nvme_fc_create_io_queues() preallocates a big buffer for the IO SGL based
on SG_CHUNK_SIZE.

Modern DMA engines are often capable of dealing with very big segments so
the SG_CHUNK_SIZE is often too big. SG_CHUNK_SIZE results in a static 4KB
SGL allocation per command.

If a controller has lots of deep queues, preallocation for the sg list can
consume substantial amounts of memory. For nvme-fc, nr_hw_queues can be
128 and each queue's depth 128. This means the resulting preallocation
for the data SGL is 128*128*4K = 64MB per controller.

Switch to runtime allocation for SGL for lists longer than 2 entries. This
is the approach used by NVMe PCI so it should be reasonable for NVMeOF as
well. Runtime SGL allocation has always been the case for the legacy I/O
path so this is nothing new.
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

nvme_rdma_alloc_tagset() preallocates a big buffer for the IO SGL based
on SG_CHUNK_SIZE.

Modern DMA engines are often capable of dealing with very big segments so
the SG_CHUNK_SIZE is often too big. SG_CHUNK_SIZE results in a static 4KB
SGL allocation per command.

If a controller has lots of deep queues, preallocation for the sg list can
consume substantial amounts of memory. For nvme-rdma, nr_hw_queues can be
128 and each queue's depth 128. This means the resulting preallocation
for the data SGL is 128*128*4K = 64MB per controller.

Switch to runtime allocation for SGL for lists longer than 2 entries. This
is the approach used by NVMe PCI so it should be reasonable for NVMeOF as
well. Runtime SGL allocation has always been the case for the legacy I/O
path so this is nothing new.

The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
support SG_CHAIN, use only runtime allocation for the SGL.

We didn't notice of a performance degradation, since for small IOs we'll
use the inline SG and for the bigger IOs the allocation of a bigger SGL
from slab is fast enough.
Suggested-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Slip_open doesn't clean-up device which registration failed from the
slip_devs device list. On next open after failure this list is iterated
and freed device is accessed. Fix this by calling sl_free_netdev in error
path.

Here is the trace from the Syzbot:

__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:634
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
sl_sync drivers/net/slip/slip.c:725 [inline]
slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801
tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469
tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596
tiocsetd drivers/tty/tty_io.c:2334 [inline]
tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3b5a3997 ("slip: Fix memory leak in slip_open error path")
Reported-by: syzbot+4d5170758f3762109542@syzkaller.appspotmail.com
Cc: David Miller <davem@davemloft.net>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NJouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function was using configuration of port 0 in devicetree for all ports.
In case CPU port was not 0, the delay settings was ignored. This resulted not
working communication between CPU and the switch.

Fixes: f5b8631c ("net: dsa: sja1105: Error out if RGMII delays are requested in DT")
Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While enqueueing a broadcast skb to port->bc_queue, schedule_work()
is called to add port->bc_work, which processes the skbs in
bc_queue, to "events" work queue. If port->bc_queue is full, the
skb will be discarded and schedule_work(&port->bc_work) won't be
called. However, if port->bc_queue is full and port->bc_work is not
running or pending, port->bc_queue will keep full and schedule_work()
won't be called any more, and all broadcast skbs to macvlan will be
discarded. This case can happen:

macvlan_process_broadcast() is the pending function of port->bc_work,
it moves all the skbs in port->bc_queue to the queue "list", and
processes the skbs in "list". During this, new skbs will keep being
added to port->bc_queue in macvlan_broadcast_enqueue(), and
port->bc_queue may already full when macvlan_process_broadcast()
return. This may happen, especially when there are a lot of real-time
threads and the process is preempted.

Fix this by calling schedule_work(&port->bc_work) even if
port->bc_work is full in macvlan_broadcast_enqueue().

Fixes: 412ca155 ("macvlan: Move broadcasts into a work queue")
Signed-off-by: NMenglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ENETC hardware support the Credit Based Shaper(CBS) which part
of the IEEE-802.1Qav. The CBS driver was loaded by the sch_cbs
interface when set in the QOS in the kernel.

Here is an example command to set 20Mbits bandwidth in 1Gbits port
for taffic class 7:

tc qdisc add dev eth0 root handle 1: mqprio \
	   num_tc 8 map 0 1 2 3 4 5 6 7 hw 1

tc qdisc replace dev eth0 parent 1:8 cbs \
	   locredit -1470 hicredit 30 \
	   sendslope -980000 idleslope 20000 offload 1
Signed-off-by: NPo Liu <Po.Liu@nxp.com>
Reviewed-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add helpers to make locking/unlocking the MDIO bus easier.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Geert Uytterhoeven reported that using devm_reset_controller_get leads
to a WARNING when probing a reset-controlled PHY. This is because the
device devm_reset_controller_get gets supplied is not actually the
one being probed.

Acquire an unmanaged reset-control as well as free the reset_control on
unregister to fix this.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
CC: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid Bauer <mail@david-bauer.net>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This enables the use of SW timestamping.

ax88179_178a uses the usbnet transmit function usbnet_start_xmit() which
implements software timestamping. ax88179_178a overrides ethtool_ops but
missed to set .get_ts_info. This caused SOF_TIMESTAMPING_TX_SOFTWARE
capability to be not available.
Signed-off-by: NAndreas K. Besslein <besslein.andreas@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

When mlxsw_sp_adj_discard_write() is called for the first time, the
value stored in 'mlxsw_sp->router->adj_discard_index' is invalid, as
indicated by 'mlxsw_sp->router->adj_discard_index_valid' being set to
'false'.

In this case, we should not use the value initially stored in
'mlxsw_sp->router->adj_discard_index' (0) and instead use the value
allocated later in the function.

Fixes: 983db619 ("mlxsw: spectrum_router: Allocate discard adjacency entry when needed")
Signed-off-by: NAmit Cohen <amitc@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

When a GRE tunnel is bound to an underlay netdevice and that netdevice is
moved to a different VRF, that could cause two tunnels to have the same
underlay local address in the same VRF. Linux in this situation dispatches
the traffic according to the tunnel key (or lack thereof), but that cannot
be offloaded to Spectrum devices.

Detect this situation and unoffload the two impacted tunnels when it
happens.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Use the same bnxt_flash_package_from_file() function to support
devlink flash operation.

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Currently, the driver does not allow PHY settings on a multi-function or
NPAR NIC whose port is shared by more than one function.  Newer
firmware now allows PHY settings on some of these NICs.  Check for
this new firmware setting and allow the user to set the PHY settings
accordingly.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

If the link settings have been changed by another function sharing the
port, firmware will send us an async. message.  In response, we will
call the new bnxt_init_ethtool_link_settings() function to update
the current settings.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Refactor this logic in bnxt_probe_phy() into a separate function
bnxt_init_ethtool_link_settings().  It used to be that the settable
link settings will never be changed without going through ethtool.
So we only needed to do this once in bnxt_probe_phy().  Now, another
function sharing the port may change it and we may need to re-initialize
the ethtool settings again in run-time.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

New firmware allows PHY loopback to be set without disabling autoneg
first.  Check this capability and skip disabling autoneg when
it is supported by firmware.  Using this scheme, loopback will
always work even if the PHY only supports autoneg.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

The driver currently only assignes 1 RSS context to each VF.  This works
for the Linux VF driver.  But other drivers, such as DPDK, can make use
of additional RSS contexts.  Modify the code to divide up and assign
RSS contexts to VFs just like other resources.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Some chips that need host context memory as a backing store requires
the memory to be initialized to a non-zero value.  Query the
value from firmware and initialize the context memory accordingly.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Driver calls HWRM_FUNC_RESET firmware call while resuming the device
which clears the context memory backing store. Because of which
allocating firmware resources would eventually fail. Fix it by freeing
all context memory during suspend and reallocate the memory during resume.

Call bnxt_hwrm_queue_qportcfg() in resume path.  This firmware call
is needed on the 57500 chips so that firmware will set up the proper
queue mapping in relation to the context memory.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

After driver unregister, firmware is erasing the information that
driver supports new resource management. Send FUNC_RESOURCE_QCAPS
command to inform the firmware that driver supports new resource
management while resuming from hibernation.  Otherwise, we fallback
to the older resource allocation scheme.

Also, move driver register after sending FUNC_RESOURCE_QCAPS command
to be consistent with the normal initialization sequence.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Everytime driver registers with firmware, driver is required to
register for async event notifications as well. These 2 calls
are done using the same firmware command and can be combined.

We are also missing the 2nd step to register for async events
in the suspend/resume path and this will fix it.  Prior to this,
we were getting only default notifications.

ULP can register for additional async events for the RDMA driver,
so we add a parameter to the new function to only do step 2 when
it is called from ULP.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

In the bnxt_init_one() failure path, if the driver has already called
firmware to register the driver, it is not undoing the driver
registration.  Add this missing step to unregister for correctness,
so that the firmware knows that the driver has unloaded.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Disable Bus master during suspend to prevent DMAs after the device
goes into D3hot state.  The new 57500 devices may continue to DMA
from context memory after the system goes into D3hot state.  This
may cause some PCIe errors on some system.  Re-enable it during resume.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Fix BNXT_CHIP_NUM_5645X() to include 57452 and 56454 chip IDs, so
that these chips will be properly classified as P4 chips to take
advantage of the P4 fixes and features.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

The rfs members of struct efx_channel are under CONFIG_RFS_ACCEL.
Ethtool stats which access those need to be as well.
Reported-by: Nkbuild test robot <lkp@intel.com>
Fixes: ca70bd42 ("sfc: add statistics for ARFS")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

The recording of RSS hash should be controlled by NETIF_F_RXHASH.

Fixes: 1fac7ca4 ("hv_netvsc: record hardware hash in skb")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Rename the mac_link_state() method to mac_pcs_get_state() to make it
clear that it should be returning the MACs PCS current state, which
is used for inband negotiation rather than just reading back what the
MAC has been configured for. Update the documentation to explicitly
mention that this is for inband.

We drop the return value as well; most of phylink doesn't check the
return value and it is not clear what it should do on error - instead
arrange for state->link to be false.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

rhashtable_lookup_fast() internally calls rcu_read_lock() then,
calls rhashtable_lookup(). So if rcu_read_lock() is already held,
rhashtable_lookup() is enough.
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.

There is a window at initialisation time where we may report link
down using the 0/-1 values.  Tidy this up and use the predefined
constants, so debug doesn't complain with:

"Unsupported (update phy-core.c)/Unsupported (update phy-core.c)"

when the speed and duplex settings are printed.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

There are no users of phy_ethtool_sset() in the kernel anymore, and
as of commit 3c1bcc86 ("net: ethernet: Convert phydev advertize
and supported from u32 to link mode"), the implementation is slightly
buggy - it doesn't correctly check the masked advertising mask as it
used to.

Remove it, and update the phy documentation to refer to its replacement
function.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

If there's no traffic on a channel, its ARFS expiry work will never get
 scheduled by efx_poll() as that isn't being run.
So make efx_filter_rfs_expire() reschedule itself to run after 30 seconds.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Report the number of successful and failed insertions, and also the
 current count of filters, to aid in tuning e.g. rps_flow_cnt.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

In high connection count usage, the NIC's filter table may be filled with
 sufficiently many ARFS filters that further insertions fail.  As this
 does not represent a correctness issue, do not log the resulting MCDI
 errors.  Add a debug-level message under the (by default disabled)
 rx_status category instead; and take the opportunity to do a little extra
 expiry work.

Since there are now multiple workitems able to call __efx_filter_rfs_expire
 on a given channel, it is possible for them to race and thus pass quotas
 which, combined, exceed rfs_filter_count.  Thus, don't WARN_ON if we loop
 all the way around the table with quota left over.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Tested-by: NDavid Ahern <dahern@digitalocean.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

The old rfs_filters_added method for determining the quota could potentially
 allow the NIC to become filled with old filters, which never get tested for
 expiry.  Instead, explicitly make expiry check work depend on the number of
 filters installed, and don't count checking slots without filters in as
 doing work.  This guarantees that each filter will be checked for expiry at
 least once every thirty seconds (assuming the channel to which it belongs is
 NAPI polling actively) regardless of fill level.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Tested-by: NDavid Ahern <dahern@digitalocean.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Export necessary stats for traffic flowing through MQPRIO QoS offload
Tx path.

v2:
- No change.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Implement and export UDP segmentation offload (USO) support for both
NIC and MQPRIO QoS offload Tx path. Update appropriate logic in Tx to
parse GSO info in skb and configure FW_ETH_TX_EO_WR request needed to
perform USO.

v2:
- Remove inline keyword from write_eo_udp_wr() in sge.c. Let the
  compiler decide.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

The FW_ETH_TX_EO_WR used for sending UDP Segmentation Offload (USO)
requests expects the headers to be part of the descriptor and the
payload to be part of the SGL containing the DMA mapped addresses.
Hence, the DMA address in the first entry of the SGL can start after
the packet headers. Currently, unmap_sgl() tries to unmap from this
wrong offset, instead of the originally mapped DMA address.

So, use existing unmap_skb() instead, which takes originally saved DMA
addresses as input. Update all necessary Tx paths to save the original
DMA addresses, so that unmap_skb() can unmap them properly.

v2:
- No change.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d.

Ugh, I really dropped the ball on this one :\. So as it turns out RMI4
works perfectly fine on the X1 Extreme Gen 2 except for one thing I
didn't notice because I usually use the trackpoint: clicking with the
touchpad. Somehow this is broken, in fact we don't even seem to indicate
BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even
see any RMI4 events coming from the touchpad when I press down on it.
This only seems to work for PS/2 mode.

Since that means we have a regression, and PS/2 mode seems to work fine
for the time being - revert this for now. We'll have to do a more
thorough investigation on this.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Update FW API minor version to align to current value advertised
by FW in new NVM images.
Signed-off-by: NKevin Scott <kevin.c.scott@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>