The features values for an rbd format 2 image are fetched from the
server using a "get_features" method.  The same method is used for
getting the features for a snapshot, so structure this addition with
a generic helper routine that can get this information for either.

The server will provide two 64-bit feature masks, one representing
the features potentially in use for this image (or its snapshot),
and one representing features that must be supported by the client
in order to work with the image.

For the time being, neither of these is really used so we keep
things simple and just record the first feature vector.  Once we
start using these feature masks, what we record and what we expose
to the user will most likely change.
Signed-off-by: NAlex Elder <elder@inktank.com>

The object prefix of an rbd format 2 image is fetched from the
server using a "get_object_prefix" method.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The size of an rbd format 2 image is fetched from the server using a
"get_size" method.  The same method is used for getting the size of
a snapshot, so structure this addition with a generic helper routine
that we can get this information for either.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This defines a new function rbd_dev_probe() as a top-level
function for populating detailed information about an rbd device.

It first checks for the existence of a format 2 rbd image id object.
If it exists, the image is assumed to be a format 2 rbd image, and
another function rbd_dev_v2() is called to finish populating
header data for that image.  If it does not exist, it is assumed to
be an old (format 1) rbd image, and calls a similar function
rbd_dev_v1() to populate its header information.

A new field, rbd_dev->format, is defined to record which version
of the rbd image format the device represents.  For a valid mapped
rbd device it will have one of two values, 1 or 2.

So far, the format 2 images are not really supported; this is
laying out the infrastructure for fleshing out that support.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a function that encapsulates looking up the name, size and
features related to a given snapshot, which is indicated by its
index in an rbd device's snapshot context array of snapshot ids.

This interface will be used to hide differences between the format 1
and format 2 images.

At the moment this (looking up the name anyway) is slightly less
efficient than what's done currently, but we may be able to optimize
this a bit later on by cacheing the last lookup if it proves to be a
problem.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Record the features values for each rbd image and each of its
snapshots.  This is really something that only becomes meaningful
for version 2 images, so this is just putting in place code
that will form common infrastructure.

It may be useful to expand the sysfs entries--and therefore the
information we maintain--for the image and for each snapshot.
But I'm going to hold off doing that until we start making
active use of the feature bits.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Pass the snapshot id and snapshot size rather than an index
to __rbd_add_snap_dev() to specify values for a new snapshot.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Josh proposed the following change, and I don't think I could
explain it any better than he did:

    From: Josh Durgin <josh.durgin@inktank.com>
    Date: Tue, 24 Jul 2012 14:22:11 -0700
    To: ceph-devel <ceph-devel@vger.kernel.org>
    Message-ID: <500F1203.9050605@inktank.com>

    Right now the kernel still has one piece of rbd management
    duplicated from the rbd command line tool: snapshot creation.
    There's nothing special about snapshot creation that makes it
    advantageous to do from the kernel, so I'd like to remove the
    create_snap sysfs interface.  That is,
	/sys/bus/rbd/devices/<id>/create_snap
    would be removed.

    Does anyone rely on the sysfs interface for creating rbd
    snapshots?  If so, how hard would it be to replace with:

	rbd snap create pool/image@snap

    Is there any benefit to the sysfs interface that I'm missing?

    Josh

This patch implements this proposal, removing the code that
implements the "snap_create" sysfs interface for rbd images.
As a result, quite a lot of other supporting code goes away.
Suggested-by: NJosh Durgin <josh.durgin@inktank.com>
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

New format 2 rbd images are permanently identified by a unique image
id.  Each rbd image also has a name, but the name can be changed.
A format 2 rbd image will have an object--whose name is based on the
image name--which maps an image's name to its image id.

Create a new function rbd_dev_image_id() that checks for the
existence of the image id object, and if it's found, records the
image id in the rbd_device structure.

Create a new rbd device attribute (/sys/bus/rbd/<num>/image_id) that
makes this information available.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define constant symbols related to the rbd format 2 object names.
This begins to bring this version of the "rbd_types.h" header
more in line with the current user-space version of that file.
Complete reconciliation of differences will be done at some
point later, as a separate task.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An OSD object method call can be made using rbd_req_sync_exec().
Until now this has only been used for creating a new RBD snapshot,
and that has only required sending data out, not receiving anything
back from the OSD.

We will now need to get data back from an OSD on a method call, so
add parameters to rbd_req_sync_exec() that allow a buffer into which
returned data should be placed to be specified, along with its size.

Previously, rbd_req_sync_exec() passed a null pointer and zero
size to rbd_req_sync_op(); change this so the new inbound buffer
information is provided instead.

Rename the "buf" and "len" parameters in rbd_req_sync_op() to
make it more obvious they are describing inbound data.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In order to allow both read requests and write requests to be
initiated using rbd_req_sync_exec(), add an OSD flags value
which can be passed down to rbd_req_sync_op().  Rename the "data"
and "len" parameters to be more clear that they represent data
that is outbound.

At this point, this function is still only used (and only works) for
write requests.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

We're ready to handle header object (refresh) events at the point we
call rbd_bus_add_dev().  Set up the watch request on the rbd image
header just after that, and after we've registered the devices for
the snapshots for the initial snapshot context.  Do this before
announce the disk as available for use.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Move the setting of the initial capacity for an rbd image mapping
into rb_init_disk().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

By the time rbd_dev_snaps_register() gets called during rbd device
initialization, the main device will have already been registered.
Similarly, a header refresh will only occur for an rbd device whose
Linux device is registered.  There is therefore no need to verify
the main device is registered when registering a snapshot device.

For the time being, turn the check into a WARN_ON(), but it can
eventually just go away.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Call rbd_init_disk() from rbd_add() as soon as we have the major
device number for the mapping.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Hold off setting the device id and formatting the device name
in rbd_add() until just before it's needed.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Read the rbd header information and call rbd_dev_set_mapping()
earlier--before registering the block device or setting up the sysfs
entries for the image.  The sysfs entries provide users access to
some information that's only available after doing the rbd header
initialization, so this will make sure it's valid right away.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

rbd_header_set_snap() is a simple initialization routine for an rbd
device's mapping.  It has to be called after the snapshot context
for the rbd_dev has been updated, but can be done before snapshot
devices have been registered.

Change the name to rbd_dev_set_mapping() to better reflect its
purpose, and call it a little sooner, before registering snapshot
devices.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When a new snapshot is found in an rbd device's updated snapshot
context, __rbd_add_snap_dev() is called to create and insert an
entry in the rbd devices list of snapshots.  In addition, a Linux
device is registered to represent the snapshot.

For version 2 rbd images, it will be undesirable to initialize the
device right away.  So in anticipation of that, this patch separates
the insertion of a snapshot entry in the snaps list from the
creation of devices for those snapshots.

To do this, create a new function rbd_dev_snaps_register() which
traverses the list of snapshots and calls rbd_register_snap_dev()
on any that have not yet been registered.

Rename rbd_dev_snap_devs_update() to be rbd_dev_snaps_update()
to better reflect that only the entry in the snaps list and not
the snapshot's device is affected by the function.

For now, call rbd_dev_snaps_register() immediately after each
call to rbd_dev_snaps_update().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Move the assignment of the header name for an rbd image a bit later,
outside rbd_add_parse_args() and into its caller.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An rbd_dev structure maintains a list of current snapshots that have
already been fully initialized.  The entries on the list have type
struct rbd_snap, and each entry contains a copy of information
that's found in the rbd_dev's snapshot context and header.

The only caller of snap_by_name() is rbd_header_set_snap().  In that
call site any positive return value (the index in the snapshot
array) is ignored, so there's no need to return the index in
the snapshot context's id array when it's found.

rbd_header_set_snap() also has only one caller--rbd_add()--and that
call is made after a call to rbd_dev_snap_devs_update().  Because
the rbd_snap structures are initialized in that function, the
current snapshot list can be used instead of the snapshot context to
look up a snapshot's information by name.

Change snap_by_name() so it uses the snapshot list rather than the
rbd_dev's snapshot context in looking up snapshot information.
Return 0 if it's found rather than the snapshot id.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When rbd_bus_add_dev() is called (one spot--in rbd_add()), the rbd
image header has not even been read yet.  This means that the list
of snapshots will be empty at the time of the call.  As a result,
there is no need for the code that calls rbd_register_snap_dev()
for each entry in that list--so get rid of it.

Once the header has been read (just after returning), a call will
be made to rbd_dev_snap_devs_update(), which will then find every
snapshot in the context to be new and will therefore call
rbd_register_snap_dev() via __rbd_add_snap_dev() accomplishing
the same thing.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Move the calls to get the header semaphore out of
rbd_header_set_snap() and into its caller.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This just simplifies a few things in rbd_init_disk(), now that the
previous patch has moved a bunch of initialization code out if it.
Done separately to facilitate review.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Move some of the code that initializes an rbd header out of
rbd_init_disk() and into its caller.

Move the code at the end of rbd_init_disk() that sets the device
capacity and activates the Linux device out of that function and
into the caller, ensuring we still have the disk size available
where we need it.

Update rbd_free_disk() so it still aligns well as an inverse of
rbd_init_disk(), moving the rbd_header_free() call out to its
caller.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller of snap_by_name(), and it passes two values
to be assigned, both of which are found within an rbd device
structure.

Change the interface so it just passes the address of the rbd_dev,
and make the assignments to its fields directly.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

With the exception of the snapshot name, all of the mapping-specific
fields in an rbd device structure are set in rbd_header_set_snap().

Pass the snapshot name to be assigned into rbd_header_set_snap()
to keep all of the mapping assignments together.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This is the first of two patches aimed at isolating the code that
sets the mapping information into a single spot.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Add the size of the mapped image to the set of mapping-specific
fields in an rbd_device, and use it when setting the capacity of the
disk.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Several fields in a struct rbd_dev are related to what is mapped, as
opposed to the actual base rbd image.  If the base image is mapped
these are almost unneeded, but if a snapshot is mapped they describe
information about that snapshot.

In some contexts this can be a little bit confusing.  So group these
mapping-related field into a structure to make it clear what they
are describing.

This also includes a minor change that rearranges the fields in the
in-core image header structure so that invariant fields are at the
top, followed by those that change.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The "total_snaps" field in an rbd header structure is never any
different from the value of "num_snaps" stored within a snapshot
context.  Avoid any confusion by just using the value held within
the snapshot context, and get rid of the "total_snaps" field.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

A copy of rbd_dev->disk->queue is held in rbd_dev->q, but it's
never actually used.  So get just get rid of the field.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The name __rbd_init_snaps_header() doesn't really convey what that
function does very well.  Its purpose is to scan a new snapshot
context and either create or destroy snapshot device entries so
that local host's view is consistent with the reality maintained
on the OSDs.  This patch just changes the name of this function,
to be rbd_dev_snap_devs_update().  Still not perfect, but I think
better.

Also add some dynamic debug statements to this function.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This should have been done as part of this commit:

    commit de71a297
    Author: Alex Elder <elder@inktank.com>
    Date:   Tue Jul 3 16:01:19 2012 -0500
    rbd: rename rbd_device->id

rbd_id_get() is assigning the rbd_dev->dev_id field.  Change the
name of that function as well as rbd_id_put() and rbd_id_max
to reflect what they are affecting.

Add some dynamic debug statements related to rbd device id activity.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define rbd_assert() and use it in place of various BUG_ON() calls
now present in the code.  By default assertion checking is enabled;
we want to do this differently at some point.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There are two places where rbd_get_segment() is called.  One, in
rbd_rq_fn(), only needs to know the length within a segment that an
I/O request should be.  The other, in rbd_do_op(), also needs the
name of the object and the offset within it for the I/O request.

Split out rbd_segment_name() into three dedicated functions:
    - rbd_segment_name() allocates and formats the name of the
      object for a segment containing a given rbd image offset
    - rbd_segment_offset() computes the offset within a segment for
      a given rbd image offset
    - rbd_segment_length() computes the length to use for I/O within
      a segment for a request, not to exceed the end of a segment
      object.

In the new functions be a bit more careful, checking for possible
error conditions:
    - watch for errors or overflows returned by snprintf()
    - catch (using BUG_ON()) potential overflow conditions
      when computing segment length
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>

It is possible in rbd_get_num_segments() for an overflow to occur
when adding the offset and length.  This is easily avoided.

Since the function returns an int and the one caller is already
prepared to handle errors, have it return -ERANGE if overflow would
occur.

The overflow check would not work if a zero-length request was
being tested, so short-circuit that case, returning 0 for the
number of segments required.  (This condition might be avoided
elsewhere already, I don't know.)

Have the caller end the request if either an error or 0 is returned.
The returned value is passed to __blk_end_request_all(), meaning
a 0 length request is not treated an error.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>

There's a test for null rq pointer inside the while loop in
rbd_rq_fn() that's not needed.  That same test already occurred
in the immediatly preceding loop condition test.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>

In bio_chain_clone(), at the end of the function the bi_next field
of the tail of the new bio chain is nulled.  This isn't necessary,
because if "tail" is non-null, its value will be the last bio
structure allocated at the top of the while loop in that function.
And before that structure is added to the end of the new chain, its
bi_next pointer is always made null.

While touching that function, clean a few other things:
    - define each local variable on its own line
    - move the definition of "tmp" to an inner scope
    - move the modification of gfpmask closer to where it's used
    - rearrange the logic that sets the chain's tail pointer
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>