- 11 2月, 2016 3 次提交
-
-
由 Nicolai Hähnle 提交于
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
-
由 Nicolai Hähnle 提交于
An arbitrary amount of time can pass between spin_unlock and fence_wait_any_timeout, so we need to ensure that nobody frees the fences from under us. A stress test (rapidly starting and killing hundreds of glxgears instances) ran into a deadlock in fence_wait_any_timeout after about an hour, and this race condition appears to be a plausible cause. v2: agd: rebase on upstream Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
-
由 Flora Cui 提交于
No need to re-init asic if it's already been initialized. Skip IB tests since kernel processes are frozen in thaw. Signed-off-by: NFlora Cui <Flora.Cui@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 08 2月, 2016 16 次提交
-
-
由 Alex Deucher 提交于
Enable vce and uvd pg based on single set of pg flags. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Enable vce and uvd pg based on single set of pg flags. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
So they can be used by powerplay. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Leftover from radeon. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Needed to pass the cg and pg info to powerplay. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Not working reliably yet. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Not working reliably yet. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Not working reliably yet. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Not working reliably yet. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Don't do anything if the uvd cg flags are not set. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
It was already disabled elsewhere, make it offical. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Don't attempt to start/stop the vce block if pg is disabled. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Don't attempt to start/stop the uvd block if pg is disabled. Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
We already query this at driver init, so use that info. Also handles virtualization cases. Reviewed-by: Nmonk liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Pcie registers may not be available in a virtualized environment. Reviewed-by: Nmonk liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Allows the user to force the supported pcie gen and lane config on both the asic and the chipset. Useful for debugging pcie problems and for virtualization where we may not be able to query the pcie bridge caps. Default to: gen: chipset 1/2, asic 1/2/3 lanes: 1/2/4/8/16 v2: fix bare metal case Reviewed-by: Nmonk liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 05 2月, 2016 15 次提交
-
-
git://people.freedesktop.org/~airlied/linux由 Dave Airlie 提交于
displayport multistream fixes from AMD. * 'drm-fixes-mst' of git://people.freedesktop.org/~airlied/linux: drm/dp/mst: deallocate payload on port destruction drm/dp/mst: Reverse order of MST enable and clearing VC payload table. drm/dp/mst: move GUID storage from mgr, port to only mst branch drm/dp/mst: change MST detection scheme drm/dp/mst: Calculate MST PBN with 31.32 fixed point drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil drm/mst: Add range check for max_payloads during init drm/mst: Don't ignore the MST PBN self-test result drm: fix missing reference counting decrease
-
由 Mykola Lysenko 提交于
This is needed to properly deallocate port payload after downstream branch get unplugged. In order to do this unplugged MST topology should be preserved, to find first alive port on path to unplugged MST topology, and send payload deallocation request to branch device of found port. For this mstb and port kref's are used in reversed order to track when port and branch memory could be freed. Added additional functions to find appropriate mstb as described above. Signed-off-by: NMykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Andrey Grodzovsky 提交于
On DELL U3014 if you clear the table before enabling MST it sometimes hangs the receiver. Signed-off-by: NAndrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Hersen Wu 提交于
Previous implementation does not handle case below: boot up one MST branch to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output of 1st MST, GUID is not created for 2nd MST branch. When downstream port of 2nd MST branch send upstream request, it fails because 2nd MST branch GUID is not available. New Implementation: only create GUID for MST branch and save it within Branch. Signed-off-by: NHersen Wu <hersenxs.wu@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Mykola Lysenko 提交于
1. Get edid for all connected MST displays, not only on logical ports, in the same thread as MST topology detection is done: There are displays that have branches inside w/o logical ports. So in case another SST display connected downstream system can end-up in situation when 3 DOWN requests sent: two for ‘remote i2c read’ and one for ‘enum path resources’, making slots full. 2. Call notification callback in one place in the end of topology discovery/update: This is done to reduce number of events sent to userspace in case complex topology discovery is going, adding multiple number of connectors; 3. Remove notification callback call from short pulse interrupt processing function: This is done in order not to block interrupt processing function, in case any MST request will be made from it. Notification will be send from topology discovery/update work item. Signed-off-by: NMykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Harry Wentland 提交于
Our PBN value overflows the 20 bits integer part of the 20.12 fixed point. We need to use 31.32 fixed point to avoid this. This happens with display clocks larger than 293122 (at 24 bpp), which we see with the Sharp (and similar) 4k tiled displays. Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Harry Wentland 提交于
drm_fixp_from_fraction allows us to create a fixed point directly from a fraction, rather than creating fixed point values and dividing later. This avoids overflow of our 64 bit value for large numbers. drm_fixp2int_ceil allows us to return the ceiling of our fixed point value. [airlied: squash Jordan's fix] 32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com> Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Imre Deak 提交于
max_payload is limited by the space we have in drm_dp_mst_topology_mgr::vcpi_mask,payload_mask. We need to track max_payloads+1 IDs in these masks, see drm_dp_mst_assign_payload_id(). Add a sanity check for this. Caught by coverity. Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NDavid Weinehall <david.weinehall@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Imre Deak 提交于
Otherwise this call would have no effect. Caught by Coverity. Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NDavid Weinehall <david.weinehall@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Insu Yun 提交于
In drm_dp_mst_allocate_vcpi, it returns true in two paths, but in one path, there is no reference couting decrease. Signed-off-by: NInsu Yun <wuninsu@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
- fix and enable iceland/topaz support - handle WC on platforms that don't support it * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: disable uvd and vce clockgating on Fiji drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: load MEC ucode manually on iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu/gfx7: enable cp inst/reg error interrupts drm/amdgpu/gfx8: enable cp inst/reg error interrupts drm/amdgpu: mask out WC from BO on unsupported arches drm/radeon: mask out WC from BO on unsupported arches drm: add helper to check for wc memory support drm/amdgpu: no need to load MC firmware on fiji
-
由 Dave Airlie 提交于
Merge tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes two static checker fixes. * tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Remove unnecessary cast in kfree drm/amdgpu: fix non-ANSI declaration of amdgpu_amdkfd_gfx_*_get_functions()
-
由 Dave Airlie 提交于
Merge branch 'exynos-drm-fixes' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Just regression fixes. - Fix build warning and error without PM configuration - Fix no display issue on Snow board reported by Michal Suchanek, http://www.spinics.net/lists/dri-devel/msg99473.html * 'exynos-drm-fixes' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: dp: Fix panel and bridge lookup logic drm: exynos: make PM functions as __maybe_unused drm/exynos: fix building without CONFIG_PM_SLEEP
-
由 Dave Airlie 提交于
Merge branch 'drm/adv7511' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into drm-fixes misc adv7511 edid reading fixes. * 'drm/adv7511' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: drm: adv7511: it's HPD, not HDP drm: adv7511: mark ADV7511_REG_EDID_READ_CTRL volatile drm: adv7511: really enable interrupts for EDID detection
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
misc i915 fixes. * tag 'drm-intel-fixes-2016-02-04' of git://anongit.freedesktop.org/drm-intel: drm/i915: refine qemu south bridge detection drm/i915: Remove select to deleted STOP_MACHINE from Kconfig drm/i915: Fix NULL plane->fb oops on SKL drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+ drm/i915/dp: fall back to 18 bpp when sink capability is unknown drm/i915: Make sure DC writes are coherent on flush.
-
- 04 2月, 2016 1 次提交
-
-
由 Alex Deucher 提交于
Doesn't work properly yet. Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NSonny Jiang <sonny.jiang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 03 2月, 2016 5 次提交
-
-
由 Alex Deucher 提交于
It's working now. bug: https://bugs.freedesktop.org/show_bug.cgi?id=92270Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
The smc doesn't handle it. Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Not validated. Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
topaz is actually gmc7. Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Add the topaz golden settings into the gmc7 module. Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-