma_connect() is called.  ip_dev_find() will return NULL, but pdev is
accessed anyway.

Checking that pdev is NULL and returning -ENODEV prevents the system
from crashing.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

"make versioncheck" shows:

    drivers/infiniband/hw/ocrdma/ocrdma_main.c: 29 linux/version.h not needed.
    drivers/infiniband/hw/ocrdma/ocrdma_verbs.h: 31 linux/version.h not needed.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NParav Pandit <parav.pandit@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Correct queue free count math for SQ, RQ for all hardware type.
Update user-kernel ABI interface.
Signed-off-by: NParav Pandit <parav.pandit@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

We need to use a different loop index for mlx4_counter_alloc() and for
device_create_file() iterations: the mlx4_counter_alloc() loop index
is used in the error flow to free counters.

If the same loop index is used for device_create_file() and, say, the
device_create_file() loop fails on the first iteration, the allocated
counters will not be freed.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The current error flow code was releasing the IB connection object and
calling iscsi_destroy_endpoint() directly without going through the
reference counting mechanism introduced in commit 39ff05db ("IB/iser:
Enhance disconnection logic for multi-pathing"). This resulted in a
double free of the iscsi endpoint object, which causes a kernel NULL
pointer dereference.  Fix that by plugging into the IB conn reference
counting correctly.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Enable IB ULPs to use a larger portion of the device EQs (which map to
IRQs).  The mlx4_ib driver follows the mlx4_core framework of the EQs
to be divided among the device ports.  In this scheme, for each IB
port, the number of allocated EQs follows the number of cores, subject
to other system constraints, such as number available MSI-X vectors.
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This allows querying the QP state before flushing.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Using kfifos for ID management was limiting the number of QPs and
preventing NP384 MPI jobs.  So replace it with a simple bitmap
allocator.

Remove IDs from the IDR tables before deallocating them.  This bug was
causing the BUG_ON() in insert_handle() to fire because the ID was
getting reused before being removed from the IDR table.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This allows dumping thousands of QPs.  Log active open failures of
interest.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add module option db_fc_threshold which is the count of active QPs
that trigger automatic db flow control mode.  Automatically transition
to/from flow control mode when the active qp count crosses
db_fc_theshold.

Add more db debugfs stats

On DB DROP event from the LLD, recover all the iwarp queues.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Use GFP_ATOMIC in _insert_handle() if ints are disabled.

Don't panic if we get an abort with no endpoint found.  Just log a
warning.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Get FULL/EMPTY/DROP events from LLD.  On FULL event, disable normal
user mode DB rings.

Add modify_qp semantics to allow user processes to call into the
kernel to ring doobells without overflowing.

Add DB Full/Empty/Drop stats.

Mark queues when created indicating the doorbell state.

If we're in the middle of db overflow avoidance, then newly created
queues should start out in this mode.

Bump the C4IW_UVERBS_ABI_VERSION to 2 so the user mode library can
know if the driver supports the kernel mode db ringing.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Log a warning and drop the abort message.  Otherwise we will do a
bogus wake_up() and crash.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This fixes a race where an ingress abort fails to wake up the thread
blocked in rdma_init() causing the app to hang.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Don't call the ibqp event_handler pointer in the case it wasn't initialized.
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NDonald Wood <Donald.E.Wood@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Set ORD value of the connecting peer to be at least one in order to
accommodate an RDMA READ Request message.
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NDonald Wood <Donald.E.Wood@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch reorganizes the QP and devdata files to be more cache line aware.

qib_qp fields in particular are split into read-mostly, send, and receive fields.

qib_devdata fields are split into read-mostly and read/write fields

Testing has show that bidirectional tests improve by as much as 100%
with this patch.
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If a MAD is sent directly to the local HCA rather than placed on a QP
and the MAD fails M_Key checks, there is no means to generate a
timeout for the client, which may hang.  Instead we report
IB_MAD_RESULT_FAILURE, which operates the same for on-the-wire
packets, but will generate a send failure back to the client.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJim Foraker <foraker1@llnl.gov>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If a port has an M_Key lease set, the M_Key protect bits set to 1, and
a SubnSet arrives with an invalid M_Key, an M_Key mismatch trap is
generated, the lease timer begins as expected, and eventually the
M_Key protect bits will be set back to 0 as per the spec.  However, if
any other SMP with an invalid M_Key arrives, the lease timer is expired
and the M_Key protect bits remain in force.

This is not according to to spec.  In particular, C14-17 says that
a lease timer that is underway is not affected by protection level
checks (ie, at protection level 1, a SubnGet with a bad M_Key may be
successful, but does not stop the timer), and C14-19 says that the timer
shall stop when a valid M_Key has been received.  C14-19 is the only
compliance statement that specifies a stopping condition for the timer.

This behavior is magnified if the port's Master SM LID attribute
points at itself.  In that case, the M_Key mismatch trap is sufficient to
expire the timer, and the mkey lease attribute is rendered useless.
Reviewed-by: NRam Vepa <ram.vepa@qlogic.com>
Signed-off-by: NJim Foraker <foraker1@llnl.gov>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The SERDES was using the incorrect Frequency Loop Bandwidth setting
causing the link to cycle through the Physical link negotiation state
machine.  Fixing the Frequency Loop Bandwidth setting in the SERDES
helps the link come up faster and more reliably.
Signed-off-by: NMitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

A "fix" for a bug with the number of contexts on a single-port board
caused the calculation to be off by one, which causes problems with
the upper layers.  The same problem exists for number of free
contexts, which is also fixed here.
Signed-off-by: NMitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When a port first goes active with SMA Set(PortInfo) and reregister
bit set, the driver sends up the reregister event followed by a port
active event.

The problem is that in response to reregister event most apps try to
issue a SA query of some sort, but that fails because port is not
active.

The qib driver needs to a trivial change to correct this behavior.

This issue has been there for a while; however the recent serdes work
has probably made the delay between the reregister event and the
active event larger and hence opened the race far enough so that its
being seen more often.

The patch also changes the clientrereg local to a u8 and saves off the
rereg bit into it.  The code following the nested subn_get_portinfo()
now restores that bit per o14-12.2.1 with a logical OR from that copy.
Reviewed-by: NRam Vepa <ram.vepa@qlogic.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch optimizes pio buffer allocation in the kernel.

For qib, kernel pio buffers are used for sending acks.  The code to
allocate the buffer would always start at 0 until it found a buffer.

This means that an average of 64 comparisions were done on each
allocate, since the busy bit won't be cleared until the bits are
refreshed when buffers are exhausted.

This patch adds two new fields in the devdata struct, last_pio and
min_kernel_pio.  last_pio is the last buffer that was allocated.
min_kernel_pio is the lowest potential available buffer.

min_kernel_pio is modifed as contexts are allocated and deallocted.
Reviewed-by: NRamkrishna Vepa <ramkrishna.vepa@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add a prefetch call when a packet has been stored.  The nature of the
prefetch is correctly determined by the alternatives mechanism.
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit bc3e53f6 ("mm: distinguish between mlocked and pinned
pages") introduced a separate counter for pinned pages and used it in
the IB stack.  However, in ib_umem_get() the pinned counter is
incremented, but ib_umem_release() wrongly decrements the locked
counter.  Fix this.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>

[ Replace one more printk_once() with pr_info_once().  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Otherwise CM packets going over MLX QP1 get fixed scheduling priority 0.
We want CM packets to get the same scheduling priority, and therefore
map to the same SQ (Schedule Queue) and eventually TC (Traffic Class),
as the application requested for the actual QP used for the connection.
Signed-off-by: NOren Duer <oren@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Implement raw packet QPs for Ethernet ports using the MLX transport (as
done by the mlx4_en Ethernet netdevice driver).
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>